REPAIR AND MAINTENANCE DRILL OFICE CHETWODE BLDG QM SEC ACCOUNT SEC AND NEAR BY LOCATION IN NORTH COMPLESX UNDER AGE BR II AT IMA DEHRADUN

Amount

M & L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks including demolation of old brick work complete all as specified and directed.

S&F in repair GI tubing 15 mm bore, medium grade with all fitting and fixed complete to wall ceiling or laid in floor complete all as specified.

All as per Ser No 2 above but 20 mm bore of pipe

Taking down chowkats or frames with shutters (without taking off shutter from frame) area n.exc 1.5 Sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frame) area exceeding 1.5 Sqm but n exc 4.00 Sqm complete all as specified and directed.

Taking down shutter of any description exe.1 sqm & nexe 2 Sqm each and removing from site.

All as per item No. 06 above but n. exe.1 Sqm each.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid PVC moulded door shutter with partical board core, 30mm thick 2mm thick moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm wood grain printed PVC sheet and edges will be painted to match with printed sheet complete all as specified.

S & F factory made 35mm thick IInd class hard wood glazed/guage skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded ,fitted with cut and mitered bead for securing glasses etc, doors etc are provided with stiles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20(b), complete all as specified and directed.

S & F factory made 40 mm thick IInd class HW plain framed panelled shutter (any numbers of panel) with lock rail &panel of 9mm B.W.P. commercial ply or12mm veneered particle board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated all as specified.

S & F factory made 30mm IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded ,fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with stiles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20(b), complete all as specified and directed.

S&F factory made 30 mm thick flush shutter solid core construction with partical board core and plywood face panels commercial type on both sides complete all as specified and directed

S&Fsecond class hardwood, plain solid, straight, chowkats and framedrebated on solid,roundedor chamfered put together with glue pinned at joint complete all as specified and dircted

M&L for repairs by dismantlig of existing wooden floor and provide new HDF laminate wooden flooring of 08 mm thick over 2 mm thick Foam sheet over a layer of polythene film sheet and all necessary fixtures to match with existing floor level and finished top finished floor. completed all specified and directed.

S & F Steel windows box type with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded incl cutting holes in wall for inserting holdfast and making good to the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

S & F Steel windows box type with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded incl cutting holes in wall for inserting holdfast and making good to the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

S & F Steel ventilators box type with centre hung shutter including hinges, steel peg stay, complete all as specified.

S&F powder coated aluminium window with double shutters (both gauzed and glazed) with and including alumnium grills 5 mm thick and average width of aperture 50 mm and S S wire cloth 0.46mm dia of wire and 1.18mm aperture, fixed on aluminium frame 150 mm x 37.5 mm x1.6 mm thick, shutter with bottom rail, middle rail, top rail and styles of size 44.45 mm x 47.62 mm x 1.6 mm thick as per IS 737-1986 and glazed with tinted glass 5 mm thick as per standard practices and with handle, hinge & tower bolt arrangements complete all as specified and as directed.

S&F aluminium powder coated door fixed on aluminium frame of section 47.62mm x 44.45x1.6 mm thick, shutter glazed with tinted glass 5mm thick fixed with rubber gasket and aluminium strips as per standard method also rubber gasket at frame so as to make air tight with cast type handle aluminium anodised of 150mm size 2 Nos (One on each side of shutter) with shutter bottom rail 150mm x 44.45mm x1.6mm thick section, middle and top rail 83.5mm x 44.45mm x 1.6 mm thick section, side style 83.5mm x 44.45mm x 1.6 mm thick section all as sper IS 737- 1986 fixed with aluminium (extruded section) hydraulic door closer egulated designation No-3 universal type and make with 2 numbers aluminium tower bolt arrangement of standard make with locking arrangement with 6 levers mortise lock(brass body) of size 100mm etc complete all as specified and as directed.

Supply and fix 100mm long butt hinges stainless steel all as specified and directed.

Supply and fix 75mm long butt hinges stainless steel all as specified and directed.

S & F 200mm long stainless steel barrel tower bolts specified and directed.

S & F 150mm long stainless steel handle

S&F 100mm long stainless steel handle.

S&F 300mm long stainless steel sliding door bolt, plate type with bright bolt not less than 12mm dia and including minimum 6 bolts and nuts etc all as specified and directed.

