REPAIR MAINTENANCE OF JOINERY PLUMBING AND SANITARY FITTING WITH CONNECTED ITEMS AND OTHER B and R WORKS AT 217 TRANSIT CAMP PALCHAN

Amount

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n exc 1.50 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm and n. exc 4 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking Down Shutter but exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed by Engineer-in-Charge.

S&F Anodised aluminium frame for doors windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge.

S&F 4.80 mm thick sheet glass ordinary quality and glazing with oil putty in square. exc. 0.5sq.m in each pane including hacking out from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge.

S&F 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in square. exc. 0.5sq.m in each pane including hacking out from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge.

S&F 1st Class wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part , Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.

S&F Flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides as per SSR Part – I complete all as specified and as directed by Engineer-in-Charge.

S&F anodized aluminium door shutter with reqd size of aluminium sections weighing 0.55 kg/m including 5 mm thick tinted glass coloured in half portion and in other half portion 8 mm thick ACP sheet of any colour complete and fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No Hydraulic door closer for each shutter complete all as specified and directed with following specifications:- (a) Aluminium door frame = 64x38 mm (b) Aluminium style/top & middle rails of shutter = 82.5x44 mm (c) Aluminium bottom rail of shutter = 82.5x44 mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and as directed by Engineer-in-Charge.

S&F wooden coloured interlocking tiles 1215x168x8mm thick rectangular in floor / panaling laid in over edsiting floor with foam sheet of approved best quality incld joints /end covering strip incl dismantling complete all as specified and as directed by Engineer-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

S & F mild steel Windows Chajja / wind ties for roof covering including screwing bolts, etc. complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel in Joist, channel, angle, or tee sections, Hollow or round steel tubes, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410 -W (GdeE- 250) quality-A, complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted gaivatume aluminium sheet zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

S&F Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed by Engineer-in-Charge.

M&L for Pre-cast cement concrete block 1:3:6 type C-1 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick on brickwork or concrete surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint, white or tinted complete all as specified and as directed by Engineer-in-Charge.

S&F for 25mm dia MS curtain rod with PVC coating (decorative type) fixed with MS hooks incl side brackets (both side) complete all as specified and as directed by Engineer-in-Charge.

Dismantling wall and ceiling board any of description complete all as specified and as directed by Engineer-in-Charge.

M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling complete all as specified and as directed by Engineer-in-Charge.

S&F Mild Steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed by Engineer-in-Charge.

S&F Extruded aluminium alloy handles, fabricated type, 150mm size complete all as specified and as directed by Engineer-in-Charge.

S & F Aluminium anodised, barrel tower bolts of extruded section and fixed length of bolt 150mm long, complete all as specified and as directed by Engineer-in-Charge.

S & F mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 250mm complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.

M&L for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair wash hand basin vitreous chine white, flat back of size 550X400 mm including cutting for and pinning in ends of brackets or erecting stand (bracket includies) and making good the surface/joints with white cement complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass chromium plated mixer for wash hand basin hot and cold water fancy type fixed with iron pipe 15 mm dia complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts with washers complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 10 Ltrs capacity PVC low level Flushing cistern complete with syphon handle lever PVC bend, flush pipe incl connecting to WC and fixing on walls with bracket complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge.

S&F 15mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15 mm bore chromium plated fancy type brass angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous chine wash down water closet pedestal pattern white complete and connectin to single symphonic action type flushing cistern and fixed in floor with brass screw complete all as specified and as directed by Engineer-in-Charge.

Demolition of PCC in ground floors and pavings n exc 15cm thickness including below or above ground level complete all as specified and as directed by Engineer-in-Charge.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.

M&L for 75mm thick PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) as in subbase of floor complete all as specified and as directed by Engineer-in-Charge.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block with Gery cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35Grade, complete all as specified and as directed by Engineer-in-Charge.

SP Builders

NATHU RAM AND SONS

Kanishka Engineers

M/S SUKHMANI ENGINEERS

kamal electric works

M/S. Vyas Vatika Constructions co.

Arsh Builder

M/S RUDHRAKSH TRADING CO

Kalap Engineers and Builders