CONSTRUCTION OF HALL NEAR TOWNHALL IN KESHOD MUNICIPALITY AREA AT KESHOD DIST. JUNAGADH

NAME OF WORK: - CONSTRUCTION OF HALL NEAR TOWNHALL IN KESHOD

MUNICIPALITY AREA AT KESHOD DIST. JUNAGADH

SR. NO. DISCRIPTION AMOUNT

SCHEDULE CONSTRUCTION OF HALL NEAR TOWNHALL IN KESHOD

B-1 MUNICIPALITY AREA AT KESHOD DIST. JUNAGADH

I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount

mentioned above.

Tendered amount put to tender Rs.6,30,466.00 Tendered amount put to tender Rs.6,30,466.00

Deduct. % below Rs. Add.: % Above Rs.

President, Chief Officer

Signature of Contractor. Keshod Nagarpalika Keshod Nagarpalika

KESHOD NAGARPALIKA -KESHOD

NAME OF WORK :- CONSTRUCTION OF HALL NEAR TOWNHALL IN KESHOD

MUNICIPALITY AREA AT KESHOD DIST. JUNAGADH

Item Description Qty Unit Rate

1 Excavation for foundation up to 1.5 Meter depth including sorting out

and stacking of useful materials and disposing of excavated stuff up to

50 Meter lead (a) For Loose or Soft soil 8.76 cum 122.94

2 Excavation for foundation up to 1.5 Meter depth including sorting out

and stacking of useful materials and disposing of excavated stuff up to

50 Meter lead (b) Dense or hard soil 8.76 cum 157.16

3 Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead.(C) Hard Murrum 10.70 cum 268.92

4 Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead.(D) Soft rock not requiring Blasting 1.36 cum 276.24

5 Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20 cm. In depth

consolidating each deposited layer by ramming and watering 11.95 cum 136.92

6 Filling in foundation and plinth with murrum or selected soil in layers

of 20 cm thickness including watering, ramming and consolidating etc.

complete. 13.07 cum 301.78

7 Providing and laying cement concrete 1:2:4 (1- cement : 2- coarse sand

: 4- graded stone aggregate 20 mm. Nominal size) and curing complete

excluding cost of form work in : (a) Foundation and plinth 1.59 cum 34105.29

8 Providing and laying cement concrete 1:3:6 (1 Cement : 3- coarse sand

:6- crushed stone aggregate 40 mm. Nominal size) and curing complete

excluding cost of form work in :(a) Foundation and plinth 2.32 cum 3281.49

9 Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete. (upto 10 ton) RCC Column Footing 7.74 cum 4913.65

10 Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete. (upto 10 ton) Column Up to Plinth level 0.16 cum 6763.97

11 Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and reinforcement for

reinforced concrete work in (D) Columns, Pillars posts and struts upto

floor two level. (upto 10 ton) RCC Column GF 1.56 cum 7123.53

12 Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and reinforcement for

reinforced concrete work in (C) Slabs, landing, shelves, Balconies,

Lintels, Beams, Girders and Cantilever upto floor two level. (upto

10 ton) Plinth Beam 2.20 cum 6835.68

13 Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and reinforcement for

reinforced concrete work in (C) Slabs, landing, shelves, Balconies

Lintels, Beams, Girders and Cantilever upto floor two level. (upto

10 ton) RCC Floor Beams at Slab lvl. Ground Floor 1.46 cum 6122.62

14 Providing laying Controlled cement concrete M-200 and curing

complete including the cost of form work and excluding cost of

reinforcement for reinforced concrete work in : RCC Lintels Ground

Floor 0.73 cum 6158.98

15 Providing laying Controlled cement concrete M-200 and curing

complete including the cost of form work and excluding cost of 3.00 cum 6923.55

reinforcement for reinforced concrete work in : RCC Slabs & Landings

16 Providing laying controlled cement concrete M-200 and curing

complete including the cost of form work and excluding cost of

reinforcement for reinforced concrete work in : RCC Chhajja/Sill

Ground Floor 0.41 cum 7218.47

17 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding, and placing in position complete upto floor

two level. Ground Floor 1882.90 Kg. 77.29

18 Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in superstructure above plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional 10.66 cum 4496.05

19 Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-

Cement : 3-coarse sand ) with 2 Nos of 6mm Mild steel round bars after

every three course embedded in Cement Mortar in superstructure above

plinth (B) Conventional 3.00 cum 750.76

20 Providing 15 mm thick cement plaster in single coat on fair side

Brick/concrete walls for interior plastering up to floor two level and

finished even and smooth in & Extra over items for finishing with a

floating coat of neat cement slurry.

