Loading…
Loading…
Tender Value
₹23.9 Cr
EMD Value
₹23.9 L
Closing Date
23 Jun 2026, 6:00 pm
Muncipal Commissioner Nadiad
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION.
313108
01 OF 10TH JUNE 2026/27
Open
Solid Waste Management
Kheda
3 documents required · 3 mandatory
₹21,240
MUNICIPAL COMMISSIONER NADIAD MUNICIPAL CORPORATION
₹23.9 L
10 Jun 2026
10 Jun 2026
10 Jun 2026
23 Jun 2026
10 Jun 2026
SCHEDULE NO. NAME OF WORK AMOUNT IN RS.
SCHEDULE-B1 LAND FILL CELL
SCHEDULE-B2 LEACHATE COLLECTION WELL
SCHEDULE-B3 RWC CHAMBER & SUMP
SCHEDULE-B4 LEACHATE COLLECTION DRAIN & PIPE SYSTEM
SCHEDULE-B5 RAMP, INSPECTION ROAD AND APPROACH ROAD
SCHEDULE-B6 LC SUMP & PUMP HOUSE ON LC SUMP, PANEL HOUSE
SCHEDULE-B7 PUMPING MACHINERY WITH RISING MAIN FOR LECHATE COLLECTION
SCHEDULE-B8 FIRE HYDRANT SYSTEM WITH FIRE TANK
SCHEDULE-B9 PROPOSED ADMIN BUILDING
SCHEDULE-B10 PANEL ROOM, HT PANEL ROOM,& UG SUMP FOR C & D WASTE
SCHEDULE-B11 PROPOSED STROM WATER
SCHEDULE-B12 PLANT MACHINERY & FOOTING FOR MACHINERY FOR C & D WASTE
RCC RAMP, PLATFORM, RETAINING WALL, BASE PLATFORM AT TIPPING FOR C
Total Amount Rs.:-
Total Amount Rs.:-
SCHEDULE-C1 O AND M FOR SANITARY LANDFILL FOR 1st YEAR
SCHEDULE-C2 O AND M FOR CONSTRUCTION AND DEMOLITION WORK FOR 1st YEAR
Total Amount Rs.:-
Total Amount Rs.:-
Say Amount Rs.:-
I/We am/are willing to carry out the work @ _______% Above / Below___________Percentage (should be writen in figures and words) of
the Estimated rates mentioned above amount of my / our Tender works out as under.
ALL RATES ARE EXCLUDING GST , GST WILL BE PAID EXTRA
Estimated Amount Estimated Amount
Put to Tender Rs. Put to Tender Rs.
Add % Rs. Deduct %Rs.
Total Rs. Total Rs.
(In Words (In Words
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND
MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Clearing and grubbing road land including uprooting rank,
vegetation, grass, bushes, shrubs, samplings, existing waste
and trees girth up to 300 mm, removal of stumps of trees
cut earlier and disposal of stumps of unserviceable
materials and stacking of serviceable material to be used or
auctioned, up to a lead of 1000 mt including removal and
disposal of top organic soil not exceeding 300 mm in
thickness - By Mechanical Meansby by Dozer - In area of
Earthwork in cutting including preparing the slope and
camber andstacking or utilising the cutting stuff in bank
2.00 Iincluding watering and rolling the bank as directed upto 145503.80 cum 270.68
200 Meters from the end of cutting with all lead and lift.(i)
Earth work in Filling with excavated soil (obtained from
item of excavation) including Stabilization of excavated
ground soil in layers of 200 mm compacted thickness,
compacting to 95 % proctor density including water
sprinkling, dressing / trimming slopes etc. as directed at all
lead (any km) & lifts within landfill site including soil
analysis improving permeability and bringing it to less than
10⁻⁷ cm/sec by mixing bentonite / clay / lime / fly ash as
per mix proportion and blending ratio approved by NABL
approved laboratory. for Compacted Amended soil in floor
Earthwork for Embankment (Obtained from item of
excavation) in layers of 200 mm compacted thickness,
compacting to 95 % proctor density including breaking
clods, dressing with all lead and lift and including watering
rolling and consolidation of subgrade in layers at O.M.C. to
required dry density including filling the depression which
occur during the process using power roller 8T to 10T from
borrow pits within land width (more than 10 ton). (The rate
shall be inclusive of forming extra width of 0.5 m on both
sides & dressing, trimming, & compaction of the slopes as
per design & drawing).
