C/O of new 120 Nos Girls Hostel at Dr RPGMC Tanda (HP) (SH C/O Civil work including water supply and sanitary Installation ,Rain water Harvesting System, Septic tank and protection work etc.).

Amount

Excavation in foundation, trenches etcetera. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, shoring, strutting or bailing out water (Surface and sub soil water) upto any depth or height any quantum of water including de-watering removal of slush, lift upto any height, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimetre)layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in drains and channels etcetera; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiseling or wedging out rocks where blasting work is prohibited including shoring, strutting and pumping or bailing out water (Surface and sub soil water) upto any depth or any height any quantum of water including slush which may arrise during dewatering any other mixed variety of soil, lift upto any height, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layer when required into plinths, sides of foundations etcetera; consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specifications, approved drawing, design, specification and as per the entire satisfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Sand filling under floor including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings windows sills, cornices, arches, moulding, corbelling including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etcetera; including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in edges of slab and breaks in floors and walls under any thickness including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in vertical fins and vertical sun breakers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls (any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Stone filling in plinth with hard stone approved quality under floor including watering, ramming, consolidating and dressing complete as per specifications, approved drawing, design as per entire satisfactions and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum ccompressive strength of 20N/mm2 (Twenty Newton per square millimetre) with minimum cement contents not to mix less than 330 kg (Three hundred thirty kilogram) per cubic metre to give a smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete in all depths/thickness upto all floors levels as per specifications, approved drawing, design as per entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum comressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depths/thickness including mouldings, cornices etcetera; upto all floor levels as per specifications, approved drawing, design as per entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic meter mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts in all depth/thickness for all floors heights as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in vertical and horizontal walls/fins (thickness not more than 0.10m) (Zero point one zero metre) individually or forming box louvers and projected band upto all floor level as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with minimum cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre, as per approved design mix mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in walls any thickness (thickness not more than 0.10 m) including attached pilasters, buttresses, plinth and string courses etc. from the top of the foundation as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications, approved drawing, design including carriage of material within all heights leads, lifts and other incidentals and as directed by the Engineer-in-charge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic meter, mechanically mixed, vibrated and curing complete for reinforced concrete Chhajjas for all thickness in all floor levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work but excluding the cost of reinforcement for reinforced concrete work up to all floor levels up to all height as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and specifications. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre mechanically mixed and vibrated to give smooth and even surfaces including centring, shuttering and reinforcement as in mouldings, cornices, window sills etcetera to any girth, as per specifications, drawing and design complete, as directed by the Engineer-in-charge.upto floor all levels including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing Tor steel reinforcement of TATA/Sail/Tisco for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per specifications, approved drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints with cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetres) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate) 12.5mm (Twelve decimal five millimetres nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) or equivalent using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class brick masonry using common burnt clay building bricks in super-structure upto any floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class half brick masonry using common burnt clay building bricks in super-structure upto all floor levels in cement mortar 1:4 (One cement: Four sand) and curing complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. (mild steel) IRC Fabric Jali including M.S. (mild steel) frame and necessary screws complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetres) thick Phenol bonded both side prelaminated BWP grade partical board in matt finish ISI marked IS No. 12863 as per approved shade of Greenlum or its equivalent as per specifications, drawings design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetres) thick water proof termit resistant commercial board of Centuary/Alpro for shutter of cup board including 25mm (Twenty five millimetres) hard wood edging fixing with nickel plated piano hinges with screws complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetres) thick water proof termit resistant commercial board in shelves/box of Kit ply /Centuary/Alpro for cup board including its shelves and all cut portions of the board shall have 6/12mm (Six/Twelve millimetres) thick hard wood edging with butt joints & fixing with nails & screws etc complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 8mm (Eight millimetres) thick ply wood lining of Kitply/Century ply with butt jointing (frame work and cover fillets to be measured and paid for separately) complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetres) thick water proof commercial board in SDB shutter of Kitply/Centuary ply including all cut portions of the board shall have 6/12mm (Six/Twelve millimetres) thick hard wood edging and all exposed portion shall be finished with 1mm (One milimetre) thick lamination of approved shade in matt finish including fixing with nickel plated piano hinges with screws etc complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. (Mild steel) plain Grill of required pattern to existing windows/ ventilatiors including fixing with screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen millimetres) size aluminium Pilot/sheel or its equivalent sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other. incidentals. as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium oxidzed seccular anodized transparent or dyed to required colour and shade with necessary screws etcetera.Tower bolts (Barrel type) bright finished with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

200x10mm (Two hundred into Ten millimetres) nominal size

150x10mm (One hundred fifty into Ten millimetres) nominal size

Providing and fixing aluminium Pilot oxidized seccuolar anodized transparent or dyed to required colour and shade handles with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five millimetres) nominal size

100mm (One hundred millimetres) nominal size

Providing and fixing 250mm (Two hundred fifty millimetres) size aluminium Seccolar anodized transparent or dyed to required colour and shade with necessary screws etcetera; hooks and eyes complete including carriage of material within all leads, lifts and other. incidentals. as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing 50mm (Fifty millimetres) thick cement concrete flooring with metallic concrete hardner topping under layer of 35mm (Thirty five millimetres) thick cement concrete 1:2:4 (One cement : Two sand: Four graded crushed stone aggregate 20mm (twenty millimetres) nominal size) and top layer of 15mm (fifteen millimetres) thick metallic concrete hardner consisting of mix 1:2 (One cement hardner mix : Two stone aggregate 6mm (Six millimetres) nominal size) by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (Four parts of cement : one part of metallic floor hardening compound of approved quality be weight) including finishing complete upto all floor level, including carriage of material within all leads, lifts of material and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing nd laying 25mm (Twenty five millimetres) thick Kota Stone flooring (Mirror polished) of 55x55cms (Fifty five into fifty five centimetres) size of approved shade over base of cement mortar 1:4(One cement: Four sand) laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing/moulding single or double complete including carriage of material within all leads, lifts of material and other. incidentals. as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and lying 25mm (Twenty five millimetres) thick Kota Stone flooring 55x55cm (Fifty five into Fifty five centimetres) size Mirror polished with 7.5 cm (Seven decimal Five centimetres) wide uniform colour of Jaislmer yellow marble band laid voer base of 20mm (Twenty millimetres) thick cement mortar 1:4 (One cement: Four sand) and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including nosing, rubbing and polishing complete including carriage of material within all leads, lifts and other incidentals as per approved architectural drawing, design and specifications and as directed by the Engineer-in-charge The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying automatic vibro hydraulically compressed and polished precast terrazzo tiles of ISI marked No. 1237 in 70% (Seventy percent) white cement and 30% (Thirty percent) grey cement. The ratio of chips shall be 55% (Fifty five percent) white chips and 15% (Fifteen percent) each maroon, yellow and dark green shade. The size of chips shall be O,B, 2B of NTC(SG 403-B), the precast terrazzo tiles having size 300x300x25mm (Three hundred into three hundred into twenty five millimetres) with marble chips of specified sizes shall be laid in floors, treads of steps, ramp and landings on a bed of 25mm (Twenty five millimetres) thickness in cement mortar 1:6 (One cement : Six Sand) jointed with cement slurry and mixed with pigment to match the shade of tiles (Wherever required) including rubbing and polishing complete upto all floors levels, including carriage of material within all leads, lifts and other incidental and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying anti skid ceramic tiles (Dura stone) of Somany/Nitco/Rak of minimum 5.5 mm (Five point five millimetres) thick in flooring 300x300mm (Three hundred into Three hundred millimetres) size in treads of steps laid on a bed of 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : three sand) finished with flush pointing in white cement upto all floor levels, including carriage of material within all leads, lifts and other incidental and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetres) thick kota stone slab skirting (mirror polished) in risers of steps, dado and pillars laid on a bed of 12mm (Twelve millimetres) thickness cement mortar 1:3 (One cement : Three sand) and jointed with Grey cement slurry mixed with pgiment to match the shade of the slabs including rubbing, nosing and polishing and moulding complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Precast terrazzo tiles hydraulic compressed 20 mm (Twent millimetres) thick (with marble chips of specified sizes) in skirting and risers of steps not exceeding 30cm in height on 10mm (Ten millimetres) thick cement mortar 1:3 (One cement : Three sand)jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) upto all floor levels complete including rubbing, nosing and polishing complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Kota stone flooring with semi round nosing 25mm (Twenty five millimetres) thick laid on 20mm (Twenty millimetres) thick base of cement mortar 1:4 (One cement: four sand) and jointed with grey cement slurry mixed with pigment to match the shade of kota stone including rubbing and polishing complete incluing carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying granite stone in flooring with semi round nosing laid on 20mm (Twenty millimetres) (average) thick base of cement mortar 1:3 (One cement: Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete incluing carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying white glazed tiles 6mm (Six millimetres) thick in skirting of IS quality 30x45cm (Thirty into Forty Five centimetres) of Orient/Bell/Rak/Kajaria of approved shade in risers of steps and dado on 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete 40mm (Forty millimetres) thick precast inter locking paver blocks ISI marked of NTC IS No 15658 in PVC/fibre moulds with vibro compacted upto M-50(M-Fifteen) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (Twenty five millimetres) thick average thickness of cement mortar 1:4 (One cement : Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete 60mm (Sixty millimetres) thick inter locking paver blocks ISi marked of NTC IS No-15658 vibro compacted upto M-50 (M-fifty) grade in PVC/fibre moulds including border or kurb block Grey or coloured over sub-base of concrete with 25mm (Twenty five millimetres) thick cement mortar 1:4 (One cement : Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (sub-base of concrete floor to be paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying red sand stone slab flooring 40mm (Forty millimetres) average thick on 25mm (Twenty five millimetres) average thick base of cement mortar 1:4 (One cement : Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the red sand stone slab including rubbing, nosing and granite polish finish complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero millimetres) thick prepainted steel sheet TATA / Shakti or its equivalant in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six millimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required including carriage of material within all leads, lifts of material and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips laying propper Gola/shape 60cm (Sixty centimeters) over all with 0.60mm (Zero point Six zero millimetres) thick prepainted sheet ridges with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Tweny) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimeters) over all with 0.60mm (Zero point Sixty millimetres) thick prepainted sheet roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 5 (Five) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimeters) wide 30cm (Thirty centimeters) deep of 0.60mm (Zero decimal six zero millimetres) thick plain G.I. sheet gutter with iron brackets 40x3mm (Forty into Three millimetres) size shall be provided with dome shade grating including bolts, nuts and washers etcetera and making necessary connections with rain water pipe complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge complete. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying brick bat fillng in sockpit complete as per specifications, approved drawing, design as per entire satisfactions and directions of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals as per approved specifications drawing, design. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plain M.S. (mild steel) B.P. sheet 2mm (Two millimetres) thick fixed in eaves board/ceiling/cutting soffits/ceiling including jointing with gas/electric welding in position and applying a coat of red lead primer complete (frame work is to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100 mm (One hundred millmetres) dia pipes on wall face P.V.C (D-Plast) rain water pipes of Supreme/Kisan of working pressure not less than 4.5 kg/cm2 (Four point five kilograms per sqaure centimetres) high density pipe confiming to IS Code 4985-2000 including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millmetres) dia plain bend on wall faces P.V.C. (D-Plast) accessories for rain water pipes of Supreme/Kisan high density pipe confiming to IS Code 4985-2000 including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100 mm (One hundred millmetres) dia plain shoe on wall faces P.V.C. (D-Plast) accessories for rain water pipes of Supreme/Kisan class-B working pressure not less than 4.5 kg/cm2 (Four point five kilograms per sqaure centimetres) confiming to IS Code 4985-2000including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-in-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing galvanised M.S. holder bat clamps of approved design to PVC rain water pipe embedded in cement concrete blocks 10x10x20cm (Ten into ten into twenty centimetres) of 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size including cost of cutting holes and making good the walls etcetera; including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flushing 38cm (Thirty eight centimetres) overall with 0.60mm (Zero point six zero millimetres) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per specifications and as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per approved architectural drawing, design and specification. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections in trusses and framed work including cutting, fixing, lifting, hoisting and placing in position complete of TATA/SAIL and applying a coat of red lead paint in gratings, framed gaurds, bars, ladders, railing, brackets and similar work, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections, joints channels, angles, tees frame work for ceiling/false ceiling flats with connection plates or angles, cleat as in trusses, trussed purlins, main and cross beams, hips jack rafters, purlins connected to common rafters and the like of TATA/SAIL in building including cutting, fixing, lifting, hoisting and; placing in position and applying a coat of red lead paint complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm thick 1st class deodar wood panelled glazed shutter for doors, windows and clerestory window. Above middle rail 6mm (Six millimetres) thick glass shal be provided and below middle rail panel shall be of 12mm (Twelve millimetres) thick water proof ply decorative teak hard wood beading on both sides of shutter shall be provided including black enamelled iron butt hinges with necessary screws complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing anodised aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal/Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron cupboard frames manufactured from M.S. Angle iron section 25x25x5mm (Twenty five into Twenty five into Five millimetres) thickness including hinges jamb,lock jamb,beed and if required angle threshold of mild steel angle 25x25mm (Twenty five into Twenty five millimetres) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two decimal Five millimetres) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface complete in all respect as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing anodised aluminium work for shutters of doors windows & ventilators shutters of Jindal/Hindlco aluminium extrusion including providing and fixing hinges/pivots and making provisions for fixing of fittings wherever required including the cost of PVC/neoprene gasket as required (fittings and glazing/panelling shall be paid for separately)with extruded built up standard tubular and other sections of approved make conforming to IS : 733 and IS : 1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass/stainless steel screws all complete for shutters Jindal shall be used as pe specifications, approved drawing, design as per entire satisfaction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in doors, windows, ventolators, shutters and partition etcetra with glass panes of 5mm (Five millimetres) thickness of Modi Guard with PVC/Neoprene gaskets etcetra as per specifications, approved drawing, design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing galvanised M.S. wire guage of I.S. Guage designation 85-G with wire of dia 0.56 mm (Zero point five six millimetres) for Aluminium doors, windows and clearstorey windows including necessary accessories complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 50mm (Fifty millimetres) dia Readymade D-section hand rail in Balcony/Terrace with 4 Nos posts at corners to be made of 2 Nos. (TWo numbers) angle iron 40 x 40 mm (Forty into forty millimetres) welded together to make one post including baalusters which shall be made with 20 x 20 mm (Twenty into twenty millimetres) solid square bars as per pattern as shown in the elevation complete, as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing hard wood hand rail of 75 x 65 mm (Seventy five into sixty five millimetres) with M.S. flat 40 x 6 mm (Forty into six millimetres) welded with baluster 19 x 19 mm (Nineteen into ninteen milllimetres) and 12 x 12 mm (Twelve into twelve millimetres) M.S. (Mild steel) Solid square bars in combination at 30 cm (Thirty centimetres) centre to centre as per pettern as shown in elevation complete, as per specifications, approved drawing, design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing hollow pipe 40mm diametre hand rail slip resistant with round ends at two levels i.e 75cm and 90cm (Seventy five centimetres and ninety centimetres) height welded to 25mm (Twenty five millimetres) diametre M.S. (mild steel) hollow pipe The balusters should be embedded in cement concrete at the rate 60cm (Sixty centimetres) centre to centre with 25mm (Twent five millimetress) diametre M.S. (mild steel) hollow pipe moulded to shape and jointing with electrical gas welding and applying priming coat of red lead paint It should be extended 30cm (Thirty centimetres) beyond the top and bottom of the ramp as per detail refered in drawing No 33 Job No 7704 as per specifications including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) with Nerolac/ Asian paint on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian paint after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on over new wood and wood based surfaces with Nerolac/ Asian paint other than white brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material wthin all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement: Three sand) upto all floor levels complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) upto floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement: Five sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/ concrete /stone walls for interior plastering upto all floor level including arises, internal rounded angles, including grooves for water couses/construction joints, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:3 (One cement: Three sand) above plinth level to floor all all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying Birla J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with interior emulsion paint of Heritage/Allteck of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Distempering (two or more coats) with tractor synthetic washable distemper of Asian paints of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (Seventy five millimetres) thick bed of dry brick/stone aggregate 40mm (Forty milimertres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection 50mm (Fifty millimetres) thick cement concrete 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) including finishing the top surfaces of concrete smooth surfaces including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction of C.C. (Cement concrete) cover in cement concrete 1:3:6 (One cement : three sand : six graded crushed stone aggregate) including earth work shuttering and cast in-situ RCC slab over drain and cement concrete flooring 1:2:4 (One cement : two sand : four graded crushed stone aggregate) and finished with a floating cost of neat cement complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Distempering (two or more coats) with tractor acrylic washable distemper of Asian paints of approved brand and manufactire and required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matters and also including preparing the surface even and sand papered smooth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing wall with Heritage Silica duke texture finish of approved shade exterior grade emulsion of approved brand on undecorated wall surface (two coat) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt, dust and foreign matters including sand papering smooth and primer coat of required shade and brand or any adhisive if required complete including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing of expansion joint system related with wall joint/Internal/external location as per drawings and direction of Engineer-in-charge. The joints shall be filled up with polysterence back or red base members, self aligning/centring arrangement and support. The material shall be of such that it provides an expansion joints system suitable for vertical wall to wall/wall to corner application, both new and existing construction in office buildings and complexes with no slipping down tendency amongs the components of joint system. The joint system shall utilize light weight with polyrtrence with polystyrene back or rod surface mechanically shape locking the multi cellular to facilitate movement including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40 mm (Forty millimetres) dia chromium plated steel pipe Grab bar at 78 cm (Seventy eight centimetres) height with M.S. plate as per details at the position of the seat and wash basin complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Polythyelene – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe Kitec /Kisan U.V. stabilized with carbon black Conforming to IS-15450-2004 for water supply including clamp at appropriate spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including filling the joints with approved adhesive complete as per specifications, approved drawing, design and including entire carriage of material within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216 (16mm (Sixteen millimetres) Outer diameters pipe

1620 (20mm (Twenty millimetres) Outer diameters pipe

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc; including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216 (One thousand two hundred sixteen) 16mm (Sixteen millimetres) Equal Tee of Kitec/Kisan

1620 (One thousand six hundred twenty) 20mm (Twenty millimetres) Kitec/Kisan Equal Tee

1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) thread Equal Elbows of Kitec /Kisan

1620 x 20 mm (One thousand six hundred twenty into twenty millimetres) thread Female Elbow of Kitec/Kisan

1216 x 1216 x 15 mm (One thousand two hundred sixteen into One thousand two hundred sixteen into fifteen millimetres) thread Female Branch tee of Kitec/Kisan

1620 x 1620 x 15 mm (One thousand six hundred twenty into One thousand six hundred twenty into fifteen millimetres) thread Female Branch tee of Kitec/Kisan

1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) thread male connector of Kitec /Kisan

1620 x 15mm (One thousand six hundred twenty into fifteen millimetres) thread male connector of Kitec /Kisan

Providing and fixing Plytheline – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black Conforming to IS-15450-2004 of Kitec /Kisan composite fittings including fitting the joints with approved adhesive complete including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

PVC Long bend (40mm x 1.0 mtr.) (Forty millimetres into one metre) nominal bore/diametres

PVC Elbow (40mm) (Forty millimetres) nominal bore/diametres

Providing and fixing on wall face PVC (D-Plast) accessories for pipe 6kg/sqm working pressure clom B unplastisized high density pipe conforming to BIS code 14735 ISI marked fixed with approved adhesive including filling the joints complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC plain tee (110mm) (One hundred ten millimetres) nominal bore/diametres

Providing and fixing 15 mm (Fifteen millimetres) dia CP Brass accessories complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Extension Nipple CP Brass

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty millimetres to Forty millimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing in trenches P.V.C. Supreme/ Kisan pipe class "B" soil, waste and ventilating pipes conforming to IS No- 13592-92 fixing with adhesive mixure complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetres) nominal bore/diametres (2.7 mm (Two point seven millimetres) thick pipe

75mm (Seventy five millimetres) nominal bore/diametres (2.2mm (Two point two millimetres) thick pipe

Providing and fixing PVC Clamps of Supreme/Kisan conforming to IS No. 14735-99 of approved design with steel screws and rawl plugs etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetres) nominal bore/diametres

75mm (Seventy five millimetres) nominal bore/diametres

Providing and fixing PVC accessories for sewerage pipe plain bend of Supreme/Kisan conforming to IS No. 14735-99 including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetres) nominal bore/diametres

75mm (Seventy five millimetres) nominal bore/diametres

Providing and fixing P.V.C. tee medium class of Supreme/ Kisan/ Conforming to IS No-14735-99 ISI marked including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetres) diametres

75mm (Seventy five millimetres) diametres

Providing and fixing P.V.C. Supreme/ Kisan heal rest Conforming to IS No-14735-99 ISI marked including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetres) diametres

75mm (Seventy five millimetres) diametres

Providing and fixing P.V.C. Supreme/ Kisan Collar ISI marked Conforming to IS No-14735-99 including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetres) diametres

75mm (Seventy five millimetres) diametres

Providing and fixing P.V.C. Supreme/Kisan cowl ISI marked Conforming to IS No-14735-99 including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetres) diametres

75mm (Seventy five millimetres) diametres

Providing and fixing 110x90mm (One hundred ten into nineteen millimetres) nominal size/diameter P.V.C. floor trap Supreme/ Kisan ISI marked Conforming to IS-14735-99 of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etc complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing IS marked No. 2071 of Cera in white colour vitreous china water closet squatting pan (Orrisa type W.C. pan) size 58x44cm (fifty eight into forty four centimetres) orissa pattern (earth work, bed concrete, foot rest and trap to be measured and paid for separately) of approved shade including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Anglo Indian No-2061 of Hindware /Cera of approved shade vitreous china wash down water closet (European type W.C. pan) with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) (seat and cover to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash down water closet of CERA (European type W.C. pan) European seat No. 3128 (670 x 375 x 880 mm) (Six hundred seventy into three hundred seventy five into eight hundred eighty millimetres) 500mm (Five hundred millimetres) seat height of approved shade for person with disability with integral with P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) (seat and cover to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC 10 (Ten) litres capacity European standard control low level flushing cistern with dual flushing cistren ISI marked of CERA/Hindware and fittings with a pair of C.I. on M.S. brackets and other fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, C.P. brass handles, union and push button, couplings for connection with inlet,outlet and over flow pipe, 40mm dia C.P. (Cromium Plated) flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) nominal bore sand cast iron P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (One cement : One sand) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan including entire carriage of material within all leads lifts and other incidentals and as per specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat solid type and cover for wash down water closet with C.P. brass hinges and rubber buffers matching with shade of European W.C. pan including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin IS marked No. 1025 (Clair) of Cera / Hindware of approved shade having size 55x40cm (Fifty five into forty centimetres) with single hole for pillar tap and C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 610x460mm (Six hundred ten into Four hundred sixty millimetres) with bowl depth of 200mm (Two hundred millimetres) Hindware/Cera/Jaquar stainless steel kitchen sink with drain board od Parayag Polymers with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china pedestal I.S. marked No. 1025 Cera/Hindware of approved shade for wash basin complete with hole at the back for the resption of pipe and fittings including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) nominal size diametres rubber plug for wash basin (Heavy duty makes ISI marked No. 8931) of Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres M.I. union of Jal/ESS for wash basin or sink.complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres C.P. brass ISI marked IS No. 8934 of Jal/ESS ESS waste pipe for wash basin or sink including brass check nut complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating of Jal/ESS (Heavy duty makes ISI marked is No. 8934) for gully floor or Nahni trap including entire carriage of material within all leads, lifts and other incidental as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetres) beveled edge mirror of Hindware/Cera of superior glass mounted on 6mm (Six millimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty millimetres) C.P. brass Towel rail ISI marked IS No. 8934 of Jal/ESS ESS complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws etcetera including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into One hundred twenty millimetres) glass shelf with C.P. brass Jal/ESS ESS (Heavy duty makes ISI marked IS No. 8934) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder of (Heavy duty make ISI marked No- 8934) of Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. Jet spray of approved quality and ISI marked No 8934 of Jal / ESS ESS of approved quality and colour with one metre tube complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated PTMT push cock tap of ISI marked IS NO 8934 of Jal / ESS complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated fancy bib tap of ISI marked No. 8934 of Jal / ESS ESS complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametre C.P. brass stop cock IS marked No. 8934 of Jal/ESS ESS as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametres C.P. brass pillar tap with capstan head IS marked No. 8934 of Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametres brass angle valve without nuts IS marked IS No. 8934 of Jal/ESS ESS as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore C.P. brass full way valve with wheel ISI marked IS No. 8934) of Jal/ESS ESS as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetres) nominal bore C.P. brass full way valve ISI marked IS No. 8934) of Jal/ESS ESS high pressure with copper plate as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore C.P. brass valve (Horizontal plunger type) high pressure with copper plate as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetres) length complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. SINTEX water storage tank (Tripple layers) having capacity of 1000 (One thousand) liters of ISI 12701 marked with G.I. (Galvanised iron) inlet and outlet connection, 15mm (Fifteen millimetres) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying to level or slopes PVC pipe having 3mm (Three millimetres) thickness of Supreme/Kisan conforming to IS No. 13592-92 for PVC pipe for sewerage line and jointed with approved adhesive 150mm (One hundred fifty millimetres) internal diametres including testing of pipes and joints complete as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (One cement : Five sand : Ten graded crushed stone aggregate 40mm (Forty millimetres) nominal size) bedding for PVC pipe of 150mm (One hundred fifty millimetres) internal diametres including testing of pipes and joints complete as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty millimetres nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetres) 500mm(Five hundred millimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred ten millimetres) internal dimensions. Total weight of cover and frame should be 38 Kgs (Thirty eight kilograms) i.e. weight of cover 23 Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty millimetres nominal size) inside plastering 15mm ( Fifteen millimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetres) 1.00 mtrs(One metre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten millimetres) internal dimensions. Total weight of cover and frame should be 38 Kgs (Thirty eight kilograms) i.e. weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetres) nominal bore peat valve ISI marked IS No-8934 without nut and pipe complete including entire carriage within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying and fixing cast iron manhole cover with frame weight not less than 38 Kgs (Thirty eighty kilograms) i.e. weight of cover should be 23 kgs (Twenty Three Kilograms) and weight of frame 15 kgs (Fifteen Kilograms) complete within all leads, lifts of material and other incidentals, as per specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Kumar

Ravi Kumar

Ashwani Sood

PARAS SOOD