GE AF/AMB-25/2020-21 REPAIRS TO JOINERY, FLOORING, ROOF, PERIODICAL SERVICES AND MISCELLANEOUS B/R WORKS AT SITE-IV (KALPI) UNDER GE (AF) AMBALA

Amount

Taking down wooden chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frames) and disposing off complete all as specified and directed

Taking down wooden chowkats or frames exceeding 1.5sqm but not exceeding 4sqm each with shutters (without taking off shutters from the frames) and disposing off complete all as specified and directed

Taking down wooden shutters of size not exceeding 1.0sqm and disposing off complete all as specified and directed

Taking down wooden shutters of size exceeding 1.0sqm but not exceeding 2.0sqm and disposing off complete all as specified and directed

Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part thereof) complete all as specified and as directed

Dismantling brick tiles or terracing tiles, single layer on roofs, sorting and stacking serviceable tiles and disposing off unserviceable tiles complete all as specified and as directed

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc. or insulation boards/slabs/blankets, any thickness including cover fillets, frameworks, etc. complete all as specified and as directed

Taking up or down 15mm bore steel water tubing and connections including cleaning and setting aside for refixing or disposing off, etc. complete all as specified and as directed

Taking up or down 20mm bore steel water tubing and connections including cleaning and setting aside for refixing or disposing off, etc. complete all as specified and as directed

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris complete all as specified and as direc

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in cover slabs, removing debris from site and making good the disturbed surfaces / portions in existing specifications complete all as specified and as directed

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed

Dismantling stone slabs / tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and disposing off complete all as specified and as directed

Dismantling and taking down, overhead water storage tanks 250/500litres capacity, including disconnecting from water mains, etc. plugging, etc. including all necessary staging, liftting & lowering, etc. and disposing off complete all as specified and as directed

Dismantling timber scantlings 40sqcm and over in section, in unframed works in any position and disposing off complete all as specified and as directed

M&L for dismantling rusted / damaged MS roof sheeting any type and disposing off complete all as specified and as directed

Dismantling asbestos cement (corrugated/semi corrugated) / GI sheeting (any type) in roof coverings, etc including ridges, claddings, etc. and disposing off including all necessary staging / scaffolding, etc. as required complete all as specified and as directed

M&L for cutting holes in brick walls in cement mortar, for inserting holdfasts (depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall - exceeding half but not exceeding one brick thick) and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per square metre complete all as specified and as directed

M&L for plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate as in foundation filling, mass concrete, etc. complete all as specified and as directed

M&L for plain cement concrete type B-0,1:2:4 (using 12.5mm graded stone aggregates) as in roof kerbs, channels, etc. complete all as specified and as directed

M&L for plain cement concrete type B-1,1:2:4 (using 20mm graded stone aggregates) in locking of edges of inter-locking tiles, padding, PCC bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, etc. complete all as specified and as directed

M&L for 25mm thick plain cement concrete type B-0,1:2:4 (using 12.5mm graded stone aggregates) as in floors, etc. finished to receive floor finishes, etc. complete all as specified and as directed

M&L for plain cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregate as in padding on roof for receiving roof treatment, stops, kerbs, etc. complete all as specified and as directed

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in beams, cantilevers, lintels, fins, fascia, louvers, parapets, railing, shelves, walls, etc. and similar works over 1.5m span including all necessary formwork, etc. complete all as specified and as directed

M&L for 40mm thick brick tiles laid over and including 15mm thick cement mortar screed in 1:6, jointed and grouted flush in cement mortar 1:3 in roofs complete all as specified and as directed

--ditto-- all as per serial item No. 28 hereinabove but except tiles complete all as specified and as directed Note: Serviceable brick /terracing tiles obtained under taking down hereinabove shall be reused in this item

M&L for mild steel TMT bars grade Fe-500D, 10mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for mild steel round bars 8 to 10mm dia and over, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in supports to chain link fencing complete all as specified and as directed

S&F steel work in tubular trusses including special shaped washers, etc. using ERW or induction butt welded tubes conforming to IS-1161-1979 structural grade 240 complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed

--ditto-- all as per serial item No. 33 hereinabove but except bricks

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan as in half brick thick walls built in CM (1:4) complete all as specified and as directed

