REWIRING INCLUDING REPAIR/REPLACEMENT OF FITTINGS AND FIXTURE OF INTERNAL ELECTRIFICATION, REPAIR/MAINT OF CEILING FANS AND GEYSERS INCLUDING REPLACEMENT OF UNSV SPARES AND FIXTURES, REPAIR/MAINT OF COOLING APPLIANCES INCL REPLACEMENT OF UNSV SPARES

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Taking down carefully copper/aluminium point wiring (light, fan socket or power ) complete fitting such as switches , ceiling rose pendent , regulators , sockets light fitting etc to be measured separately) removing material from site and making good disturbed surface of wall floor etc complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm (nominal area) PVC insulated and sheathed multistranded copper conductor cable FRLSH 1100 volts grade drawn in and including PVC casing & capping of suitable size including all accessiries fixed to wall/ceiling including PVC closed recessed boxes ISI marked with 3.00 mm thick plastic laminated sheet top cover as per manufacturer's design for mounting of switches, sockets or regulators etc including 1.50 sqmm (nominal area) PVC insulated and sheathed multistranded copper conductor cable FRLSH 1100 volts grade single core as earth continuity conductor and connected to common earth dolly complete all as specified and as directed for following:-

One light /fan point controlled by one switch.

One bell /buzzer point controlled by one buzzer switch.

One 3 pin socket outlet 5 Amps on same board with other switches.

One 3 pin socket outlet 5 Amps on indpendent board

Ditto as per item No.2 above but with 2.50 sqmm single core multistranded copper conductor cable for 15 Amp socket outlet point on independent board.

S&F switch piano flush type single pole, one way, 5/6 Amps complete all as specified and directed.

S&F socket combination 2 in one , 5 pin 5 Amps flush type, universal complete all as specified and directed.

S&F switch socket combination 2 in one , 5 pin 5 Amps & 15 Amps flush type, universal complete all as specified and directed.

S&F bell push flush type 5 Amps complete all as specified and directed.

S&F call bell ding dong AC 230 Volts single pole complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fitting, straight or angular type complete all as specified and directed.

S&F fan regulator electronic step type 230 V AC 100/150W complete all as specified and directed.

S&F ceiling rose,surface bakelite 65x50mm two to three terminal complete all as specified and directed.

S&F surface and wall mounted E-lite LED curve with wide angle profile high lumen with efficiency of 100 Lumens batten extruded aluminium housing provided for efficient heat dissipation with polycarbonate housing & integrated electronic driver including LED tube light 20 watt 4 feet complete all as specified and directed. Make-Havells Ordering code LUMILINEBS20WLED865SPCWH or equivalent of i) Philips ii) Bajaj iii) Surya

S&F environmental friendly ultra modern energy saving surface mounted decorative round plastic bulk head LED bulk head luminaries suitable for 10 watts LED 6000K and connecting up electrically complete all as specified and as directed. Make-Havells code HEXAFT10WLED857SSYMBOPC or equivalent of i) Philips ii) Bajaj iii) Surya

S&F Recess mounted round shaped LED downlighter with durable housing with AIuminium heat sink with PC diffuser in white powder coated finish with integrated driver to give glare free light with removable driver 15 W LED 6000K complete all as specified and directed. Make- Havells Ordering code INTEGRAGRANDDLR15WLED857MOD or equivalent of i) Philips ii) Bajaj iii) Surya

S& F Recess mounted round shaped LED downlighter with durable housing with AI heat sink with PC diffuser in white powder coated finish with integrated driver to give glare free light with removable driver 25 W LED 6000K complete all as specified and directed. Make- Havells Ordering code ENDURANEODLR25WLED840MOD or equivalent of i) Philips ii) Bajaj iii) Surya

S&F Environmental friendly,slim surface mounted round LED panel die cast body with premium diffuser to ensure glare free and even distibution of light for 18 watt LED 6000K lamp including lamp complete all as specified and directed. Make-Havells ordering code EDGEPRORDDLR18WLED840S or equivalent of i) Philips ii) Bajaj iii) Surya

S&F Environmental friendly,slim recess mounted square opal LED panel polycarbonate body with opal diffuser to ensure glare free and even distibution of light for 18 watt LED 6000K lamp including SS spring clip complete all as specified and directed. Make-Havells ordering code LEDDRIVER36V18WS or equivalent of i) Philips ii) Bajaj iii) Surya

S&F sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 4 way with 200 amps rated bus bar SPN double door complete all as specified and directed.

