REPAIRS REPLACEMENT OF INTERNAL WIRING AND CONNECTED ITEMS IN OTM AND MD ACCN AT LL BARODA

Amount

Taking down carefully copper / Aluminium point wiring (light, fan, socket or power) including fittings such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc COMPLETE.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including 32mm size PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 1.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 2.7 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly. for the following :-

One light point controlled by one way switch.

One Fan point controlled by one way switch.

One 3 pin 5 Amps socket outlet on same board with other switch.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size.

One light point controlled by two way switches

One bell point controlled by one way switches

All as per item No. 3 above but using 4 Sqmm PVC insulated, unsheathed cable for one 3 pin socket outlet 15 Amps on independent board

M&L in replacement sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed all as directed.

All as above item No. 5 but using 4 Sqmm cable single core copper.

Taking down U/S FTL and S&F of 4' 18W LED Tube With Batten with system lumen output of 1800 lumens. System Efficacy should be > 115lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Surge Protecton of 3KV.All the Photometrical & Electrical parametrs must be supported by LM79-08 test report from NABL Accridiated LAB OR UL, R9 Value > 0. Lamp starting time is not more than 1 Sec. The LED tube light conforms to applicable IS and similar to Crompton LDSL 18-CDL with Master TLED 18W 1800 Lumens complete.

S&F switch piano flush type single pole one way 5 Amp 240 Volts complete.

S&F switch piano flush type single pole two way 5 Amp 240 Volts complete.

S&F switch socket combination 2 in 1, 3 pin, 5 Amps flush type 240 Volt complete.

S&F switch socket combination 3 pin 5 and 15 Amp 2 in one flush with inbuilt indicating lamp complete.

S&F Bell switch including Bell ding dong type, one way, 240 volts, AC, ISI marked complete.

S&F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked complete.

M&L for opening covers of ceiling fan, remove the burnt winding, cleaning the slots and rewinding the fan with supper enammeled copper wire of same wire gauge, warnishing after winding, drying, replacing unserviceable fan bearings No 6201/6202 for 1200.1400mm sweep, greasing, soldering the copper terminal of winding with single core copper multistraded wire of 0.5 sqmm and re-assembling fan, replace of fan capacitor 1.7/2.5mfd and making connection with fan capacitor and connector block, Including Painting fan and blade with synthetic enamelled paint of one coat and marking of MES No, transoporting back after repair, assembling the blades and hanging the fan in its own position to existing fan clamp and down rod with necessary Nut, bolt and washer and testing for smooth functioning after repair complete. Note : Quoted rate deems to inclusive of rate of fan capacitor, fan bearing and transporatation charges.

S&F energy efficient 5 star rated ceiling fan 1200mm sweep, single phase 230/240 volts AC and connecting up to including provn of porcilin connector and flexible three core copper conductor of size 23/0.0076 from ceiling rose or connector to ceiling fan and testing complete. Note : Old fan shall be deposited to AGE E/M store yard through RV.

S&F in repair TPN DBs Vertical type 4 way with provision for FP as incomer and SP as outgoing IP 43-IK 09 with metal door and similar to CAT No. 6077 50 of Legrand complete.

S&F in repair sheet metal enclosure for single pole and neutral 08 way 240 voilts, 100 Amp rated bus bar, IP 43 - IK -09 and similar to CAT No. 6077 11 of Legrand complete

S&F MCB TPN 63 Amps 35 KA rupturing capacity complete

S&F MCB SPN 32 Amps 10 KA rupturing capacity complete.

MCB SP 5 to 30 Amp 240 Volts complete

S&F connecting resistance type fan regulator A/C 240 Volts complete.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps complete.

M&L in replacement KAPITRODE Earthing complete with Cast Iron pipe electrode, 75mm bore, 3.15mm wall thickness , 2.9 metres length,with GI pipe & funnel, buried directly and preferably vertically in ground with top edge not less than 2.9 metres below ground level connected with earthing lead of 25 x 5mm dia galvanised iron strip all as specified including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1 of size 450x450x450mm with Cast iron cover with suitable handle. (c) 40 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (d) Requisite quantity of BFC Compound (bentonide powder) and black cotton soil. (e) Testing of earthing. NOTE :- On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost. .

S&F in replacement wall security light LED type with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt and similar to CAT Part No.LSTO-25-CDL 25watt of CG complete.

S&F in replacement of 7 W LED Bulb with system lumen output of 600 lumens. System Efficacy should be > 85lm/ W. TheLamp Should have Cool Daylight Color temp of 6500K . Lamp should be supplied with E27 Holder and Similar to Philips Ace Saver complete.

S&F in replacement 9 W LED Bulb with system lumen output of 600 lumens. System Efficacy should be > 85lm/ W. TheLamp Should have Cool Daylight Color temp of 6500K and Similar to Philips Ace Saver complete.

S&F in replacement of 14 W LED Bulb with system lumen output of 600 lumens. System Efficacy should be > 85lm/ W. TheLamp Should have Cool Daylight Color temp of 6500K and Similar to Philips Ace Saver complete.

S&F in replacement electronic ballast suitable for tubelight of 40 Wattt complete

S&F AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, basis current 10 A, Max continuous current 600% of basis current conforming to IS-13779 and relevant IEC standards complete. Note : Old meter shall be deposited to AGE E/M store yard through RV.

S&F in replacement 4' feet LED 1X20W LED tube rod on replacing existing 36/40watt fitting with system lumen output of minimum 2000 lumens suitable for G13 holder with single side connection. The Luninaire should have cool daylight color temp 6500K, CRI >80, PF >0.95, Life class of 40,000 burning hrs with 70% lumen maintenance, Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection > 2 KV. LED to mounted on Rod and not directly on the surface of the tube. All the photometrical & electrical parameters must be supported by LM 79-08 test report from NABL accredited LAB or UL switching cycle of 50,000 times. The LED tube light conforms to applicable IS 10322/EN 60598 and similar to CG model No : LT8-20-865-2 complete.

Taking down storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection from main and repairing the water heater storage type capacity 25/35 ltrs of any type and make, checking the serviceablity of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly and testing complete (considered as one unit) (Supply only for parts against unserviceable parts shall be measured and paid for separately under relavent items given below)

Supply only for replacement of heating elements, 1.5 KW 230 volts

Thermostat immersion point type 15 Amps, 230/250 volts/AC ISI marked

S&F in replacement switch socket combination 2 in 1, 3 pin, 5 Amps flush type 240 Volt. Make Anchor/SSK/CONA or its equivalent.

S&F in replacement switch socket combination 3 pin 5 and 15 Amp 2 in one flush with inbuilt indicating lamp. Make Anchor/SSK/CONA or its equivalent.

S&F storage, vertical type water heater including heating element and all accessories, fixing arrangement etc of capacity 25 ltrs complete Note : Old geyser shall be deposited to AGE E/M store yard through RV.

S&F Exhaust Fan 450mm size single phase 1400 RPM max air 6120 M3/Hr free delivery 3600 sound level 65-70 complete with louvers complete. Note : Old fan shall be deposited to AGE E/M store yard through RV.

S&F Exhaust Fan 380mm size single phase 1400 RPM max air 3250 M3/Hr free delivery 1910 sound level 60-65 complete with louvers complete. Note : Old fan shall be deposited to AGE E/M store yard through RV.

S&F Exhaust Fan 300mm size single phase 1400 RPM max air 1710 M3/Hr free delivery 1000 sound level 50-55 complete with louvers complete. Note : Old fan shall be deposited to AGE E/M store yard through RV.

Badri Electricals

LAXMI CORPORATION

M/s. RAMESH NARHARI VALEKAR