S&F 300mm long ordinary rat tail rod pattern spring including roller and plate complete fixed in repair

Hacking out old broken glass pane (any size thickness and description) from wooden / steel frames complete all as specified.

S&F 4.5mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

S & F 3mm thick sheet glass ordinary quality glazing in square nexc. 0.5 sqm in each pane all as specified.

S&F stainless steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks/wooden beads or galvanized wire staples complete all as specified and directed.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work ( FE 290 Gde E -169 ) .

S&F in repairs Plywood, 12mm grade BWR, type BB, fixed with screws to timber frame work complete all as specified.

S&F Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

M&L in repairs for Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised.

M & L for 20mm thick screed bed in cement mortar (1:4) over concrete surface finished even & smooth with out extra cement with water proofing compound @ 3% by weight of cement or as per manufacturer instructions while the concret is green (WPC shall be paid separately)

M & L for a coat of cold applied bituminous primer over cleaned surface @ 0.50 Kg/Sqm and laid 3mm thick APP modified five layer ploymeric membrance, minimum wt 3.60 Kg/Sqm reinforced with polyster non woven fabric (weighing not less than 150gms/Sqm) with torch application mathod as per the manufacturer's instructions with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces wih grooves & make good in cement mortar 1:3 , finally finished with bituminous aluminium paint @ 0.20 Kg/Sqm etc complete all as spefified including taking down existing roof treatment from the RCC slab, cleaning off all foreign material by wire brushing cleaning off surface and removal of spoil out side the IMA premises complete all as directed. Make STP / SIKA / PIDILITE , AS RECOMMENDED by Engr in - charge and Approved by GE. NOTE :- (a) Work shell be executed by authorised applicator of manufacture as per manufacturers instructions and upto roof hight of tripple stories building.(b). 10 years of manufacture's guarantee shall be excuted in smart assurance system complete all as specified. and directed. (Incl removal of existing roof treatment / padding)

Supply only water proofing compound (powder) completed all specified and directed.

S & F in reapirs factory made Precast reinforced cement concrete M-30 of thickness 60mm manhole cover slabs with 10mm re inforcement, moulds, hooks incl painting etc complete all as specified and directed. Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula.

M&L for 15 mm thick ready mix internal/external/ceiling cement plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, including taking dowan existing plaster all complete asspecified and directed Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom)/ unicrete.

M&L for PCC 1:2:4 type B-1 (20 mm graded crushed stone aggt) as in bed plate cills steps copping , similar bands kerb etc complete all as specified and directed.

M&L for Providing, cement concrete type 1:2:4 type B-1 using 20mm graded in roof kerbs or mud stops, rounded or chamfered on edges Ditto, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for 75mm thick PCC 1:3:6 type C-2 using 20 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base filling and mass concrete complete finished evenand fair all as specified and directed

M & L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone agg) as in floor and finished the surface even and smooth with using extra cement with glass strips all as specified.

M & L for 100 mm thick PCC 1:2:4 type B-2 (using 40 mm graded crushed stone agg) as in PCC in Hard standing in alternate bay with expension counstrution joint duly filed with grade A compound etc.finished even and smooth without using extra cement & providing spike rolling to surface while the concrete is green all as specified.

Demolition of cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level ) unreinforced

M&L for Vitrified Ceramic colour jointless tiles (600x600) 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. Over 15 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in grout to match the colour of tile complete all as specified.

M&L for vitrified ceramic coloured jointless tiles (600x600) 8-9mm (square/ rect) polished,, area of each tiles not exc 0.36 sqm inverticle surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in grout to match the colour including 10 mm thick rendering in cement mortar 1:4 complete all as specified.

M&L for Non skid ceramic coloured tiles 7-8 mm thick,area exc 0.06 sqm but nexc 0.11 Sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in grout to match the colour of tile incl 15mm thick screed bed in cement mortar 1:4 complete all as specified.

M&L for glazed ceramic coloured jointless tiles (300x450)x7mm thick as in vertical surfaces including 10 mm thick rendering in cement mortar 1:4 and set and jointed in neat cement slurry and pointed in grout to match the surface of tiles complete all as specified and directed

M & L for machine cut Kota stone 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing complete up to desired finish over & laid 20mm thick screed bed in cement mortar 1:6 directed .

M & L for chequered polished cement tiles heavy duty, 30CM X 30CM X 25 mm thick, set, jointed in neat cement slurry and pointed in grout to match the floor complete all as specified. & directed, including screed bed or bedding layer or mortar 15 mm thick in cement mortar 1:6 complete all as specified and directed.Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula.

