Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.8 LAccepted-AOC | L1 | Accepted-AOC award issued being L1 | |
| 2 | L2₹53.9 L+₹6.8 L (14.4%)Rejected-Finance C O DEVNAR ENTERPRISES NERCHOWK DISTRICT MANDI H P | UNA | HIMACHAL PRADESH | 174301 | L2 | Rejected-Finance REJECTED BEING L2 CONTR. | |
| 3 | L3₹54.2 L+₹7.1 L (15.1%)Rejected-Finance | L3 | Rejected-Finance REJECTED BEING L3 CONTR. | |
| 4 | Rejected-Technical VILLAGE DINAK P O KANAID TEHSIL SUNDERNAGAR | BILASPUR | HIMACHAL PRADESH | 174001 | - | Rejected-Technical BID nonresponsive and DISQUALIFIED | |
| 5 | Rejected-Technical | - | Rejected-Technical bid non responsive and disqualified |
Tender Value
₹46.3 L
EMD Value
₹76,900
Closing Date
29 Sept 2022, 6:00 pmClosed
Executive Engineer, Electrical Division, HP.PWD Ma
Executive Engineer, Electrical Division, HP.PWD Mandi
Construction of Combined office building at Karsog Distt Mandi H.P SH Providing E.I. there in
2022_PWD_65390_1
PW/MED/TA/NIT/ e-notice/22-23-5130-40 dt 15.09.22
Open Tender
Electrical Works
Item Rate
365 days
KARSOG
PLZ REFER TO BID DOC
11 documents required · 11 mandatory
₹2,000
Executive Engineer, Electrical Division, HP.PWD Ma
₹76,900
Yes
30 Jul 2024
23 Sept 2022
30 Sept 2022
23 Sept 2022
29 Sept 2022
23 Sept 2022
Amount
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required..complete in all respect as per entire satisfaction of engineer in charge.i) Group C. Make:- PLAZA / FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI./L&T
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required complete in all respect as per entire satisfaction of engineer in charge. Make:- ESS ESS KAY/COSMO/Anchor/L&T.
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required complete in all respect as per entire satisfaction of engineer in charge. Make:- ESS ESS KAY/COSMO/Anchor/L&T.
Supplying and fixing G.I. Modular box of (205mmx135mmx50mm) size with modular plate and cover in recess including providing and fixing 3 No 5/6 amps modular socket outlet and 3 No 5/6 amps, modular switch, connections etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make : Legrand (Myriu) / L&T ( Entice) / Anchor /SSK / ABB (Similar Class).
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make : Usha / Bajaj / Anchor Panasonic.
Ceiling fan 1200 mm sweep (Category -A )
Ceiling fan 1200 mm sweep (Category -A )
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. i) Exhaust Fan, Light duty, (Domestic) 300 mm sweep Make: Bajaj , Usha, Anchor
Providing and fixing 24 watt Ultra slim LED Panel made from extruded aluminium hosing frame die cast housing frame LED Surface / recess / pendant 1"x1" approx.complete with Connection,testing commissioning as required complete in all respect as per entire satisfaction of the Engineer in charge. Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Lux Max .
Providing and fixing LED Surface mounted 2"x2" 36 watt Square pannel with aluminium die cast housing of superior quality complete with Connection,testing commissioning as required complete in all respect as per entire satisfaction of the Engineer in charge. Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Lux Max .
Providing and fixing LED Tube 20 watt , PC Batten complete with Connection,testing commissioning as required complete in all respect as per entire satisfaction of the Engineer in charge. Make : Wipro / Bajaj / Phillips / Jaquar / Twinkle / Lux Max .
Supplying and fixing bakelite batten/angle holder including connections etc. as required complete in all respect. Make: Anchor , CONA , ESS ESS KAY .
Supplying and Fixing LED Street Light 25 Watt LED made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC Cover having TOP OPENING separate driver compartment with IP 66 protection and impact resistance of IK 07 luminair complete with connection testing commissioning etc as required complete in all respect. Make :- Wipro / Jaquare / Bajaj.
Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required complete in all respect. i) 40 mm dia. G.I. pipe, heavy class
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required complete in all respect. Make: ANCHOR , CONA , ESS ESS KAY .
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete in all respect. i) Single pole. Cat-A. Make : L&T / Legrand / Siemens.
Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete in all respect. i) Double pole Cat-A Make : L&T / Legrand / Siemens..
Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect Make : L&T / Legrand / Siemens.
40 Amps. Cat-A.
63 Amps. Cat-A.
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respect. Make L&T / LEGRAND / SIEMENS.
Double door-4 way
Double door-8 way
Double door-12 way
Double door-16 way
Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required complete in all respect. Make : L&T / Legrand / ABB / SIEMENS.
32 Amp. Category-A
63 Amp. Category-A
Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required complete in all respect. Make : L&T / Schneider / ABB / Legrand.
Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- 1200mmx1000 mm x450MM Deep Consisting MCCB 315/400 Amps- 1 No copper Busbar 400Amps- 0.7 Metre, 1 No Ammeter ,Voltmeter,Indicating Lamp3 No ,C.T Coil Coplete Connection Testing etc as required complete in all respect. Make : L&T / Schneider / ABB / Legrand. Annexure-A
Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- 1200mmx1000 mm x450MM Deep Consisting MCCB 315/400 Amps- 1 No copper Busbar 400Amps- 0.7 Metre, 1 No Ammeter ,Voltmeter,Indicating Lamp3 No ,C.T Coil Coplete Connection Testing etc as required complete in all respect. Make : L&T / Schneider / ABB / Legrand. Annexure-B
Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- 1200mmx1000 mm x450MM Deep Consisting MCCB 315/400 Amps- 1 No copper Busbar 400Amps- 0.7 Metre, 1 No Ammeter ,Voltmeter,Indicating Lamp3 No ,C.T Coil Coplete Connection Testing etc as required complete in all respect. Make : L&T / Schneider / ABB / Legrand. Annexure-C
Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required complete in all respect as per entire satisfaction of Engineer- in- Charge.
Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required complete in all respect as per entire satisfaction of Engineer- in- Charge.
Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge.
Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required complete in all respect.
Fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper/G.I. tube, having single prong at top, complete as required complete in all respect.
Riveting, sweating and soldering of copper/ G.I. tape ( with another copper/G.I. tape, base of the finial or any other metallic object) as required complete in all respect.
Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required complete in all respect. ( for vertical run)
Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required complete in all respect. ( for horizontal run)
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect as per entire satisfaction of Engineer- in- Charge. PLAZA / FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI cable make.
Supplying and drawing 3x1.5 Sq. mm. of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required complete in all respect as per entire satisfaction of Engineer- in- Charge. PLAZA / FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI cable make.
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect as per entire satisfaction of Engineer- in- Charge. PLAZA / FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI cable make.
Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect. PLAZA / FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI cable make.
Wiring for circuit/sub-main with 2x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respect as per entire satisfaction of Engineer- in- Charge. PLAZA / FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI cable make.
Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect. PLAZA / FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI cable make.
Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering complete in all respect as per entire satisfaction of Engineer- in- Charge. Cable Make : CCI/ Universal/ Finolex / Polycab / Rallison / Grandlay / KEI.
Armoured cable 35 sq. mm (3.5 core)
Armoured cable 300 sq. mm (3.5 core)
Supplying and fixing of 25 mm. dia of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make : AKG/ BEC / NIC/ Diplast.
Supplying and laying 65 mm dia. G.I. pipe heavy class 1 Metre Deep in ground as required complete in all respect.
Supplying and fixing 01 RJ-45 single for Cat-6 cable including connections, etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge.
Supplying and laying of Cat-6 cable of approved make as required complete in all respect and as directed by the Engineer in charge.
Supplying and drawing 2 Pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required complete in all respect.
Supplying and fixing Telephone socket outlet, Modular.in the existing switch box / cover plate including connections etc. as required.complete in all respect. Make : Legrand (Myriu) / L&T ( Entice) / Anchor /SSK / ABB (Similar Class).
Rohtash Verma
SUNIL KAPOOR
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .