Construction of Control Room Building Panel Room on First Floor, Foundations, Cable Trench, Compound Wall Retaining Wall, RCC Road, Box Culvert and Misc. civil works at 66 kV Mahuva II SS, Ta Mahuva and Dist Bhavnagar under Amreli Circle

1 Excavation for foundation up to 1.50 m Depth including dewatering, sorting out and CMT 2339.00 ₹ 159.00 ₹

stacking of useful materials and spreading excavated stuff whereve required as directed

by EIC and disposing of the surplus excavated stuff up to any lead -Dense or Hard soil

(Executed with Mechanised efforts/Machinaries)

2 Excavation for foundation above 1.50 m Depth including dewatering, sorting out and CMT 105.00 ₹ 173.00 ₹

stacking of useful materials and spreading excavated stuff whereve required as directed

by EIC and disposing of the surplus excavated stuff up to any lead - Dense or Hard

soil(Executed with Mechanised efforts/Machinaries)

3 Providing and Filling in plinth including breaking clods, dressing with all lead and lift CMT 102.00 ₹ 530.00 ₹

(including watering, rolling, and consolidation with walk behind vibratory rollers or tamping

rammer compactor in layers of 200mm thick at O.M.C to required dry density). Including all

Labour charges & Govt royalty charges, etc., if applicable. Approved quality of

Murrum/Paraju to be brought from outside. The source area is considered with a lead up

to 20 km from the Site.

4 Earthwork for embankment including breaking clods, dressing with all lead and lift CMT 9448.00 ₹ 391.00 ₹

(including watering, rolling, and consolidation with 8 to 10 T rollers in layers of 200mm

thick at O.M.C to required dry density). Including all Labour charges & Govt royalty

charges, etc., if applicable. Approved quality of Murrum/Paraju to be brought from

outside. The source area is considered with a lead up to 20 km from the Site.

Note: 25 % of the successive bill amount shall be retained till the lapse of one full-

scale monsoon and rectifications of subsidence, if any, to the design ground level.

5 Filling in the plinth with sand/quarry dust under floors, including watering, ramming, CMT 380.00 ₹ 484.00 ₹

consolidating, and dressing, etc., complete.

6 Providing dry stone pitching using 150 to 230 mm size rubble stone including SMT 550.00 ₹ 756.00 ₹

levelling and dressing the sub grade/base to required slope, filling the voids by selected

soil watering, consolidating by hand rammer, filling up to the joints with C.M. (1:6) &

cement pointing by C.M. (1:2) including curing etc., completed as directed by E.I.C

[B] CONSTRUCTION

(1) MASONARY WORK

7 Providing and laying White stone Bella masonry (incl. quoin blocks, jamb blocks, closer, CMT 142.00 ₹ 6,258.00 ₹

etc;) approved size in the foundation and up to plinth in C.M. (1:5) including racking out

joints up to 12mm depth, scaffolding, curing, filling up the gaps between the joints

complete as directed by E.G.. Up to PLINTH.

8 Providing & laying White stone Bella masonry (incl.quoin blocks, jamb blocks, closer, CMT 189.00 ₹ 6,544.00 ₹

etc;) approved size in C.M. (1:5) including racking out joints up to 12mm depth,

scaffolding, curing, filling up the gaps between the joints complete as directed by E.G.. for

Super Structure G.F+F.F+Stair Cabin

9 Providing and laying brickwork using conventional common burnt clay building bricks CMT 31.00 ₹ 4,554.00 ₹

having a crushing strength not less than 35 kg/sq.Cm in Superstructure above plinth

level in cement mortar 1:5 (1 Cement:5 Sand)

10 Half Brick masonry in common burnt clay building bricks having a crushing strength not SMT 80.00 ₹ 634.00 ₹

less than 35 kg/sq. m in cement mortar 1:4(1 cement & 4 coarse sand) up to plinth & two

floors G.F+F.F+Stair Cabin. - Conventional Bricks

(2) CONCRETE WORK

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

11 Providing and laying cement concrete 1:4:8(1 Cement: 4 Coarse and: 8 black crushed CMT 659.00 ₹ 2,754.00 ₹

stone aggregate 40mm nominal size ) and curing completely- Foundation and plinth.

12 Providing and laying ordinary cement concrete M-15 for RCC structure, including finishing CMT 26.00 ₹ 4,009.00 ₹

smooth with curing, etc., complete. excluding the cost of formwork & the cost of

13 Providing & laying control cement concrete M-20 as per mix design, exposed work with CMT 714.00 ₹ 4,097.00 ₹

curing, etc., complete excluding the cost of ply wood form work & adjustable tubular

steel supports / Props and also excluding the cost of reinforcement.G.F+FF & Staircase -

For Footing base of col., foundation & mass concrete.

14 Providing & laying control cement concrete M-20 as per mix design, exposed work with CMT 377.00 ₹ 10,103.00 ₹

curing, etc., complete, including the cost of ply wood form work & adjustable tubular

steel supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircase -For

15 Providing & laying control cement concrete M-20 as per mix design, exposed work with CMT 11.00 ₹ 7,911.00 ₹

curing, etc. Complete, including the cost of plywood form work & adjustable tubular

steel supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircase -For

16 Providing & laying control cement concrete M-20 as per mix design exposed work with CMT 91.00 ₹ 6,756.00 ₹

curing, etc., complete including the cost of ply wood form work & adjustable tubular

steel supports / Props. but excluding the cost of reinforcement.G.F+FF &

StaircasseLintel, Chajja, Slab, Coping, and other cantilever portion

17 Providing & laying control cement concrete M-20 as per mix design exposed work with CMT 516.00 ₹ 6,292.00 ₹

curing etc. complete including the cost of ply wood form work & adjustable tubular

steel supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircase

Vertical Wall, Retaining Wall.

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

18 Providing and Laying Controlled cement concrete M20 for trimix RCC road to require CMT 102.00 ₹ 6,794.00 ₹

line, level, slope excluding the cost of Reinforcement & including of using a 125-micron

polythene sheet at the base of concrete, Mixing approved quality polyester fiber (12mm)

@125 gm per bag or as per manufacturer's specification during concreting including

preparing the sub base with formwork of M.S. C Channel sections of required length &

height as per drawing including connection, bracing pins, or stake to maintain line, level &

slope, etc. with using a needle Vibrator, surface vibrator & Double beam screed vibrator

for concrete compaction and finishing the surface with Power Trowel Cum Floater

including any low or high spots shall be made up by adding or removing concrete and

refinished to required line, level and slope, light brooming on the surface with providing

construction joint using a Concrete Groove Cutter machine of size 10 mm wide & 25 mm

deep in transverse direction @ 4.5 M C/C and sealing with approved quality grade B

bitumen sealant and providing Contraction (Dummy) joint using a Concrete Groove Cutter

machine of size 5 mm wide & 25 mm deep in Longitudinal direction and sealing with

approved quality grade B bitumen sealant and also providing expansion joints of size

mm width and up to through depth of concrete using 25 mm thick Dura Board HD-100 of

approved quality with 32mm dia dowel bar covered by 63 MM Dia P.V.C pipe cap filled

with compressible material and sealing 25x20 MM top with approved quality bitumen

sealant at 40 Meter C/C and longitudinally for a 6m wide road.The Item rate includes all

necessary equipment, machinery, tools, tackles, laborers & Pond / Jute bag Curing, etc.

complete as per the Drawing and as directed by E.I.C. (Minimum cement content for

Concrete is 370 Kg/Cmt & Excluding the cost of reinforcement and Dowel bar.)

19 Providing & laying control cement concrete M-25 as per mix design exposed work with CMT 126.00 ₹ 4,368.00 ₹

curing, etc., complete, excluding the cost of ply wood form work & adjustable tubular

steel supports / Props. and excluding the cost of reinforcement.G.F+FF & Staircase -For

Footing base of col., foundation & mass concrete.

20 Providing & laying control cement concrete M-25 as per mix design exposed work with CMT 48.00 ₹ 10,164.00 ₹

curing, etc., complete, including the cost of ply wood form work & adjustable tubular

steel supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircase -For

21 Providing & laying control cement concrete M-25 as per mix design exposed work with CMT 61.00 ₹ 7,972.00 ₹

curing, etc., complete, including the cost of ply wood form work & adjustable tubular

steel supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircase -For

22 Providing & laying control cement concrete M-25 as per mix design, exposed work with CMT 88.00 ₹ 6,906.00 ₹

curing, etc. Complete, including the cost of plywood form work & adjustable tubular

steel supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircase -For

Sill, Lintel, Coping, chajja, slab, Staircase & Cantilever

23 Providing & laying control cement concrete M-25 as per mix design exposed work with CMT 4.00 ₹ 7,971.00 ₹

curing etc. complete including the cost of ply wood form work & adjustable tubular

steel supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircase

Paradi, Retaining Wall Pardi

24 Supplying and using of reliance or equivalent brand-approved quality polyester Recron 3 NO 2211.00 ₹ 53.00 ₹

S (12 mm) fiber in the concrete of any grade/ cement mortar work at a rate of 125 gm per

cement bag or as per manufacturer's specification and as directed by E.I.C.

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

25 Supplying and using floor hardener (dry powder form) of Fosroc,Ultratech, Sika, Kg 2540.00 ₹ 12.00 ₹

equivalent brand for use in RCC Trimix Road at a rate of 3.5 kg/sqmtr or as per

manufacturer's specification, etc., complete as directed by EIC.

26 Providing formwork of plywood shuttering to give a smooth exposed finish, including SMT 1074.00 ₹ 186.00 ₹

centering (adjustable tubular steel supports). Shuttering, strutting, and propping, etc., for

any height of propping and centering below supporting floor to ceiling, and removal of the

same for reinforced concrete and plain concrete. For Footings, foundations, and

27 Providing & Fixing in position as per approved drawing Thermo michanically MT 207.50 ₹ 76,520.00 ₹

treated FE 500/500D reinforcemnet bars confirmong to IS 1786 in RCC work including

Cutting,bending, binding with 16 gauge annealed wire, of bars as per IS requirenment If

necessary and placing in position etc. completed for RCC work. etc completed as directed

28 Providing fusion bounded epoxy coating not less than 175 micron thickness and up to MT 207.50 ₹ 8,643.00 ₹

300 micron to reinforcement bars as per IS - 13620-1993 / ASTM - 775 M including testing

of coating at plant.

29 Providing & laying 50 to 75 mm thick Grouting with Non-Shrink GP2 Grouting material of SMT 122.00 ₹ 2,036.00 ₹

Fosroc Conbextra GP2, Ultratech power Grout NS2, POLYGROUT-NS or equivalent

having the minimum compressive strength of 45 N/Sqmm mixing as per manufacturer's

specification, including necessary shuttering, tool tackles, labor, etc, completed as

directed by EIC.

30 Providing & laying 40 mm thick cement concrete flooring ( IPS) 1:2:4 ( 1-cement: 2- SMT 478.00 ₹ 295.00 ₹

coarse sand: graded stone aggregate 20 mm nominal size ) laid in one layer, including

finishing the floor with smooth cement slurry, marking diagonal lines, curing, etc., complete

as directed by E.I.C.

(3) PLASTER WORK

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

31 Providing and applying 15 mm thick chemical plaster to the ceiling/Slab using Self SMT 771.80 ₹ 287.00 ₹

curing special ready plast (Ready mix plaster) of Ultratech, Fosroc, Megicrete, JSW

cement,Walplast brand as per following steps:

Step: 1 Cleaning: Clean the surface from dirt, oil and foreign material with brush or water

jet. Clean efflorescence of the salts by scrubbing. Concrete surface shall be hacked.

Step: 2 Glass Fibre / wire mesh : All concrete & Block joints must be covered with a

glass fibre / wire mesh. (Which will be paid separately)

Step 3: Pre wetting: Dampen the Surface.

Step 4 : Mix preparation: In 6-7 litter of potable water add 40kg ready mix mortar. and

leave fto slake for 10 min. Then Machine mixing shall be done for 5-10 min.

Step 5 : Dash Coat : A Dash coat mixture should be thrown on wall.

Step 6 : 1st Coat: A dot means patch of plaster of size 15 cm X 15 cm and having

thickness of about 10 mm or proposed thickness of base coat shall be laid at every 2m X

2m grid. Apply 1st coat of 8-10mm thick. The surface shall be left rough and furrowed

mm deep with a scratching tool diagonally both ways, to form key for the subsequent coat.

Step 7 : 2nd coat : Each coat shall be kept damp till subsequent coat is applied. It shall be

carried out preferably within 48hours of the previous coat. Second coat of 6-8mm thick

shall be applied.

complete as directed by the in-charge engineer.

32 Providing 15mm thick sand face plaster on masonry / bela / concrete wall using special SMT 2608.00 ₹ 327.00 ₹

ready mix plaster Ultratech, Fosroc, Megicrete, JSW cement,Walplast brand as per

following steps:

Step: 1 Cleaning: Clean the surface from dirt, oil and foreign material with brush or water

jet. Clean efflorescence of the salts by scrubbing. Concrete surface shall be hacked.

Step: 2 Glass Fibre / wire mesh : All concrete & Block joints must be covered with a

glass fibre / wire mesh. (Which will be paid separately)

Step 3: Pre wetting: Dampen the Surface.

Step 4 : Mix preparation: In 6-7 litter of potable water add 40kg ready mix mortar. and

leave fto slake for 10 min. Then Machine mixing shall be done for 5-10 min.

Step 5 : Dash Coat : A Dash coat mixture should be thrown on wall.

Step 6 : 1st Coat: A dot means patch of plaster of size 15 cm X 15 cm and having

thickness of about 10 mm or proposed thickness of base coat shall be laid at every 2m X

2m grid. Apply 1st coat of 8-10mm thick. The surface shall be left rough and furrowed

mm deep with a scratching tool diagonally both ways, to form key for the subsequent coat.

Step 7 : 2nd coat : Each coat shall be kept damp till subsequent coat is applied. It shall

be carried out preferably within 48hours of the previous coat. Second coat of 6-8mm thick

shall be applied.

Step: 8 : Curing: Curing for minimum 7days shall be carried out with minimum 3 times a

complete as directed by the in-charge engineer.

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

33 Providing and applying 20 mm thick ready-mix plaster with two or more coat to the SMT 1109.00 ₹ 506.00 ₹

masonry wall/bela/concrete wall/ceiling up to any height using special ready mix mortar

of Ascolite, Weberpremix SP 7, Ultratech, Fosroc, Megicrete, JSW cement brandas per

following steps:

Step: 1 Cleaning: Clean the surface from dirt, oil and foreign material with brush or water

jet. Clean efflorescence of the salts by scrubbing. Concrete surface shall be hacked.

Step: 2 Glass Fibre / wire mesh : All concrete & Block joints must be covered with a

glass fibre / wire mesh. (which will be paid separately.

Step 3: Pre wetting: Dampen the Surface.

Step 4 : Mix preparation: In 6-7 litter of potable water add 40kg ready mix mortar. and

leave fto slake for 10 min. Then Machine mixing shall be done for 5-10 min.

Step 5 : Dash Coat : A Dash coat mixture should be thrown on wall.

Step 6 : 1st Coat: A dot means patch of plaster of size 15 cm X 15 cm and having

thickness of about 15 mm or proposed thickness of base coat shall be laid at every 2m X

2m grid. Apply 1st coat of 10-15 mm thick. The surface shall be left rough and furrowed

mm deep with a scratching tool diagonally both ways, to form key for the subsequent coat.

Step 7 : 2nd coat : Each coat shall be kept damp till subsequent coat is applied. It shall be

carried out preferably within 48hours of the previous coat. Second coat of 8-10mm thick

shall be applied.

Step: 8 : Curing: Curing for minimum 7days shall be carried out with minimum 3 times a

complete as directed by the in-charge engineer.

34 Providing & fixing 18 gauge wire mesh jali having a width of 200 to 300 mm with nails SMT 510.00 ₹ 184.00 ₹

before finishing the surface with plaster. The item includes providing necessary

scaffolding also)

35 Providing cement vata (10cmx10cm size) quarter round in cement mortar 1:1 including RMT 150.00 ₹ 24.00 ₹

neat cement finishing watering etc. complete.

36 Providing & Applying Two coats of Birla or Asian Acrylic Lappy (Putty) and two Coats SMT 1270.00 ₹ 40.00 ₹

of primer of approved brand and manufacture on the new wall/ceiling surface to give an

even shade, including thoroughly brushing the surface free from mortar dropping and other

foreign matter, and sandpapering smooth. (Note: Before making final payment to agency

warranty certificate from the original manufacture for specific project on the name of

agency must be collected.)

37 Providing and applying Wall painting (three coats) with plastic emulsion paint of SMT 1219.00 ₹ 127.00 ₹

approved brand and manufacture on undecorated wall surface to give an even shade

including thoroughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth. Minimum 03 year warranty certificate to be taken from

paint brand. (Note: Before making final payment to agency warranty certificate from the

original manufacture for specific project on the name of agency must be collected.)

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

38 Providing & applying 1 coat of Dr. Fixit, Asian Paints, Berger brand Damp Proof material SMT 3041.00 ₹ 76.00 ₹

on existing plastered surface or approved make & shade, including finishing & thinning as

per manufacturer’s instruction. The work should be carried out strictly as per the

manufacturer's specification and requirement comp. as directed by EIC. (Note: Before

making final payment to agency warranty certificate from the original manufacture for

specific project on the name of agency must be collected.)

39 Providing & applying 2 coats of APOCOLITE APEX or its equiv. ACRYLIC SMT 3041.00 ₹ 121.00 ₹

WEATHERPROOF EXTERIOR EMULSION paint on existing plastered surface or

approved make & shade including finishing & thinning as per manufacturer’s instruction. A

gap of 6 hrs. Should be given between 2 subsequent coats. The work should be carried

out strictly as per manufacturer's specification and requirement comp. as directed by EIC.

Minimum 05 year warranty certificate to be taken from paint brand. (Note: Before making

final payment to agency warranty certificate from the original manufacture for specific

project on the name of agency must be collected.)

40 Providing & applying 3 coats of ACID/ALKALI resisting paint of approved shade & make SMT 36.00 ₹ 127.00 ₹

to the wall, ceiling, including filling putty, smoothing the surfaces, scaffolding, etc.,

complete as directed by E.I.C.

41 Providing whitewashing with lime on wall/ceiling surfaces (three coats) to give an even SMT 102.00 ₹ 19.00 ₹

shade, including thoroughly brooming the surface to remove all dirt, dust, mortar drops,

and other foreign matter.

42 Proviging & Applying EPOXY two component coating system based on synthesized epoxy resin SMT 2696.00 ₹ 335.00 ₹

and amine adduct manufacture as per technical specification of central electro chemical research

(CERCI/CSIRKARAIKUDI) to achieve 400-450 microns DFT in two coats as directed. The coating

system comprising EXOPY POLYMIDE ZP PRIMER and POLYMIDE COATING shall be used in

appropripate ratio as per manufacture and shall comply the CERCI technology of "

comprehensive repair & protection of concrete structures

43 Proviging & Applying tar extended two component coating system based on SMT 6298.00 ₹ 392.00 ₹

synthesized epoxy resin and amine adduct manufacture as per technical specification of

central electro chemical research (CERCI/CSIRKARAIKUDI) to achieve 400-450 microns

DFT in two coats as directed. The item includes cleaning the surface before treatment as

per manufacturer specification. The coating system EPCO2020TX or equivalent shall

comply the CERCI technology of " comprehensive repair & protection of concrete/steel

surface in wet & underwater codition". The rate shall be incusive of all materials labour

equivalent scaffolding etc.

44 Providing and laying 24"x24" Vitrified 8 to 10 mm thick tiles JOHNSON / KAJARIA / SMT 31.00 ₹ 1,282.00 ₹

NITTCO / VARMORA / SIMPOLO or approved by GETCO or GSECL (600mm x 600mm)

flooring over 20mm (Average) base of Cement Mortar 1:6 (1-Cement : 6 Coarse Sand) on

new surface or fixing on existing flooring by adhesive materials and also for skirting and

dedo on 10mm thick cement plaster in 1:3 including dismentalling of existing flooring and

jointed with colour cement slurry including finished with flush pointing & cleaning the

surface etc complete for light shade

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

45 Providing and laying color glazed tiles- JOHNSON / KAJARIA / NITTCO / VARMORA / SMT 174.00 ₹ 1,509.00 ₹

SIMPOLO or or approved by GETCO or GSECL 8 to 10 mm thick in flooring & Dedo laid

on bed of 12mm thick cement mortar 1:3 (1 cement : 3 course sand) & fixing the same in

cement & providing 12 mm thick back coating of cement plaster in CM 1:3 for base, filling

the joints with white/color cement neatly finishing the joints curing etc. complete.

46 Providing and laying approved quality polished Kotah stone slab (25mm th. 600mm x SMT 250.00 ₹ 1,168.00 ₹

600mm in size) flooring including using 35x25mm approved quality machine cut, marble

strip over 20mm (average) thick base of cement mortar 1:6 (1 cement: 6 course sand or

L.M. 1:1.5 laid over and jointed with grey cement slurry including rubbing and mirror

polishing using a polishing machine with grinding six emery's of different no. including

using special chemical powder for polishing, including white cement coating two times

during polishing to fill up minute holes or cracks in joints, etc.. The item rate includes

removing the existing flooring, including base concrete, and throwing the stuff as & where

directed up to any lead. Etc. complete as directed by E.I.C. The waste material will be the

property of the contractor.

