Construction of ABC Center (Animal Birth Control) under Jeypore Municipality.

Building

Excavation of foundation trenches in all kind of soil incuding cost of all shuttering and shoring in all sides, dewatering the |trenches, if required, dressing the sides and leveling the bed up Up to 1.5m depth

2nd Depth

Supplying, and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T and P

Plain Cement concrete (1:4:8) in foundation and floors using 4cm(1 1/2") size hard crusher broken granite stone metal of approved quality and from approved quary including lowering,

R.C.C work in ground floor of M-25 grade with 20mm and down grade crusher broken hard Granite chips including hoisting and laying with cost of all labour, materials with all taxes, lead ,T and P etc all complete Ground Floor FOOTING IN FOUNDATION

COLUMN IN SUPERSTRUCTURE

PLINTH BAND

LINTEL

CHAJJA

ROOF BEAM (GROUND FLOOR)

ROOF SLAB (GROUND FLOOR)

STAIRCASE

FIRST Floor Column

Lintel

Roof Beam

Roof slab

Cutting, Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or jointing if necessary bending, binding.tying the grills as required for R.C.C Ground Floor

First Floor

Rigid smooth centring and shuttering for R.C.C. works including false work and dismanting then after casting including cost of materials all complete. Ground Floor FOOTING IN FOUNDATION

COLUMN IN SUPERSTRUCTURE

PLINTH BAND

LINTEL

ROOF BEAM (GROUND FLOOR)

ROOF SLAB (GROUND FLOOR)

1st Floor COLUMN IN SUPERSTRUCTURE

LINTEL

CHAJJA

ROOF BEAM

Roof slab

Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance plus 2 percent. percent in cement mortar (1:3) in foundation

Providing Fly Ash brick masonry work in Super Structure with fly ash bricks 25cm x12 cm x8 cm tolerance of plus 2 percent size bricks having crushing strength not less than 75 kg/cm2 with Ground Floor

First Floor

Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of Roof Slab, Stairs, Chajas, shelves, lofts, beam soffit sides and other R.C.C. surfaces including deep close chipping, Ground Floor

First Floor

Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6)) with cement and screened and washed sharp sand for mortar and finished smooth to the rough Ground Floor

First Floor

Providing 16 mm. thick cement plaster in all fioors at all height with cement mortar of mix (1:6) with cement and screened and washed sharp sand for mortar and finished smooth to the rough Ground Floor

First Floor

Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilabours and beams etc complete

32mtmh ick piasal. wood or local teak wood fully glazedshütters complete with iron fitting and wooden hinged cleats etc., fitted sand fixed in position including all labour, but excluding the-cost

Providing and fixing M.S. grills of required pattern in frames of windows, ventilators, rolling shutters etc. With M.S. flats, square or round bars etc complete. Details of cost for a grill

Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging Ground Floor

1st Floor

Priming one coat with any approved primer including cost of all labour, materials T and P with taxes, transportation etc all lcomplete. For Plastered Surface

For Steel Work

For Wood Work

Wall painting 2 coats with Plastic Emulsion PaintWeather Coat of approved shade on newW work to give an even shade in Ground Floor.

1st Floor

Wall painting 2 coats with Weather Coat of approved shade on new work to give an even shade in Ground Floor

1st Floor

Enamel Painting two coats with any approved paint including cost of all labour, materials T and P with taxes, transportation etc all complete in Ground Floor Both Steel and Wood work

Fixing Tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles all complete with VITRIFIED TILES

Ceramic FLOOR TILE

Granite tiles for staircase

Fixing Tiles to dados skirting and risers of steps on 12mm. Thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with and without cost of VITRIFIED TILES

CERAMIC TILES

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm 0.90mtr. C/C and

Wiring to Light, Exhaust Fan, Call Bell and Celing Fan with 1.5 mm PVC insulated 1100 volt grade multi-stranded Copper Conductor Wire for Phase, Neutral And Earth Continuity Conductor and loop earth to fiting and fixture run inside 2mm thick PVC Conduit Pipe recessed in Wal Column/ Ceiling of the Building including supply of materials such as Clip-In Modular type Switches, Sockets, Modular PVC Switch Boxes, Cover, FR PVC Wire, Ceiling Rose, Angle Batten Holder, Junction Box etc. complete with making good the damages caused as required and as per Direction of Engineer-ln Charae Single Light Point controlled by One 6 Amp. Switch / First Light Point of Group Control.

Subsequent Light Point.