M&L for Vitrified exterior colour tile (parking tiles) of size 30 cm x 30 cm x 09 to 10 mm thick and jointed with grey cement slurry and pointed in grout to match the shade over and including screed bed 15 mm thick in cement mortar 1:6 including dismantling existing tile complete all as specified and directed

M&L for Preparation old painted wooden surfaces any description over 10 cm width or girth and applying One coat of synthetic enemelled paint including all preparation complete all as specified and directed.

M&L for Preparation old steel surfaces exc. 10 cm width or girth and applying One coat of synthetic enemelled paint including all preparation complete all as specified and directed.

M&L for Preparation new wooden surfaces any description over 10 cm width or girth and applying two coats of synthetic enemelled paint over one a coat of pink primer complete all as specified and directed.

Preparation new steel surfaces exc. 10 cm width or girth and applying two coats of synthetic enemelled paint over one coat red oxide promer complete all as specified and directed.

M & L for complete removal of existing treatment on old decorated surfaces (plastered/un-plastered) on walls including cornices on plastered surfaces using mechanical sander/ scrapper complete all as specified and directed.

Material & Labour for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over old surfaces all as per manufacturers instruction and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces all as per manufacturers instruction and directed by EIC

M & L for preparation of old decorated surfaces (plastered/ un-plastered) of walls, removing all vegetation etc and applying One coat of white wash on walls complete all as specified and directed.

M & L for preparation of old decorated surfaces (plastered/ un-plastered) of walls including removing all vegetation etc and applying one coat cement based paint on walls complete all as specified and directed.

M & L for two coat of cement base paint on newly plaster surface over a coat of suitable primer all prepration complete all as specified and directed.

M & L for Preparation of new surfaces and applying two coat of distemper oil emulsion (OBD) over a coat of primer complete all as specified and directed.

M & L for Preparation of old surfaces of wall and applying one coat of distemper oil emulsion (OBD) ,complete all as specified and directed.

S&F 4 mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605 mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres all as specified and as directed by Engineer-in charge (size of main tee 38 mmX25 mmX 1.4 mm, cross tee 38 mm X 25 mm X 1.4 mm angle along walls 38 mm X 25 mm X 2.0 mm) and two coats of oil bound emulsion complete all as specified and directed including dismantling boarding any description fixed in any position with nails.

S&F stainless steel curtain rod, 25 mm dia,decorative including brackets, decorative finials at both ends complete all as spd. Incl. dismantling of existing rod.etc.

S&F in repair pre-painted galvalume aluminium zinc coating GI based tile profile corrugated steel sheet 0.50mm thick an colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall fixed with self tapping screws all as specified. Make :- Tata(blue scope)/Jindal India Ltd(neo color+)/JSW Steel (color on+)

S&F in repair pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick an colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall fixed with self tapping screws all as specified. Make :- Tata(blue scope)/Jindal India Ltd(neo color+)/JSW Steel (color on+)

M &L in repairs for 0.50 AZ 150 mm thick plain galvanised , pre profield (to match with roof sheet) mild steel sheeting , in ridge , hips , velly gutter , drips and straight flashing ( length and girth as fixed with grade of class-VIII.

M&L in repair for clean swan 2nd class hard wood in scantling.complete all as specified..

M & L 18/19mm Prelaminated particleboard, interior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination, fixed in repair with screws to timber frame work

S&F in repairs PVC sandwich wall Lining consisting of 5mm thick wood grains printed PVC sheet complete fixing at site as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed.

M & L in repair for door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repair of aluminium extruded section body.

S&F Structural steel, rolled section as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-410 W (Gde-E-250)all as specified and directed by Engineer-in-Charge

S&F in repairs Vitreous chaina any shade cascade floor mounted single piece water closet P/S trap with cistren for coupled WC with UF soft closing slim seat cover , hinges, dual flush cistren fitting , conversion bend, fixing accessories and accessories set complete all as spfd and directed. Make:- Jaquar Catpart N0- OPS-WHT15753NS250UFSMZ/ Cera cat pt-no- S1013105/ kAJARIA CAT PT- NO- KB-3007

S & F in repair vitreous China wash down water closet pan (Pedestal Pattern) white (excluding fixing bolt flushing cistern and flush pipe Complete all as specified.

