DRIP

Amount

APPENDIX I – CIVIL WORKS

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth as directed by the Engineer in charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed by the Engineer in Charge

Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand(zone-III) : 8 graded stone aggregate 40 mm nominal size) with cement content of 170kg/m3 excluding the cost of centering and shuttering - All work up to plinth level.

Random rubble masonry with Cement Mortar 1:6 with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. complete as per the directions of Engineer in charge.

Cement solid/hollow block work with 40x20x20 cm blocks in cement mortar 1:5 for foundation and basement including cost of all materials, conveyance, labour charges, etc. complete as per specifications and as directed by the Engineer in charge.

Providing and laying in position Reinforced cement concrete 1:1.5:3 ( 1cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) with cement content of 400kg/m3 excluding the cost of centering, shuttering and reinforcment-all work up to plinth level.

Providing and laying Reinforced cement concrete work 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) with cement content of 400kg /m3 in beams, suspended floors, roofs, lintels, sunshades etc. above plinth level excluding the cost of centering, shuttering and reinforcement.

Centering and shuttering including strutting, propping etc. and removal of form work for. Lintels, beams, plinth beams and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering including strutting, propping etc. and removal of form work for edges of slabs and breaks in floors and walls.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete as per the directions of the Engineer in charge.

Providing wood work (Second class teak wood) in frames of doors, windows and ventilators wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener will be paid separately) etc. complete as per the directions of Engineer in charge.

Providing and fixing Second class teak wood panelled or panelled and glazed shutters( 35 mm) for doors, windows and ventilators, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid separately, all complete as per the direction of Engineer in- charge.including all fittings such as hinges hookes and eyes etc.

Providing and fixing Second class teak wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows andventilators (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) 16 mm thick panelling for panelled shutters 35 mm thick:

Providing and fixing panelling and glazing in panelled and glazed shutters for windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). 4 mm thick glass pane for panelled and glazed shutters 25 mm to 40 mm thick

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-charge.

25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. An M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places.Including all fittings and locks

Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

12mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement at the underside of roof and sunshade etc.complete

12 mm cement plaster of mix.1:4 (1 cement : 4 coarse sand) for outside and inside walls.

12 mm cement plaster 1:4 (1 cement : 4 coarse sand).finished with a floating coat of neat cement for top of roof slab

Providing and laying cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 100 mm thick with 20 mm nominal size stone aggregate with cement content of 320kg/m3 for flooring as per the directions of the Engineer in charge.

Providing and laying Vitrified floor tiles of minimum size 60cm x60 cm conforming to I.S. 15622, of approved make, in all colours & shades for flooring and skirting over a bed of cement mortar 1:4 (1 cement: 4 coarse sand) 20mm thick including grouting the joint with white cement & matching pigments etc. complete as per the direction of Engineer in charge.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete as per the direction of Engineer in charge.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in­Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per the direction of Engineer in charge.

Applying one coat of water thinnable cement primer ofapproved brand and manufacture on interior wall surface and ceiling as per the direction of Engineer in charge.

Finishing walls with Acrylic Smooth exterior paint of required shade on new work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).

Wall painting 2 or more coats with acrylic emulsion paint of approved brand and manufacture to give an even shade to the interior walls.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade including one coat primer as per the direction of Engineer in charge.

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Supplying , conveying and erection of ready made septic tank suitable for 15 users including earth work excavation etc complete as per the direction of Engineer in charge.

APPENDIX II - WATER SUPPLY & SANITARY ARRANGEMENTS

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge.-25 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work, including cutting chases and making good the wall etc.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

Providing and fixing brass stop cock of approved quality:

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS:8931. 15 mm nominal bore

Providing and fixing coloured vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level coloured P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:including health fouset

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required as directed by the Engineer in charge.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:

Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete.

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing 110mm PVC pipe with all PVC plain threaded fittings including jointing of pipes & fittings with one step PVC solvent cement, trenching, refilling & testing of joints etc.complete as per direction of Engineer in charge.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

APPENDIX III - ELECTRICAL WORK

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box etc.complete (Group A)

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing metal box of 100mmx100mmx60mm on surface or in recess with suitable size of phenilic laminated sheet cover in front including painting etc as required .

Supplying and fixing SP15/16 amp piano type one way switch for power plug on the existing switch box/ cover including connections etc as required.

Supply and fitting of SP 5/6 amp piano type one way switch for ordinary plug.

Supply and fitting of 3pin 5/6 amp, piano type socket outlet

Supply and fitting of 6 pin 15/16 amp, piano type socket outlet

Supplying and fixing Telephone outlet socket

Supplying and fixing Bell bush

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Installation, testing and commissioning of pre wired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc. including supplying and fixing ball and socket arrangement, 2 nos. down rods of 20mm diax1.6mm thick steel conduit up to 30cm length, painting and wiring the down rods and connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc.as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing 2+4 way/6 way double door prewired SP&N MCB distribution board of sheet steel, 240 volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 25amps, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and drawing 1 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and providing 48" Ceiling fan of approved make and colour.

M V Balakrishnan

George P O

SHINE T JOSEPH (ABEL CONSTRUCTIONS)