Addition and alteration at Taluka Court Building, Ta. Vagra, Dist. Bharuch (Transgender Toilet)

Name of Work :- Addition and alteration at Taluka Court Building, Ta. Vagra, Dist. Bharuch

(Transgender Toilet)

BILL OF QUANTITIES

It. No. Description of Item Quantity Unit Rate in Figure Total

1 Dismantling tiled of stone floors laid in mortar including stacking of 19.00 Sqm. 46.77

serviceable materials and disposal of unserviceable materials with

all lead and lift.

2 Providing and fixing FRP frame size 125x65 mm and 35mm thick 13.50 Sqm. 2615.04

FRP shutter having extra reinforcement on sides & edges in polish

finish. The core of the shutter & frame is to be filed up with injected

polyurethane foam done in situ along with embedded wooden

pieces for stiffening & also taking hinges & fixtures. The whole FRP

frame & shutter is to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of S.S

hinges with necessary screws & alluminium S.S fixtures &

fastenings & fastener sleeve.

3 P & L anti skid coloured ceramic tiles 30 x 30 cm size 6 mm thick in 3.40 Sqm. 957.63

flooring treads of steps and landing laid on a bed of 12 mm thick

cement mortar 1:3 (1-cement: 3-coarse sand) finishing with flush

pointing in white cement

4 Providing and laying coloured glazed tiles of the size 300 mm x 200 14.00 Sqm. 1417.36

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

5 Providing and fixing wash down water closet (European type WC 5.00 No. 3001.72

pan) with integral P and S trap including jointing the trap with soil

pipe in cement mortar 1:1 (1 cement : 1 sand) including providing

and fixing plastic seat cover for wash down WC with CP brass

hinges and rubber buffers back plastic seat and including providing

and fixing PVC flushing tank with a pair of CI or MS bracket with

complete fitting such as lead valve siphon 15 mm dia brass ball

valve with polythene float CP brass handle unions and couplings for

connection with inlet out let and over flow pipes 40 mm dia

porcelain enamelled flush bend including cutting holes in walls and

making good the same connection the flush bend with cistern and

closet vitreous China {Hindustan, Cera, Parryware or equivalent}

6 Providing and fixing wash basin with single hole for pillar tap with 10.00 No. 1939.20

C.I. or M.S. brackets painted white including cutting holes and

making good the same including pillar tap CP brass waste, stop

cock etc. necessary fitting (ii) Flat back wash basin 500mm x

7 Providing and fixing machine cut mirror polished green marble 2.50 Sqm. 1494.80

cladding (max. 150cm length) laid over 12mm thick base of cement

mortar 1:6 on sill, jambs and top in full width of wall and rounded

moulding of expose edge as directed etc. comp.

8 Providing and fixing screw down bib taps of following size (B) Brass 15.00 No. 186.83

chromium plated screws down Bib Tap (i) 15mm dia.

9 Providing and fixing 600mm x 450mm bevelled edge mirror of 5.00 No. 833.73

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

10 Providing laying and jointing in true line and level 25mm dia. 125.00 Rmt. 91.84

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

11 Providing laying and jointing in true line and level 15mm dia. 75.00 Rmt. 72.65

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

It. No. Description of Item Quantity Unit Rate in Figure Total

12 Providing, laying and jointing in true line and level 110 diameter 200.00 Rmt. 835.15

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diameter x

149 mm length x 145 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all

13 Providing, laying and jointing in true line and level 75 mm dia. 25.00 Rmt. 292.90

UPVC SWR (Type B) pipe conforming to IS 13592-1992 with one

end plain and other end socketed with rubbering and fitting

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp at every

2000 mm c/c or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including

cost of all materials.

14 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 5.00 No. 547.22

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I screwed down or hinged grating including

the cost of cutting and making good the walls.

15 Providing and fixing S.W. gully trap with C.I. grating brick masonry 5.00 No. 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight (i) Square mouth traps (B)

150mm x 100mm size P or R type

16 Providing and fixing acrylic multilingual Braille (raised dots) 15.00 No. 1853.86

DIRECTIONAL SIGNBOARDS of size 225 x 150mm designed as

per accessibility standards and having 3.5mm thick acrylic base

plate with Upper Case San Serif words made of white acrylic non

glare cut out letters of height 15mm raised not less than 0.8mm

above base plate and the equivalent word written in Hindi with

Devanagari non glare acrylic letters of height 15mm raised not less

than 0.8mm above base plate and having a non-glare acrylic cut

arrow pointing in the required direction. Each signboard to be fixed

as per manufacturers specifications on the wall at the approved

location and at a height of 1200mm from FFL complete as per

design / specifications and guidelines as per the entire satisfaction

of the Engineer-in-charge

17 Providing and Fixing EURONICS - Model No. EGR-S07 or 1.00 No. 7505.11

equivalent a wall mounted 38 mm dia U shaped horizontal stainless

steel collapsible grab bar 350mm length , 38mm vertical stainless

steel fixed grab rail of grade SS 304 matt finish from round pipe

supported and 75 mm dia 8 mm thick SS 304 base flange on wall

including anchor fasteners, nuts, accessories as per detailed

drawing etc. complete as directed by Architect or Engineer in

18 Providing and Fixing of Door mounted EURONICS - Model No. 2.00 No. 1661.25

NGR01-600MM or equivalent Stainless Steel Handicap Grab Bar,

Size 300 mm 35mm dia U shaped 600 mm long horizontal stainless

steel fixed grab rail of grade SS 304 matt finish including anchor

fasteners, nuts, accessories as per detailed drawing etc. complete

as directed by Architect or Engineer in charge.

19 Providing and Fixing EURONICS - Model No. EGR 19- Disabled 1.00 No. 6129.79

Grab bar Reverser L or equivalent , Size 750 mm x 600 , 32 mm

Dia Stainless Steel Handicap Grab Bar, wall mounted stainless

steel fixed grab rail of grade SS 304 matt finish from round pipe

supported and on wall including anchor fasteners, nuts,

accessories with necessary fixings as per detailed drawing etc.

complete as directed by Architect or Engineer in charge.

It. No. Description of Item Quantity Unit Rate in Figure Total

20 Providing and fixing flush door shutters, solid core construction with 27.50 Sqm. 1797.77

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges

with necessary screws. (B) Non-decorative type and block board

core anodised alluminium butt hinges in flush door shutters (2)

21 Providing and Fixing EURONICS - Model No. EGR 01-900 MM or 2.00 No. 2590.45

equivalent Disabled Grab bar , Size 900 mm long 32 mm Dia

Stainless Steel Handicap Grab Bar, wall mounted for Wash basin

support stainless steel fixed grab rail of grade SS 304 matt finish

from round pipe supported and on wall including anchor fasteners,

nuts, accessories with necessary fixings as per detailed drawing

etc. complete as directed by Architect or Engineer in charge.

22 Providing and Fixing EURONICS - Model No. EGR-03 Disable 1.00 Set 9565.51

Grab Bar (U shape) (Set of 2) 32 mm or equivalent , U shape long

32 mm Dia Stainless Steel Handicap Grab Bar, vertical support for

Wash basin set of 2 stainless steel fixed grab rail of grade SS

matt finish from round pipe supported and on wall including anchor

fasteners, nuts, accessories with necessary fixings as per detailed

drawing etc. complete as directed by Architect or Engineer in

23 Applying two coats of Birla (white cement based) or Asian (acrylic 375.50 Sqm. 40.59

lappy (putty)) or equivalent and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

24 Wall painting (two coats) with plastic emulsion paint of approved 372.00 Sqm. 119.42

brand and manufacture like Asian paints, Berger, Nerolac or any

equivalent brand and quality as approved by engineer on

undecorated wall surface to give an even shade including

thoroughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

25 Wall painting (two coats) with plastic emulsion paint of approved 93.00 Sqm. 124.68

brand and manufacture like Asian paints, Berger, Nerolac or any

equivalent brand and quality as approved by engineer on

undecorated ceiling and sloping roofs to give an even shade

including thoroughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

26 Removing dry or oil bound distemper by a washing and scraping 375.50 Sqm. 12.58

and sand papering the wall surface smooth including necessary

repairs to scratches complete.

27 Facility Informatory Sign :-Providing and fixing sign boards made 3.00 No. 3990.64

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 80 x 60 cms. rectangular as per design of IRC-67-

2012. Pre treated with phosphating process & acid etching; coated

with one coat of epoxy primer and two coats of best quality epoxy

paint ; reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x

75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted

with best quality epoxy coatings in black and white bends. The

details of symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc. Complete under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro Reflective

28 Providing and fixing standard extruded of alluminium section of size 58.00 Sqm. 1175.56

63.50 x 38.10 x 1.2 mm (of Jindal Section no 2434:,@ Wt 0.643Kg /

Rmt with colour anodized alluminium frame with 5 mm thick Frosted

glass as details etc complete for ventilation

It. No. Description of Item Quantity Unit Rate in Figure Total

29 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in 84.00 Sqm. 1141.45

skirting risers of steps and dedo on 10mm thick cement plaster 1:3

(1 cement : 3-coarse sand) and jointed with white cement slurry

Rs. Six Lakhs, Sixty Five Thousand, Six Hundred Twenty Two and Seventy One Paisa Only

I/We am/are willing to carry out the work @ ______________ % ______________

percent (should be written in figures and words) below / above, the estimated rates mentioned

above, amount of my/our tender works out as under :

Above all items of "Bill of Quantities" with Item Description, Unit, Qty, Rate & Amount have verified by me

and found order.

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in

all the tender.

5 The contractor will have to submit the mix design for different grades of cement concrete and

asphalt at his own cost before execution as directed and to be approved from the engineer in

Deputy Executive Engineer Executive Engineer

District (R&B) Sub Division Bharuch (R & B) Division

Bharuch Bharuch