ADDN/ALTN OF BUILDING NO OM-05 IN BINNAGURI MILITARY STATION UNDER GE (NORTH) BINNAGURI

Amount

Surface dressing n.exc 15 cm deep and getting out soft loose soil complete all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.50m depth for foundation shafts, walls, main holes for taking up/laying under ground electric cable not exc 10 sqmm on plan etc and getting out in soft/loose soil complete all as specified and as directed.

Excavating over areas, n.exc 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M&L for plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 Type B-0 using 12.50 mm graded stone aggregate as in Damp proof course to horizontal or vertical surface including necessary form work complete all as specified and as directed.

Material & Labour applying evenly a coat of blown type bitumen 85/25 @ 1.50 Kg per Sqm and blinding with clean dry sand @ 0.05 cum/sqm complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cracking, bending spirally for hooping for column, hooking ends and binding with including mild steel wire annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

All as per item No 08 above, but 6 to 08 mm dia complete all as specified and as directed.

All as per item No 08 above, but 5mm dia and over upto to and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for Form work to sides of concrete foundations, footings, plinth beam etc flate, rough finished surfaces of concrete complete all as specified and as directed.

M&L for Form work to sides of concrete for column pillars, square or rectangular or polygonal for rough finished surfaces of concrete complete all as specified and as directed.

M&L for Form work to sides and soffits of floor or roof beams lintels, contilevers, flat for rough finished surfaces of concrete all as specified and directed

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) flat for rough finished complete all as specified and as directed.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges flat for rough finished surfaces of concrete complete all as specified and as directed.

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

M & L for RCC M25 (Design Mix) as in foundation, footings, plinth beam bases for columns etc complete all as specified and as directed.

M&L for RCC M25 (Design Mix) as in Columns, pillars etc complete all as specified and as directed.

M&L for RCC M-25 (Design mix) as in Beams, cantilevers lintels over 1.5 mm span etc complete all as specified and as directed.

M&L for RCC M-25 (Design mix) as in chajjas complete all as specified and as directed.

M&L for RCC M25 (Design Mix) as in slab supported on walls, beam, columns in floor, roof, shelves complete all as specified and as directed.

M&L for providing RCC M25 (Design Mix) as in lintels upto 1.5m clear span, lintel bend ,cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water through and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Spreading and levelling in layers n exc. 25 cm thick with excavated soil as in plinth filling etc complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for anti-termite treatment by treating the back fill in contact with foundation at the rate of @7.5 lit of emulsion per sqm of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

M&L for anti-termite treatment by treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M&L for anti-termite treatment by treating the soil alongwith external perimeter of building @ 2.25 ltr of emulsion per meter of the perimeter wall complete all as specified and as directed.

M&L for anti-termite treatment by treating the soil under plinth protection at the rate of 5.0 ltr of emulsion per square meter of the surface area complete all as specified and as directed.

M&L for hardcore of gauge n exc .63mm, deposited, spread and levelled in layers 100 mm thick broken stone or boulders watered and rammed to a true surface complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan any radius in half brick thick built in CM (1:4) complete all as specified and as directed.

M&L for brick work with fly ash brick, straight or curved on plan exc 6 m mean radius built in CM 1:6 to complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D2 in sub base using 40mm graded aggregate complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate 25mm thick as in flooring complete all as specified and as directed.

M&L for 1st quality double charged/ultra charged Vitrified Ceramic tiles light/dark shade 7-8mm thick (square/rectangular) polished, area of each tiles not exceeding 1.0 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed CM (1:6) 15mm thick all as specified and directed by Engineer-in-charge.Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work complete all as specified and as directed.

All as per above item No 35 but as in skirting over 10mm thick cement plaster (1:4) complete all as specified and as directed.

M&L for Non Skid ceramic coloured tiles 7- 8mm thick (squares/ rectangular) area of each tile not exceeding 1.0 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed CM (1:6) 15mm thick complete all as specified and as directed.

All as per above item No 37 but as in skirting over 10mm thick cement plaster (1:4) complete all as specified and as directed.

M&L for DIGITAL ELEVATION TILES of size 300x600x7-8mm thick on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendenring in CM 1:4 as backing coat complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (20mm graded stone aggregate) as in coping bed plates of manholes cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets etc including necessary form work complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in roof kerbs water toughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 and finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for applying average 15 mm thick plaster in two coats (10+5mm) with readymix pre-packed dry mix mortar, blended with PP fibres, mixed with liquid water proofing compound @200ml per bag of cement or manufacture's instructions on top layer of fair faces of brick wall or concrete surfaces additives on extarnal surfaces including transporting of material, mixing, curing, scaffolding etc finished the surface even and fair without using extra cement complete all as specified and as directed. Notes : (a) Liquid water proofing compound will be measured and paid separately as supply only. (b) Water proofing compound will be measured and paid separetly.