Disposing off unserviceable excavated materials, debris, etc
in out side premises at any lead beyond initial lead of
mt including loading, transportation, unloading in layer of
5.00 300 mm with proper compaction & leveling within the 27654.68 cum 65.62
corporation Area of disposal of stuff etc as directed by
Engineer-in-charge.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND
MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Earth work in filling with good quality earth suitable for
grass plantation / lawn having electrical conductivity less
than 1 micron / centimetre and brought from outside, laid
in loose layers of 200 mm thickness, compacting to 95 %
proctor density including water sprinkling, dressing /
trimming slopes etc. as directed by EIC at all lead (any km)
& lifts. Borrow area shall be selected by contractor and no
extra leads shall be paid. For outside slope of bund
Providing & making PCC 1:3:6 in anchor stone as per drg.
For anchorage / support of Geo membrane at junction of
7.00 slope &flat surface of cell including all materials, labour, 113.40 cum 3352.52
curing, necessary excavation, including form work etc
Providing & laying coarse sand above HDPE Liner and
8.00 around perforated pipe as per drawing etc complete. 462.00 cum 429.63
Supplying & laying 1.5 mm th. HDPE Geo membrane liner
including providing overlaps, electro welding of joints,
anchoring, etc. complete as per manufacturer’s
specifications & as directed by Engineer-in-charge.
9.00 Overlaps to be included in price & will not be measured 41252.09 sqm 515.82
separately. Supply and laying of HDPE lining shall be carried
by Manufacturing agency as stated in approved vendor list
only. (Minimum width 7.0 M strictly as per specifications)
Providing and laying 230 mm thick pucca rubble pitching in
cement mortar 1:4 proportion with the surface pointed
with cement mortar of 1:3 proportion including curing etc.
complete for all leads
Providing & laying Needle punched non woven geo textile
of mass 500 gsm made of continuous filaments extracted
11.00 from polymers comprising polymers comprising 70 % poly 1215.95 sqm 231.77
propelene & 30 % poly ethylene Geo textile etc. complete
To obtain Consent to Establish, Consent to Develop,
Consent to Operate for Construction of new Sanitary
Landfill Cell including obtaining Environmental Clearance
from State Environmental Impact Assessment Authority
(SEIAA) and/or Ministry of Environment and Forest (MoEF)
or from competent and applicable / relevant government
body etc. complete.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND
MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
ITEM NO Quantity UNIT RATE AMOUNT Rs.
To carry out the precise survey work before commencing
and after completion of the works by taking accurate
levels jointly with corporation’s engineers for landfill cell
site at 5 meter intervals or as determined by Engineer in
charge based on the ground profile, by taking vertical &
13.00 horizontal ordinates with precise equipment like total 86010.00 Sqm 12.78
station and contour intervals marked or as directed by
Engineer in charge, at 0.5 M and spot levels will be on grid
of 5M x 5M both ways including all cost etc. completed
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
LEACHATE COLLECTION WELL
DESCRIPTION Quantity UNIT RATE AMOUNT Rs.
Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse
sand : 6- hand broken stone aggregates 40 mmnominal size) and
curing complete including cost of formwork in (A) Foundation and
Providing and laying controlled cement concrete M.250 and curing
complete including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (A) Foundations,
footings, Base of columns and Mass concrete.
Providing and laying controlled cement concrete M.250 and curing
complete including the cost of formwork (circular/ vertical) but
3.00 excluding the cost of reinforcement for reinforced concrete work 116.64 cum 5292.80
in(B) Walls, from top of foundation level upto floor two level
Providing, Supplying, cutting, bending and placing in position TMT
FE 500 D reinforcement as per plan & design and as per IS
4.00 specifications including cost of 18 Gauge annealed binding wire, 20045.40 kg 76.21
freight, loading, unloading, & all labour works etc. complete.