47 Providing and laying polished Kota stone slab 25 mm thick in risers of steps, Dedo and SMT 34.00 ₹ 1,124.00 ₹

sills laid on 10 mm thick CM 1:3 & jointed with grey cement slurry, including rubbing and

polishing, etc., complete.

48 Providing and laying gang saw cut 18mm thick Galaxy black granite stone, mirror SMT 58.00 ₹ 3,875.00 ₹

polished pre moulded and pre polished machine cut granite stone of required size and

shape, shade and colour in sill soffit, jams, tred riser, flooring, platform etc over 20mm

base of cement mortar 1:6 (1-cement:6 coarse sand) laid or fixing with areldite, or fixing in

wall with cutting and jointed with grey cement slurry mixed with pigment, epoxy touchups

to match the shade of slab including rubbing polishing etc complete-18mm thick for sills,

(6) DOORS AND WINDOWS

49 Providing and fixing fully glazed / partly glazed double leaf 20 micron thick colour SMT 17.00 ₹ 4,042.00 ₹

anodized aluminium door with following listed extruded section manufactured by Jindal

luminium Ltd. & other accessories,the Alluminium sections are of HE9WP Group: 1) with

door outer frame section of 63.5 x 38.1 x 3.18 mm thick weighing 1.777 kg/Rmt (J4605) 2)

Door shutter vertical style (meeting style) of 53.7 x 44.45 x 2.30mm thickness (J4537)

weighing 1.238 Kg/m 3) Hinge side 53.7 x 44.45 x 2.30mm thickness (J4540) weighing

1.173 Kg/Rmt 4) Bottom rail of size 150 x 44.45 x 2.40mmthickness (J4538) weighing

2.376 Kg/Rmt 5) Lock rail of size 150 x 44.45 x 2.40mm thickness (J4538) weighing

Kg/Rmt 6) Top rail of size 47.62 x 44.45 x 3.18mm thickness(J4506) weighing

Kg/Rmt 7) Ventilator middle member (if required) 49.91 x 44.45 x 3.00mm thickness

(J4621) weighing 1.495 Kg/ Rmt 8) Aluminium handle 127.00 x 37 x 3.65mm thickness

(J4483) weighing 1.912 Kg/No. 9) Tower bolt 250mm long (J4954) 10) Aluminium bending

mortice lock (J4420) 11) Top panel using 6.0mm thick Triveni or Modi or Saint Gobain

make float glass fixed with PVC Clear gasket 12) Bottom panel using 12mm thick exterior

grade prelaminated particle board of make approved by the Engineer - in - Charge (for

partly glazed door) fixed with virgin PVC clear gasket 13) Floor Spring type Door Closer of

make approved by the Engineer–in–Charge, with all other required fixtures and fastening

of colour anodised with aluminium beading, with all labour and materials, etc., complete as

directed by EIC. Aluminium section user for fixing hinges, door closer, etc., shall be filled

with country teak wood to receive screws.

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

50 Providing and fixing window having extruded 20 micron thick colour anodized frame SMT 32.00 ₹ 2,884.00 ₹

main outer size 63.50x38.10x1.95mm (of Jindal Section no:4605, @ wt 1.094Kg/Rmt),

horizontal two track member size 61.85mm x 31.75mm x 1.20mm(of Jindal Section mo:

8687 @ wt of 0.695 Kg/mt), vertical member of size 61.85mm x 31.75mm x1.30mm(of

Jindal section no: 8758 @ wt of 0.695 Kg /mt) with Sliding Shutters of horizontal member

Size 40mm x 18mm x 1.29mm(of Jindal section no: 8949 @ wt of 0.456Kf/mt), vertical

member of size 40mm x 18mm x 1.29mm (of Jindal Section: 8947 @ wt 0.457 Kg/mt,

section 8948 @ 0.457kG/mt) with 5 mm thick transparent bronze colour/white tinted float

glass with aluminium fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for Window.

51 Providing and fixing an approved quality 20-micron thick color anodized ventilator SMT 4.00 ₹ 1,164.00 ₹

having a frame size 63x38.10 mm, having a thickness of 1.20mm & weighing

kg/rmt, approx standard aluminum extruded anodized frame having a panel of 5mm thick

white/brown glass fixed horizontal louvers in the aluminum channel as per details

52 uPVC Casement Door: Providing and fixing factory made uPVC Casement white colour SMT 11.00 ₹ 9,649.00 ₹

door Double Panel of VEKA or its equivalent make comprising of lead free uPVC multi

chambered frame, sash and mullion / coupler (wherever required) extruded profile having

minimum wall thickness of 2.10mm for R3 and R4 profiles confirming to EN:12608 in any

shape and size as per CPWD specification, uPVC extruded glazing beds, interlocks and

inline sash adaptor (wherever required) of appropriate dimension, EPDM gasket,

hardware, SS304 grade fasteners of minimum 8mm dia with counter sunkhead,

comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per

IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary necessary stainless

steel screws etc. Profile of frame, sash and mullion shall be mitred cut and fusion welded /

mechanically jointed duly sealed at cornders, including drilling of holes for fixing hardware

and drainage of water etc. After fixing the frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon sealant over backer rod of approved

size and quality all complete confirming to CPWD specification and direction of Engineer in

charge. Section of steel reinforcement and cross section of uPVC profile to be approved

by Executive Engineer.

Double panel casement door with French (False) Mullion with Zink alloy (zamak) 3D

Hinges, multipoint locking system, Zink alloy (Zamak) powder coated handles on both

sides. Using R4 series with frame (64mm and above) X (55mm and above) & Sash (64mm

and above) X (100mm and above) & French (False) Mullion (64mm and above) x (60mm

and above) and Float glass pane of nominal thickness 5mm (weight not less than

Note: Structural design proof checked from Government Engineering Institute, to be

provided by manufacturer considering site with basic wind speed > 45 m/sec as per IS

(7) FABRICATION ITEMS

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

53 Providing and fixing approved quality Rolling shutters of approved make and made with SMT 23.00 ₹ 5,334.00 ₹

gear operated type with crane handle as per IS 6248 -1979 having 18 gauge sheet

thickness and 80mm wide M.S. Laths interlocked together through their entire length and

jointed together at the ends by end locks mounted on specially designed pipe shaft with

bracket plates guide channels and arrangements for inside locking with push-pull

operation complete including the cost of hood cover with one coat of red oxide primer

followed by 3 coats of an oil painting of approved shade & tint etc complete as directed by

E.I.C (The measurement shall be paid for wall opening plus drum only) (A) Shutter having

width below 3.5 meters.

54 Providing & fixing MS Grill /angle of approved quality & design & as per drawing & as KG 862.00 ₹ 115.00 ₹

directed with 3 coats of oil painting of approved shade & tint with one coat of red oxide

primer including grouted hold fast etc. complete as directed by EIC.