M&L for rendering 5mm thick on ceiling surfaces in cement plaster 1:3 and finished even and fair (without using extra cement) complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for rendering 10 mm thick screed bed on roof slab concrete surfaces in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions (WPC shall be measured and paid separately) complete all as specified and as directed.

M&L for providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating in 4 coats of application (a) applying primer coat with Primer @ 0.3 kg /sqm (b) over priming coat applying as specified below or manufacturer instructions with fibre reinforcement a width of approx 1m @ 0.75kg/sqm on the flat or vertical surfaces over parapetwall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Applying second coat of roof guard @0.75Kg/sqm (d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly. Note : Water Proffing treatment shall be carried out by authorised applicator approved by the manufacturer.

M & L for 15 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounding the exposed surfaces of granite complete all as specified and as directed.

M&L for providing edge moulding to Granite stone any description of any places including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

M&L for granules textured homogeneous wall finishing system consisting of a two component system of dry granules (25 Kgs pack) made of 92% silica particles coated with fade resistant pigments, 100% acrylic polymer bonding agent (5 Kgs pack) with the applied thickness of the coating being between 0.8 mm - 1.2 mm to be applied on cured, smooth level plastered surface, as per manufacturer's directions, applied by approved applicator of the manufacturer as per the directions / supervision of the Engineer-In-Charge, all complete. The above textured coating should conform to surface spread of flame class one of BS 476 : Part 7 : 1971 and pull off strength of the coating to meet JISA 6909 all as specified and as manufacturers specifications / instructions.

M&L for waterproof cement based putty of one coat and sand papering surcaces to achieve smooth surfaces over new plastered surface on wall / ceiling / chajjas after preparation of surface and applying two coats of distemper acrylic emulsion of approved tint over a coat of alkaline resistant primer with roller including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M&L for preparation of new plastered surfaces on wall / ceiling / chajjas and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priiming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surfaces as per the manufacturer instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application with flow speed of minimum 1 Ltr per minute having pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.

S&F for GI frame work for seamless ceiling comprising of FI perimeter channel 0.55 mm thick with two unequal flange of 20 and 30 mm dia and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx 900 mm centre to centre with FI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mm length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including for providing and fixing gypsum board 12mm thick in ceiling fixed with screws as per manfacture's instructions fixed or laid/inserted to timber/GI/Aluminium frame work 4mm thick with screws complete all as specified and as directed. Note: Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

S&F for Gypsum Board 12 mm thick cornices up to 100 mm wide along the false ceiling on vertical surfaces fixed with cadmium plated screw complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M&L for Melamine polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats etc complete all as specified and as directed.

S&F of factory made 40mm flush shutter,machine pressed architects veneer designer ply lam both side flush door shutter solid core construction with block board core incl 5mm thick leakwoood lipping alround complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L for framed work such as grills, gratings, for fly proof door shutter etc. with ends of bars, hollow sections shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, notching for wire, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, welding etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F in repair vitreous china wash basin Table top, white oval /Square shape including waste chain and plug and porcelain stopper but including brackets, waste pipe & CP waste coupling, PVC connection 450 mm long complete all as specified and as directed. Make: CERA Cat part No. S-2020160 or of techno commercially equivalent make as listed in List of Makes as approved by the GE.

Supply and fixed for central hole basin mixer , cast copper alloy with capstan head , chromium plated screwed down, high pressure with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed. Make :- CERA Cat part No. F-1012451 or of techno commercially equivalent make as listed in List of Makes as approved by the GE.

Supply and fixed in repairs white vitreous china wash down water closet pan wall hung type including concealed flushing cistern (size of cistern 460*450*8mm) of size 545 x 345 x 360 mm with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat cover (soft landing) and mild steel chromium plated or aluminised hinging device,including making all necessary fittings and connections complete all as specified and as directed. Make: Cera Cat Part No S1043136 or of techno commercially equivalent make as listed in List of Makes as approved by the GE.

Supply & fixed in repair, Vitreous china bowl urinal, size of 360 x 330 x 740 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. Make: Cera CALCIA EFS Cat No. S4010101 or techno commercially equivalent make as listed in List of Makes as approved by the GE.

M&L for 75 mm PVC (SWR) floor trap, plain including jointing with solvent cement complete all as specified and as directed.