Providing water proofing plaster 20 mm thick in CM 1:2 using water
proofing compound of approved quality and in proportion as
5.00 recommended by the manufacturer including finishing even and 390.64 sqm 232.30
smooth with a floating coat of neat slurry etc. complete
Providing & applying 15 mm thick cement plaster in cement mortar
1:3 (1 cement : 3 fine sand) at all levels in single coat on fair or
6.00 rough side of brick or concrete work for all exterior works including 421.28 sqm 194.07
neat finishing, scaffolding, curing etc. complete.
Providing & fixing 150 mm wide 4/5 mm thick Serrated PVC water
7.00 stopper of approved quality in slabs, walls etc. as per details and/or 49.00 rmt 123.33
as directed by the Engineerin- charge.
Providing & laying 50 mm thick IPS in CC 1:2:4 with approved water
proofing compound as per manufacturer’s specifications including
8.00 racking of concrete surfaces, racking out of joints to maintain slope, 34.20 sqm 299.06
curing etc. complete as directed.
Providing and fixing cast iron steps of size 500mm x 150 mm x
9.00 mm and painting with two coats of Anti-corrosive paint etc. 120.00 no 181.70
Supplying and fixing RCC precast - M.200 Frame & cover suitable to
drainage M.H. and as per type design & Drawing including cost of
reinforcement M.S. Angles or Flat, curing mold work etc.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
LEACHATE COLLECTION WELL
DESCRIPTION Quantity UNIT RATE AMOUNT Rs.
Providing and supplying in standard length ISI mark high density
Polyethylene H.D.P.E. Pipes suitable for potable water as per IS
specification no. 4984/1995 including all local and central taxes,
transportation, freight charges, octroi, inspection charges, loading,
unloading, conveyance to the dept. stores etc. comp.
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
RWC CHAMBER & SUMP
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- hand broken stone aggregates
1.00 mmnominal size) and curing complete including cost of formwork in (A) Foundation and Plinth 3.04 cum 3352.52
Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but
2.00 excluding the cost of reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and 9.22 cum 4581.80
Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork (circular/
3.00 vertical) but excluding the cost of reinforcement for reinforced concrete work in(B) Walls, from top of foundation 58.32 cum 5292.80
level upto floor two level
Providing, Supplying, cutting, bending and placing in position TMT FE 500 D reinforcement as per plan & design and as
4.00 per IS specifications including cost of 18 Gauge annealed binding wire, freight, loading, unloading, & all labour works 10022.70 kg 76.21
Providing water proofing plaster 20 mm thick in CM 1:2 using water proofing compound of approved quality and in
5.00 proportion as recommended by the manufacturer including finishing even and smooth with a floating coat of neat 195.32 sqm 232.30
slurry etc. complete
Providing & applying 15 mm thick cement plaster in cement mortar 1:3 (1 cement : 3 fine sand) at all levels in single
6.00 coat on fair or rough side of brick or concrete work for all exterior works including neat finishing, scaffolding, curing 210.64 sqm 194.07
Providing & fixing 150 mm wide 4/5 mm thick Serrated PVC water stopper of approved quality in slabs, walls etc. as
per details and/or as directed by the Engineerin- charge.
Providing & laying 50 mm thick IPS in CC 1:2:4 with approved water proofing compound as per manufacturer’s
8.00 specifications including racking of concrete surfaces, racking out of joints to maintain slope, curing etc. complete as 17.10 sqm 299.06
Providing and fixing cast iron steps of size 500mm x 150 mm x 22.5 mm and painting with two coats of Anti-corrosive
paint etc. complete.