S&F sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 8 way with 200 amps rated bus bar SPN double door complete all as specified and directed.

S&F MCB single pole 5 amps to 32 amps , B series complete all as specified and directed. Note:- MCB Rating shall be suitable to the existing DB .

S&F MCB single pole & neutral 240 volts 5/6 to 30 Amps, 10 KA , C Series complete all as specified and directed. Note:- MCB Rating shall be suitable to the existing DB.

S&F ceiling fan 1200 mm sweep AC 230 volts single phase including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed. Make: Usha Model APOLLO LX or Equivalent of i) Crompton Greaves ii) Bajaj iii) Orient

M&L for submain wiring with two runs of PVC insulated multistranded, copper coductor of size 4 Sqmm cable single core 1100 Volts Grade and one run of earth continuity conductor cable of 4 Sq mm solid strand cable drawn in and incl 30/32 mm PVC casing caping complete all as specified and as directed. Note:- 2 run of 4sqmm cable+ 1 run of 4sqmm earthed cable+ 1 run of casing capping shall be measured as one unit.

M&L for submain wiring with two runs of PVC insulated multistranded, copper coductor of size 6 Sqmm cable single core 1100 Volts Grade and one run of earth continuity conductor cable of 6 Sq mm solid strand cable drawn in and incl 30/32 mm PVC casing caping complete all as specified and as directed. Note:- 2 run of 6sqmm cable+ 1 run of 6sqmm earthed cable+ 1 run of casing capping shall be measured as one unit.

S&F metal clad socket out let with MCB single pole 20 Amp including sheet metal enclosure complete 2nd class hard wood wooden board including complete electrical connection by proper size of copper lugs complete all as specified and directed.

M&L for earthing with galvanised iron earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below ground level) with top edge of the earth plate not less than 1.5 metre below ground level surrounded from all sides 15 mm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using earth lead GI wire 4mm dia(8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to common earth dolly and protected by galvanised iron light grade pipe 15 mm bore in wall/floor and including 20 mm galvanised pipe for watering with funnel and wire mesh all as specified or indicated including excavation and connected earth work, in soft/loose soil, PCC 1:3:6 type C1 using 20mm graded stone aggregate as in pit and RCC 1:2:4 type B1 cover for earth pit cover reinforced with 8 mm dia TMT Bars @ 75mm C/C both ways and with handle made out of 08mm dia bars, GI funnel, strainer, including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part I and testing on completion , complete all as specified and directed.

S&F fan capacitor, AC 230 V, 2.5 MFD complete all as specified and directed. Make- Havells Cat Part- QHPCWC5002X5 or equivallent.

S&F fan capacitor, AC 230 V, 3.15 MFD all as specified and directed. Make- Havells Cat Part- QHPCWC5003X1 or equivallent.

S&F PVC casing & capping with fittings, ISI marked, 25 mm size complete all as specified and directed.

S&F PVC casing & capping with fittings , ISI marked, 32 mm size complete all as specified and directed.

S&F cable FRLS PVC insulated, single core, 1100 Volts, 1.5 Sqmm complete all as specified and directed. Make- Havells Cat No- WHFFFN…A11X5 or equivalent of (I) FINOLEX (II) NICCO (III) KEI (IV) POLYCAB (V) RR KABEL LTD

S&F cable FRLS PVC insulated, single core, 1100 Volts, 2.5 Sqmm complete all as specified and directed. Make- Havells Cat No- WHFFFN…A12X5 or equivalent of (I) FINOLEX (II) NICCO (III) KEI (IV) POLYCAB (V) RR KABEL LTD

S&F cable FRLS PVC insulated, single core, 1100 Volts,4.0 Sqmm complete all as specified and directed. Make- Havells . Cat No- WHFFFNA14X0 or equivalent (I) FINOLEX (II) NICCO (III) KEI (IV) POLYCAB (V) RR KABEL LTD

S&F MCCB, AC 415 V, 100 Amp,16 KA 4 Pole fixed thermal and magnetic setting complete all as specified and directed.

S&F MCCB, AC 415 V, 200 Amp,35KA 4 Pole fixed thermal and magnetic setting complete all as specified and directed.

S&F 10W LED new adore 10W B22 cool day light ball lamp all as specified and directed.

S&F 15W LED new adore 15W B22 cool day light ball lamp all as specified and directed.

S&F twin twisted flexible cable, PVC insulated with stranded copper conductor of size 14/0.0052, AC 1100 volts grade complete all as specified and directed.