(ii) Cement mortar 1:4 ( 1 cement : 4 sand) Ground Floor 75.86 Sqm 222.66

21 Providing 10 mm thick cement plaster in single coat on ceiling and

soffit of stair for interior plastering up to floor two level and finished

even and smooth in & Extra over items for finishing with a floating

coat of neat cement slurry for plastering on ceiling and soffits of stairs

up to floor two level instead of plastering on walls. (ii) Cement mortar

1:4 ( 1 cement : 4 sand) Ground Flool 19.33 Sqm 196.27

22 20 mm thick sand faced cement plaster on walls upto height 10 meters

above ground level consisting of 12 mm thick backing coat of c.m. 1:3

(1:cement - 3:sand) and 8 mm thick finishing coat of c.m. 1:1 (1:cement

- 1:sand) etc. complete 69.47 Sqm 342.41

23 Providing and laying white glazed tiles of 6 mm thick in flooring,

treads of steps and landing laid on a bed of 12 mm thick cement mortar

1:3 (1:Cement - 3-Coarse Sand) finished with flush pointing in white

cement. 3.10 Sqm 868.55

24 Providing and laying white glazed tiles of 6 mm thick in skirting of

steps and dado on 10 mm thick cement plaster 1:3 (1:Cement - 3-

Coarse Sand) and jointed with white cement slurry 14.40 Sqm 1127.48

25 Providing and laying Polished Granite slab (18mm thick) slab flooring

over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-

Coarse sand) or L.M. 1:1.5 laid over and jointed with grey cement

slurry including rubbing and polishing complete (Basic Granite rate

shall be 250/Sft) (A) Granite slab 18mm thick 5.11 Sqm 4229.48

26 Providing and laying Polished Granite slab (18mm thick) is riser of

steps dedo and pillars laid 10mm thick cement mortar 1:3 (1-cement :

3-coarse sand) and jointed with grey cement slurry including rubbing

and polishing etc. complete (Basic Granite rate shall be 250/Sft) 0.91 Sqm 4371.91

27 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

complete for antiskit (upto 10 ton) 12.40 Sqm 1467.72

28 Providing and laying broken china mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar crème

out up to surface using white cement including rounding off junctions

and extending them up to 15cm along the wall clearing with water and

oxalic acid etc. as directed 18.01 Sqm 779.70

29 Providing and fixing 35 mm thick shutters for doors, windows and

clerestory windows and including indian teak wood frames 12 cm x

cm. size including anodized alluminium fixtures and fastenings

including primer coat of approved quality and two coats of oil painting

etc, complete. (ii) Fully Panelled 1.94 Sqm 5533.68

30 Providing & fixing FRP Frame size 100 x 50 mm and 28 mm thick FRP

Depress Pannel Shutter having extra reinforcement on sides and edges

and gel coat finish. The core of the shutter is to be filled up with

injected fire retardant grade polyurethane foam done insitu along with

embedded wooden pieces for stiffing and also for taking hings anf

fixtures. The whole FRP Frame and shutter is to be waterproof weather

proof termite proof and resistance to mild acid / Alkali, rates are to be

inclussive of S.S. hings with necessary screws and alluminium fixtures

and fastening 1.62 Sqm 2377.76

31 Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 63.50 x 38.10 x 1.95 mm(of

Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal Section no:

8687 @ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x

31.75mm x 1.30 mm (of Jindal Section no:8758 @ wt.of 0.0.659

Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal

Section no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm

x 18mm x 1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/

Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

details etc complete for window. 4.83 Sqm 1713.70

32 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats

of primer of approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered smooth. 95.19 Sqm 40.59

33 Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth. 75.86 Sqm 82.85

34 Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth. for ceiling and

Soffit 19.33 Sqm 88.38

35 Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete 69.47 Sqm 120.26

36 Providing and fixing to wall, ceiling and floor 10.0 Kgf/cm2 working

pressure polyethylene pipes of the following outside dia. Low density,

complete with special flange compression type fittings wall clamps etc.