Supplying and fixing RCC precast - M.200 Frame & cover suitable to drainage M.H. and as per type design & Drawing
including cost of reinforcement M.S. Angles or Flat, curing mold work etc.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
RWC CHAMBER & SUMP
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Preparing structural design of RCC Under Ground / Partially under ground / above high ground level Reservoir of
required capacity as per relevant I.S.standards and constructing the same, including excavation in all types of soil
strata (including rock) including shoring strutting if required, for loose soil / to protect from collapse, casting 100 mm
thick P.C.C. leveling course in M-15, Refilling the pit with proper soil and disposing of the surplus stuff at all lead.
Including cement plaster in CM 1:2 With approved water proofing compound to all over inside container (i.e walls.
base, top slab/dome bottom, etc, all) Including all types of labour and material charges of lowering, laying, erecting /
hosting and jointing of pipe assembly to inlet, outlet overflow, washout and bye pass arrangement as per hydraulic
design. Providing and fixing accessories CI Manholes frame cover, water level indicator, adequate cowl type
ventilators or lantern type ventilator with stainless steel jail. RCC chambers for valves. Providing and applying three
coats of cement paint / snowcem to the out side face of structure. It also includes satisfactory water tightness test as
per relevant I.S. code and painting name of scheme and capacity on the tank as per direction of engineer in charge.
List of Indian Standards for Design of GSR / SUMP:- The structural design of GSR shall be in accordance with provisions
relevant IS standard. (1) I.S. 3370, Part – 1 & 2 2009 or latest revision. (1.01) I.S. 3370, Part – 3 &4 1965 or latest
revision. (2) I.S. 456 – 2000 or latest revision. (3) I.S. 1893 – 2000 – 1984 or latest revision. (4) I.S. 875, Part –
to 3, 1987 or latest revision. General Specifications:- (1) Water depth in container shall be adopted as per data of
tender. Capacity shall be calculated excluding free board of the reservoir, If water depth is not specified the suitable
water depth / acceptable to field engineer in accordance with hydraulic (2) Shape of container (in plan) specified
by in data shall be adopted in absence circular shape shall be adopted. (3) Size shall be fixed as per availability of
space (land area) at site / acceptable engineer in charge. (4) Effect of overlapping of pressure bulbs on soil due
near by structure and proposed sump should be considered. (5) Care shall be taken that no damage should occur
to nearby existing structure. Compensation shall be paid for the same by agency. (6) The minimum concrete grade
for RCC shall be M-30. (7) HYSD Fe 415 / 500 grade reinforcing bars confirming to I.S. 1786 / 1139 shall be
considered in design. CRS / TMT bars shall be provided. In saline atmosphere corrosion resistance stainless steel /
HCR rebar shall be provided. Any other steel can be used with approval of C.E./ in situation of non availability in
market without extra cost. (8) Minimum size (or thickness) of various components shall be provided as per tender
criteria / specifications in absnce as per I.S./ Std. practice of G.W.S.S.B. Minimum dimensions specified for various
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
RWC CHAMBER & SUMP
ITEM NO Quantity UNIT RATE AMOUNT Rs.
criteria / specifications in absnce as per I.S./ Std. practice of G.W.S.S.B. Minimum dimensions specified for various
components in tender data / specifications shall be provided without fail. (9) The safe bearing capacity (SBC) shall
be referred from SBC test report. In absence of report it shall be referred from data sheet. If poor soil is found / water
table is met with during excavation SBC shall be scientifically ascertained and design shall be revise. No extra shall be
paid for increase in quantity. (10) DI pipes and special shall only be used if type is not specified in tender.(11) The
rate shall include cost of dewatering during excavation making all arrangement when water table meets within depth.