S&F twin twisted flexible cable, PVC insulated with stranded copper conductor of size 14/0.0076, AC 1100 volts grade complete all as specified and directed.

Supply, fixing and passing through service bracket, 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart incl 4mm suspension wire one twin core cable of size 10 Sqmm including taking down old complete all as specified and directed.

S&F New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs 25watt as light source complete all as specified and directed. Make-Havells ordering code 25W5700K CORALPT35WLED757PSYMTOPC or equivalent of i) Philips ii) Bajaj iii) Surya

Disconnecting / taking down water heaters (Geysers) of any make & capacity, horizontal or vertical type their existing locations, for carrying out overhauling / repairs from complete all as specified and directed.

Overhauling, repairing, reassembling, refixing, installation of water heaters / Geysers to their original position, making all necessary water & electric connections and testing complete all as specified and directed. Note-(Parts renewed shall be measured and paid separately under relevant items).

Supply only heating element 1.5 KW (ISI Marked) suitable for geyser of 25 litres capacity, horizontal or vertical type complete all as specified and directed.

Supply only heating element 2 KW (ISI Marked) suitable for geyser of 50 litres capacity, horizontal or vertical type complete all as specified and directed.

Supply only thermostat (ISI Marked), minimum 300 mm long, suitable for geyser 25/50 litres capacity horizontal or vertical type complete all as specified and directed.

Supply only indicating lamp (ISI Marked) for geysers complete all as specified and directed.

Supply only door assembly (ISI Marked) comprising of inlet & outlet thermostat housing with gasket complete with bolts, nuts, washers, washers screws & packing etc. suitable for 25 litres capacity horizontal or vertical geysers complete all as specified and directed.

Supply only door assembly (ISI Marked) comprising of inlet & outlet thermostat housing with gasket complete with bolts, nuts, washers, washers screws & packing etc. suitable for 50 litres capacity horizontal or vertical geysers complete all as specified and directed.

Supply and filling up glass wool (ISI Marked) for geysers of 25 litres capacity complete all as specified and directed.

Supply and filling up glass wool (ISI Marked) for geysers of 50 litres capacity complete all as specified and directed.

M&L for repairing leakage of inner copper/stainless steel tank of geyser (any make), 25 litres capacity by brazing including all necessary denting etc. complete all as specified and directed.

M&L for repairing leakage of inner copper/stainless steel tank of geyser (any make), 50 litres capacity by brazing including all necessary denting etc. complete all as specified and directed.

M&L for painting old surfaces of geysers of 25/50 litres capacity of any make with one coat of synthetic enamel paint of approved shade or tint after necessary preparation of surfaces and writing of MES Nos as approved size of letter all as specified and directed.

Renewal of inner stainless steel container of geyser (any make), 25 litres capacity by brazing including all necessary asseccories etc. complete all as specified and directed.

Renewal of inner stainless steel container of geyser (any make), 50 litres capacity by brazing including all necessary asseccories etc complete all as specified and directed.

S&F top cover of geyser suitable for 25 Ltr cap complete with screw, washer etc complete all as specified and directed.

S&F (in repair) for PVC connection 15 mm dia with brass ferule both end length 450 mm complete all as specified and directed.

Supply only twisted flexible cord PVC insulated, 3 core, 23/0.0076 complete all as specified and directed.

S&F (in repairs) fancy type chromium plated stop cock with brass spindle & with crutch or butterfly handle screwed down high pressure suitable for 15 mm bore GI tubing complete all as specified and directed.

S&F Bib taps, cast copper alloy with crutch handle, screwed for 15 mm bore dia iron pipe or for brass ferrule complete all as specified and directed.

S&F fuseable plug suitable for any type of storage water heater of any make capacity complete all as specified and directed.

S&F (in repairs) Gun metal non-return valve,suitable for 15 mm bore GI tubing complete all as specified and directed.

S&F pressure releasing safety valve ISI marked complete all as specified and directed.

S&F plug top polycarbonate 3 pin, 16 Amp complete all as specified and directed. Make-Anchor Cat No-38637 or equivalent of (I) HAVELLS ((II) LEGRAND (III) SCHNIEDER

Supply,installation testing and commissioning of storage type water heater 25 ltrs capacity vertical mounting type complete made out of CRCA outer body, stainless steel storage tank, heating element,thermostat,thermal cut out, glass wool etc. complete including making necessary electrical connections with suitable size copper multistranded cable complete all as specified and directed. Make-USHA Model No-MISTY 25 LITRES DIGITAL or equivalent of (I) BAJAJ (II) CROMPTON GREAVES (III) JAQUAR & COMPANY PVT LTD

S&F in repairs prepainted inspection plated rounded in two pieces made out of 22 gauge MS sheet and with fixing space for indicating lamp of any type and make of Geyser 25/50 ltrs capacity including fixing screws complete all as specified and directed.

