CONSTRUCTION Of ANGANWADI IN EDAKUNNAM WARD 9

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Coarse sand (zone III)

Portland Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Sundries

Stone Aggregate(single size): 10 mm nominal size

wall form panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Carriage

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable span ESO+SI (2.35-3.40)

Adjustable telescopic prop 3 m (2.02-3.75m)

Average rate of mild steel round bars for reinforcements

Solid blocks of size 30x20x20cm

Solid blocks of size 40x20x10cm

Fine sand (zone IV)

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Plastic emulsion paint

Black Japan

Pink primer (for wood)

Synthetic enamel paint in black or chocolate shade

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc.

Vitrified floor tile 60x60 cm

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Vitreous China orrisa type w.c. pan size 580 mm

White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Hard board 6 mm thick

Rawl plug 50 mm (designation 10 nos)

Chromium plated Brass screws 25 mm

Brass bib-cock-15 mm dia

Brass stop-cock 15 mm dia

Polyethylene water storage tank with cover and suitable locking arrangemnet

PTMT - Soap Dish/Holder 138x102x75 mm

PVC pipe 25 mm outer dia . 12 kgf/cm2

PVC pipe 50 mm outer dia.6kgf/cm2

PVC door Elbow 63 mm dia

PVC bend 63 mm dia

PVC vent cowl 63 mm dia

PVC pipe 20 mm outer dia 10 kfg/cm2

PVC pipe 63 mm outer dia . 6kgf/cm2

Brass 100 mm mortice latch and lock with 6 levers without pair of handles

Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

200 mm Aluminium aldrop

Iron hooks & eyes 100 mm

Anjili wood scantls

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Mild steel tubes hot finished welded type

Welding by electric plant

Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm

Wire nails

Stone for masonry work

Solid blocks of size 30x20x15cm

Please Enable Macros to View BoQ information