Ceiling Fan Point with supply and fixing of Ceiling Fan Hook made of 10 mm Steel Round Bar. (Space shall be provided for installation of Electronics type Stepped Fan Requlator).

6 Amp. Plug with 6 Amp. Switch on Same Board.

6 Amp. Plug with 6 Amp. Switch on Separate Board.

2X6 Amp. Plug on Separate Board.

Exhaust Fan Point.

2 Way Switch 6 Amp. for controlling the Point.

Supply, delivery, installation and testing of following Plug Boards including inter- connections and making good the damages caused complete as required and as per Direction of Engineer-In-Charge 6/ 16 Amp. Plug Boards consisting of a 16 Amp. Clip-in type Modular Switch with Indicator and a 6/16 Amp. Clip-in type Modular shuttered Plug Socket fixed on Metallic Concealed Box

6/16 Amp. Plug Boards consisting of a 6 / 16 Amp Clip-in type Modular shuttered Plug Socket fixed on Metallic Concealed Box.

6/ 16 Amp. Switch Boards consisting of a 16 Amp Clip-in type Modular Switch with lIndicator fixed on Metallic Concealed Box.

Supply, delivery, installation and testing of 20 Amp. Metal Clad 3 Pin Plug Socket having Phase, Neutral and Scraping Earth with Plug Top and 20 Amp. SP MCB including Metalic enclosure complete with making connections, making good the damages caused as required and as per Direction of Engineer-In-Charge.

Wiring for Circuits and Submain with following number and sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box and Pull Box etc. complete with making good the damages caused as required and as per Direction lof Engineer-in-Charae. 2 Nos. Single Core 2.5 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD.

2 Nos. Single Core 4.0 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD.

2 Nos. Single Core 6.0 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 4.0 mm2 Copper Wire for Earth Continuity Conductor as per SLD.

4 Nos. Single Core 6.0 mm2 Copper Wire for Phase and Neutral and 2 Nos. Single Core 4.0 mm2 Copper Wire for Earth Continuity Conductor as per SLD.

4 Nos. Single Core 10.0 mm2 Copper Wire for Phase and Neutral sand 2 Nos. Single Core 6.0 mm2 Copper Wire for Earth Continuity Conductor as per SL.D.

Supply, delivery, installation and testing of Telephone Outlet Boards containing a Clip-in type Modular Telephone Socket with Top fixed on Gl concealed Modular Switch Board including Connections and making good the damages caused complete as required and as per Direction of Engineer-In-Charge.

Wiring to Telephone Socket Outlet from Junction Box with 0.5 mm2 Twin Pair Copper Conductor Telephone Wire run inside prelaid PVC Conduit complete including termination, testing etc complete as required and as per Direction of Engineer-In-Charge.

Supply, delivery, installation, testing and commissioning of Indoor Wall mounted type Telephone Distribution Box having following number of Junctions made out of 1.6 mm thick CR sheet steel duly premiered and painted with enamel paint having hinged front door, testing faclity having provision for cable / conduit entry complete as per Direction of Engineer-In-Charae. Junction box suitable for 20 Pair Telephone Cable Termination.

Supply, delivery, installation and testing of TV Antenna Outlet Boards containing a Modular type TV Antenna Socket fixed on Modular Concealed Box including connections and making good the damages caused complete as required and as per Direction of Engineer-In-Charae

Supply, delivery, installation and testing of TV Antenna Wires RG6 lin PVC Pipe and making good the damages caused complete as required and as per Direction of Engineer-In-Charge

Supply, delivery and laying of following sizes of 2 mm Wall thickness rigid PVC Conduit Concealed in Wal/ Column/ Roof Slab of the Building or mounted on surface along with other accessories and 18 SWG GI Fish Wire complete for Telephone / TVI Circuit or Sub main wiring as required and as per Direction of Engineer-In-Charge. 20 mm dia.

25 mm dia.

Supply, delivery, installation, testing and commissioning of L.T. Indoor Wall mounted Double Door type Distribution Boards of Original Factory made enclosures of the same Brand as the MCB conforming to the relevant ISS and as per special conditions contract making good the damages caused complete as per the Direction of Engineer-In-Charge. Light Distribution Board: (4 Way TPN DB Mettalic double door): Company made Metal Door type with P-43 Degree of Protection

Power Distribution Board: (6 Way TPN DB Mettalic double door): Company made Metal Door type with IP-43 Degree of Protec

Supply, delivery, installation and testing of folowing types of Fluorescent Tube Fixtures Directly on Wall / Ceiling of Building with all accessories such as Electronics Ballast, Lamps, Stove Enameled Box, Perplex Sheet Cover etc. complete assembly and making Connection from the suitable point outtet as per the Direction of Engineer-In-Charge. (For Common Service Areas). 1 X 28 Wat T-5 Fluorescent Tube fixtures similar to Philips Cataloque No, -TWG 207 1X TL5-28VW HF or Equivalent.

