Construction of Sports Stadium at Village Dhanora Jattan in Kurukshetra District (CM Announcement No. 12580 dated 29.05.2018) (Pdg. EI Estate Services only).

Amount

(I)Wires and Cables Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Size 2.50 sqmm ( 80 / 0.20mm). HRS No. 31.9 (i) e

( c ) Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. HRS No. 31.12 c (i)

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 50 mm x 50 mm x 6 mm. HRS No. 31.13(I)

(L)Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HRS No. 31.17a) (ii)

TPN MCB of 9 KA breaking capacity 6 amp. to 32 amp. HRS No. 31.17(a) (v)

(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HRS No. 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HRS No. 31.22(ii)

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. HRS No. 31.22(iii)

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. HRS No. 31.22(v)

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . HRS No. 31.22(xi)

Pdg. and fixing 25 mm x 5 mm GI strip on surface or in recess for connections etc. as required with all labour and material. HRS No. 31.22(xv)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HRS No. 31.22(xii)

(S)Under Ground Cables. Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections . 10 Sq. mm 2 Core Cable . HRS No. 31.26 (iv) Ard.

10 Sq. mm 4 Core Cable . (xxxix) HRS No. 31.26 Ard.

16 Sq. mm 4 Core Cable . HRS No. 31.26 (xI) Ard.

25 Sq. mm 4 Core Cable . HRS No. 31.26 (xIi) Ard.

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . HRS No. 31.28 (ii)

25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HRS No. 31.28 (iii)

Supply and erection of weather proof MS Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the MS Box including painting and necessary connections . HRS No. 31.30 (IV)

(v)Pedestal . Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 750 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 900 mm x 600 mm x 250 mm below ground level. HRS No. 31.33 (i)

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 4 sqmm (7 / 0.85mm). HRS No. 31.40 (iii)

Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 8-way, SP & N (Horizontal) HRS No. 31.41 (ii)

Supply and erection of MS sadles and clamps on wall / RCC parapit for fixing underground cable at at distance of 0.60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect. HRS No. 31.48

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer- incharge of the work. HDPE Pipe 63/50 outer dia / inner dia. HRS No. 31.67 (i)

Supply & errection of Hot Dip Galavnized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by manufacture including cost of foundation accessories etc. The foundation bolts as per manfacturer design should be hot dipped galvanized pole to complete with door locking arrangement.Terminal plate consisting of 2 nos. 100 A, 4 pole natural links including connection etc. with suitble connecting arrangement for 2 no. MCBs/ kit kat including cost of R.C.C 1:1. 5:3 for foundation size 0.7M x 0.7M x 1.8M with minimum of 8 nos 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. 7 Mtr. Long pole with top dia 70mm and bottom dia 130mm with base plate of size 220x220x12mm. HRS No. 31.68 (i)

HIGH MAST POLE Supply, installation, testing and Commissioning of 12.5 Mtr. Long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 part-3 suitable for 6 Nos Lumnaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufactured with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bollts , installation at site complete in all respect upto entire satisfaction of engineer-in-charge. Thickness of Top Section =3mm (minimum) Bottom Section =3mm (minimum) Bottom Section = 3mm (minimum) Thickness of Galvanization Top =65micronb (min) Bottom =85microm(min.) HRS No. 31.83 i

Supply and erection of 200 Watt LED Flood light luminaire with secondary optics made in pressure die cast housing and heat sik in aluminium extrusion and IP66 Protection including connection of the same upto the entire satisfaction of Engineer in Charge of the work. Make: Havells/ Crompton/ Philips/Bajaj/Wipro/Surya.NS - 1

Supply/ Erection/ Testing commissioning of Hot Dip Galvanized Detachable T- type bracket suitable for 3/4 Nos. fittings made out of 50 mm Sq MS pipe 1000mm long with sleave of size 88.9 mm, 300 mm long as per drawing suitable for 7Mtr. Octagonal poles complete with all hardware material like Nut-Bolt, Hot Dip Galvanized after fabrication painted 2 coats of aluminium paints on bracket including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge of the work.NS - 2

Supply & erection of enclosure for MCCB upto 63Amp. (Indo asian make) Complete with labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. (similar make of L&T, Havells & Standard).NS - 3

Cost of cutting of metal road & repairing, filling etc. including all labour charges with petty materials complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.NS - 4

Supply and erection of 2.5 Sqmm, 3 core PVC insulated copper cable, Polycab FRLS Insulated Single Core Unsheathed Industrial Flexible Cable conforming to IS 694:2010 with Flexible Bright Annealed Copper Conductor for Voltage Grade 1100 Volts, ISI marked in existing pipe complete with necessary connection (make Polycab).NS - 5

Supply and erection of 32 Amp. 3 Pole/230V Astronomical automatic time switch of Hevells / Indo Asian / LNT make Cat No. TL032ASO alongwith contactor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.NS - 6

Const. of R.C.C Foundation for 12.5/16/20Mtr. High Mast foundation, size 0.7M x 0.7M x 1.8M with minimum of 8 nos 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the high mast with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. L/S NS - 7

Bakshi Brothers