Dismantling any type and capacity of geysers and re-fixing after descalling of geyser tank 25/50 Ltr capacity including geysers and element holding assembly complete all as specified and directed.

S&F Sheet metal enclosures Single door SPN, 2 ways suitable for mounting MCB complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps, 240 Volts to be housed in DBs catered here in after complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are including in unit rate of each MCB of any rating)

Taking up or down steel tubing and connections, including removal of 15 mm bore complete all as specified and directed. Note-(Excavation and earthwork shall be measured and paid separately under relevant item).

Supplying, laying, jointing and testing 15 mm nominal bore steel water tubes'medium grade', galvanised, with all fittings, laid in trenches or fixed to wall complete all as specified and directed.

Refixing old steel tubing and connections in new and old position walls,ceiling, floors etc.) of following bore complete all as specified and directed.

S&F GI nipple, 15 mm bore, medium grade upto 150 mm length complete all as specified and directed.

Disconnecting of ceiling fans of 1200/1400 mm sweep from ceiling rose/connector for cleaning,servicing /oiling and greasing of fan by using appropriate grade of oil/grease and re-hanging the same after proper cleaning and making connection with ceiling fan/connector with flexible wire of size 23/0076 copper conductor multi stranded complete all as specified and directed.

Disconnecting of ceiling fans of 1200/1400 mm sweep from ceiling rose/connector for re-winding,servicing /oiling and greasing of fan by using appropriate grade of oil/grease and replacing defective parts such as bush bearing , split pin rubber bush, capacitor etc and re-hanging the same after proper cleaning and making connection with ceiling fan/connector with flexible wire of size 23/0076 copper conductor multi strandedcomplete all as specified and directed. (NOTE :- Parts/spares will measured and paid separtely under relevant item of the schedules).

Rewinding of ceiling fan 1200 mm sweep AC 230 volts single phase with super enamelled copper winding wire of appropriate / existing gauge / size including packing, insulating material soldering varnishing, assembling and testing material soldering varnishing, assembling and testing including transportation charges to and from contractor's workshop complete all as specified and directed.

Rewinding of ceiling fan 1400 mm sweep AC 230 volts single phase with super enamelled copper winding wire of appropriate / existing gauge / size including packing, insulating material soldering varnishing, assembling and testing material soldering varnishing, assembling and testing including transportation charges to and from contractor's workshop complete all as specified and directed.

S&F bearing of ceiling fans for ceiling fans of 1200/1400mm sweep to suit for different makes of fans of approved quality including necessary greasing complete all as specified and directed. Make- NBC/SKF/NORE/TATA

S&F bushes gun metal suitable for ceiling fans 1200/1400mm sweep complete all as specified and directed.

S&F rubber bushes and reel type synthetic rubber with 14.5 mm hole suitable for fan hooks for hanging of ceiling fans complete all as specified and directed.

S&F split pins of galvanised iron 1/8" dia, 2 length all as approved by Engr in charge complete all as specified and directed..

S&F down rod 30cms long made out of heavy grade MS pipe with necessary threading at both ends holes as required with suitable matching colour of ceiling fan 1200/1400mm complete all as specified and directed.

S&F top/bottom canopy of required size complete with tightening screws complete all as specified and directed.

S&F condenser/capacitor suitable for 230 volts single phase ceiling fan 1200mm /1400 sweep of any make and quality of capacity 2.5 MFD complete all as specified and directed. Make- Bajaj/Havells/Usha.

S&F condenser/capacitor suitable for 230 volts single phase ceiling fan 1200mm /1400 sweep of any make and quality of capacity 3.15 MFD complete all as specified and directed. Make- Bajaj/Havells/Usha

S&F condenser/capacitor suitable for 230 volts single phase exhaust fan 300mm to 450 sweep of any make and quality of capacity 4 MFD complete all as specified and directed. Make- Bajaj/Havells/Usha

Painting of ceiling fan 1200/1400mm sweep AC 230 volts single phase complete in situ or at contractor workshop with synthetic enamelled white/matching paint by spraying one cost including filling of cavities after cleaning all dust and marking SM/MES NO with black enamelled paint complete all as specified and directed.

S&F body screw and blade screw of ceiling fan 1200mm/1400 mm sweep off sizes complete all as specified and directed.