Night Lamp LED.

Angle Holder with 15 Watt LED (Angle Holders -6 Nos. and Bed Lights -18 Nos.)

Bulkhead with 15 Watt LED

2 x 28W Tube Light.

12W Round LED.

Metal Helid.

Supply, delivery, installation and testing of following Sweeps of High Speed Energy Efficient A.C. Ceiling Fan complete with Fan Blades, Down Rod, Canopies and Capacitor etc. including supply of Sundry Materials, making connection from the suitable point outlet but excluding cost of Fan Regulator complete as required and as per the Direction of Enaineer-In-Charge 1200 mm Sweep Ceiling Fan.

Supply, delivery, installation and testing of Electronic type Stepped Fan Regulator fixed on Existing Sheet Metal Switch Board including interconnecions and making good the damages caused complete as required and as per Direction of Engineer-In-Charge.

Supply, delivery, installation and testing of following Sweep and Speed Exhaust Fan on Existing Sheet Metal Switch Board including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge. 300 mm Sweep, 900 RPM.

Wall Fan

Supply of materials and installation of Pipe Earth Electrode made out of 50 mm dia class B GI. Pipe of 3.0 meter long with arrangements for Fiting/ Termination of G.l. Flat / Wire with G. I. Nut Bolts and Washers including cost of Burnt Wood Charcoal, Salt, Foreign Soil, Water Pouring arrangements Brick Masonry enclosure on top with removable RCC Cover complete with labour for excavation of Pit in all kinds of Soil and Rock as required and as per Direction of Enginee-In-Charge

Supply of materials and laying Underground / Floor / Wall including| making end termination and testing of 8 SWG G.I. Wire for Loopl Earthing of Equipment's, Switch Boards and Panels as required complete as per Direction of Engineer-In-Charge.

Supply of materials and laying on Ceiling/ Column/ Wall or Buried Under Ground including saddling and making connecion at both ends and testing with following size of Hot Dip Galvanized Iron Flats for Earth Termination and Earth nterconnection, making good the damages caused as required complete as per Direction of Engineer-In-Charge 25 mm x 6 mm as Earthing Conductor.

25 mm x5 mm GI Strip as Earthing Lead.

Supplying, Installing, Testing and Energizing MS Cubical type Panel Board made of 2 mm thick CRCA Sheet with Hinged Door duly Fabricated with required MS Angle and Channels of adequate size, duly treated and Powder Coated (shall have Hinged Door at the Front and Detachable Plates at Back if requirement and at Top Bottom for Cable / Wire Entry /Exit as per the Direction of Engineer-In-Charge and approved GA Drawing with following provisions. With Incoming: 150 Amp. TPN SFU with HRC Fuse -1 No., RYB Indicator - 1 Set, 150 amp. Eelctrolytic Copper Bus Bar - 4 Nos., PVC Heat Shrunk Sleeves coating, 200 /5 Amp. CT-3 Nos., Digital Multfunctioning Meter-1 N

With Incoming: 63 Amp. TPN SFU with HRC Fuse -1 No., RYB Indicator - 1 Set, 100 amp. Eelctrolytic Copper Bus Bar -4 Nos., PVC Heat Shrunk Sleeves coating 2Nos 40A 4P MCB 10KA, 1Nos 32A 2P MCB 10KA

Supplying and laying of XLPE Aluminum Armmored UG Cable in Existing Trenches / all with Proper Saddling. 70 mm2. 3.5 Core Cable (from Feeder Pillar to Main Panel Board).

16 mm2 4Core Cable with 2 Nos. No. 8 Copper Wire (from Common Panel to Lift DB.

6 mm2 4 Core Cable with 2 Nos. No. 12 Copper Wire (from Common Panel to LDB for DG Supply.

25 mm2 4 Core Cable (from Main Panel Board to Common Main Panel Board).

End Conenction of above Cable. 70 mm2. 3.5 Core Cable End Connection.

16 mm2 4 Core Cable End Connection.

6 mm2 4 Core Cable End Connecion.