M&L rendering 15mm thick in cement mortar (1:6) on fair surfaces of PCC block / brick masonry wall / concrete surfaces, inner sides of drains, etc. finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 5mm thick plaster, in cement mortar (1:3) on fair faces of concrete surfaces of soffits of slabs, ceilings, etc. finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 15mm thick on roof or concrete surfaces including flashings, junctions of parapets, etc. in (10+5)mm thick in two coát in CM (1:4) with finishing coat mixed with water proofing compound at rate of 3% of cement or as per manufacturer's instructions, finished even and fair without using extra cement complete all as specified and as directed

Supply only water proofing compound all as specified

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brickwall or concrete surfaces complete all as specified in SSR Part-I clause 14.22 complete all as specified and as directed Note: Rough cast finish shall be made as under: (i) After applying the under coat of cement mortar 1:3 and while it is still in plasic state the rough cast mixture consisting of crushed stone or fine gravel / aggegates (of size between 6 to 12mm depending on the texture required) mixed with course sand and cement in the ratio of 1:1:1 shall be applied and finished even (ii) The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered

M&L for preparing of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for preparing of old steel/ metal surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint (tint as approved) to fencing posts, angles, fencing, etc. including all staging, safety measures for working at heights upto 6m complete all as specified and as directed

M&L for preparing of new wooden surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide primer complete all as specified and as directed

M&L for preparing of old wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint (tint as approved) complete all as specified and as directed

M&L for preparation of old surfaces and painting with spray gun to asbestos cement / MS sheet roofs, etc. surfaces of any description over 10cm in width or girth not otherwise described with two coats of synthetic enamel paint in camouflage pattern including staging, etc. as required complete all as specified and as directed

M&L preparation of new plastered / unplastered masonry / concrete wall surfaces, etc. and applying two coats of exterior acrylic anti-fungal paint (tint as approved by the GE) over a coat of wall primer as per manufacturer's instructions with all staging as required complete all as specified and as directed

M&L preparation of old treated plastered / unplastered masonry / concrete wall surfaces, etc. and applying one coat of exterior acrylic anti-fungal paint (tint as approved by the GE) as per manufacturer's instructions with all staging as required complete all as specified and as directed

M&L for preparing of new plastered or unplastered surfaces and applying two coats of cement based paint (of approved tint) over a coat of chalk whitening on walls complete all as specified and as directed

M&L for preparing of old plastered or unplastered, treated / untreated wall surfaces and applying one coat of cement based paint (of approved tint) including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed

M&L preparation of newly plastered / unplastered surfaces and applying two coats of white / colour wash on walls / ceilings, etc. complete all as specified and as directed

M&L preparation of old plastered / unplastered, treated / untreated surfaces and applying one coat of white / colour wash on walls, etc. complete all as specified and as directed

M&L preparation of old plastered / unplastered, treated / untreated surfaces and applying one coat of white / colour wash on ceilings, etc. complete all as specified and as directed

M&L for preparation of new masonry / concrete wall / ceiling surfaces and applying two coats of oil emulsion distemper over a coat of wall primer including a coat of wall care putty 1mm thick including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed

M&L for preparation of old masonry / concrete, treated / untreated wall surfaces and applying one coat of oil emulsion distemper including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed

M&L for preparation of old masonry / concrete, treated / untreated ceiling surfaces and applying one coat of oil emulsion distemper including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed

M&L for non-skid ceramic tiles, coloured, 7 to 8mm thick, joint free, edge cut, exceeding 0.11sqm and not exceeding 0.18sqm in size, of superior quality on floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed

M&L for glazed ceramic tiles, coloured of size 450x300x7 to 8mm thick, of superior quality on vertical faces, dados, skirting, risers, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed

M&L for non-skid ceramic tiles, coloured, 7 to 8mm thick, joint free, edge cut, exceeding 0.11sqm and not exceeding 0.18sqm in size, of superior quality on vertical surfaces / skirting / cladding, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed

M&L for vitrified tiles, coloured, 10mm thick, joint free, edge cut, area of each tile not exceeding 0.36sqm, of superior quality on floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed

M&L for vitrified tiles, coloured, 10mm thick, joint free, edge cut, area of each tile not exceeding 0.36sqm, of superior quality on vertical surfaces / skirting / cladding, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed

M&L machine cut and machine polished kota stone slab 18 to 20mm thick as in flooring in single piece laid over and including 10mm thick backing coat in CM 1:4 (rate shall be included), set and jointed in neat cement slurry and pointed with cement and pigments to match the shade of slab including rubbing and polishing etc. complete all as specified and as directed

M&L for 18-20mm thick granite stone slab, of any type, table rubbed and polished, in steps, jambs, pillars, window cills, cooking platforms and the like in laid over and including 20mm thick screed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed

M&L for 18-20mm thick granite stone slab, of any type, table rubbed and polished, in vertical surfaces, skirting, dado and the like in laid over and including 10mm thick screed in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed

M&L for 10mm thick, anti-skid, coloured, abrasion resistant vitrified tiles of size 300x300mm, having flexural strength more than 35N/sqmm crushing strength geater than 1700N, laid in floors, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 20mm thick bedding screed in CM 1:4 complete all as specified and as directed

M&L for chequered cement concrete tiles 300x300x25mm thick, set, jointed and pointed in neat cement slurry in floors laid 20mm over bedding layer in CM 1:4 (cost shall be inclusive) complete all as specified and as directed

M&L for laying pre-polished 80mm thick rubber moulded, double glossy, coloured, designer, interlocking tiles made of M-40 design mix concrete of approved design and shape with the crushing strength not less than 250kg/sqcm laid over and including 25mm thick (compacted thickness) sand bed (rate shall be inlcuded) complete all as specified and as directed

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

M&L 35mm thick factory made plain framed paneled door shutter (two panels) 2nd class HW rail and style with lock rail and panels of 12mm thick ISI marked veeneered particle board with commercial veeneering on both faces, with size of rail and style shall be as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc and divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, sizes of members of shutters as specified in clause 8.20 9(b) of SSR Part-I, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., supplied and fitted to chowkats complete all as specified and as directed

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain/wooden grain printed coloured PVC sheet reinforced with MS square tube all as per specifications and drawing given in SSR Part-I 2009 all as per manufacturer's instructions and making good the disturbed surfaces complete all as specified and as directed

S&F factory made solid panel PVC door shutter, 30mm thick, consisiting of MS frame made out of MS tubes for top and bottom rails, MS frame shall be moulded with plain coloured PVC 'C' channel and having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain coloured PVC sheet top rail, lock rail and bottom rails, paneling of plain coloured PVC sheet to be fitted in MS frame welded / sealed to stiles and rails with suitable PVC sheet beading and jointed together using solvent and fixed in position in frame as per site requirement and specified in MES Schedule 2010 complete all as specified and as directed Door Width Size of style Size of rails exceeding 1.5' but not exceeding 2' 50mm 50mm exceeding 2' but not exceeding 2.5' 50mm 75mm exceeding 2.5' but not exceeding 3' 75mm 100mm exceeding 3' 100mm 125mm

S&F steel window (box type) factory fabricated, double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02Nos for each leaf) duly welded, with glazing bars dovetailed or welded including MS fillets, welding of guard bars with one shop coat of red oxide zinc chrome primer overall complete all as specified and as directed Notes: (i) Windows shall be fabricated as per CE Palam drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 (updated up to date) and these drawings shall be referred at the O/o the GE (AF) Ambala (ii) Glazing, wire gauge, guard bars will be measured and paid separately under respective items herein (iii) Any other sundries, etc. as required at site shall be deemed to be included in the quoted rate

S&F anodised (thickness of anodisation shall be 15microns) aluminium window shutter and frame, double shutter, glazed, size of frame 150x44.5mm of 18 gauge, 5mm thick reflector sole sheet glass, stainless steel hooks & eyes, jointing cleats, glazing clips, rubber beading / packing, aluminium anodised snap beading, screws, aluminium anodised fittings like peg stays 150mm long (1No. for each leaf), 100mm long stainless steel hinges type B-21 (02Nos. fixed on each leaf), aluminium handle 75mm long, 'D' type (01No. for each leaf) and 200mm long aluminium tower bolts (2Nos. in each leaf) complete all as specified and as directed

Supplying and fixing in position anodised (minimum thickness of anodising shall be 15microns) aluminium door and chowkhat made out of hollow extruded aluminium sections as detailed, each door having 02Nos disc or 'D' type handles, 02Nos aluminium tower bolts 200mm size, one brass mortice lock six levers with key in duplicate, fixed with aluminum hinges to chowkhat shutter, partly glazed with 5mm thick tinted glass and partly paneled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading / gasket anodized aluminium beading screws, etc. complete all as specified and as directed Section details: Chowkhat Frame: 101.60x44.45x1.5mm thick Shutter vertical/stile: 83.50x44.45x1.50mm thick Shutter middle rail: 83.50x44.45x1.5mm thick

Supply and fixing in position anodised (minimum thickness of anodising shall be 15microns) aluminium sliding window / ventilator (Bombay sliding window) and chowkhat made out of hollow extruded aluminium sections as detailed, glazed with tinted glass 4mm thick fixed with glazing clips, rubber beading /gasket anodized aluminium beading screws and lock type handles of size 75mm, 2Nos aluminium tower bolts 150mm long etc complete all as specified and as directed Section details: Shutter top & bottom: 101.60 x 44.45 x 1.5mm thick Shutter inner lock rail: 37.50x15x1.5mm thick Shutter side (handle) rail 37.50x15x1.36mm thick Chowkat bottom: 50.30x26x1.20mm thick Chowkat top & sides: 50.30x15x1.00mm thick

M&L for aluminium anodised (minimum thickness of anodising shall be 15microns), white or tint as approved, grill of design DG-104 pattern (10X5.2mm), fixed with anodised aluminium 'F' sections (20.6x15.2x1mm) to aluminium window / ventilators, etc all as per manufacturer's instructions complete all as specified and as directed

M&L for taking down aluminium door shutters of any description of size exceeding 1.5sqm but not exceeding 4sqm each for replacing rubber beading, aluminium cleats, packings, rusted screws, easening, etc. and refixing same and checking thorough serviceability complete all as specified and as directed

S&F false ceiling with powder coated GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with 2Nos. unequal flanges of 20 & 30mm and web 27mm fixed to surrounding wall using nylon sleeves at 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m in length) of 0.55mm thickness, having curled web of 50mm and flange 26mm each with lips of 10.5mm fixed to intermediate channel with connecting clips at 457mm c/c to 6mm dia GI hangers (1.2m long) adjusting level fixed to roof slabs by means of ceiling cleats made of GI flat 40x3mm, 60cm long and expansion hold fasteners 12.5mm dia 40mm long including 9 to 10mm thick ceiling boards / tiles (of approved design) of size 600x600mm for insulation and accoustic purposes, decorative type, with silver foil coating on backsides fixed with staples on snap grid with and including 4mm dia GI wire, nuts, bolts, washers, etc. complete all as specified and as directed

S&F in repairs mortice locks, six levers, with set of 2Nos. keys of approved design and type complete all as specified and as directed

S&F butt hinges, 100mm size, medium weight, stainless steel complete all as specified and as directed

S&F butt hinges, 75mm size, medium weight, stainless steel complete all as specified and as directed

S&F 150mm long, aluminium door handles, cast type with back plate 3mm thick, complete all as specified and as direct

S&F 100mm long, aluminium door handles, cast type with back plate 3mm thick, complete all as specified and as direct

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed

S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed

S&F 250mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed

S&F in repairs 150mm, ordinary rat tail rod pattern helical door springs including roller and roller plate fixed with screws to wooden frames or duly welded to steel frames complete all as specified and as directed

S&F in repairs door closer aluminium body, hydraulically regulated, designation No. 3 universal type suitable for door shutter 851 to 1000mm wide, of weight between 61 to 80kgs and fixing complete all as specified and as directed

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, complete all as specified and as directed

S&F in repairs 20mm dia fancy type powder coated (tint as approved) aluminium curtain / drapery rods / towel rails, etc. of rod wall thickness 1mm (min), including pair of aluminium, powder coated brackets, holders with funnel at ends complete all as specified and as directed

S&F in repairs galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

S&F 3mm thick plain / sheet glass, ordinary quality, cut to required size and shape for windows, etc. in glazing not exceeding 0.5sqm in area with oil putty including hacking off old glass and putty fillings, etc. complete all as specified and as directed

S&F steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for protection of electric clables complete all as specified and as directed for the following bores:

15mm bore

20mm bore

Fixing only steel water tubing, medium grade, galvanised with screwed and socketed joints, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for protection of electric clables complete all as specified and as directed for the following bores: Note: Serviceable tubings obtained from serial item Nos. 8 & 9 will be reused under this item

15mm bore

20mm bore

S&F in repairs 15mm dia stop cocks, concealed type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm dia angle valves, concealed type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm dia brass chromium plated fancy type, hot and cold wall mixer, with telephonic shower and arm complete all as specified and as directed

S&F in repairs 15mm dia brass chromium plated fancy type, hot and cold basin / sink mixer complete all as specified and as directed

S&F in repairs 15mm dia pillar taps, fancy type, cast copper alloy, with capstain heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT'/'COLD', with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed

S&F in repairs 15mm dia bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm dia bib taps, fancy type, long body with wall flanges, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repairs soap dish, cast copper alloy, chromium plated, approximate size 160x160x90mm of approved design duly fixed on walls with cadmium plated screws complete all as specified and as directed

