Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.3 Cr
EMD Value
₹2.4 L
Closing Date
4 Oct 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Balance Civil, Electrical, Plumbing, External Development and all other associated work necessary for completion /Functioning of the Building at SHQ BSF BARAMULLA-(I), (J&K)
NBCC/SBG-N/BSF-Baramulla-I/01~EW1c5952ac3958f953306d0f8b
NBCC/SBG-N/BSF-Baramulla-I/01
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹2.4 L
4 Oct 2022
7 Sept 2022
4 Oct 2022
7 Sept 2022
4 Oct 2022
ITEM NO Unit Qty. Rate Amount
Head Civil Work DSR-2018 Items
Sub- Sub-Head : Earth Work
Head:A
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas
(exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and
disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge.
2.6.1 All kinds of soil Cum 750.00 181.85 136387.50
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.
2.8.1 All kinds of soil. Cum 600.00 252.30 151380.00
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and
dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil,
2.10 and then returning the soil as required, in layers not exceeding 20 cm in depth, including
consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil
as directed, within a lead of 50 m :
2.10.1 All kinds of soil
2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. Metre 25.00 223.00 5575.00
2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 77.38 364.20 28182.52
Extra for excavating trenches for pipes, cables etc. in all kinds of soils for depth exceeding 1.5m, but
2.11 not exceeding 3m.(Rate is over corresponding basic item for depth upto 1.5 metre). (127% of Metre 2.00 283.21 566.42
corresponding Item i.e. of 2.10.1.1)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in
2.25 layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, Cum 413.11 219.65 90739.61
lead up to 50 m and lift up to 1.5 m.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and
dressing complete.
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm
2.28 deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m.
2.28.1 All kinds of soil. Sqm 899.00 24.35 21890.65
2.29 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same.
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth
2.31 up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance Sqm 899.00 12.55 11282.45
of 50m outside the periphery of the area cleared.
Total (A) DSR Items 602248.16
Sub- Sub-Head : Concrete Work
Head:B
Providing and laying in position cement concrete of specified grade excluding the cost of centering
and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand(zone-III) : 8 graded stone aggregate 40 mm nominal size). Cum 161.00 5789.60 932125.60
4.3 Centering and shuttering including strutting, propping etc. and removal of form work for :
Digitally signed by OM
PAGE-1 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
4.3.1 Foundations, footings, bases for columns. Sqm 317.00 284.85 90297.45
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2
coarse sand(Zone III) : 4 graded stone aggregate 12.5mm nominal size).
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of per 50kg
cement as per manufacturer’s specification. cement
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality
4.13 using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and Sqm 11.00 110.00 1210.00
finally with apiece of cloth lightly soaked in kerosene oil.
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size,
well rammed and consolidated and grouted with fine sand, including necessary excavation leveling
and dressing and finishing the top smooth.
Total (B) DSR Items 1094625.60
Sub- Sub-Head : Reinforced Cement Concrete
Head:C
5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 50.45 284.85 14370.68
5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sqm 700.00 609.30 426510.00
5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 146.64 693.05 101628.85
5.9.4 Shelves (Cast in situ) Sqm 79.91 693.05 55381.63
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 20.00 552.05 11041.00
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 50.00 733.70 36685.00
5.9.7 Stairs, (excluding landings) except spiral-staircases Sqm 2.00 622.35 1244.70
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses,
bands, copings, bed plates, anchor blocks and the like
5.9.16 Edges of slabs and breaks in floors and walls
5.9.16.1 Under 20 cm wide m 60.00 173.25 10395.00
5.9.16.2 Above 20 cm wide Sqm 5.00 737.30 3686.50
5.9.19 Weather shade, Chajjas, corbels etc., including edges Sqm 5.00 766.75 3833.75
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 15000.00 83.50 1252500.00
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement
concrete for reinforced cement concrete work, using cement content as per approved design mix,
including pumping of concrete to site of laying but excluding the cost of centering, shuttering,
finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to
accelerate, retard setting of concrete, improve workability without impairing strength and durability
as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per
design mix is payable/recoverable separately).
5.33.1 All works upto plinth level Cum 70.00 7997.30 559811.00
5.33.2 All works above plinth level upto floor V level Cum 70.00 9400.85 658059.50
Add for using extra cement in the items of design mix over and above the specified cement content
5.35 Quintal 96.00 673.30 64636.80
therein.
Total (C) DSR Items 3200354.11
Sub- Sub-Head : Masonry Work
Head:D
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation
and plinth in:
Digitally signed by OM
PAGE-2 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 20.00 6157.45 123149.00
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level in all shapes and sizes in :
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 20.00 7590.45 151809.00
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level.
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 14.00 932.10 13049.40
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half
brick masonry.ird course of half brick masonry.
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non
6.44 modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine Metre 120.00 52.00 6240.00
Total (D) DSR Items 295368.80
Sub- Sub-Head : Cladding Work
Head:E
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,
machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of
required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1
cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy
touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.
complete at all levels.
8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble
8.2.1.1 Area of slab upto 0.50 sqm Sqm 1.00 2777.40 2777.40
8.2.1.2 Area of slab over 0.50 sqm Sqm 1.00 2552.65 2552.65
8.2.2 Granite of any colour and shade
8.2.2.1 Area of slab upto 0.50 sqm Sqm 2.00 4217.35 8434.70
8.2.2.2 Area of slab over 0.50 sqm Sqm 11.00 4007.65 44084.15
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine
8.3 polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-
Charge.
8.3.1 Marble work Metre 150.00 220.35 33052.50
8.3.2 Granite work Metre 150.00 376.25 56437.50
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of
8.4 width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. Metre 46.00 434.25 19975.50
Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform,
8.5 vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar Each 32.00 734.55 23505.60
taps etc. including moulding, rubbing and polishing of cut edges etc. complete
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be
specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle
8.31 green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, Sqm 733.00 1030.30 755209.90
over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey
cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching
shade complete.
Total (E) DSR Items 946029.90
Digitally signed by OM
PAGE-3 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Sub- Sub-Head : Wood and P.V.C. Work
Head:F
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with
matching wood beading
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded
wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination
9.18 Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever
required, edges to be painted with polyurethane primer (fittings to be paid separately).
9.18.2 25 mm thick Sqm 78.00 1548.45 120779.10
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative
type, core of block board construction with frame of 1st class hard wood and well matched
commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of
shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 119.00 1886.70 224517.30
25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with
necessary screws.
9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :
9.47.2 25 mm dia (heavy type) Metre 200.00 162.35 32470.00
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary
screws etc. complete :
9.63.4 100x10 mm Each 174.00 38.70 6733.80
Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with
necessary screws bolts, nut and washers etc. complete.
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws
etc. complete :
9.66.3 75 mm Each 176.00 23.90 4206.40
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc.
complete :
9.74.1 250x10 mm Each 50.00 373.65 18682.50
9.74.2 200x10 mm Each 50.00 299.85 14992.50
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of
lever handles of approved quality with necessary screws etc. complete.
9.81 Providing and fixing bright finished brass handles with screws etc. complete:
9.81.1 125 mm Each 100.00 204.65 20465.00
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.
complete.
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not
9.101 less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with
necessary screws etc. complete.
9.101.2 Twin rubber stopper Each 20.00 62.05 1241.00
Total (F) DSR Items 651154.00
Sub- Sub-Head : Steel Work
Head:G
Structural steel work in single section, fixed with or without connecting plate,including cutting,
10.1 hoisting, fixing in position and applying a priming coat of approved steel primer all complete Kg 100.00 86.05 8605.00
Digitally signed by OM
PAGE-4 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,
10.2 including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all Kg 200.00 101.75 20350.00
complete.
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top
/centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of
10.11 standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted,
including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but
excluding the cost of other fittings, complete all as per approved design, (sectional weight of only
steel members shall be measured for payment).
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C.
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from
commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if
required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed
10.14 mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges
2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a
coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
10.14.2 Profile C
10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb. Metre 281.60 444.35 125128.96
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately).
10.14.2.2 Metre 5.00 433.65 2168.25
10.14.3 Profile E
10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb. Metre 20.00 484.50 9690.00
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal
dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper
10.18 bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round Each 71.00 172.25 12229.75
headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as
per standard drawing.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and
10.25 applying a priming coat of approved steel primer using structural steel etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kg 4000.00 131.00 524000.00
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x
3mm and nuts & bolts complete.
10.29.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides. Sqm 120.00 709.30 85116.00
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory
windows all complete with :
10.30.1 4.0 mm thick glass panes. Sqm 61.00 900.55 54933.55
10.30.2 5.5 mm thick glass panes. Sqm 112.00 1194.85 133823.20
Total (G) DSR Items 1975044.71
Sub-Head Sub-Head : Flooring
11.13 Providing and fixing glass strips in joints of terrazzo/ cement concrete floors.
11.13.1 40 mm wide and 4 mm thick. Metre 10.00 75.15 751.50
Digitally signed by OM
PAGE-5 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Marble stone flooring with 18mm thick marble stone as per sample of marble shall be approved by
Engineer-in-charge over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement slurry including rubbing and polishing complete with :
11.23.2 Raj Nagar plain. Sqm 60.00 1960.75 117645.00
11.24 Extra for pre finished nosing to treads of steps of marble stone. Metre 100.00 530.25 53025.00
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre .
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement
11.26 slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
11.26.1 25 mm thick. Sqm 1333.00 1531.85 2041956.05
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average)
thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with
pigment to match the shade of the slabs, including rubbing and polishing complete.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the
manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White,
11.37 Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Sqm 150.00 926.90 139035.00
jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and
matching pigment etc., complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the
manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved
11.41 make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand)
jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and
matching pigments etc., complete.
11.41.2 Size of Tile 600x600 mm Sqm 185.00 1500.55 277601.75
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with
water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours &
11.46 shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse
sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement &
matching pigments etc. complete.
11.46.2 Size of Tile 600x600 mm Sqm 20.00 1545.85 30917.00
Total (H) DSR Items 2960462.55
Sub- Sub-Head : Roofing
Head:I
Providing and fixing false ceiling at all height including providing and fixing of frame work made of
special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm
(both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick
with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with
12.45 dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle
hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of
angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200
mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered
flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
Digitally signed by OM
PAGE-6 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out
of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5
mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230
mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help
of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish
of tapered and square edges of the board with recommended jointing compound , jointing tapes ,
finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two
coats of primer suitable for board, all as per manufacturer's specification and also including the cost
of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels
suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but
excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with
BIS certification marks)
Total (I) DSR Items 535354.35
Sub- Sub-Head : Finishing
Head:J
13.1 12 mm cement plaster of mix :
13.1.2 1:6 (1 cement: 6 fine sand) Sqm 2336.00 254.25 593928.00
13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :
13.2.2 1:6 (1 cement: 6 fine sand) Sqm 989.00 292.85 289628.65
13.16 6 mm cement plaster of mix :
13.16.1 1:3 (1 cement: 3 fine sand) Sqm 656.00 227.35 149141.60
Extra for plastering exterior walls of height more than 10 m from ground level for every additional
height of 3 m or part thereof.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50
13.42 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's
specification.
13.42.1 Two or more coats on new work. Sqm 5884.00 87.15 512790.60
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface :
13.43.1 Water thinnable cement primer. Sqm 5884.00 60.00 353040.00
13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm).
13.50 Applying priming coat :
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and
soft wood)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
13.61.1 Two or more coats on new work. Sqm 1922.00 121.55 233619.10
Total (J) DSR Items 2515064.30
Sub- Sub-Head : Road Work
Head:K
Digitally signed by OM
PAGE-7 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after
excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road
roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus
earth with lead upto 50 metres.
Extra for compaction of earth work in embankment under optimum moisture conditions to give at
least 95% of the maximum dry density (proctor density).
16.3 Supplying and stacking at site.
16.3.1 90 mm to 45 mm size stone aggregate. Cum 169.00 1840.05 310968.45
16.3.2 63 mm to 45 mm size stone aggregate. Cum 169.00 1535.65 259524.85
16.3.6 Stone screening 13.2 mm nominal size (Type A). Cum 9.00 1727.65 15548.85
16.3.7 Stone screening 11.2 mm nominal size (Type B). Cum 9.00 1978.50 17806.50
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform
thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to
16.4 proper grade and camber, applying and brooming requisite type of screening / binding material to fill Cum 405.00 767.25 310736.25
up interstices of coarse aggregate, watering and compacting to the required density
Providing and applying tack coat using hot straight run bitumen of grade VG - 10 including heating
16.30 the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler,
cleaning and preparing the existing road surface as per specifications :
16.30.1 On W.B.M. @ 0.75 Kg / sqm. Sqm 1350.00 42.05 56767.50
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2mm and
11.2mm size respectively per 100 sqm. and 52 kg. and 56 kg. of hot bitumen per cum of stone
16.33 chippings of 13.2 mm and 11.2mm size respectively including a tack coat with hot straight run
bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete.(tack coat to
be paid for separately) :
With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per
kg of asphalt.
Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180
micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine
aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing
with road roller all complete.
Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed
road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade including
cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.
16.48.1 New work (Two or more coats). Sqm 100.00 215.95 21595.00
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30
grade made by block making machine with strong vibratory compaction, of approved size, design &
16.68 shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse Sqm 25.00 859.35 21483.75
sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete
in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3
coarse sand), including making joints with or without grooves (thickness of joints except at sharp
16.69 curve shall not to more than 5mm), including making drainage opening wherever required complete Cum 10.00 8376.15 83761.50
etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for
payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
Total (K) DSR Items 1695914.25
Digitally signed by OM
PAGE-8 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Sub- Sub-Head : Water Proofing
Head:L
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed
portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound
conforming to IS 2645 in recommended proportions including rounding off junction of vertical and
horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing
compound in recommended proportion including rounding off junction of vertical and horizontal
surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm
wide and pasted to each other with bitumen @ 1.7 kg/sqm).
Total (L) DSR Items 180659.20
Non-Schedule Item
Sub- Sub-Head : Water Proofing
Head:M
Providing & Laying cement concrete using broken brick/brickbats 25 mm to100 mm size with 50% of
NS-1 cement mortar 1:5 ( 1cement : 5 coarse sand )admixed with proprietary water proofing compound Cum 163.63 2989.95 489234.17
conforming to is :2645 in sunken and like complete.
Storage to be formed of 19mm commercial board at the back with fixed shelves made of 19mm thick
commercial board with all exposed edges finished with 2mm thick PVC edge band (factory finished)
as per details & architect approval. Shutters of cabinet to be formed of 19mm thick commercial board
finished with 1mm thk laminate on outer surfaces and enamel painted whitefrom inside as er
specifications.. Rear backing of cabinet to be formed with 12mm commercial plywood complete in all
respect including 100mm high laminate finished skirting as per approval/details.The cupboard shall
have 2 nos drawer running on 12mm drawer channelof best quality of approved makes. one drawer
shall be lockable. the brass lcok shall be used for the same. the drawer shall have 100mm Long SS
NS-3 handles fixed by cutting a chase in the front of the drawer. Storage to be complete with hardware sqm 135.00 7773.88 1049473.77
installed as per the appoved model/make & as directed to consist of the following: Each Shutter to
have 3 nos of automatic spring loaded hinge of approved make installed strictly a per manufacturers
guidelines with requisite tools/jigs. Each set of shutters to be provided with 1no. multi purpose lock
as specified, SS handles size 600mm long as per approval, auto bolt, etc. (as per approved make)
Basic price of Laminate @ Rs.550/ Sqmt (front area to be measured from bottom i/c height of
leg/skirting to top of cabinet). the depth of cupborad shall be 600mm depth including the thickness of
the backing ply.Hardware: All hardware shall be as per the appoved model/make all complete.