S & F stainles steel (AISI-304 grade) square grating with frame of size 150 x 150 mm complete all as specified and as directed.

S & F for stainless steel (304 grade) drain grating with frame of size 600x150mm complete all as specified and as directed.

Supply Towel Ring Round chromium plated, including all necessary fittings, connections etc. complete all as specified and as directed. Make: Jaquar Cat Part No AQN-7721 or techno commercially equivalent make as listed in List of Makes as approved by the GE.

Supply Toilet Paper Holder chromium plated, including all necessary fittings, connections etc. complete all as specified and as directed. Make : Jaquar Cat Part No ACN 1151N or techno commercially equivalent make as listed in List of Makes as approved by the GE.

Supply Soap Holder chromium plated, including making all necessary fittings, connections etc complete all as specified and as directed. Make : Jaquar Cat Part No ACN 1135N or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S&F 15 mm bore fancy type angular cock cast copper alloy screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: Cera Cat part No.F-1015201 or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S&F PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F CP health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook in cluding making connections and fixed in position complete all as specified and directed. Make: Cera Cat no. F-8030104AB or techno commercially equivalent make as listed in List of Makes as approved by the GE.

Supply and fixing for brass chromium plated fancy type towel rail 600 mm long complete all as specified and directed. Make: Cera Cat no. F-5003103 or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S&F in repair 15 mm bore fancy type bib taps long body (two in one) cast copper alloy 15 mm bore single handle and wall flange with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make:- CERA Cat part No. F-1015163 or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S & F 500 ltrs rotational moulded polyethelene water storage tanks triple layer (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc complete all as specified and as directed.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed.

S&F 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 110mm dia PVC bends of any radius acess door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laying in floors etc, complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends of any radius,complete all as specified & directed complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) Vent cowl with access door complete all as specified and as directed.

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as specified and as directed.

M & L for providing & fixing factory made solid PVC cup board frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5 mm thick PVC sheet of density 600Kg/cbm having pattam width of 50mm and thickness of 10mm. All three frame length reinforced with 19mm x 19mm MS square tube of 19 gauge. mitre cut at two corners and joined with two nos of 150mm long brackets of 15X15mm MS square tube or joint by fusion hit welding. The door frame shall be fixed to the wall thickness using 8Xthroughout the frame and metre cut at two corners and jointed with 2 nos of 150mm long brackets of 15mm x 15mm MS square tubes.The door frame shall be fixed to the wall using 8/100mm long MS screws through the frame by using PVC fasteners. A minimum 4 nos of screws to be provided for each vertical member and minimum 2 nos of screws to be provided to the horizontal mmember etc. complete all as specified and as directed.

M & L for providing & fixing factory made solid PVC cup board shutter (Flush type) of 24 mm thick made from co-extruded 3 layer regid PVC foam sheet (single extruded) with density not less than 600kg/cbm outer layer (.8-1mm) thick should be of rigid PVC with density of not less than 1400kg/cbm manufactured byan ISO 9001-2015 certfied company. Door should be water proof, turmite proof, fire retardant and having good screw holding capacity complete all as specified and as directed.

S&F of stainless Steel butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.

S&F 150 mm long Stainless steel tower bolts and fixed complete all as specified and as directed.

S&F Stainless steel fabricated type handle 250mm long complete all as specified and as directed.

S&F Stainless steel sliding door bolt 300mm long with hasp & staple (bolt type) and fixing clips of SS sheet castand fixing bolts and sliding bolts of extruded section complete all as specified and as directed.

Supply and Fix 7.5mm thick aluminum grill of specification having aperture length wise 80mm and width wise 66mm with F channel section complete all as specified and as directed.

Supply and Fix sheet glass 4.0mm thick and glazing with oil putty or with spring clips in metal surrounds or with beads fixed with metal panel pins or brass screws in squares complete all as specified exc 0.5sqm each pane complete all as specified and as directed.

S&F stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

Supply and fixing Factory made single UPVC white colour Three track panels sliding window with fly proof S.S wire mesh (Two Nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series ) frame 116x45 mm & sash 46x62mm both having wall thickness of 2.3mm + 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm ) comprising of UPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1,60+0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile zinc alloy (white powder coated) touch locks with hook , zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), GI fasteners 100x8mm size for fixing frame to finished wall and necesarry stainless screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of after fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality , complete all as specified and directed by Engineer-In-Charge. (Glass or wiremesh shall be paid separately) Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e, in depth & width of profile shall be accepted but no extra payment on this account shall be made.

