Fabrication Painting and erection of 4 Nos of steel shutters and its hoist mechanism at Pallippalam chira in ward No 11 of Thirumaradi Gramapanchayath in Ernakulam District

Amount

Supply and stacking of materials for shutters

od44469/2021_2022/MH : Supply of MS plates confirming to IS 2062GrA/B including cost of conveyance charges

od44470/2021_2022/MH : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Fabrication and supply of structural steel shutters

od44466/2021_2022/MH : Fabrication and supply of structural steel canal shutters and accessories as per approved specifications and direction of deptl officers at site,including cost of labour, machinery,all leads and lifts,incidental and handling charges etc.complete.But excluding cost of material already supplied.

supply and stacking of materials for fabrication of hoist bridge

od44471/2021_2022/MH : Supply of MS plates confirming to IS 2062GrA/B including cost of conveyance charges

od44472/2021_2022/MH : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od44473/2021_2022/MH : Foundation bolt 16mm dia

od44474/2021_2022/MH : Anchoring rod 12mm

od44475/2021_2022/MH : Supply of G.I. pipes 25 mm dia

85.103 : Supply of MS checquered plates including cost of conveyance charges

Fabrication of hoisting bridge

od44460/2021_2022/MH : Fabrication and supply of Hoisting girder structural steel conforming to IS2062Gr as per approved specifications and direction of deptl officers at site,including cost of labour, machinery,all leads and lifts,incidental and handling charges etc.complete.But excluding cost of material already supplied.

Supply and fixing of screw rods dia 63mm

od44461/2021_2022/MH : Providing EN 8 screw rod 7.50 tonn capacity 4.00M lift screw hoist having onenumber of EN 8 screw shaft having a lifting speed of around 5cm/ min for 24 rpm of hand operation includingcost of all materials, hire charges and conveyance (67mm dia)1m screw rod dia 67 mm with single start square thread with head pitch of 12.7mm root dia 62.3 mm EN -8 shaft

Supply and fixing of 4 tonne capacity screw hoist having 1 no of forged steel/EN-8 shaft,suitable worm gear units

od44467/2021_2022/MH : Providing of worm & pinion having a lifting speed of around 5.00 cm/min for 24 rpmof hand operation including cost of all materials, labour, hire charges and conveyance.

Paintig of shutters

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

painting the hoist bridge

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Providing ring Bund

od44462/2021_2022/MH : RING BUND - Putting up ring bund with earth fille gunny bags of top width 1.0mbottom width 1.0m height 1.0 m side and filling in between with earth to form ring bund and maintaining thesame leak proof till the completion of the work and clearing the site by dismantling the bund aftercompletion of the work.etc.complete

Dewatering

60.2.2 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

Scaffoldig

od44463/2021_2022/MH : Scaffolding with first quality bamboo ( 1 score =20 number), tied with heavy dutycoir for chipping & demolising, fixing seal track, centering & shuttering and concreting for seal track and for painting. As per the directions of Departmental officers at site.

Chipping and Demolishing

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Concreting of side wall and top of the pier

4.2.3 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Fabrication and erection of embedded parts

od44464/2021_2022/MH : Fabrication and erection of Embedded parts for Canal shutters(Up to 2 tonneweight) and accessories as per approved specifications, drawings and directions of departmental officer at site including cost of labour , machinery , all leads and lifts ,incidental and handling charges etc completebut excluding cost of material already supplied.

Supply and fixing of rubber seals

od44465/2021_2022/MH : Supplying and fixing in correct position with specified initial interface Ltype/Bulbnose rubber seal confirming to IS 11855 to the canal shutters including cost of MS bolts and nuts,all labour,machinery,incidental and conveyance chargers complete as per approved specification anddrawing

od44468/2021_2022/MH : Supplying and fixing in correct position with specified initial interface the flattyperubber seal confirming to IS 11855 to the canal gates including cost of MS bolts and nuts, all labourandmachinery and incidental and conveyance chargers complete as per approved specification

Erection of shutter and hoist

od44459/2021_2022/MH : Erection of the canal shutter (Up to 2 Tonne weight) /Hoist Bridge /Platform including hand rails . lader etc for the same including, alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance, lead and lift charges etc complete but excluding cost of material already supplied.

Fabtech Engineers and Contractors

ASHIFUL HAK.C

Bidder Name

ASHIFUL HAK.C

Fabtech Engineers and Contractors

SAI ENGINEERING