Total (L) Non-Schedule Items 1538707.94
Head Plumbing- DSR 2018 Items
L Sub-Head : Sanitary Installations
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P
or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting
and making good the walls andfloors wherever required:
Digitally signed by OM
PAGE-9 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid,
10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,
17.3 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof
coupling of approved municipal design complete, including painting of fittings and brackets, cutting
and making good the walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each 3.00 6685.00 20055.00
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of
430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with
17.4 standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including
painting of fittings and brackets, cutting and making good the walls and floors wherever required :
17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 15.00 4982.25 74733.75
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass
17.7 waste of standard pattern, including painting of fittings and brackets, cutting and making good the
walls wherever require:
17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 31.00 3087.70 95718.70
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets
17.10 and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good
the walls wherever required :
17.10.1 Kitchen sink with drain board
17.10.1.3 510x1040 mm bowl depth 200 mm. Each 2.00 5584.10 11168.20
17.10.2 Kitchen sink without drain board
17.10.2.1 610x510 mm bowl depth 200 mm. Each 1.00 3631.55 3631.55
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
17.28.2 Flexible pipe
17.28.2.1 32 mm dia Each 10.00 101.10 1011.00
17.28.2.2 40 mm dia Each 30.00 101.10 3033.00
17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.
Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm
17.70.1 from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing Each 32.00 335.25 10728.00
not less than 260 gms
Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm
17.70.2 from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing Each 10.00 348.60 3486.00
not less than 263 gms
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance
17.71 from wall of standard shape with bracket of the same materials with snap fittings of approved quality Each 32.00 158.55 5073.60
and colour, weighing not less than 105 gms.
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm,
weighing not less than 190 gms.
Total (M) DSR Items 367625.30
Sub- SUBHEAD-I(B): SANITARY INSTALLATIONS (NON-SCHEDULED ITEMS)
Head:N
Providing and Fixing 15mm C.P brass mixing fitting for kitchen sink with swinging spout complete.
Including cutting and making good the walls wherever required .
C.P. brass mixing fitting Each 4.00 1255.78 5023.12
Digitally signed by OM
PAGE-10 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Supply, Installation, Testing & Commissioning stainless steel cockroch trap consisting of 0.45 mm
NSP-2 thick inner and outer cup and 1.00 mm thick top grating (Jali) with ring to be fixed inside ‘P’ traps
with cement concrete.
110x110 mm Each 1.00 557.14 557.14
Total (N) DSR Items 5580.26
Sub- SUBHEAD-II(B) : SOIL, WASTE & VENT PIPES(NON -SCHEDULE ITEMS)
Head:O
Providing and fixing UPVC pipes type-B confirming to IS: 13592 for soil waste and vent pipes on wall
NSP-3 face/floor Supreme/equivalent make including jointing with seal ring with solvent cement/glue Metre 150.00 226.38 33957.63
jointing etc. 75 mm DN.
Providing and fixing UPVC pipes type-B confirming to IS: 13592 for soil waste and vent pipes on wall
NSP-4 face/floor Supreme/equivalent make including jointing with seal ring with solvent cement/glue Metre 120.00 342.85 41142.38
jointing etc. 110 mm DN.
Providing and fixing on wall face/floor moulded/accessories for unplasticised Rigid PVC water pipes
NSP-5 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 25.00 122.07 3051.64
cement/glue jointing, 75 mm Coupler
Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes
NSP-6 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 28.00 145.68 4079.15
cement/glue jointing, 110 mm Coupler
Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes
NSP-7 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 45.00 182.44 8209.84
cement/glue jointing, 75x75x75 mm Plain T.
Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes
NSP-8 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 25.00 239.87 5996.85
cement/glue jointing, 110x110x110 mm Plain T.
Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes
NSP-9 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 12.00 198.15 2377.86
cement/glue jointing, 75x75x75 mm T with door.
Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes
NSP-10 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 4.00 250.35 1001.40
cement/glue jointing, 110x110x110 mm T with door.
Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes
NSP-11 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 25.00 119.97 2999.26
cement/glue jointing, 75 mm Bend 87.5 degree
Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes
NSP-12 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 8.00 125.56 1004.51
cement/glue jointing, 110 mm Bend 87.5 degree
Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes
NSP-13 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 25.00 376.91 9422.71
cement/glue jointing, 110 mm dia P trap
Providing and fixing Upvc floor drain of following size inlet and outlet including cutting and making
NSP-14 good the walls and floors wherever required complete in all respect, 110x63 mm outlet IS : 14735 Each 60.00 167.11 10026.72
Type B, including jointing with seal ring solvent cement/glue jointing
Total (O) DSR Items 123269.93
Sub- Sub-Head : Water Supply
Head:P
Digitally signed by OM
PAGE-11 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &
cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with
18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent
cement and testing of joints complete as per direction of Engineer in Charge. : Internal work -
Exposed on wall
18.7.1 15 mm nominal outer dia. Pipes. metre 5.00 241.55 1207.75
18.7.2 20 mm nominal outer dia. Pipes. metre 3.00 306.95 920.85
18.7.3 25 mm nominal outer dia .Pipes. metre 5.00 369.20 1846.00
18.7.4 32 mm nominal outer dia. Pipes. metre 4.00 480.55 1922.20
18.7.5 40 mm nominal outer dia. Pipes. metre 6.00 648.60 3891.60
18.7.6 50 mm nominal outer dia. Pipes. metre 5.00 903.50 4517.50
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &
cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at
18.8 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the 0.00
cost of cutting chases and making good the same including testing of joints complete as per direction
of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.
18.8.1 15 mm nominal outer dia .Pipes. metre 143.00 409.65 58579.95
18.8.2 20 mm nominal outer dia .Pipes. metre 138.00 478.15 65984.70
18.8.3 25 mm nominal outer dia .Pipes. metre 70.00 561.95 39336.50
18.8.4 32 mm nominal outer dia .Pipes. metre 40.00 679.15 27166.00
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the
walls etc. : Internal work – Exposed on wall.