Supply and Fix powder coated (minimum thickness of powder coating not less than 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating not less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised alumnium snap beading, screws etc. complete all as specified including Tower bolts, door stopper and hydrolic door closure and one No Mortice lock complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating not less than 50 micron)Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and as directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 as in fixing of holdfast cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets etc complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed.

M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame complete all as specified and as directed.

S&F of rolled mild steel tubular sections (square rectangular or circular hollow sections)as in Column,roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section ,Tube etc), including distance pieces, cleats etc. confirming to Fe - 410- W including cutting, welding & necessary fittings such as nut bolt, plate etc. complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coats of red oxide primer complete all as specified and as directed.

S&F 2mm thick fiber glass reinfoeced translucent corrugated sheet with two corrugation side lap fixed with J type screw and washers in roof wall / covering/cladding to wall complete all as specified and as directed.

S&F 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L for 1mm Decorative froasted film for door and windows, complete all as specified and as directed. Note:- Design and pattern/colour shall be approved by Engr-in-charge /GE at the time of execution of work complete all as specified and as directed.

M&L for stainless steel door fittings Patch set Dorma XLC 4001 or techno commercially equivelant makes as listed in List of Makes as approved by the GE, Top set-01 Nos , Bottom patch- 01 Nos ,Top pivot- 01 Nos, Lock patch-1 Nos & including 100 kg double action floor spring,complete all as specified and as directed.complete all as specified and as directed.

M&L for Stainless steel H type pull handle 400x22mm size complete all as specified and as directed. Make- Dorma Xlc3000A or Techno equivelant .

S&F for stainless steel (Grade 304) railing/tubular posts made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the tubes with toughned glass etc including necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab etc with suitable arrangement complete as per direction and approval of GE complete all as specified and as directed. Note: Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L for mild steel work as in collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc. specified , erected in position and securing runners with holdfasts and brackets complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L for preparation of old decorated surfaces of walls , chajja, facia, roof projection etc by washing, rubbing down and stopping and applying one coat of exterior emulsion paint 100% acrylic, white or tinted on old painted surfaces of walls including cleaning glass, joinery electrical fittings, wiring etc; of drops and splashes complete all as specified and as directed.

M & L for preparation of old surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade with roller including wall putty / white cement whereever required to fill the wall cracks/holes complete all as specified and as directed.

All as per item No 116 above but on ceiling surfaces complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished fair and even without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

Dismantling floor, hearth or wall tilling including cement mortar being (but not backing), and rubbish throw off the premises complete all as specified and as directed.

Taking down chowkat or frame exc 1.5 sqm but n.exc 4 sqm with shutters (without taking taking off shutters from the frame) complete all as specified and as directed.

Supply & Fixing powder coated (minimum thickness of powder coating not less than 50 micron) anodised aluminium frame (sections weighting not less than 1.40 kg/mtr) made of Square/tubular Aluminium section for door with one or more rebates jointing cleat for fixing etc and provision of aluminium door shutter (Single/Double shutter) including necessary jointing cleats glazing clips, rubber gasket aluminium anodised snap beading, screws, hold fast, Aluminium hinges 3Nos 100mm long for each shutter, floor stopper, locking arrangements handle 5.5mm thick tinted glass fixed in panels with aluminium guard bar complete all as specified and as directed.

Demolition of brick work built in cement mortar and removing from site complete all as specified and as directed.

M & L for providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings and set in cement mortar 1:4 and demolition of old jallies complete all as specified and as directed.

M&L for preparation of new surfaces of wall surfaces and applying two coats of cement based paint complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggragate) as in foudnation filling and mass concrete complete all as specified and as directed.

S&F rolled mild steel work in tubular trusses MS pipes in vertical column including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161 of 1979 grade st 240 with one shop coat complete all as specified and as directed.

S&F in repair of 4mm thick 'E' classic designer board false ceiling with powder coated GI snap grid frame work of grid size 600 x 600 mm complete all as specified and directed including all necessary drilling and necessary arrangement to fix items as under :- (a) 27x27x0.55 mm thick GI angle powder coated duly plugged @ 600mm centre to centre alongwith perimeter of wall. (b) 25x25x0.55 mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders (n.exe 1.2 mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/wooden truss/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick AC "E" Classic designer board of approved texture and finished complete. Note: The complete ceiling work shall be done as per manufactures instruction and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil complete all as specified and as directed.

Material and labour for 80 mm thick coloured rubber moulded machine pressed precast conctete interlocking paver block chemically treated any shape, size and colour confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment over and including 50 mm thick sand cushion spread and laid levelled in layers complete all as specified and as directed.