S&F Vitreous china squatting pan white Orissa Pattern of size 580x440mm with integhral foot rest complete (excluding flushing cistern and flush pipe) including bend pipe for flush connection to trap and to flush pipe and making good the floor with provn of concrete bedding in repairs and all as specified and directed by Engr-in-charge.

S & F 10 litre capacity PVC valve less syphlonic action type flusing cistern low level white with inlet ball valve, float, handle including brackets etc fixed in repairs complete all as specified. Make:- Cera, Jaquar, Parryware.

S&F in repair vitreous china WHB white, flat back, size 550 x 400mm including brackets, 32mm Brass CP waste coupling, PVC waste pipe.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.fixed in repairs.

S&F in repairs stop valve cast copper alloy screwed down high presure screwed both end for iron pipe 15 mm dia fancy type cromium plated.

S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

S&F 15 mm dia Ball valve high pressure of PTMT with appoxy coated alu. Rod and highdensity plastic ball screwed for iron pipe. Make:- Cera, Prayag, Polytuf.

S&F 20 mm dia Ball valve high pressure of PTMT with appoxy coated alu. Rod and highdensity plastic ball screwed for iron pipe and fixed in repairs. Make:- Cera, Prayag, Polytuf.

S&F in repair CP brass hot and cold mixer cast copper alloy with centre hole without pop up with 450 mm long braded hoses for WHB for 15mm bore. complete all as specified and directed, MAKE; Jaquar ( opal prime)/Cera ( rubby series)/Kohler

S&F CP Health faucet 8 mm dia for EWC 1.20 mtr long flexible pipe with two steel check nuts r, fixed in repairs complete all as specified and directed. MAKE; Jaquar ( opal prime)/Cera ( rubby series)/Kohler

S&F in repairs 15mm bore long body bib tap Chromium plated with wall flange complete all as specified and directed.MAKE; Jaquar ( opal prime)/Cera ( rubby series)/Kohler

S&F in repairs CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with flange complete all as specified and directed.MAKE; Jaquar ( opal prime)/Cera ( rubby series)/Kohler

S&F in repairs PVC waste pipe 32/40 mm size of required length complete all as specified and directed.

M & L for chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union brass chromium plated shower rose 125mm size fixed in repair. Make:- Cera, Jaquar, Kohler.

S&F in repairs brass chromium plated towel rail, 20mm dia 'D' type 60cm long between flanges complete all as specified and directed. Make:- Cera, Jaquar, Kohler.

S&F stainless steel soap dish holder , fixed in repair complete all as specified and directed. Make:- Cera, Jaquar, Kohler.

S&F in repairs Stainless Steel toilet paper holder with cover Complete all as specified

S&F in repairs vitreous china Urinal complete with all fitting & accessories Make Jaquar Cat Pt No URS-WHT-13255+SNR-51097 or Cera Cat Pt No SN010101.

S&F in repairs chromium plated brass fancy type faucet for WHB complete with all accessories Make Jaquar,cera,Kohler.

M&L in repairs 18 to 20mm thick granite (of any type) (table rubbed and polished ) in steps , jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) inc pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F in repairs toughned urinal partition glass (frosted) of size 450x900x8mm fitted with all necessary accessories of make Jaquar Cat Pt No JSE-CHR-8104C 450X / JSE=810US450X

S&F in repairs for 0.75mtr x 0.90mtr bevelled edge looking mirror of any size 5.5mm thick fixed with plugs and studs with chromium plated brass screw/ SS screw and cup washer complete all as specified.

S&F in repairs Vitreous China any shade cascade floor mounted single piece water closet P/S trap with dual flushing cistren soft seat cover, hinges, coversion bend, fixing accessories set complete all as specified and directed.

S&F in repairs Vitreous China WHB table top Make :- Jaquar Cat Pt No VGS-WHT-8193IN or equivalent in cera/karovit

M&L in repairs 10mm thick earthenware Antic brick tile of of natural shade and colours size 230mm 75mm on vertical surface of wall over and including 10mm epoxy based adhesive suitable spaceers 3-5mm thick complete all as specified and directed.

M/s Vinod Singh Negi

Meher enterprises

ACE BUILDERS AND CONTRACTORS

Alankar Traders

Sharda Enterprises

M/S S P BUILDERS

KRISHANA ELECTRIC WORKS

Aron Water Proofing and Pest Control

M/S RAJESH KUMAR GOYAL

M/S PUNDIR BUILDERS

M/s caspur construction company