(12) The structure shall be designed properly to resist uplift due to ground water table specified in data or actual
ground water table meets with during excavation. If GWT / Uplift is mentioned in tender and during excavation it
dose not meet 7.5% rate shall be reduced. (13) SS pipes railing shall be provided over sump perifery when sump is
greater or equal to 1.5 meter above ground level. (14A) RCC staircase /RCC steps should be provided from GL to
sump top slab based on the height of the GSR above/below the ground (14.b) RCC stair case with SS railing to be
provided inside reservoir container BB masonry stair cabin with MS safety door having locking arrangement to be
provided for GSR, Sump and HGLR of capacity more than 7.5 lakhs litre with top slab if dome is constructed as top
slab then provide minimum opening of 900mm x 2000mm with curbing and SS railing around (15) Appearance of
structure should be aesthetically good looking acceptable to authority. (16) Any charge in size, shape, depth below
GL, height above GL, water depth, F.B., size of member etc can be permitted in exceptional case due to site condition
or hydraulic design requirement by C.E. No extra shall be paid for change. (17) Any charge in data, dimensions,
shape, water depth, reduction in size if permitted by competent authority and if it reduces quantity then payment
shall be reduced prorate. (18) When capacity of GSR / Sump is > 20 lakh liters two or suitable compartments
acceptable to executive engineer shall be designed and provided. (19) Agency shall engage qualified (at least
graduate) consulting engineer for designing the structure and he / she shall visit the site for guidance of work. (20)
75% part rate shall be payable for concrete, reinforcement and plastering items of container until satisfactory
hydraulic testing for water tightness is performed as per tender condition. Till the work shall be treated as
incomplete..... Above conditions / general specifications Sr. No. 1 to 20 are part and parcel of tender (contact) and
prevail over other provisions in tender ---for Seismic zone - III ------.As abovo rectangular sump without water table
(Sub soil water level below foundation) - 50000 litre
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
RWC CHAMBER & SUMP
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
LEACHATE COLLECTION DRAIN & PIPE SYSTEM
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Providing, supplying, transporting, spreading and laying
300 mm thick Drainage Layer consisting of clean, hard,
durable, washed and graded gravel of size 10 mm to
mm, free from dust, clay, organic matter and other
deleterious substances, over prepared surface as per
1.00 approved drawings and specifications. The work shall 6286.50 cum 370.43
include loading, unloading, stacking, spreading to
required thickness, leveling, labour, machinery, tools
and tackles, and all incidental works complete in all
respects as directed by the Engineer-in-Charge.
Providing, supplying, transporting, spreading and laying
consisting of clean, hard, durable, washed and graded
gravel of size 20 mm to 40 mm, free from dust, clay,
organic matter and other deleterious substances, over
prepared surface as per approved drawings and
2.00 specifications. The work shall include loading, unloading, 759.63 cum 382.09
stacking, spreading to required thickness, leveling,
labour, machinery, tools and tackles, and all incidental
works complete in all respects as directed by the
Engineer-in-Charge.
Providing & laying 315 mm OD HDPE pipe, 6 kg/cm2 &
minimum wall thickness 22 mm of approved make to be
laid for leachate collection including all accessories,
fittings, flanges, etc as directed with perforation in
3.00 upper half of pipe & laying, jointing and setting bottom 924.00 rmt 2493.47
half of pipe in cement / bentonite / sand mix laid in
trench including providing said mix as per Drg. Including
all labours, materials etc. complete.
Providing and laying 450 mm RCC Pipe of approved
make to be laid for encasing leachate collection pipe
beneath earthen bund and storm water drain including
all accessories, fittings, flanges, etc as directed with pipe
4.00 & laying, jointing and filling gap 302.50 rmt 1765.45
with cement / bentonite / sand mix (3:3:96) including
providing said mix as per Drg. Including all labours,
Providing, laying & jointing 125 mm OD HDPE pipe,
kg/cm2 & approved make to be laid as vent pipe
including all accessories, fittings, flanges, etc as directed.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
LEACHATE COLLECTION DRAIN & PIPE SYSTEM
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Dewatering by pumping set of required capacity
including temporary platform carting pumping at site
and fixing the same in position including all accessories,
fuel and labour etc. complete.