55 Steel Work, welded in built up section frame work including cutting, hoisting, fixing in KG 1187.00 ₹ 96.00 ₹

position with 3 coats of oil painting of approved shade & tint with one coat of red oxide

56 Providing and fabricating and erecting GI work Welded Angle posts, racks & trays for KG 12514.00 ₹ 110.00 ₹

cable trench using structural steel angels and flats, sheets, etc. of approved steel

manufacturer as per drawing & design including cutting, welding & fixing hold fast in wall

with C.C. & with hot deep galvanized as per IS-2633/72 and 209 of 1966 or latest

amendment etc. & make etc. completed as directed by EIC. (All materials required for the

work are to be brought by the contractor.)

57 Providing fabricating and erecting a GI chain link fencing panel of size 2400x2000mm KG 365.00 ₹ 111.00 ₹

made from 75x75mm & 10 gauge GI chain link & GI 50x50x6 mm angle, including fixing

and chain link in angle frame using 40x3 mm GI flat welded to angle frame. Drilling of

holes in angle frame and flat, fixing the same with angle post in line, level and plumb using

10 mm dia bolts and nuts in frame and flat with hot deep galvanizing as per IS-2633/72 &

209 of 1966 or latest amendment, etc complete as per drawing as directed by EIC. (All

these materials like MS flat, chain link fencing, GI angles, bolts, nuts will have to be

supplied by the contractor)

58 Supply, fabrication, cutting, threading of M.S rod, including hot dip galvanizing of full KG 1778.00 ₹ 142.00 ₹

length, and required size, including 2 Nos of hex nuts with check nut, lock nut, plain

washer, spring washer, base plate 65X10 thick stopper pit welded at end. etc, complete as

directed by E.I.C

59 Setting of TR Rail for transformer plinth in line, level, and gauge before concreting of SET 3.00 ₹ 1,010.00 ₹

foundation and making necessary holes in rail poles if required & fixing the foundation

bolts and fixing template in such a way as it remains in position during concrete as

directed by EIC.

60 Transportation of TR Rail poles, breaker foundation bolts of any dimension size from MT 2.00 ₹ 2,676.00 ₹

Amreli construction Division store to the erection work site, including loading, unloading,

carting, and all necessary labour works, etc., completed as directed by the Engineer in

61 Setting of template & foundation bolts in line and level before concreting of foundation NO 144.00 ₹ 246.00 ₹

and making arrangement of fixing template in such a way as it remains in position during

concrete, etc. comp. As directed by EIC. Note: The rate includes supplying and setting

62 Providing & fixing M.S. ladder 450mm wide or 50x6 mm M.S. flat and 16mm dia M.S. RMT 10.00 ₹ 899.00 ₹

Bars welded as step at 300mm C/C and fixing the ladder & 3 coats of oil painting, etc.,

SUCH-B. as directed by E.I.C. Page

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

63 Providing & Fixing SIGN BOARD having size 1000 X 750 mm. for SUB-STATION made NO 2.00 ₹ 6,169.00 ₹

from 16 gauge M.S. Sheet having frame work of 35X35X3 mm. M.S. angle all-round &

vertical intermediate angle supports at equal distance welded to sheet with 2 Nos. of

50X50X6 mm. M.S. angle posts 3.0 M. long with arrangement of bolting, 3 coats of oil

painting etc., complete as directed by E.I.C

64 Providing and fixing approved quality sliding gate of 40mm dia mild steel pipe B class all SMT 27.00 ₹ 2,239.00 ₹

round and 20mm dia Mild steel pipe at 200mm C/C and 12mm mild steel square bars at

200mm C/C alternatively (I.e. One between two pipes) vertically welded to 40mm dia pipe

frame as per drawing and design with necessary brackets, hold fasts, locking arrangement

on top & aldrop on both the side including base rail for sliding the gate having ball bearing,

rollers & guide tracks of 50x6mm M.S. flat with hold fast, fabrication of side supports

including fixing GETCO letter on front side etc. comp. with three coats of approved oil

painting & one coat of red oxide primer as directed by EIC (The cost does not include the

cost of reinforcement)

65 Supplying & Fixing 600 mm dia hot dip galvanising cross spiral type razor edge RMT 292.00 ₹ 303.00 ₹

concertina coil having 80 circles, 200 clips with optimum openable strentch of 8m length

using a central core wire high carbon spring steel (High tensile wire) made up of 2.6mm

dia as per IS:4454, Part-1, grade-1-II having minimum galvanising of 230-250 gsm per

mm2 around which a edge of razor sharp barbs strip of 5mm thick & 19mm width

confirming to IS:513DD quality having minimum galvanizing coating of 12 microns with

series of barbs punched along the length at regular interval support / tied with two rows of

barbered runner wires to newly proposed MS / GI angle brackets at top and one runner

wire at the bottom with U nails & clips etc complete as per manufacturers specification and

directed by EIC. (The item rate does not include the rate of MS / GI angles.)

66 Providing & fixing pre-cast Rubber Dye inter locking concrete block 60mm thick with SMT 152.00 ₹ 720.00 ₹

grade of concrete M300 pneumatic compressed Vibrated mechanically and as per

approved designed confirming to IS 15658:2006 including compacting soil base by hand

rammer before spreading 75mm sand layer for levelling and filling the Joints with sand in

proper line and level as per guidlines of IRC:SP 63-2018 etc.

67 Providing & placing 50mm thick & 300mm wide Prestressed Concrete Cover (for clear SMT 253.00 ₹ 599.00 ₹

span of up to 1.2 meter in proportion (1:1:5:3) or M-20 necessary reinforcement or 4mm

dia HT steel wire-4 Nos. bars and 4mm dia. distribution bars at 150 mm C/C as per

drawing & design, vibrating with vibrators. Finishing all the surfaces, curing by placing in a

water pond for ten days, etc. Complete as directed by E.I.C. ( The rate includes cost of all

material required, labour charges, transportation, loading, unloading, etc.

68 Providing and fixing 12 mm dia MS Fan hooks embedded in slab or beam during casting NO 25.00 ₹ 134.00 ₹

as per instruction, including 3 coats of oil paint, etc., complete as directed by EIC.

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

69 Providing & applying water proofing treatment by Smart Care damp proof ultra of Asian SMT 263.00 ₹ 376.00 ₹

paints or equivalent by (1) cleaning the terrace, parapet wall etc. complete by means

brush, water etc. & make it complete dust free (2) Applying crack seal on cracks of terrace

roof, parapet etc (3) providing first coat of self priming smart care damp proof ultra of

asian paints or equivalent using brush & by adding 33% thinner (water) & kept surface free

for 4-6 hours for making dry (4) applying first coat of water proofing smart care damp proof

ultra of asian paints or equivalent using roller without adding any thinner & kept surface

free for 4-6 hours for making it dry (5) joints of parapet & slab packing work by smart care

joint tap of asian paints or equivalet (6) applying second coat of water proofing smart care

damp proof ultra of asian paints or equivalent utilizing roller without adding any thinner &

kept surface free for 4-6 hours for making it dry. The contractor shall submit the

performance guarantee of manufacture. The contractor shall also submit a performance

guarantee of the waterproofing item at the rate of 20% of the cost of an item of work order

for a period of 5 years from the actual date of completion of work on stamp paper of

appropriate value in the approved format of GETCO. The agency has to give consent to

deduct 20% of the cost of an item of work order for a period of 5 years from the actual

date of completion from his bill and shall be withheld as a performance guarantee for five

years. (Note: Before making final payment to agency warranty certificate from the original

manufacture for specific project on the name of agency must be collected.)

70 Providing & applying anti-termite treatment, as per IS 6313 (Part II & II 2001) for building SMT 270.00 ₹ 133.00 ₹

works in pre-construction & post const stages, using chemicals conforming to relevant IS

in water emulsion and effective when applied uniformly over the area to be treated. The

chemical to be used is chlorophriphos 20% EC or its equivalent. The treatment is to be

carried out as per the procedure mentioned below, and the treated plinth surface area is to

be taken for measurement. (with performance guarantee for 5 years)a)For pre-

construction treatment: For plinth filling & periphery holes in side plinth to be drilled

300mm C/C each having depth 1.5M and for inside plinth the holes are to be treated with

diluted chemical solution, 1.5 lit. per hole, in the ratio of 1:20. For the periphery, i.e.

outside plinth, the ditch is to be treated with diluted solution 2.25 litres per rmt. In the ratio

1:20. The entire surface area is to be treated with a diluted solution of dose 2.5 litres per

smt. over and above as a plinth surface treatment. The contractor shall submit a

performance guarantee of the anti-termite item at the rate of 20% of the cost of the

executed quantity of item of work order for a period of 5 years from the actual date of

completion of work on stamp paper of appropriate value in the approved format of

GETCO. The agency has to submit the 20% of cost of executed quantity in the form of

DD/BG of Schedule Bank / Nationalised Bank in favour of GETCO (A/c Agency) for a

period of 5 years from actual date of completion from his bill and shall be withheld as a

performance gaurantee for five years..

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

71 Providing & fixing approved quality 300x300mm size marble year plate with black border NO 1.00 ₹ 303.00 ₹

all round & letters, including fixing the same in cement mortar etc.. comp. As directed by

72 Painting the letter with the best enamel oil paint in 200 to 250mm size, etc., complete as Per 200.00 ₹ 3.00 ₹

directed by EIC (paint should be brought by the contractor) Letter

73 Providing plantation & development of plants /trees/flowers, ornamental plants, & NO 50.00 ₹ 314.00 ₹

garden shrubs, small trees, of plants of selected & approved name quality, size, & growth

in good condition. The work includes the cost of plants, materials, and digging a pit in the

soil of size 0.6x0.6x0.6 mtr soil for planting trees. mixing manure & refilling pit with good

earth, watering as & where required. Providing pesticides/fertilizer for maintenance,

replacement & replacement of dead plants during

maintenance.cleaning,removing,labour,tools & tackles transportation,loading & un loading

etc.complete as directed by E.I.C.

74 Providing cages made from plastic/steel net for the protection of outdoor plants NO 50.00 ₹ 183.00 ₹

/trees/flowers, ornamental plants, & garden shrubs, and small trees. Frame made with

steel flat in round or square shape of minimum 375mm dia., vertical height minimum

1500mm, including transportation, fixing at location as directed by EIC,

75 Providing and fixing Sign Board made out of 2 mm Aluminium/ ACP sheet of size 120 x NO 2.00 ₹ 10,818.00 ₹

90 cms as per design given by EIC, pre-treated with phosphating process and acid

etching, coated with one coat of epoxy primer and two coats of best qualify epoxy paint,

reflectorised with retro reflective sheeting as per lates M.O.S.T specifications. Letters and

numerals should be as per IRC 30-1968, 3.1m long stand post and frame may be erected

from 50 x 50 x 5mm or 75 x 75 x 6 mm as required, and painted with the best quality

epoxy coatings. The details of symbols or inscription/numerals for the board shall be as

per the instructions of EIC. The fixing at the site shall be in 1:2:4 CC block of size 45 x

x 60 cm for each leg, including excavation, concreting curing, etc, complete under

supervision of EIC.

[C] WATER SUPPLY AND DRAINAGE & MISC.

76 Providing, laying, and jointing in true line and level 15 mm diameter UPVC pipe (SCH- RMT 22.00 ₹ 72.00 ₹

40) for cold water, including fittings made by PRINCE / SUPREME / ASTRAL / FINOLEX.

Pipe shall be fixed on the wall with the help of a GI clamp at every two meters c/c or shall

be concealed as directed, including necessary fittings, fastening, fixtures, excavation, and

backfilling. The rates include testing of pipe and jointing, and fixing the same with

adhesive solvent, including the cost of all materials.

77 Providing, laying, and jointing in true line and level 25 mm diameter UPVC pipe (SCH-40) RMT 96.00 ₹ 91.00 ₹

for cold water, including fittings made PRINCE / SUPREME / ASTRAL / FINOLEX. Pipe

shall be fixed on the wall with the help of a GI clamp at every two meters c/c or shall be

concealed as directed, including necessary fittings, fastening, fixtures, excavation, and

backfilling. The rates include testing of pipe and jointing, and fixing the same with

adhesive solvent, including the cost of all materials.

78 Providing, laying, and jointing in true line and level 40 mm diameter UPVC pipe (SCH-40) RMT 149.00 ₹ 147.00 ₹

for cold water, including fittings made PRINCE / SUPREME / ASTRAL / FINOLEX. Pipe

shall be fixed on the wall with the help of a GI clamp at every two meters c/c or shall be

concealed as directed, including necessary fittings, fastening, fixtures, excavation, and

The rates include testing of pipe and jointing, and fixing the same with Page

adhesive solvent, including the cost of all materials.

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

79 Providing & fixing PRINCE / SUPREME / ASTRAL / FINOLEX. rigid P.V.C. pipe for Rain RMT 279.00 ₹ 309.00 ₹

water 10 kg/cm2 including necessary fittings like bends, shoe, cowl etc. & fixing the pipes

to the wall in plumb by means of G.I. Clamps/brackets of 18 gauge sheet at 1 to 1.5 meter

distance, filling the joints with approved solution complete as directed by E.I.C. - 90 mm

80 Providing & laying rigid 6 kg/cm2 PVC drainage pipe 75mm dia. including necessary RMT 91.80 ₹ 147.00 ₹

fittings like bend, tee,Y bend plug etc. fixed with wall by means of clamps / brackets at 1 to

1.5 meter distance such that pipe should not touch the wall & nails with water tight joints

by approved solution etc. complete as directed by EIC.

81 Providing & laying rigid 10 kg/cm2 PVC drainage pipe 110mm dia. including necessary RMT 148.63 ₹ 458.00 ₹

fittings like bend, tee,Y bend plug etc. fixed with wall by means of clamps / brackets at 1 to

1.5 meter distance such that pipe should not touch the wall & nails with water tight joints

by approved solution etc. complete as directed by EIC.

82 Supplying and fixing reinforced concrete heavy-duty non-pressure pipes with collars for RMT 222.00 ₹ 367.00 ₹

culverts, including necessary excavation & refilling the trenches, joining the pipes with

C.M. (1:1) & filling 150mm thick concrete (1:4:8) below joints, curing, etc., completed as

directed by E.I.C I.S. Class NP2 of internal diameter 150 mm.

