Providing Anti-skid Flooring tiles in toilets at Four Mada Toilets ,Tirumala

Dismantling, clearing away and carefully stacking materials useful for re-use, terracing work in roofs or floors - do - Flat and pan tiles or Mangalore tiles over flat tiles without roof timbers

Flooring with Antiskid floor tiles 1st quality of all series & shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply). - do - Non-skid red or white full body Ceramic floor tiles of size 450 x 450 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges are to be provided for fixing the door with the frame

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked 580 x 440 mm confirming to IS:2556-Part-3-1981 with "P" or "S" trap ISI Mark or equivalent brand approved by the department.

Supplying and Fixing European Water Closet of 1st quality confirming to IS:2556-Part-2-1973 of white glazed with 'P' trap with ISI mark or equivalent brand approved by the department.

Supply & fixing of PVC low level cistern parry ware, slim line with internal components & short bend: 10 Litres capacity Single Flush

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996

Supplying & Fixing white glazed flat back half stall urinals 1st quality confirming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm confirming to IS:2556 - Part 6, Sec-6-1974 fixed with screws complete Indian make with ISI mark or equivalent approved by the department. 410 x 265 x 305 mm

SYMET 2 in 1 Faucet (1 mts. Tube) with hook ( Prayag make CAT.NO:187) as directed during execution.

Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series, Chrome finish with 7 years warranty

supply and fixing 12.7mm dia NP pillar cock heavy duty 1st quality Indian make (400 grams)

Supply & fixing of Waste coupling Jaquar make, Chrome finish with 7 years warranty

SYMET 2 in 1 Faucet (1.50 mts. Tube) with hook ( Prayag make CAT.NO:188) as directed during execution.

Supplying & fixing NP coat hook

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (lS 15778.2007).

54.00 mm OD pipe SDR - 13.50

28.60 mm OD pipe SDR - 13.50

22.20 mm OD pipe SDR - 13.50

Supplying and fixing Gunmetal Gate (GM peet) valve as per IS - 778 Class-I, Indian make heavy type - 50 mm nominal bore size.

Supplying and fixing Gunmetal Gate (GM peet) valve as per IS - 778 Class-I, Indian make heavy type - 25 mm nominal bore size.

Supply of round jalli

4" (101.6mm) Nahany Trap [without inlet & jali] UPVC/ SWR pipe fittings [prince/ sudhakar or any ISI Brand]

Supplying, laying and jointing in position the following dia metre of Prince / Sudhakar make or equilent quantity PVC/ SWR pipes 4Kg/sqcm including labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc., including fixing necessary fiittings like bends, plugs, couplers, junctions, tees, etc., with solvent jointing as per standard practice as directed during execution.

160mm dia pipe double Socket

Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated

Flooring with granite slabs set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the slabs against supply) -do- Telephone Black Granite 18-20 mm thick upto 2.43 M

Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same

Supplying and fixing in position wall mirror 5 mm thick glass (Saint Gobion) with Teak wood beading alound and 6 mm plywood IS 303 bwr (both sides commercial) back in position including cost and conveyance of all materials etc., complete.

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P.,F.O.R. destination including, loading, unloading & stacking at site but excluding central excise duty, sales tax, octroi and other Govt levies etc., as applicable.M.D.-10with 560mmdia clear opening(New item) I.S.I Mark

HD-10 560mm dia

Supply of the following Anodized Aluminum Fixtures for Doors and windows

Anodized Aluminum Tower Bolts 10mm dia X 150 mm Long with ISI Mark IS:204 of shakthi maKe.

Supply & fixing of Anodized Alluminium Aldrop (IS 2681) 16 mm rod and 200 mm long shakti make

Anodized Aluminium Door Handles (IS:208) 12 mm rod with 150 mm long 3 mm plate of Sakthi make.

Rupees Seventeen Lakhs Six thousand Three hundred sixty seven and paise Seventy one only