Taking down exhaust fans any size, sealing cable end, and dismantling blade and removing fan and blade to contractor workshop for repair/overhauling/painting etc complete all as specified and directed.

Rewinding of exhaust fan 300mm to 450mm sweep AC 230 volts single phase with super enamelled copper wire of appropriate size including packing insulating material, soldering, varnishing, assembling and testing including transportation charges to and fro from contractor's workshop complete all as specified and directed.

S&F ball bearing suitable for exhaust fan 300 to 450mm sweep of different Makes complete all as specified and directed. Make- NBC/SKF/NORE/TATA

S&F fan blade (ISI Marked) complete with tightening bolts/screws, made of aluminium suitable for any make and colour of exhaust fan complete all as specified and directed. Make- Bajaj/Havells/Usha/CG

Painting of Exhaust fan 300 to 450 mm sweep AC 230 volts single phase complete with synthetic enamelled white/grey/matching paint by spraying one coat including filling of cavities after cleaning all dust and marking SM/MES NO with black enamelled paint complete all as specified and directed.

Fixing only exhaust fan 300 mm to 450 mm and connecting up including provision of flexible copper cable 23/0.0076 from ceiling rose or connector to fan complete all as specified and directed.

S&F Exhaust fan 300 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed. Make: Usha Model AEROCLEAN PLUS DBB GBD or Equivalent of i) Crompton Greaves ii) Bajaj iii) Orient

S&F Exhaust fan 380 mm sweep (Heavy duty) AC 230 volts single phase 900 RPM with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed. Make: Usha Model 380MM S.PH Turbo HDEF 900RPM ISI or Equivalent of i) Crompton Greaves ii) Bajaj iii) Orient

S&F Exhaust fan 450 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed. Make: Usha Model 450MM S.PH Turbo HDEF 900RPM ISI or Equivalent of i) Crompton Greaves ii) Bajaj iii) Orient

S&F Exhaust fan fresh air 250 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed. Make: Usha Model CRIPS AIR EXH FAN or Equivalent of i) Crompton Greaves ii) Bajaj iii) Orient

Dismantling of defective condensing unit of split type AC of 1.5 TR capacity and supply & fixing new condensing unit complete with condensing coil, coil frame , wiring kit and running capacity , relay condensing motor with blade complete all as specified and directed. Make:(I) BLUE STAR (II) VOLTAS (III) HITACHI (IV) DAIKIN (V) CARRIERS

Dismantling of defective indoor unit of 1.5 TR capacity split type AC and supply & fixing indoor unit of the same capacity with blower motor.Front grill and connecting the copper tubing by brazing detecting leak and rectifying the same and recharging with Non CFC refrigerant gas as required the unit in wall/ ceiling mounted complete all as specified and directed. Make of indoor unit :(I) BLUE STAR (II) VOLTAS (III) HITACHI (IV) DAIKIN (V) CARRIERS

M&L for servicing by means of electric blower and water under pressure cleaning & washing of condensing coil /cooling coil by soap solution or recommended chemical, oiling & greasing of moving parts such as blower motor etc. complete of 1.5 TR capacity window type AC complete all as specified and directed.

M&L for servicing by means of electric blower and water under pressure cleaning & washing of condensing coil /cooling coil by soap solution or recommended chemical, oiling & greasing of moving parts such as blower motor etc. complete of 2.0 TR capacity window type AC complete all as specified and directed.

Dismantling of burnt blower motor of 1.5 TR split AC (indoor unit) and supply & fixing blower motor of same manufacturer of AC of make of AC Carrier/Voltas /Blue star as per sample complete all as specified and directed.

Supply and charging (Top up) the AC unit of 1.5 TR/ 2 TR split type AC unit with non CFC latest refrigerant available in the market as per govt policy all as specified and directed in required Qty ccomplete all as specified and directed.

S&F suction valve size 1/2" complete all as specified and directed.

S&F discharge valve size 1/4'' complete all as specified and directed.

S&F rubber coupling mounting for blower motor of split type AC all as per directed by EIC of existing make and model complete all as specified and directed.

S&F air filter made out Nylon suitable for 1.5 TR split/window AC capacity air conditioners of any existing Make and model complete all as specified and directed.

Carrying out pressure leak test of split Acs 1.5 /2.0 TR by Nitrogen gas pressure for detecting leak in cooling unit refrigerant pipe and repairing the leak by welding or brazing of cooling unit and refrigerant pipe , putting under pressure for leak test and rectifying the leakage if any in pipes including gas charging transporting & Tools and Plant required at site complete all as specified and directed.

Carrying out pressure leak test of window type ACs 1.5 /2.0 TR by Nitrogen gas pressure for detecting leak in cooling unit refrigerant pipe and repairing the leak by welding or brazing of cooling unit and refrigerant pipe , putting under pressure for leak test and rectifying the leakage if any in pipes including gas charging transporting & Tools and Plant required at site complete all as specified and directed.

Dismantling of defective worn out wiring of indoor unit of window/split AC of capacity 1.5 TR/2TR, Supply and fixing PCB ( Printed circuit Board) set to suit/match the existing system complete all as specified and directed.

Dismantling of defective worn out visual eye demo plate of indoor unit of window/split AC of capacity 1.5 TR/2TR remote hand set to suit/match the existing system complete all as specified and directed.

Replacement of defective remote hand set of window/split AC of capacity 1.5 TR/2TR to suit/match the existing system complete all as specified and directed.

S&F hermatically sealed rotory compressor suitable for window type AC 1.5 TR (original sealed unit is to supply) of specified make as approved by GE including first fill of latest refrigerant available in the market as per govt policy complete all as specified and directed.

S&F hermatically sealed rotory compressor suitable for split type AC of capacity 1.5/2.0 TR (original sealed unit is to supply) of specified make as approved by GE including first fill of latest refrigerant available in the market as per govt policy complete all as specified and directed.

S&F in replacement sheet metal enclosure with metallic socket and MCB single pole 32 Amp and metallic plug top connected from mains to AC of capacity 1.5/2.0 TR complete all as specified and directed.

S&F repairs metallic plug top of 16 Amps connected from mains to AC complete all as specified and directed.

Dismantling of defective cooling coil of 1.5 TR window type AC of any make and S&F cooling coil for AC, detecting the leakage with N2 Gas , reconnecting in to the system complete all as specified and directed.

Dismantling of defective condensing coil of 1.5 TR window type AC of any make and S&F condensing coil for AC, detecting the leakage with N2 Gas, reconnecting in to the system complete all as specified and directed.

Dismantling of burnt blower motor of 1.5 TR /2 TR window AC and supply & fixing new blower motor, double shaft, 1/6 or 1/8 HP as per sample complete including making necessory electrical connection with suitable size copper conductor wire complete all as specified and directed.

Dismantling of burnt fan motor of 1.5 TR/ 2 TR split AC (outdoor unit) and supply & fixing new blower motor, as per sample complete including making necessory electrical connection with suitable size cooper conductor cable complete all as specified and directed.

S&F aluminium blower/fan blade with alminium alloy bush, screw for window Acs complete as required at sitecomplete all as specified and directed.

S&F PVC knob of window type AC complete all as specified and directed.

S&F repairs front grill quantity for window AC of 1.5 TR /2TR of Make National / Cosmo complete all as specified and directed.

S&F PVC insulated three core stranded copper cable of size 80/20 complete all as specified and directed.

S&F starting capacitor of 80-120 Mfd capacity in plastic /metal container complete all as specified and directed.

S&F starting capacitor of 120-150 Mfd capacity in plastic /metal container complete all as specified and directed.

S&F running capacitor 36 Mfd to 50 Mfd capacity in plastic container complete all as specified and directed.

S&F starting relay for 1.5TR/2 TR compressor complete all as specified and directed.

S&F over load protector for 1.5TR/2TR compressor complete all as specified and directed.

S&F thermostate switch for 1.5TR/2TR split AC complete all as specified and directed. Make:Indfoss or Equivalent.

S&F swing motor for 1.5TR/2TR Indoor unit of any make of existing capacity complete all as specified and directed.

S&F Swing motor for 1.5TR/2TR window type AC complete all as specified and directed.

S&F Reverse cycle solenoid valve in split/window type AC 1.5 /2 TR capacity with necessary extension to suction / discharge copper tubbing & toggle switch complete all as specified and directed.

S&F Suction copper pipe line heavy duty 1/2'' dia with puff insulation and flair nuts from indoor to outdoor unit of split AC 1.5 /2 TR capacity complete all as specified and directed.

S&F Suction copper pipe line heavy duty 1/4'' dia with puff insulation and flair nuts from indoor to outdoor unit of split AC 1.5TR/2TR capacity complete all as specified and directed.

S&F PVC pipe nylon embraided 15 mm dia for condenser water drain with clamps/ concealed in wall complete all as specified and directed.

S&F Copper Gas filter for AC 1.5TR/2TR capacity complete all as specified and directed.

Taking out compressor from water cooler of existing make by cutting of suction and discharge lines for carrying out necessary repairs to the water cooler base such as renewal of MS angle iron , base plate, nuts , washers, bolts,rubber grooves and refixing it including painting with two coats of synthetic enamel paint of existing shade complete all as specified and directed. of following capacities of water coolers:-

40/40 litres/Hrs

40/80 litres/Hrs

Dismantling of unserviceable compressor of existing make/model from water cooler including disconnecting suction/discharge copper tubing and supply & fixing new compressor (sealed unit) with nuts, bolts, rubbers grommet and washer, connecting copper tubing by welding flare nuts,including charging of latest refrigerant available in the market as per govt policy in required quantity for 40/40 ltrs/Hrs capacity water cooler of existing make & Model complete all as specified and directed.

Ditto all as item No-143 above but of capacity 40/80 ltrs capacity.

Dismantling of compressor of existing make/model from water cooler including disconnecting suction / Discharge copper tubing and detecting leak and repairs if any flushing and pressure testing by nitrogen & etc. vacuumising, charging of latest refrigerant available in the market as per govt policy in required quantity for 40/40 ltrs/Hrs capacity water cooler of existing make & Model complete including connecting copper tubing by welding flare nuts complete all as specified and directed.

Ditto all as item No-145 above but of capacity 80/40 ltrs capacity.

Ditto all as item No-145 above but of capacity 150 ltrs capacity.

S&F CP Brass push cock (inner or outer threaded) of 15 mm bore size complete all as specified and directed.

Renewal of 32 mm PVC pipe with clip and strainer tee elbow complete all as specified and directed.

S&F (in repairs) starting relay for 40 ltrs/hr water cooler complete all as specified and directed.

S&F starting relay for 80 ltrs/hr water cooler complete all as specified and directed.

S&F running capacitor (conforming to IS:2993 - 1975) AC 240 volts in plastic container of following capacities complete all as specified and directed.

S&F overload protector for 40/80 ltrs water cooler complete all as specified and directed .

S&F wiring loom for water cooler complete all as specified and directed.

S&F Thermostat long/short tail for water cooler complete all as specified and directed.

Taking out defective blower motor with blade and supply & fixing new blower motor with blade AC 240 volts, 50 HZ single phase, for water cooler 40/80 ltrs complete all as specified and directed.

S&F of condensing coi(ISI marked)l for 40/80 ltrs water cooler complete all as specified and directed.

M&L for disconnecting of water cooler of 40/80 ltrs capacities from its position, taking out water from its water tank, cleaning of water tank by washing with washing powder and with fresh water externally and internally and spray painting with synthetic enamel paint of approved tint/colour to all painted surface of water cooler after preparation of old painted surfaces without disturbing the components & wiring etc. complete and reconnceting complete all as specified and directed.

S&F in repairs water tray for water cooler of 40/80 ltrs made out of stainless steel complete all as specified and directed.

Renewal of PVC inner liner of front door of following capacities of refrigerators including glass wool packing and making other petty repairs complete all as specified and directed.

165/ 170 / 180 litres capacities

286 litres/ 300 litres / 310 litres

M&L for spray painting with two coats of synthetic enamel paint of approved tint/colour to outer surface of refrigerator of following capacities on all three outer sides after preparation of old painted surfaces and without disturbing the components & wiring etc complete all as specified and directed.

165/180 litres capacities

286 /300/310 litres capacities

Checking of leakage in refrigerant system of refrigerator of following capacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuuming the system including charging refrigerant gas Non CFC in required quantity complete all as specified and directed.

165 / 170 / 180 litres capacities

286 /300 / 310 litres capacities

S&F starting relay, open type for refrigerator of capacity 165/170/180/300/310 litres complete all as specified and directed.

S&F over load protector for 1/6 HP refrigerator of capacity 165/300 /310 litres complete all as specified and directed.

S&F thermostat defrost type for refrigerator complete all as specified and directed.

S&F thermostat non defrost type for refrigerator complete all as specified and directed.

S&F door gasket for refrigerator(ISI Marked) of following capacities complete all as specified and directed.

165 / 170 / 180 litres capacities

286 /300 /310 litres capacities

S&F vegetable basket with glass suitable for refrigerator of following capacity complete all as specified and directed.

165 / 170 / 180 litres capacities

286 /300 / 310 litres capacities

S&F defrost tray (Plastic) as per sample for following capacity of refrigerator complete all as specified and directed.