18.10.1 15 mm dia. nominal bore metre 2.00 284.90 569.80
18.10.2 20 mm dia. nominal bore metre 3.00 344.10 1032.30
18.10.3 25 mm dia. nominal bore metre 10.00 438.00 4380.00
18.10.4 32 mm dia. nominal bore metre 5.00 529.70 2648.50
18.10.5 40 mm dia. nominal bore metre 5.00 639.60 3198.00
18.10.6 50 mm dia. nominal bore metre 12.00 786.75 9441.00
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. :
External work
18.12.1 15 mm dia. nominal bore metre 2.00 244.15 488.30
18.12.2 20 mm dia. nominal bore metre 4.00 283.80 1135.20
18.12.3 25 mm dia. nominal bore metre 10.00 364.55 3645.50
18.12.4 32 mm dia. nominal bore metre 10.00 424.70 4247.00
18.12.5 40 mm dia. nominal bore metre 40.00 483.15 19326.00
18.12.6 50 mm dia. nominal bore metre 30.00 565.25 16957.50
18.12.7 65 mm dia. nominal bore metre 50.00 716.00 35800.00
18.12.8 80 mm dia. nominal bore metre 100.00 866.40 86640.00
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing
tee, including cutting and threading the pipe etc. complete :
18.13.1 25 to 40 mm nominal bore Each 2.00 673.45 1346.90
18.13.2 50 to 80 mm nominal bore Each 4.00 1432.75 5731.00
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making
18.14 long screws etc. complete (cost of water meter and stop cock to be paid separately). Each 1.00 606.55 606.55
18.15 Providing and fixing brass bib cock of approved quality : 0.00
18.15.1 15 mm nominal bore Each 32.00 302.55 9681.60
18.15.2 20 mm nominal bore Each 5.00 326.45 1632.25
Digitally signed by OM
PAGE-12 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
18.16 Providing and fixing brass stop cock of approved quality : 0.00
18.16.1 15 mm nominal bore Each 2.00 302.55 605.10
18.16.2 20 mm nominal bore Each 4.00 326.45 1305.80
18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 0.00
18.17.1 25 mm nominal bore Each 4.00 497.15 1988.60
18.17.1A 20 mm nominal bore Each 1.00 460.20 460.20
18.17.2 32 mm nominal bore. Each 2.00 581.25 1162.50
18.17.3 40 mm nominal bore Each 2.00 678.40 1356.80
18.17.4 50 mm nominal bore Each 2.00 869.20 1738.40
18.17.5 65 mm nominal bore Each 1.00 1488.10 1488.10
18.17.6 80 mm nominal bore Each 1.00 2217.90 2217.90
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats
complete :
18.18.1 15 mm nominal bore Each 4.00 338.70 1354.80
18.18.2 20 mm nominal bore Each 5.00 386.40 1932.00
18.18.3 25 mm nominal bore Each 3.00 394.00 1182.00
18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 0.00
18.19.1 25 mm nominal bore 0.00
18.19.1.1 Horizontal Each 4.00 477.70 1910.80
18.19.1.2 Vertical Each 3.00 504.45 1513.35
18.19.2 32 mm nominal bore 0.00
18.19.2.1 Horizontal Each 3.00 641.75 1925.25
18.19.2.2 Vertical Each 2.00 708.65 1417.30
18.19.3 40 mm nominal bore 0.00
18.19.3.1 Horizontal Each 3.00 792.40 2377.20
18.19.3.2 Vertical Each 3.00 979.70 2939.10
18.19.4 50 mm nominal bore 0.00
18.19.4.1 Horizontal Each 4.00 1144.05 4576.20
18.19.4.2 Vertical Each 3.00 1251.10 3753.30
18.19.5 65 mm nominal bore 0.00
18.19.5.1 Horizontal Each 1.00 2043.95 2043.95
18.19.5.2 Vertical Each 1.00 2057.35 2057.35
18.19.6 80 mm nominal bore 0.00
18.19.6.1 Horizontal Each 1.00 2890.70 2890.70
18.19.6.2 Vertical Each 1.00 3399.10 3399.10
18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : 0.00
18.21.2 45 cm length 0.00
18.21.2.1 15 mm nominal bore Each 132.00 83.00 10956.00
18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 0.00
18.22.2 150 mm diameter Each 50.00 188.80 9440.00
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement
:4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover
fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm
18.32 nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 0.00
graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1
cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per
standard design :
18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 5.00 1582.45 7912.25
Digitally signed by OM
PAGE-13 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed
priming coat, both of approved quality for new work :
18.38.1 15 mm diameter pipe. metre 2.00 15.20 30.40
18.38.2 20 mm diameter pipe. metre 3.00 18.15 54.45
18.38.3 25 mm diameter pipe. metre 10.00 23.70 237.00
18.38.4 32 mm diameter pipe. metre 5.00 28.40 142.00
18.38.5 40 mm diameter pipe. metre 5.00 33.40 167.00
18.38.6 50 mm diameter pipe. metre 12.00 39.80 477.60
Providing and filling sand of grading zone V or coarser grade all- round the G.I. pipes in external
18.41.1 15 mm diameter pipe metre 2.00 142.60 285.20
18.41.2 20 mm diameter pipe metre 4.00 144.55 578.20
18.41.3 25 mm diameter pipe metre 10.00 148.40 1484.00
18.41.4 32 mm diameter pipe metre 10.00 152.25 1522.50
18.41.5 40 mm diameter pipe metre 40.00 154.15 6166.00
18.41.6 50 mm diameter pipe metre 30.00 159.95 4798.50
18.41.7 65 mm diameter pipe metre 50.00 252.45 12622.50
18.41.8 80 mm diameter pipe metre 100.00 260.15 26015.00
18.41.9 100 mm diameter pipe metre 30.00 275.60 8268.00
18.41.10 150 mm diameter pipe metre 10.00 410.50 4105.00
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long
screws etc. complete (New work)
18.46.1 15 mm nominal bore Each 5.00 235.75 1178.75
18.46.2 20 mm nominal bore Each 12.00 261.15 3133.80
18.46.3 25 mm nominal bore Each 12.00 340.10 4081.20
18.46.4 32 mm nominal Each 10.00 384.25 3842.50
18.46.5 40 mm nominal bore Each 5.00 452.50 2262.50
18.46.6 50mm nominal bore Each 5.00 598.10 2990.50
18.46.7 65mm nominal bore Each 8.00 939.30 7514.40
18.46.8 80 mm nominal bore Each 10.00 1018.20 10182.00
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 0.00
18.49.1 15 mm nominal bore. Each 84.00 418.95 35191.80
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and
weighing not less than 810 gms.