83 Supplying and fixing reinforced concrete heavy-duty non-pressure pipes with collars for RMT 170.00 ₹ 874.00 ₹

culverts, including necessary excavation & refilling the trenches, joining the pipes with

C.M. (1:1) & filling 150mm thick concrete (1:4:8) below joints, curing etc., completed as

directed by E.I.C I.S. Class NP3 of internal diameter 300 mm.

84 Providing and fixing approved quality PVC SWR Nahani trap IS 14735 for drain 75 mm NO 14.00 ₹ 582.00 ₹

diameter with jaliwith self cleaning design with CI scread down or hinged grating including

the cost of cutting with additional aluminum perforated jali cover & Pipe outside the wall

with plug, bend, and making good the walls etc. complete as directed by E.I.C.

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

85 Providing and fixing approved quality S.W. gully trap with C.I. Grating, brick masonry NO 4.00 ₹ 1,235.00 ₹

chamber, and water-tight C.I. cover with frame of 300 mm x 300 mm size (inside) with

standard weight. (B) 150 mm x 100mm size P or R type.

86 Providing & fixing approved quality Fiber Reinforced Polymer(FRP) (24 Inch x 24 Inch x NO 7.00 ₹ 2,543.00 ₹

1.2 inch) in Size Manhole Covers 2.5 Tons or More Capacity with water-tight Frame &

fixing the same in concrete or Mortar, etc., complete as directed by E.I.C.

87 Providing & fixing approved quality Fiber Reinforced Polymer(FRP) (18 Inch x 24 Inch x NO 12.00 ₹ 2,363.00 ₹

1.2 inch) in Size Manhole Covers 2.5 Tons or More Capacity with water-tight Frame &

fixing the same in concrete or Mortar, etc., complete as directed by E.I.C.

88 Providing & fixing approved quality Brass Ball Valve-40MM DIA as directed by E.I.C. NO 2.00 ₹ 1,809.00 ₹

89 Providing & fixing approved quality Brass Ball Valve-25MM DIA as directed by E.I.C. NO 8.00 ₹ 631.00 ₹

90 Providing and fixing approved quality screw down bib tapes of jaquar code no OPP- NO 14.00 ₹ 2,517.00 ₹

15037PM or its equivalent brand having basic price of tap ₹2050 or more following size:

(A) Brass screw down bib tap polished bright 15mm dia.

91 Providing & Fixing approved quality a set of 6 Nos. of stainless steel coat racks of NO 4.00 ₹ 46.00 ₹

approved quality fixed on 20 mm. thick teak wood batten including 3 coats of oil painting

etc., complete as directed by E.I.C

92 Providing and fixing Stainless Steel Towel rack of 600mm long with 03 hoocks including NO 6.00 ₹ 3,741.00 ₹

fitting & fixing in position with required accessories, , including transportation, tools

tackles, fitting work and fitxures for the same etc complete. Catagory : Jaquar ACN-

1181FHS or Kohler / Kerovit / reputed make having base price more than ₹3100.00

93 Providing and fixing Swivel Mirror 630mm x 445mm of superior glass including fitting & NO 6.00 ₹ 4,374.00 ₹

fixing in position with required accessories, , including transportation, tools tackles, fitting

work and fitxures for the same etc complete. Catagory : Jaquar AKP-35795 or Kohler

/Kerovit / reputed make having base price more than ₹3,650.00

94 Providing & Fixing Stainless Steel of approved brand Kitchen Sink glossy ASIS 304 NO 3.00 ₹ 3,275.00 ₹

grade of 1mm thick with overall size 610x460mm & bowl size 560x410x200mm

including cutting holes and making good the hole including pillar tap,chromium plated

bottle trap,waste coupling, fisher union, wall flange etc. complete as directed by EIC.

(3) BORE AND WATER SUPPLY

95 Providing BOREWELL PRE-FEASIBILITY REPORT (before conducting bore well work) No 1.00 ₹ 6,900.00 ₹

Feasibility report shall include the geology of the area, Hydrological condition of the area,

Water quality of the area, location of the borewell, depth of bore borewell and

recommendation if any.

96 Supply of approved quality washed graded gravel of size of 3mm to 6mm incl CMT 1.00 ₹ 2,029.00 ₹

packing the same in angular space between casing pipe and bore hole. Before packing

the gravel shall be screened and all undersized and oversized particals shall be removed.

The gravel shall be free from all impurities and foreign materials.

97 Drilling of Bore well of 165mm dia by machine in all kinds of soil, sand, clay, Murrum, RMT 150.00 ₹ 236.00 ₹

soft rock, and hard rock, etc., complete, truly vertical with equipment and labor, etc.,

complete as directed by E.I.C. (A) 0 to 150 meter

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

98 Providing fixing and lowering 125 mm dia Nominal size and 140mm OD having wall RMT 150.00 ₹ 597.00 ₹

thickness 6.5 to 7.3 mm PVC CM casing pipe of IS :12818 AROMA make or it`s

equivalent including necessary threading couplings connections etc. complete as directed

by EIC. For Casing / Strainer pipe

99 Providing & fixing approved quality top cap for 200mm dia. Pipe clamps, socket & other NO 1.00 ₹ 775.00 ₹

accessories required for completing the job as directed by EIC

100 Supplying and lowering Kirloskar/Falcon/Lubi/Crompton make ISI submersible pump for NO 1.00 ₹ 29,026.00 ₹

3HP/28 stage in bore well, etc. comp. as directed, including ISI approved MEI type oil

immersed auto transformer starter commissioning and testing to required delivery head.

(All other accessories will be paid separately.)

101 Providing & fixing Kirloskar/Falcon/Lubi/Crompton make ISI single phase monoblock/self- NO 1.00 ₹ 12,090.00 ₹

priming pump of ISI brand (2H.P) with all GI fitting for inlet & outlet connection, including

providing G.M.Wheel Non-Return valve, required electric fitting/switchboard etc. comp.

102 Providing, fixing PRINCE / SUPREME /Ashirvad or Equivalent approved quality of HDPE RMT 160.00 ₹ 134.00 ₹

pipe of ISI quality having Material grade PE-80, Pressure class PN10-(10kgf/cm2), SS-

316 nipple at both ends with all accessories fittings, jointing etc. suitable for submersible

pump lowering in bore etc., complete as directed by EIC. - 63mm dia.

103 Providing & joining Anchor/RR Cable/Polycab/Finolex/Havells/Avocab ISI make PVC RMT 170.00 ₹ 87.00 ₹

Insulated flat Submersible Copper cable Sufficient for a 3 HP Pump set, etc., complete

as directed by EIC. with size 3-Core 4 Sq. mm flat cable.

104 Providing & fixing approved quality readymade 4 Layered (Thermal isulated) overhead NO 2.00 ₹ 12,816.00 ₹

P.V.C. water tight storage tank of 1000 liters capacity of make Supreme / Vectus /

Ashirvad or its equivalent made from food grade plastic and water tank is certified with

RoHS (Restriction of Hazardous Substances) and linear low density polythene & low

density polythene LDPF product confirming to I.S.: 10146-1982 with cover including

providing & fixing one 20mm dia, float valve ball-cock, one 20mm dia PVC over flow pipe

of length up to 0.30 Mt. including making all connection for inlet/outlet etc. complete as

directed by E.I.C.

105 Providing and fixing wash basin with single hole pillar tap with tap with brackets painted NO 4.00 ₹ 11,231.00 ₹

while/colour including cutting holes and making good the hole including pillar

tap,chromium plated bottle trap,stop cock, fisher union, Brass waste pipe etc complete.

Half Pedestal Washbasin of Jaquar CNS-WHT-801 with fixing accessories BP ₹4200

Pillar Cock Jaquar FLR-5015 with lift type knob and Base flange base prise ₹1975.00

Waste Coupling 32mm size full threaded Jaquar make ALD-705L130 BP ₹625.00

Bottle Trap Jaquar make ALD-769L300x190 Wall connection pipe and Flange BP ₹1950

Braided hose 450mm long with one M10X1 Nipple and 15mm Nuts , O ring and Rubber

washer or products of Kohler /Kerovit / reputed make having base price more than above

mentioned Base price (BP) for each item.

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

106 Providing and fixing Rimless wall hung WC with inbuilt jet, PP soft close slim seat cover, NO 4.00 ₹ 18,216.00 ₹

hinges, accessories set WALL HUNG Water Closet of size 355mm X 555mm X 370mm

including jointing with soil waste pipe and with inlet connection for flush pipe with W.C.

pan and flush cock of approved quality of 25mm dia etc. complete.

Wall Hung WC of Jaquar make FLS-WHT-5953JPPSM of BP ₹12,190.00

Regular Body of Concealed Stop Cock Suitable for 15 mm Pipe Line with Protection Cap

Jaquar make ALD - 083 B.P. ₹1175

Exposed part kit of Jaquar make Opp-15083KPM concealed stop cock with fitting sleeve,

operating lever, adjustable wall flange with seal having BP ₹675.00

Regular Body of Concealed Stop Cock Suitable for 25 mm Pipe Line with Protection Cap

Jaquar make ALD - 081 B.P. ₹1850

Exposed part kit of Jaquar make Opp-15083KPM concealed stop cock with fitting sleeve,

operating lever, adjustable wall flange with seal having BP ₹675.00

or products of Kohler /Kerovit / reputed make having base price more than above

mentioned Base price (BP) including fitting & fixing in position with required accessories,

including transportation, tools tackles, fitting work and fixtures for the same etc complete.

107 Providing and fixing urinal with spreader hole and fixing accessories of size 355 X 340 X NO 2.00 ₹ 11,403.00 ₹

535mm of jaquar - URS-WHT-13261H of Base prise ₹4100 including connection with trap

and with integral longitudinal flush pipe concealed outlet

Urinal Valve with Auto Closing System with Built-in Control Cock & Wall Flange Jaquar -

PRS-077 having BP-2550

Urinal Spreader bowl Top Inlet 15mm with Fixing Stud Jaquar make ALD-1043 BP

Bottle Trap Jaquar make ALD-769L300x190 Wall connection pipe and Flange BP ₹1950

or products of Kohler /Kerovit / reputed make having base price more than above

mentioned Base price (BP) including fitting & fixing in position with required accessories,

including transportation, tools tackles, fitting work and fixtures for the same etc complete.

108 Providing B.B. Masonry inspection chamber for underground CI inspection chamber NO 9.00 ₹ 2,904.00 ₹

and bends with bricks heavy crushing strength not less than 35 kg/cm2 in CM (1:5), CI

cover with frame (light duty) 455mm x 610 mm internal dimensions, total weight of cover

with frame to be not less than 38 kgs (weight of cover 23 kg and weight of frame 15 kg).

RCC top slab with 1:2:4 mix (1 cement: 2Coarse sand: 4 graded stone aggregate 20 mm

size). Foundation concrete 1:5:10, inside plaster 15 mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and bed concrete, etc.,

complete. Inside dimensions are 455mm x 610 mm and 450 mm deep.

109 Providing and laying Granular sub-base in two layers by providing coarse graded material CMT 198.00 ₹ 952.00 ₹

Grading- I using B.T.M.C. (Black Trap Machine Crushed) metal 53 mm to 26.5 mm at

%, crushed stone aggregate 26.5 mm to 4.75 mm at 45% and below 2.36 mm at 20%,

having C.B.R. not less than 30%, as per table 402 of MORTH gradation including levelling

the material at site of work, mixing and spreading into grade and camber, watering and

consolidation at OMC with Vibratory roller of capacity 8 to 10 Tonne including cost of

material, labour etc complete-GSB

DESCRIPTION UNIT APROX. QTY. RATE AMOUNT

110 Providing, Laying, Spreading, and Compacting graded stone aggregates to wet mix CMT 198.00 ₹ 785.00 ₹

macadam as per MORT & H Specification including premixing the material with Water at

OMC in mechanical mix Plant, Carriage of mixed material by Tippers to site, Laying in

uniform layers with paver or motor graded in subbase/ sub base course on well prepared

surface and compacting with Vibratory Roller of 8 to 10 Tonne capacity to achieve the

desired density Complete as per MORT & H Clause-406-WMM

[E] OIL TANK PIPE LINE & SUPPORTING ACCESSORIES

111 Providing and laying ISI mark G.I.pipe line with couplings of HEAVY DUTY class and 100 RMT 80.00 ₹ 992.00 ₹

mm in DIA including all taxes, insurance, transportation and lying/fitting excavation of

required gradient, and also including required GI elbow, GI union, GI Tee GI Bend, GI

flange with nuts and supporting accessories etc complete including giving testing to EIC.

(Rate inclusive of Material rate & Labor Rate. payment shall be done on the running

meter of the pipeline.

112 Supplying & fixing of ISI mark CI D/F Sluice Valves, Butterfly Valves & Reflux Valves of NO 3.00 ₹ 3,563.00 ₹

100 mm Diameter, including all taxes, etc., complete. PN-1 with hand wheel /cap operated

(PD type short body) Reference

113 Providing & fixing Non-woven geo-textile fabric sheet of 300gsm (100 % Polypropylene) SMT 812.30 ₹ 132.00 ₹

in position between filling and Compound wall including transportation, loading, unloading,

carting and all necessary labour works etc. completed as directed by Engineer in charge.

TOTAL COST OF CIVIL WORKS IN Rs. ₹

1) All concrete works, including M15, M20, and M25 grades, shall invariably be carried out using a flori machine (such as Ajax or equivalent). The machine

must be duly calibrated, and a valid calibration certificate shall be submitted prior to commencement of work. Batch reports for each batch shall be displayed,

and a printed copy of the same must be generated and maintained for record.

2) In case the borewell water fails to meet the required standards as per relevant IS laboratory testing criteria, the contractor/agency shall arrange potable

water from an external approved source for all concreting and curing works at their own cost.

3) Thermo michanically treated FE 500/500D reinforcemnet bars is carried out with fusion bounded epoxy coating. The thickness of the epoxy coating shall not

less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS - 13620-1993 / ASTM - 775 M & coating of reinforcement bars must be

done at coating plant & test report given by coating plant for each lot at site must be submited at this office.

4) Submission of Dry Film Thickness (DFT) certificates for epoxy coating on exposed concrete surface and tar-extended epoxy coating on underground

concrete surface is mandatory. The DFT shall be measured using approved instruments and certified by the applicator/authorized agency and submitted to