M&L cement concrete type C1 1:3:6 (using 20 mm graded stone aggregate) 75mm thick as sub base complete all as specified and as directed.

M&L for providing and laying of 10mm thick anti-skid pavement tiles of area of each tile n.exc 0.18 Sqm of color & shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L for rendering 15mm thick in cement mortar (1:4) intenally on brick surfaces, mixed with WPC (as per manufactures instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately under respective item of this schedule.

M&L for rendering 15mm thick in cement mortar (1:6) extremely on brick surfaces finished even and fair (upto 15cm below the ground level) complete all as specified and as directed.

M&L for RCC type B1 1:2:4 cement concrete (20mm graded stone aggregated) Pre cast cover slabes for main holes etc set in cm 1:4, including necessary form work etc complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C2 (using 40mm graded stone aggragate) as in bed to 150mm dia drain pipe including packing under and huauching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for reinforced cement concrete drain pipes NP2 one collar per length drain pipe 150mm dia laid in ternches, jointed and tested complete all as specified and as directed.

M&L for cutting into exiting main hole for connecting new drain, making good to pipe rendering, cutting out existing benching for and forming branch channel (1/2 round are 3/4 section) in cement concrete (1:2:4) type B1 smooth finished , and reforming bencing as required for 200mm dia complete all as specified and as directed.

ELETRIFICATION M&L for point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LS (ISI markd) with proper colour coding as earth continuity conductor connected to common earth dolly , modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. all as specified and as directed for the following :-

One light point controlled by one way switch 5/6 amps complete all as specified and as directed.

One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps complete all as specified and as directed.

One socket out let 5/6 amps point on the same board complete all as specified and as directed.

One socket out let 5/6 amps point on the independent board complete all as specified and as directed.

All as per item No 138 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and as directed.

M&L for point wiring complete for one power point for one metal plug & socket for AC or one socket for geyser point on independent board with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for Metal Plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F of Modular bell push, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed.

S & F call bell Ding dong, 230 Volt single phase complete all as specified and as directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed.

S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F IP 20, class I, LED light 1X20 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up complete all as specified and as directed. Make : Havells, Cat Part No - EDURALINEARNEOBS20WLED865SPCWH or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S&F of Decorative wall light fixture made up of polycarbonate suitable for 15 Watt LED retrofit of type B-22 base, IP66 grade, with and including 15 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting complete all as specified and as directed. Make : Havells, CAT No - LHFOECE1TZ1B014 or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S & F Recess round shape LED ceiling light 12 Watt fitting (6'' outer dia) for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection complete all as specified and as directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and as directed.

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic consealed conduit complete all as specified and as directed. Note: Two runs of submain wiring cable alongwith one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.

S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised iron strip25 x 4 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, includig necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on completion all as directed and as specified.

Supply & fix Ceiling fans with all accessories 230 V,1200 mm sweep BEE 5 star rated, conforming to IS 374:1979 complete with pre wired with 3 core cable completion all as directed and as specified.

S&F wall fan 400 mm sweep, energy efficient, AC single phase 240 volts, 50Hz,, Ai and connecting up complete with provision of 3 core flexible multistranded copper conductor of size 0.75 Sqmm from ceiling rose to fan complete all as specified and as directed.

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

Supply and laying sub class B bricks of old size for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 2 core complete all as per specified and directed.

M & L for horizontal boring across the existing road without disturbing the road surface for inserting GI pipe complete all as specified and as directed. Notes : (a) Removal of surplus soil shall be deemed to be include in the unit Rate. (b) GI pipe will be measured and paid separately under relevant item of Sch 'A'.

M&L for 50 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.

Supply and lay pipe galvanized, “Medium grade”, including fittings 20 mm fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Supply and lay pipe galvanized, “Medium grade”, including fittings 25 mm bore complete to walls and ceiling or laid in floor complete all as specified and as directed.

Supply and fix gun metal, globe or gate valves with iron wheel head of 20 mm dia bore complete with all accessories complete all as specified and as directed.

Supply and fix gun metal, globe or gate valves with iron wheel head of 25 mm dia bore complete with all accessories complete all as specified and as directed.

MESSRS SEN BROTHERS (BID ID -3113157)

SINGH & CO (BID ID -3112610)

M/S MOHAN KUMAR BANSAL (BID ID -3113167)

M/S East India Traders (BID ID -3113067)

M/S VIRENDRA KUMAR SINGH (BID ID -3113134)

SHRI R S YADAV (BID ID -3111335)

SS SHARMA (BID ID -3111959)

M/S NIKITA ENGINEERING CO (BID ID -3112018)