18.50.1 15 mm nominal bore. Each 5.00 618.80 3094.00
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make
conforming to IS:8931.
18.52.1 15 mm nominal bore. Each 50.00 606.25 30312.50
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality
conforming to IS:8931 :
18.53.1 15mm nominal bore Each 132.00 532.00 70224.00
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as
18.53A Each 10.00 61.25 612.50
per direction of Engineer-in-charge.
18.58 Providing and fixing PTMT grating of approved quality and colour. 0.00
18.58.1 Circular type. 0.00
18.58.1.2 125 mm nominal dia with 25 mm waste hole. Each 88.00 51.25 4510.00
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated
aluminium rod with L.P./ H.P.H.D. plastic ball.
18.62.5 50mm nominal bore, 242 mm long. Weighing not less than 1240 gms. Each 2.00 1250.30 2500.60
Digitally signed by OM
PAGE-14 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75
mm with concealed fitting arrangements. Weighing not less than 106 gms.
Total (P) DSR Items 741761.90
Sub- Sub-Head : Drainage
Head:Q
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff
19.6 mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints
etc. complete :
19.6.2 150 mm dia. R.C.C. pipe Metre 120.00 462.60 55512.00
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C.
top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone
19.7 aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3
coarse sand) finished with floating coat of neat cement and making channels in cement concrete
1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a
floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm
19.7.1 internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg
and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 9.00 10905.05 98145.45
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm
19.7.2 internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg
and weight of frame 58 kg) :
19.7.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2.00 22939.65 45879.30
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at
top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement
mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement, foundation
19.9 concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and
making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per
standard design :
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal
diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed
19.9.1 in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including centering, shuttering all complete.(Excavation, foot rests and 12 mm thick cement plaster at
the external surface shall be paid for separately) :
19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 11038.10 11038.10
Extra depth for circular type manhole 0.91 m internal dia (at bottom) beyond 0.91 m to 1.67 m
19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 m 1.00 6448.40 6448.40
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in
cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement
mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation
19.11 concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and
making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per
standard design :
Digitally signed by OM
PAGE-15 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal
diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed
19.11.1 in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including centering, shuttering all complete.(Excavation, foot rests and 12 mm thick cement plaster at
the external surface shall be paid for separately) :
19.11.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 21235.65 21235.65
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :
19.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 m 1.00 8368.40 8368.40
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS :
10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mm x
25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space
between protruded legs having 2 mm tread on top surface by ribbing or chequering besides
19.16 necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and Each 10.00 463.05 4630.50
suitable to with stand the bend test and chemical resistance test as per specifications and having
manufacture's permanent identification mark to be visible even after fixing, including fixing in
manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand :6 graded stone
aggregate 20 mm nominal size) complete as per design.
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and
approved quality
19.19.2.2 Circular shape 500 mm internal diameter Each 4.00 1035.60 4142.40
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the
weight of cover to be not less than 4.5 kg.
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with
19.32 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 25278.75 25278.75
Total (Q) DSR Items 286021.35
Sub- DSR-2018 INTERNAL ELECTRICAL
Head:R
1.0 WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable in surface / recessed medium class PVC conduit,with modular
switch, modular plate, suitable GI box and earthingthe point with 1.5 sq.mm. FRLS PVC insulated
copper conductorsingle core cable etc as required.
1.10.2 Group C Point 328.00 990.00 324720.00
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core
cable in surface /recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable
1.11 Point 40.00 1057.00 42280.00
GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable
etc. as required.
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in
1.12 surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper Metre 1646.00 200.00 329200.00
conductor single core cable for loop earthing as required.
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable
1.13 in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper Metre 706.00 308.00 217448.00
conductor single core cable for loop earthing as required.
Digitally signed by OM
PAGE-16 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated
1.14 copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00
1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 1500.00 146.00 219000.00
1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 200.00 249.00 49800.00
1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Metre 100.00 394.00 39400.00
1.14.10 4 X 10 sq. mm + 2 X 10sq. mm earth wire Metre 60.00 543.00 32580.00
Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor,
unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
1.18.2 2 Pair Metre 120.00 20.00 2400.00
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,
1.19 shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed Metre 30.00 33.00 990.00
steel/ PVC conduit as required.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
1.21 surface/recess including cutting the wall and making good the same in case of recessed conduit as 0.00
required.
1.21.1 20 mm Metre 95.00 146.00 13870.00
1.21.2 25 mm Metre 2172.00 165.00 358380.00
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box
including connections but excluding modular plate etc. as required.