including making good the wall, ceiling and floor.(E) 50 mm. 8.00 Rmt 173.71

37 Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

pipe (SCH-40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equuivalent as approved by

Engineer in charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials. 5.00 Rmt 72.65

38 Providing laying and jointing in true line and level 32mm dia. U.P.V.C.

pipe (SCH-40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equuivalent as approved by

Engineer in charge. Pipe shall be fixed on the wall with the help of 4.00 Rmt 119.15

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

39 Providing and fixing PVC SWR Nahni Trap IS 14735 For Drain

100mm Diameter With jali of the following nominal diameter of self

cleansing design with C.I. Scresd down or Hinged grating including the

cost of cutting and making. 3.00 Each 574.58

40 Constructing brick masonry chamber for under ground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35 Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X

610 mm. Internal dimensions, total weight of cover with frame to be

not less than 38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg)

R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster

15 mm. thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls & abed concrete etc. complete (I) inside

dimensions, 455 mm. 610 mm. And 450 mm. Deep for single pipe line 1.00 Each 2932.93

41 Providing laying and jointing in true line and level 110mm diameter

U.P.V.C. SWR type B pipe conforming to IS 13592-1992 with one end

plain and other end socketed with rubbering, & fitting conforming to

ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110mm dia. x 149 mm

length x 145 mm high at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials. 5.00 Rmt 876.90

42 Providing and fixing in position cowl vent to pipes :

(I) 75 mm dia. 1.00 Each 393.04

43 Providing and fixing to wall ceiling and floor 1.0kg. F/cm2 working

pressure polythene pipes of the following outside Dia. Low density,

complete with special falnge compression type fittings, wall clips etc.

including making good the wall ceiling and floor. (F)75mm 6.00 Rmt 280.23

44 Providing and fixing screw down bib taps of following size :

(A) Brass screw down bib tap polished bright (I) 15mm dia. 1.00 Each 186.83

45 Providing and fixing Pillar Tap, capstan head, screw down high

pressure with screws, shanks and back nuts (A) 15 mm. Dia 1.00 Each 308.73

46 Providing and fixing chromium plated brass half turn flush cock of

approved quality including fixing in pipe line etc. complete.

(ii) 25 mm. Dia 1.00 Each 263.77

47 Providing and fixing C.I. Manhole cover 0.60m x 0.45m size having

weight not less than 35 kgs. 1.00 Each 958.17

48 Providing erecting and fixing double coated coated syntex PVC (ISI)

water tank of required capacity each with all necessary fittings and

connection etc. complete on terrace. 1000.00 Lit 3.95

49 Providing and fixing M.S. grills of required pattern to wooden frames

of windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws.

(A) Plain Grill. 90.00 Kgs. 106.23

50 Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt

and other foreign matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming paint brushing red

lead. 8.93 Sqm 36.74

51 Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter. 8.93 Sqm 92.20

52 Providing and fixing wsh down water closet (European type, W.C. Pan) 1.00 Each 1356.81

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately)(A) vitreous China Pattern :(i) in

53 Providing and fixing 100mm size P or S trap for water closet squatting

pan including jointing the trap with the pan and soil pipe in cement

Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. 1.00 Each 332.39

54 Providing and fixing 12.5 Litres low level flushing cistern with a pair,

of C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet

and overflow pipes, 40mm dia. porcelain enamelled flush bend

including cutting holes in walls and making good the same connecting

the flush bend with cistern and closet (overflow pipe to be measured

and paid for separately)(A) Vitreous China (I) In white colour 1.00 Each 2370.39

55 Providing and fixing in position with clamps etc. 32mm nominal

internal diameter galvanised steel tube flush pipe for high level flushing

cistern including connecting the flush pipe with cistern and closet and

making good the walls and floors. 1.00 Each 275.60

56 Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan 1.00 Each 28.06

57 Point wiring for Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on / in

wall / ceiling with following type accessories Cat. II 4.00 Point 236.34

58 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete Cat. II 8.00 Point 465.61

59 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan

regulator(2M) with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling omplete Cat. II 2.00 Point 654.48

60 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected concealed

in / on surface of wall / ceiling complete with Modular type switch &

pin Plug erected on PVC / Metallic box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[II] For 16A Plug with 2-2.5 sq.mm Cu.

Wire(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. II 2.00 Point 493.89

61 Providing following type of Modular Type Accessories mounted with

pvc / metallic/Wooden box, single mounting base frame covered with

textured / metallic front plate , modules erected with necessary

connection. As desired by Engineer In charge (7) Blank Plate Single

Cat.III 4.00 Each 236.34

62 Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA powder coated and high U.V. & corrosion resistance with

diffuser and/or Polycarbonate optics with company mark/name 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to

6500K, Uniformity ratio >0.7, Luminaireefficacy> 100 lumens/watt,

LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds /

NICHIA / SEOUL/ Bridgelux (U.S.A.) make LED used for luminaire. (

fitting required LM-79 & LM-80 Certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver (i) 5-10 Watts, Surge-2

KV, IP-20, conventional 1 to 2 feet 4.00 Each 165.64

63 Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA powder coated and high U.V. & corrosion resistance with

diffuser and/or Polycarbonate optics with company mark/name 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to

6500K, Uniformity ratio >0.7, Luminaireefficacy> 100 lumens/watt

LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds /

NICHIA / SEOUL/ Bridgelux (U.S.A.) make LED used for luminaire. (

fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

shown.)(A )Square/ Circular Surface/Recessed Mounted Downlight

with provision for spring loaded mounting clips complete.(A ) 22-24

watts, Surge-2 KVCat.III 6.00 Each 758.51

64 Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used)

(E) Single phase 8 way single door 1.00 Each 702.96

65 Supplying & erecting approved make low noise decorative exhaust fan

having size 200mm with 1350 RPM with square frame ABS body with

inbuilt lowers & square frame. 1.00 Each 1703.87

66 providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed

(i) 25 Amps.DP CAT-ll 2.00 Each 1627.11

67 Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved manner as directed

68 Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved manner as directed

69 Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of

25 mm having 200-250 Micron galvanising, connection terminal dia of 1.00 Each 5760.03

12mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of

applications. (b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg.

70 Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of

25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of

applications. Providing and erecting HOT deep Galvanised iron strip

wire 8 to 16 SWG. 3.00 Kg. 77.77

71 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/ceiling ,complete with

6A Modular type switches and following type of accessories erected on

PVC / Metallic box, single mounting base frame covered with textured

/ metallic front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or

H.D.Connector as directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling completeCat. III 1.00 Point 581.76

72 Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C.

Hz 1200 mm sweep complete having 3blades with aluminium blades

with , canopy & 30 cms. down rod erected with 24/ 0.2, 3 core flexible

wire with earthing.(Make shall be approved by Engineer in charge)) 5.00 Each 1948.29

73 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.

Pipe down rod erected duly painted for fan complete with proper

insulation without leckage and earthing. 5.00 Mtr. 108.07

74 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded

to the RCC bars up to 50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing. 2.00 Each 108.07

75 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or

Fan box 2.00 Each 18.18

76 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid PVC pipe and

accessories (a) 2 wire 1.5 sq. mm 20.00 Mtr. 62.62

77 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size(a) with medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm 20.00 Mtr. 82.82

78 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 20.00 Mtr. 112.11

79 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size(a)

with medium class Rigid PVC pipe and accessories(h) 4 wire 6 sq. mm 20.00 Mtr. 260.58

80 Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary IP-

42 protection & above as per requirement made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary supporting angles, flats including

cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge

with erection of supplied switch gears, BUSBARS, with suitable size of

inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos.

of hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection complete. The Panel shall

be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size.

(A) The standard companies switch gear shall be used and only

manufacturers at CPRI approved factory for beneficial use. Sq

(i) with 350mm depth 1.00 Mtr. 10468.65

81 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

flexible Submersible copper cable approved make of following Size.

(B) 3 Core x 2.5 Sq. mm. 20.00 Mtr. 104.03

I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount

mentioned above.

Tendered amount put to tender Rs.6,30,466.00 Tendered amount put to tender Rs.6,30,466.00

Deduct. % below Rs. Add.: % Above Rs.

President, Chief Officer

Signature of Contractor. Keshod Nagarpalika Keshod Nagarpalika