REPAIR/ REPLACEMENT OF JOINERY, BRICK WORK, PLASTERING, FLOORING, TILING, INTERNAL WATER SUPPLY, SEWAGE LINE, PERIODICAL SERVICES AND MISC WORK IN MD ACCN OF MAP/SURYA LINE AREA UNDER AGE B/R-II AT CLEMENT TOWN, DEHRADUN

Amount

M&L for coloured Glazed ceramic tiles in vertical surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar 1:4 incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 10mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 10mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 incl roughening surface of old concrete/terrazo floor by peecking sweeping clean and washing down with water to remove dust etc complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 10mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed

M&L for providing 40mm thick cement concrete 1:2:4 type B1 (using 20mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth without using extra cement incl demolition of cement concrete complete all as specified and directed

S&F 3mm thick and 38mm wide glass dividing strips as in floors inserted in position, conform to design complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete incl demolition of brick work built in cement mortar complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone msonary wall including racking of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty on walls complete all as specified and directed

M&L for 10mm thick plaster in ceiling of CM 1:3 on brick walls finished even and smooth without using extra cement incl taking down cement plaster from ceiling including scrubbing down with water etc complete all as specified and directed.

M&L for prepration of new plastered surface and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone msonary wall including racking of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for applying two coats of cement base paint after preparation of newly plastered/concrete surfaces over alkali resistant primer on wall including preparation of surfaces complete all as specified and directed.

M&L for reinforced precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary form work, set in CM 1:4 incl demolition of reinforeced cement concrete of any description and in any position complete all as specified and directed (Note : Reinforcement shall be measured and paid for separately)

S&F mild steel framed work as in manhole cover frames conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed

M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls incl demolition of reinforced cement concrete of any description and in any position complete all as specified and directed

M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L Baroda green marble 14 -16 mm thick (table rubbed and polished ) in step, jambs, pillers , window cills, cooking plateforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for machine cut Kota stone slab 18-20 mm thick as in floor/ treads of steps laid over and including 15mm thick screed in CM 1:6, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete incl demolition of cement concrete 40 mm thick as in floor complete all as specified and directed.

M&L for machine cut Kota stone slab 10-12 mm thick as in risers to steps, skiting/dado, pillars, window cills and the like, laid over and including 10mm thick rendering in cement mortar 1:4, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing incl taking down cement plaster on brick or concrete surfaces complete all as specified and directed

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 250 litres but not exc 500 litres including taking down and re-fixing stop valves of any size complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth without using extra cement incl demolition of cement concrete 75mm thick of any description complete all as specified and directed

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 300mm x 300mm x 20mm thick jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 15mm thick screed bed in CM 1:6 and 75mm thick PCC 1:4:8 type D2 incl demolition of PCC of any description complete all as specified and directed Make : Ferrocon/Nitco/Hindustan tiles

S&F for 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 15mm dia bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting in wall/floor complete all as specified and directed. Make : Jindal/Tata/Prakash

S&F for 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 20mm dia bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting in wall/floor complete all as specified and directed. Make : Jindal/Tata/Prakash

S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified and directed. Make : ZIM/Coronet/Essco

S&F in repair 15mm dia brass chromium plated pillar tap fancy type with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and directed. Make : ZIM/Coronet/Essco

S&F in repair 15mm Stop valve angle cock fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed. Make : ZIM/Coronet/Essco

S&F in repair chromium plated brass shower rose 125mm size with swivel joint and shower arm complete all as specified and directed. Make : Prayag/Pearl/Shakti

S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified and directed. Make : Cera/Hindware/Parryware

S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed. Make : Cera/Hindware/Parryware

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed. Make : Cera/Hindware/Parryware

S&F in repair triple layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed Make : Polycon/Rotomac/Sintex

S&F in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Make : Pearl/Prayag/Shakti

S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified and directed. Make : Blue Star/Prayag/Pearl

S&F in repair 20 mm bore dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed Make : ISI mark

S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed. Make : Prayag/Shakti/Pearl

S&F in repair PVC waste pipe 32/40 mm dia complete all as specified and directed Make : Prayag/Shakti/Polytuf

S&F in repair 140mm PTMT grating round hole/without hole (minimum weight 50 gms) over Rain Water Pipe/nahani trap with cement slurry complete all as specified and directed. Make : Prayag/Pearl/Shakti

S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed Make : Kisan/Prince/Supreme

S&F in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed Make : Kisan/Prince/Supreme

S&F in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed Make : Kisan/Prince/Supreme

S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed Make : Kisan/Prince/Supreme

S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe in run lead with dia of outlet 75mm complete all as specified and directed. Make : Kisan/Prince/Supreme

Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed

Taking down Chowkats exc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed

Taking down shutter of any description n. exc 1 Sqm each complete all as specified and directed

Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed

S&F for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, holdfast, slightly rounded or chamfered angles and throating complete all as specified and as directed

S&F framed work as in doors or gates, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging, fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and directed. Make : Green/Century ply

S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces on steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed.

S&F 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed.

S&F 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and directed.

S&F 75mm size mild steel butt hinges medium weight, cold rolled complete all as specified and directed.

S&F 125mm size mild steel pressed handles, oval type, stove enameled black complete all as specified and directed.

S&F 100mm size mild steel pressed handles, oval type, stove enameled black complete all as specified and directed.

S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F mild steel 160mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing complete all as specified and directed.

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F extruded aluminium alloy handle of size 150mm, fabricated type, anodised complete all as specified and directed.

S&F stainless steel butt hinges 100mm size complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified and directed

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with cut and mitred beads in squares or triangular n. exc 0.5 Sqm in each pane complete all as specified and directed

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specifed and directed

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed

S&F in repair of 20mm dia MS drapery rod, fancy type, powder coated wood finish, knobs and brackets, fixed in any length complete all as specified and directed

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole incl demoltion of cement concrete as in drain etc complete all as specified and directed

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed

S&F in repair 18/19mm prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screwsas in cupboard shutters and shelves complete all as specified and directed.

S&F 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30mm complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof padding finish surface even and smooth without using extra cement including mixed with water proofing compound @ 3% by wt of cement incl demolition of PCC in any description complete all as specified and directed (Note : Water proofing compound will be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

Repair to steel window by replacing worn out hinges or worn out portion such as glazing bars, fittings and fixture positioning of shutter etc and cleaning the window surrounding and renewal of fittings and fixture (u/s) including greasing welding, priming and painting complete all as specified and directed

S&F in repair 4mm thick plain glass of aluminium window by taking down window shutter by any means and replacing rubber packing, jointing clip etc complete all as specified and directed Make : Atul/Modiguard/Reliance

S&F for 40mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to connection PVC water tank incl taking up or down 40mm dia bore of galvanised iron steel tubing and connections complete all as specified and directed. Make : Jindal/Tata/Prakash

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. 2. Unless otherwise specified the rates for PCC/ RCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

RADHA ENTERPRISES

Saurav Enterprises

nautiyalandcompany

High Tech Metal India

M/s RK ENTERPRISES

Nijamudin & Sons

P K ASSOCIATES

shreyansh construction

M/S Manmohan Singh Anand

AMARJEET SINGH AND CO.