35 mm2 4 Core Cable End Connection.

Supplying of following Materials First Aid Box

Shock Treatment Chart (Odia / Hindi & English).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 15 mm nominal outer dia pipes

20mm nominal outer dia pipes

25mm nominal outer dia pipes

32mm nominal outer dia pipes

Providing and laying in trenches UPVC-ASTM-Standard (Schedule-80 pipe of the following nominal bore and pipe fittings including testing as per specification complete. (Earth work in trenches to be measured and paid for separately) 25 mm nominal outer dia pipes

32mm nominal outer dia pipes

40mm nominal outer dia pipes

50mm nominal outer dia pipes

Providing all materials, labour, T and P for fitting and fixing of following CPVC Ball Valves(CTS Sockets) confirming to IS15778 with ISI mark as per ASTM D-2846 in all floor and fixing with the pipes after cutting the pipes to required shape and size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of |transportation scaffolding etc. all complete as per specification excluding GST and direction of Engineer-in-charge Make: ASTRAL/ SUPREME/ ASHRIVAD 25mm mm dia ball valve

32mm mm dia ball valve

40mm mm dia ball valve

50mm mm dia ball valve

Supplying all materials, labour, T and P and fitting and fixing of Cl water sluice valve butterfly valves / air valves/ non return valve of the following sizes confirming to the relevant return valve of the following sizes confirming to the relevant IS specif lication and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts and bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineerin-charge 50mm dia non return valve

Providing all materials labour, T and P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required waterpressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips land f inished smooth with cement morter (1:4) to original shape inluding cost of all materials, curing, conveyance of all materials etc. all complete excluding GST as per specificati on and direction of Engineer-in-charge

Providing all labour, T and P for cutting holes in bricks or stone masonry wall for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape incuding cost of all materials, curing, conveyance, duties etc. all complete as per specification excluding GST and direction of Engineer-incharge For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall

Providing all materials, labour, T and P for fitting and fixing white glazed vitreous china water closet (European pattern) 'P' or 'S type of approved make as per IS-2556 with ISI mark in all floor inluding supply of sutaible PVC wall plug and Brass screws etc. all complete including cost of PVC seat cover (solid) with hinges and rubber buffers including testing etc. all complete with all cost, and conveyance as per specification all complete excluding GST as per direction of Engineer-in-charge. Make :( Hindware 20011 ) European Water closet

Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with al fittings and fixtures complete.

Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.

Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecing the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.

Fixing 600mm x 450mm beveled edge mirror of superior glass mounted on Gmm lthick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification.

roviding all materials, labour, T and P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification and approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including transportation etc., testing and rectification of defects after testina complete excluding GST as per direction of Engineer-in-charge. Make: HINDWARE/ JAQUAR/ PARRYWARE. 15mm dia Two-Way Bibcock

15mm dia wall flange.

5mm dia Angle Stop cock

wall flange.

C.P. Soap Dish Holder.

Health Faucet ABS SS braided hose 1.00m with CP hook

Dome Waste coupling (Full Threaded)

15mmx50mm C.P. Extension piece

Urinal Spreader

CP grating

Chromium Plated brass or glazed porcelain Toilet paper

Chromium Plated brass towel ring

Fixing of Glass Shelf

600 mm long Towel Rail.

Pillar cock

Supplying all materials, labour, T and P, fitting and fixing uPVC SWR pipes (Type-B)(Co moulded Ring type) of approved make confirming to IS-13592/1992 with ISl marked, both below and above ground level or fixing on wall surface in all floors including transportation and scaffolding etc. all complete as per specification excluding GST and direction of the Engineer-in-charge. Make: ASTRAL/ SUPREME/ ASHRIVAD

Supplying all materials, labour, T and P, fitting and fixing of following dia uPVC SWR (Co-moulded Ring type) fittings of approved make confirming to IS-14735 with ISI marked in all floor with transportation and requisite testing as per 1.00 specification excluding GST and direction of EIC . make: ASTRAL/ASHIRVAD/AJAY/ SUPREME, 110mm x110mm P-Trap

110mmx87.5° Plane bend

110mmx87.5° door bend

110mmx45° Plane Bend

110mm dia single Y withoutdoor

110mm WC connector/Bend with lip ring

110mm Socket plug

2000 Litres Capaciy for drinking Polyethylene moulded water storage tank with lid and locking arrangement as per IS12701/1996 with ISI mark (3layer white rotational moulded cylinderical vertical water storage tank)