165 / 170 / 180 litres capacities

286 /300 / 310 litres capacities

S&F copper capallery for water cooler, refrigerator and deep freezer of any sizy / capacity complete all as specified and directed.

Checking of leakage in refrigerant system of deep freezer of 200 / 300 litres capacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuming the system including charging refrigerant gas Non CFC in required quantity complete all as specified and directed.

S&F Fan Motor of deep freezer, 230Volts rating, AC, Single Phase, 50 Hz including disconnection and reconnecting and testing complete all as specified and directed.

Renewal of Door gasket of deep freezer of any make of capacities 300/310 litres complete all as specified and directed.

Dismantling of old rusted flexi glow sign board of any description from various installations under AGE Charduar and M&L for glow sign board made out of MS angle iron box of size 7.25Mx1.20Mx0.3M fabricated with MS flat angle of size 40x40x5mm by means of cutting or welding in shape with 0.7mm thick Aluminium sheet on one side and blue acrylic sheet 2mm thick on other side in background and writing letter as directed by Engr-in-Charge such as “PUMP HOUSE/SUB STATION NO, MILITARY ENGINEER SERVICES, GARRISON ENGINEER (N) TEZPUR” with white acrylic sheet of suitable size as directed by Engr-in-Charge including 1x20 watt 4’ LED light fitting and making electrical connections with copper multistranded PVC insulated wire of nominal dia 1.5 sqmm single core and fixing/grouting it at suitable height as directed at site by means of all welding/grouting in PCC and other materials such as angle iron/GI or MS pipe etc all as required at site and testing on completion of job complete all as specified and directed.

Supply and replacement of multi stage pump single phase 230 volts 50 Hz of capacity 1.5 kW of existing model suaitbale for maximum water temperature 70 degree thermally protected for reverse osmosis plant of one hundred fifty litre per hour including making all electrical and water supply connections and testing on full load and dismantling of old/unsv pump complete all as specified and directed.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed. Make:V Guard/Vinitec or Equivalent.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed. Make:V Guard/Vinitec or Equivalent.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1KVA complete all as specified and directed. Make:V Guard/Vinitec or Equivalent.

Supply and replacement of DOL starter suitable for three phase 2 HP motor of air compressor including making all electrical connections and testing on full load and dismantling of old/unsv starter complete all as specified and directed.

Collection of unserviceable voltage stabilizers of any make of following capacities from AGE store yard & transporting it to local workshop , dismantling the stabilizer for repairs of the defective parts/ spares & reassembling including repair of defective screws, rubber shoes, testing & painting with two coats of synthetic enamelled paint after removing old paint and repairs body etc. depositing back to MES stores yard complete all as specified and directed. (Note :-Spares/ parts renewed shall be measured paid for separately under relevant item )

Supply only relay 25/30 Amps 24 Volts for 4 KVA/5KVA voltage Stabilizer complete all as specified and directed. Make :- Dunmag, Eaglemen, Powerman or Equivalent.

Supply only Relay for 1KVA/2 KVA voltage Stabilizers complete all as specified and directed. Make :- Dunmag, Eaglemen, Powerman or Equivalent.

S&F connector for IN-Out supply of voltage stabilizer 32 Amps with earth connection complete all as specified and directed.

S&F porcelain cutout of same size capacity as existing of 16 Amp each connection complete all as specified and directed.

S&F porcelain cutout (Kit-Kats) 32 Amps/240 volts complete all as specified and directed.

S&F indication lamp in voltage stabilizers of any capacity complete all as specified and directed.

S&F 2 Meter long conductor cable 3 core PVC insulated and sheathed 80/0.20 (2.5 sqmm) size duly fitted with 3 pin top, 20 Amps complete all as specified and directed.

S&F AC volts meter, square/round type, 0-300 volts suitable for 2KVA / 4 KVA / 5 KVA single phase stabilizer complete all as specified and directed.

S&F (in repair) power transformer suitable for Voltage stabilizer of make Blue Bird/ Vinitec / Servel suitable for following capacity duly winded with suitable size super enamelled copper wire and testing complete all as specified and directed.

4 KVA / 5 KVA

S&F Main PCB with high & low voltage cut off suitable for voltage stabilizers complete all as specified and directed.for following capacity:-

4 KVA / 5 KVA

Rewinding of main power transformer of following capacities Voltage stabilizer, with suitable size of supper enamelled copper wire and fixing & testing complete all as specified and directed.

4 KVA / 5 KVA

KAILSON

M/S JALALUDDIN AHMED