S&F in repairs towel ring, cast copper alloy, chromium plated, 6/8'' dia of approved design duly fixed on walls with cadmium plated screws complete all as specified and as directed

S&F in repairs toilet paper holder cast copper alloy chromium plated fixed to walls with cadmium plated brass screws complete all as specified and as directed

S&F 15mm PVC connections, 600mm long with brass couplings, PTMT nuts, etc. complete all as specified and as directed

S&F 125mm dia mild steel chromium plated grating fixed on floors / trap with CM 1:6 complete all as specified and as directed

S&F brass chromium plated shower rose 125mm size, with or without swivel joint, fixed to 15mm bore pipe complete all as specified and as directed

S&F health faucet, 15mm bore, telephone type, with CP arms, flexible pipe (ABS body) with 1.0m long PVC tube and wall hook of approved finish complete all as specified and as directed

S&F 10litres capacity PVC flushing tank, syphonic action type, low level, valveless, with PVC inlet ball valve, PVC flush pipe, float, chain and pull and suitable sized brackets including cutting of floor / wall and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing and taking down of old PVC flush tank and disposing off complete all as specified and as directed

S&F in repairs vitreous China squatting pan, Orissa pattern of size 580x440mm, white, with integral foot rests and 'P' or 'S' trap including lime concrete bedding, connecting and flushing pipe and trap complete all as specified and as directed

S&F in repairs vitreous China wash down water closet pan (Pedestal pattern), coloured (as approved), with 'P' or 'S' trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and as directed

S&F vitreous China bowl urinal flat back half stall of size 465x355x265mm (minimum), white, with grating and union for discharge pipe, including providing fixing plugs, brackets, grating, union and connections to flushing pipe, bedding urinal against wall in CM 1:2, securing bowl with plugs and 60mm long brass screws, pointing around urinal bowl in white cement (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed

S&F in repairs vitreous China partition, 20mm thick, white, of size 310x700mm fixed with and including suitable stainless steel chromium plated bullet hinges 200mm long, etc. duly gouted in walls complete all as specified and as directed

S&F in repairs wash hand basin, vitreous China, coloured, flat back type, of size 550x490mm, including CI brackets, cutting for and pinning in ends of brackets with coupling and including PVC connection 60cm key with brass union complete all as specified and as directed

S&F in repairs sink with drainage board overall size 915mmx460mm and bowl size 410x330x160mm, made of stainless steel 1mm thick for kitchen with plugs, washer and waste including including fixing cantilever brackets duly grouted in walls with CM 1:4 and connection union to pipe complete all as specified and as directed

S&F 50mm bore, low density polyethylene pipes (LDPE) of pressure rating 6kgf/sqcm fixed to walls, ceilings or in floors, etc. complete all as specified and as directed

Supplying, hoisting, fixing and connecting up 500litres capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. complete all as specified and as directed

S&F in position aluminium-zinc colour coated high tensile alloy steel trap sheeting of 0.5 to 0.53mm thick, high rib, having 550 Mpa yeild strength BMT 0.45mm and zinc (galvanized) and aluminum combined coating of 150 gms/sqm (AZ-150) of 0.50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDPE polyester of 18 to 20micron and back coat of 5 to7 micron epoxy primer fixes, RMR 1040 profile width 1125mm in roofing panels / sheeting complete as per manufacturer's instructions, all as specified and as directed Note: The sheet shall be fixed to MS angles with self drilling and self topping screws conforming to AS 3566 with moulded EPDM washers

M&L for Atactic Poly Propaneylene (APP) modified bituminous membrane, weight not less than 4.0kg/sqm, reinforced with non-woven polyester fibre @160gm/sqm by torch method as per manufacturer's instructions complete all as specified and as directed Specifications for membrane: (i) Softening point 150oC minimum (ii) Cold flexibility (-)2oC minimum (iii) Single centre core non-woven polyester reinforcement of not less than 160gm/sqm (iv) Tensile strength of 650N/sqcm and 450N/sqcm in longitudinal and transverse directions respectively (v) Minimum elongation of >20% in both directions (vi) Dimensional stability of 1% maximum (vii) Water tightness / impermiable at 2kgf/sqcm (viii) Water absorption of not more than 1% on mass within 24hrs (ix) Overlaps of minimum 100mm on longitudinal direction and 150mm along transverse direction shall be maintained while laying

Anil jindal and sons

Esha Engineers

Puneet Sharma