For Electrification of George Everest Peak Mussorie under Electricity Distribution Circle (Urban), Kaulagarh, Dehradun under Deposit Head on turnkey basis E-Tender Spceification No. 08/EDC(U)/2019-20.

Centralize Matrial :

ST Pole SP-21 Galvenized

ST Pole SP-33 Galvenized

Stay Set 16x1800

Stay wire 7/10 swg

ACSR Weasel conductor

HT 11 KV XLPE Cable 3Cx70 Sqmm

MS Earth Rod 20x250

M.S. Angle 65x65x6 mm

M.S. Channel 100x50 mm

E/W 7/16 SWG

11 KV Polymer Pin insuletor

11 KV 5 KA LA

GI Wire 6 SWG

GI Wire 8 SWG

11 KV Polymer Disc Insuletor

Disc fitting R/W

11 KV TPMO

11/0.4 KV 100 KVA T/F

DTR Metering cubical

DTR Distribution box 100 KVA

LT XLPE Cable 1x120 sqmm

Cable terimation Kit for 11 KV 3x70 sqmm O/D type

DE-CENTRALIZE MATERIAL

Al Crimping Lug 120 sq mm

PP & Clamp for ST Pole Sp-33 with N &B

Holding Clamp for XLPE Cable suitable for ST Pole Sp-33 with N &B

Stay Clamp for Sp-33 with N&B

E/W Clamp for Sp-33 with N&B

E/W Clamp for Sp-21 with N&B

LT Shakle insuletor with N&B

LT Clamp for SP-21 with N&B

LT Clamp for SP-33 with N&B

LABOUR

Carriage of ST Pole Sp-21/33 of Stock material from Store centre/JE store/other places to site of work distance approximate 0-70 km. With loading / unloading and Manual shifting upto 20 mtr at both end complete work

Carriage of Other Stock material from Store centre/JE store/other places to site of work distance approximate 0-70 km. With loading / unloading and Manual shifting upto 20 mtr at both end complete work

Carriage of 11/0.4 KV 100 KVA T/F from Store centre/JE store/other places to site of work distance approximate 0-70 km. With loading / unloading and Manual shifting upto 20 mtr at both end complete work

Carriage of XLPE cable Drum including loading unloading from Store centre/JE store/other places to site of work distance approximate 0-70 km. With loading / unloading and Manual shifting upto 20 mtr at both end complete work

Mannual cartage of ST Pole Sp-21/33 material from road site to pit site

Mannual cartage of Other Stock material from road site to pit site

Manual Shifting HT cable Drum

Excavation of foundation pit of size 0.9x0.6x1/5th of length of pole in mixed soil. Errecting of Single support with Grouting of above supports with cement concrete in size 0.45x.0.45x1/6 mtr length of supports with CC Ratio 1:4:8 with cement, core sand & Stone ballast after fixing of all accessaries of ST Pole SP-21/33

Excavation of foundation pit of size 0.9x0.6x1/5th of length of pole in mixed soil. Errecting of Double support with Grouting of above supports with cement concrete in size 0.45x.0.45x1/6 mtr length of supports with CC Ratio 1:4:8 with cement, core sand & Stone ballast after fixing of all accessaries of S.T pole 9.0 mtr long

Muffing/Plinthing of pole 300 mm above ground level size 0.45x0.45 mm in CC ratio 1:3:6

Erection of stay Rod including digging of pit in size of 1.2 x 0.6 x 0.6 mtr and grouting of rod in Ratio 1:4:8 CC in block of size 0.6x 0.6x0.3 mtr including nozzling fixing tensioning and tightening complete

Painting of Single ST Pole with one coat of red oxide & two coat of enamel Paint

Painting of Double ST Pole with one coat of red oxide & two coat of enamel Paint

Writing of Pole ID on yellow base with black colour

Fabrication of MS Channel 125 x 65 mm / MS Angle 65 x 65 x 6 mm and MS Channel 100 x 50 mm /MS Angle 50 x 50 x 6 mm iron etc. for making structure for placing T/F cross arms channels Guarding angle etc.

Fixing of 11 KV fuse set on erected D/P with all connection

Mounting & Fixing of T.P.M.O./GO switch including making of connections for smooth running and operation of T.P.M.O.

Lopping chopping of Tree branches & bushese for making proper clearance

Mounting and fixing of 11KV lightening arrester including making of connections with earthing along with fixing of GI Strip size 25x3. (3 No.)

Laying of 11 KV XLPE Cable Cable with proper support & tightning with E/W 7/16 ( tightned at every meter) and clamping on ST Support properly & complete work

Fixing of T/F base Channel on the above errected Double Pole stucture complete work as per UPCL norms for 100 KVA T/f

Earthing of support / double pole by MS earthrod of 2.5 mtr. long including excavation of pit and digging MS rod to proper depth and connecting the earth electrod with the help of G.I.wire as per UPCL const. manual.

Installation of 100 KVA new/repaired T/F on the plinth/DP with the help of manpower/ loading equipments/crane etc.

Laying, stringing and sagging of HT lines complete with binding and jumpering as per UPCL Norms on ACSR weasel

Guarding over road crossing/telephone/H.T & L.T. lines crossing with G.I. wire No. 6 SWG and G.I. wire No. 8 including fixing of angle brackets, X-arm with clamp Nut & Bolt each lacking (Tilli )must be properly binded on both side of gaurding wire

Laying, stringing and sagging of LT lines complete with binding and jumpering as per UPCL Norms 3 phase 5 wire/3 phase 5 wire on ACSR weasel

Fixing of DTR Metering cubical & LT Distributin box with connection Complete

Layying, stinging and Sagging of G.I. earth wire 7/16 (6 SWG)

Special type neutral and body earthing separately of T/F with dinging of pit in size of 3’x4’x15’with providing cost iron plate of size1.5’x1.5’x1 ½’duly covered with layer of soft coal 60 kg and salt 20kg (Total 80 kg)Earth plate shall be connected with GI strip shall be laid down up to the neutral and T/F Body separately in one piece (All material shall be arranged by the contractor at his own cost)

Laying of LT XLPE Cable

RJ ENTERPRISES

Universal Engineering

BIJENDRA KUMAR POKHRIYAL