1.24.6 Telephone socket outlet Each 8.00 119.00 952.00
1.24.7 TV antenna socket outlet Each 6.00 119.00 714.00
Supplying and fixing stepped type electronic fan regulator on the existing plate switch box
including connections but excluding modular plate etc. as required.
Supplying and fixing blanking plate on the existing plate & switch box excluding plate as required.
1.27 Supplying and fixing following size, GI box & cover plate as required. 0.00
1.27.1 1 or 2 Module (75mmX75mm) Each 50.00 243.00 12150.00
1.27.3 4 Module (125mmX75mm) Each 20.00 287.00 5740.00
1.27.4 6 Module (200mmX75mm) Each 35.00 333.00 11655.00
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in
recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required. (For light plugs to be used in non residential
buildings).
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in
1.32 recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps Each 94.00 495.00 46530.00
modular switch, connection etc. as required.
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including
connection etc as required.
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing
1.35 upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as Each 87.00 98.00 8526.00
required.
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting
of all types, complete with all accessories and tube/lamp etc. irectly on ceiling/ wall, including
connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing
etc. as required.
Digitally signed by OM
PAGE-17 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard
length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including
providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
Installation of exhaust fan in the existing opening, including making good the damage, connection,
testing, commissioning etc. as required.
1.50.1 upto 450mm sweep Each 33.00 363.00 11979.00
1.51 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. Each 33.00 168.00 5544.00
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal
enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in
recess, with chained metal cover for the socket out let and complete with connections, testing and
commissioning etc. as required.
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I.
fittings including trenching (75 cm deep)and re-filling etc as required
14.13.1 50 mm dia Each 40.00 536.00 21440.00
2.0 MCCB, MCB & DB'S 0.00
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic
2.2 release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, 0.00
making connections, etc. as required.
2.2.3 150 A, 16 KA,TPMCCB Each 1.00 4688.00 4688.00
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB
distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned
2.5 copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and 0.00
incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are
required.)
2.5.1 4 way (4 + 12), Double door Each 6.00 5651.00 33906.00
2.5.2 8 way (4 + 24), Double door Each 9.00 7744.00 69696.00
2.5.3 12 way (4 + 36), Double door Each 1.00 9828.00 9828.00
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker
2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections, 0.00
testing and commissioning etc. as required.
2.10.1 Single pole Each 228.00 199.00 45372.00
2.10.4 Triple Pole Each 5.00 826.00 4130.00
2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete
with connections, testing and commissioning etc. as required.
2.12.1 40 amps Each 10.00 339.00 3390.00
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current
2.15 circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with 0.00
connections, testing and commissioning etc. as required.
2.15.1 25 A Each 4.00 2526.00 10104.00
2.15.2 40 A Each 10.00 2626.00 26260.00
2.15.3 63 A Each 5.00 2777.00 13885.00
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2
2.21 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on Each 10.00 226.00 2260.00
front side as required.
EARTHING 0.00
Digitally signed by OM
PAGE-18 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry
5.2 enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and Each 4.00 5308.00 21232.00
salt as required.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode,
including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be
5.9 Metre 41.00 131.00 5371.00
done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia
5.12 G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as Metre 22.00 188.00 4136.00
required.
Total (R) DSR Items 2127328.00
Sub- FITTING AND FIXTURES
Head:S
Supply, Installation, testing,commissioning, receiving the lighting fixture & fan including assembling
etc. of the following lighting fixtures including fixing arrangement and with all accessories as required
with necessary GI pipe/steel pipe etc as required for hanging of lighting fixtures.
Supplying, instalation, testing & commissioning of All fixtures shall be complete with lamps and
required control gear.All fluorescent tube light fixtures & LED fixtures shall be complete with control
gear & power factor improvement capacitor. Only high quality Electronic Ballasts are to be used. For
dimmable fixtures, HF dimmable electronic ballast to be used.Samples of all the fixtures with all
available colour shall be submitted to the architect/ client/ Project Manager before supply & approval
is taken.Please check the fixtures final quantity from the Architect / Project Manager before ordering
and be sure of actual requirement prior to ordering.
i LUMILINEBS18WLED865SPCWH, HAVELLS MAKE Each 10.00 605.17 6051.67
ii LUMILINEBS9WLED865SPCWH, HAVELLS MAKE Each 10.00 557.33 5573.27
iii LUMILINEBS20WLED865SPCWH, HAVELLS MAKE Each 150.00 661.78 99266.46
Supply of Ceiling Fan of 1200mm sweep complete erected in position with all accessories.(Make-
vi Each 120.00 1764.26 211710.97
Havels or equivalent)
Supplying of approved make Exhaust Fan of the following sizes and its all accessories suitable for
operation on 230V single phase, 50 Hz, AC supply complete as required.
a) 380 mm sweep (1400rpm) Each 33.00 4572.24 150883.83
b) 300 mm sweep (1400rpm) Each 33.00 3803.22 125506.30
Supplying installation, testing commissioning of telephone tag block or similar specification of other
approved makes. of the following sizes
a) 10 Pair Each 2.00 1328.74 2657.47
Supplying & fixing of following capacity TP&N MCB inside the existing panel board with drilling holes in
cubicle panel, making connections, etc. as required.
a) 40 Amps TPN Each 6.00 2151.57 12909.42
b) 63 Amps TPN Each 6.00 2162.33 12974.01
FIRE SUPRESSION SYSTEM
Supply of ISI marked (IS:2878) Squeeze Grip carbon-di-oxide gas type fire extinguisher with cylinder
NSF-04 of 4.5 kg. capacity complete with suitable length hose and horn duly charged and ready for use GI Each 4.00 13678.44 54713.76
bracket for wall mounting etc. as required.
Supply of ISI marked (IS:13849) ABC dry powder 6 kg. fire extinguisher with cylinder fully charged
NSF-05 complete with bakelite horn discharge tube, GI bracket for wall mounting etc. as required. Each 4.00 7313.43 29253.71
Digitally signed by OM
PAGE-19 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
Providing and fixing of 2W LED based Exit Sign Board (Bajaj BHEX 20 R AC or other makes of similar
NSF-06 Nos 4.00 12059.08 48236.33
specification) as complete required.
NSE-7 STREET LIGHT FEEDER PILLER:
Supply, installation, testing and commissioning of Street Light Feeder piller suitable for operation on
415V, 50 Hz, 5 wire, AC system capable of withstanding fault level of 16KA, 415 volts. The panel shall
be outdoor, floor standing, Thermoplastic Polycarbonate, compartment type enclosure of IP-54 (EN
60 529) with necessary bus bar and cable alleyes and panel size of 1700x2050x710mm. The
incoming and outgoing feeders shall be accomodated in a multi-tier arrangement, earting, sign
writing, numbering shall be complete with foundation channel as per specifications & single line
diagram and comprise of the following switchgear and accessories: (Shop drawing to be got approved
by the Engineer-In-Charge prior to fabrication).
a) INCOMER
i) 1 No. 63A 4P 16KA MCCB with Thermal Magnetic Release with Rotary Extended Handel
ii) 1 No. 63A 4P 25KA CONTACTOR
iii) 3 Nos. CT's 60/5A
iv) 3 Nos. R, Y B PHASE Indicator Lamp- LED type 220VAC
v) 2 Nos. ON/OFF Indicator Lamp- LED type 220VAC
vi) 2 Nos. Start/ Stop Push Button
vii) 3 Nos. 06A Control MCB
b) BUS-BAR
1 Set - 200A TPN electrolytic aluminium bus bar for complete panel suitable for 25KA fault level
covered with colour coded PVC sleeves.
c) OUTGOING
i) 4 Nos.- 40A, 3 Pole MCB, having breaking capacity of 10KA Set 1.00 79841.33 79841.33
Supply of 1.1 KV grade PVC insulated PVC sheathed XLPE aluminium conductor armoured cable
NSE-8 conforming to IS:1554 Part-I of the following sizes (Shop drawing of cable layout to be got aproved 0.00 0.00
by the Engineer-In-Charge prior to purchase).
a) 4 C x 25 Sqmm (for feeder Piller) Mtr 120.00 381.52 45782.17
b) 4 C x 10 Sqmm (for Street light) Mtr 510.00 254.74 129919.47
Supply, installation, testing & commissioning of Havells Cat.
NSE-9 No.ENDURACITYLITEPLAT+SL48WLED757PASYBOPC or similar specifications of other approved make Each 17.00 6178.44 105033.49
with all accessories complete as required. (Post Top Lantern)
Supply and installation of Octagonal Pole Pole 4 mtr. long bottom diameter 130mm, top diameter
NSE-10 Each 17.00 11327.14 192561.39
70mm and base plate 210x210x12mm, foundation bolts 600x20mmx4Nos.
Total (S) DSR Items 1312875.06
SCHEDULE ITEMS: EXTERNAL ELECTRICAL WORKS
Head:T
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in
the existing surface/ recessed steel/ PVC conduit as required.
1.17.12 3 x 2.5 sq. mm Metre 68.00 75.00 5100.00
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry
5.2 enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and Set 5.00 5308.00 26540.00
salt as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing
5.18 Metre 1020.00 37.00 37740.00
surface/ recessed conduit/ submain wiring/ cable as required.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of
7.1 following size direct in ground including excavation, sand cushioning, protective covering and refilling 0.00
the trench etc as required.
Digitally signed by OM
PAGE-20 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Description of Items
ITEM NO Unit Qty. Rate Amount
7.1.1 Upto 35 sq. mm Metre 189.00 323.00 61047.00
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of
following size in the existing RCC/ HUME/ METAL pipe as required.
7.5.1 Upto 35 sq. mm Metre 189.00 31.00 5859.00
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade
of following size on wall surface as required.
7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 252.00 39.00 9828.00
Supplying and making end termination with brass compression gland and aluminium lugs for following
9.1 size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as
required.
9.1.32 4 X 10 sq. mm (25mm) Each 34.00 219.00 7446.00
9.1.34 4 X 25 sq. mm (28mm) Each 2.00 250.00 500.00
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6
11.3 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as 0.00
required.
11.3.1 Above 4.5 metre and upto 6.5 metre Each 17.00 4492.00 76364.00
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC
14.14 collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) 0.00
and refilling etc as required.
14.14.1 100 mm dia Metre 30.00 525.00 15750.00
Total (T) DSR Items 246174.00
GRAND TOTAL BOQ 23401624.00
GRAND TOTAL BOQ 23401624.00
Digitally signed by OM
PAGE-21 of 21 OM PRAKASH
PRAKASH 18:05:21 IST
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
001NIT.pdf
Tender Document
3AMAKES.pdf
Tender Document
4DRG.pdf
Tender Document
5GCCWITHAMND01to17.pdf
Tender Document
6Specification.pdf
Tender Document
2BOQ.pdf
Tender Document
corrigendum-1039-CORRIGENDUM-III.pdf
pdf • 0.78 MB
corrigendum-1010-CORRIGENDUM-02.pdf
pdf • 0.69 MB
corrigendum-999-CORRIGENDUM-01.pdf
pdf • 0.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .