Kerala

Financial BO

Works

Electrical Works

29th JCB action plan SITC of 25 KVA DG set and electrification for Siruvani Dam Installation

Irrigation Department

Palakkayam | Palakkad, Kerala

Amount: ₹14.6 LCloses: 20 Jul 2026Closed

Timeline

Published10 Jul 2026
Closed20 Jul 2026
Financial Evaluation—
Award—

Tender Value

₹14.6 L

EMD Value

₹36,544

Closing Date

20 Jul 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer,KPIP Divisin No.1, Kanhirapuzh

Address

Office of the Executive Engineer,KPIP Divisin No.1, Kanhirapuzha 678591

Work Description

29thJCBactionplanSITC of25KVADGsetand electrificationforSiruvani DamInstallationofDsetand electrificationforIntake valveatSiruvani DamGeneral Electrical Work

Tender Information

Tender ID

2026_Irrig_860049_1

Reference Number

PWD/BLDG/TR/3158/2025_6_1_1/1

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Item Rate

Period of Work

120 days

Location

Palakkayam

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical/Finance

RequiredBid submission fee (.pdf)

Requiredvalid registration certificate (.pdf)

Requiredbidsubmissionletter (.pdf)

Requiredpreliminary Agreement (.pdf)

RequiredIntegritypact (.pdf)

Requiredaffidavit (.pdf)

Requiredrequisition of e payment (.pdf)

RequiredAny other relevant information (.pdf)

Requiredboq (.xls)

Requiredbid document with nit (.pdf)

RequiredMake of materials (.pdf)

Fee & Financial Details

Tender Fee Amount

₹2,670

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹36,544

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

22 Jul 2026

Published

10 Jul 2026

Bid Opening

22 Jul 2026

Download Starts

10 Jul 2026

Download Ends

20 Jul 2026

Submission Starts

10 Jul 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (102 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1SITC of 25 KVA DG set and panel board
1.001	90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)	-	sqm	-	-
1.002	90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.	-	sqm	-	-
1.003	90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet	-	metre	-	-
1.004	90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)	-	metre	-	-
1.005	90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board	-	kg	-	-
1.006	OD264084/2024-2025:Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for cable trays made out of suitable size channel sections, slotted angles,flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colourwashing etc as required.-	-	kg	-	-
1.007	90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.	-	Cum cm	-	-
1.008	90.14.7:Supply and providing copper earth bus in the panel board	-	Cum cm	-	-
1.009	OD340100/2025-2026:Supply and fitting Digital Multifunction meter to read V, A, F, 3 phase accuracy class 1	-	each	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.01 MB

Bid Opening Summary

finance_1454329.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.07 MB

Work Item Documents

nit.pdf

Tender Documents • 0.05 MB

BOQ_1454329.xls

BOQ • 0.38 MB

SBD.pdf

Tender Documents • 1.73 MB

Makeofmaterials.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1SITC of 25 KVA DG set and panel board
1.001	90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)	-	sqm	-	-
1.002	90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.	-	sqm	-	-
1.003	90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet	-	metre	-	-
1.004	90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)	-	metre	-	-
1.005	90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board	-	kg	-	-
1.006	OD264084/2024-2025:Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for cable trays made out of suitable size channel sections, slotted angles,flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colourwashing etc as required.-	-	kg	-	-
1.007	90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.	-	Cum cm	-	-
1.008	90.14.7:Supply and providing copper earth bus in the panel board	-	Cum cm	-	-
1.009	OD340100/2025-2026:Supply and fitting Digital Multifunction meter to read V, A, F, 3 phase accuracy class 1	-	each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1SITC of 25 KVA DG set and panel board

1.001

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

sqm

1.002

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

sqm

1.003

90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

metre

1.004

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

metre

1.005

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

1.006

OD264084/2024-2025:Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for cable trays made out of suitable size channel sections, slotted angles,flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colourwashing etc as required.-

1.007

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

Cum cm

1.008

90.14.7:Supply and providing copper earth bus in the panel board

Cum cm

1.009

OD340100/2025-2026:Supply and fitting Digital Multifunction meter to read V, A, F, 3 phase accuracy class 1

each