Providing and laying cement concrete 1:3:6 (1- Cement :
3- coarse sand : 6- hand broken stone aggregates
7.00 mmnominal size) and curing complete including cost of 95.04 cum 3352.52
formwork in (A) Foundation and Plinth
Half brick masonry in common brunt clay building bricks
having crushing strength not less than 35 Kg/Sq.Cm. in
Cement mortar 1:3 ( 1-Cement : 3- coarse sand ) with
8.00 Nos of 6mm Mild steel round bars after every three 785.38 sqm 663.21
course embedded in Cement Mortar in foundation and
plinth (B) Conventional
Providing 15 mm thick cement plaster by using Ready
Mix Mortar for plaster in single coat on rough (similar)
side of single or half brick walls for interior plastering
upto floor two level and finished even and smooth in
Cement mortar 1:3 (1 Cement : 3 sand)
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH
OPERATION AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
RAMP, INSPECTION ROAD AND APPROACH ROAD
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Earthwork for embankment including breaking clods, dressing
with all lead and lift and including watering rolling and
consolidation of subgrade in layers at O.M.C. to required dry
density including filling the depression which occur during the
process using power roller 8T to 10T.(A) From Borrow pits
within land width
Construction of 150mm thick Granular Sub Base (Grading I) by
providing coarse graded Black Trap material, mixing by
machanical means / rotavator, spreading in uniform layers
with motor grader as per required slope and gradient on
prepared surface and compacting with vibratory roller at OMC
to achieve the desired compaction complete as per MORT & H
Providing & laying spreading and compacting 100mm thick
WBM Grade - I of B.T.M.C. metal 40 mm to 63 mm size
(Crushed Metal) including using 29% (22+7%) filler i.e. stone
screeing 13.2 mm at the rate 0.27 Cumt. & stone dust at the
rate 0.08 cumt. including spreading in uniform thickness, hand
3.00 packing, rolling with vibratory roller 8-10 tonnes in stages to 511.00 Cum 1840.56
proper grade and camber, applying and brooming type of
screning/binding materials to fill up the interstices of coarse
aggregate, watering and compacting to the required density.
Providing & laying spreading and compacting 150mm thick
WBM Grade - II of B.T.M.C. metal 25mm to 90mm size (hand
brocken) including using 20% (13+7%) filler i.e. stone screeing
13.2 mm at the rate 0.16 Cumt. & 0.08 stone dust including
spreading in uniform thickness hand packing rolling with
vibratory roller8-10 tonnes in stages to proper garde and
cmaber applying and brooming required types of
screening/binding materials to fill up the interstices of coarse
aggregate watering and compacting to the required density.
Providing and filling in foundation with ordinary Cement
concrete M-100 mix and providing necessary vertical pin
5.00 headers including formwork, vibrating, ramming and curing 638.75 Cum 3245.56
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH
OPERATION AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
RAMP, INSPECTION ROAD AND APPROACH ROAD
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Providing and casting in situ controlled cement concrete M-
200 wearing coat laid as directed dincluding tamping,
6.00 vibrating, finishing, curing and fillingin joints with bitumen 1022.00 Cum 5124.28
complete For 150 mm thick
Providing & Laying M,S,Side Rail of road thickness with
necessary nut bolt plates fixing as per width, applying
kg/sq. mt. metallic hardner, applying plate vibrator,electric or
diesel in channel.Comp. with V.D. system (Trimix) by using the
7.00 all necessary equipments & materil & machinery,such as 5110.00 Sqm 109.08
running screed vidrator on prelaid M.S.channel for levelling
vaccum pumps, floating & power trovelling & left spacing for
groove etc.Compl.
Supplying promoulded bituminous joint filler.(i) 12mm thick
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH
OPERATION AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
RAMP, INSPECTION ROAD AND APPROACH ROAD
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Providing TMT Bar FE 500D reinforcement for R.C.C. work
9.00 including bending, binding and placing in position complete 25550.00 KG 76.21
upto floor two level
Providing and fixing pre-cast concrete kerb stone of gray
cement based concrete block 30cm length,30cm height and
15cm thick of M200 grade concret as per approved design and
including excavation for fixing in proper line and level,filling
the joint with C:M 1:3 (1cement:3fine sand) etc complete.
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
LC SUMP & PUMP HOUSE ON LC SUMP, PANEL HOUSE
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Panel Room :- 'Designing (aestherically), and Constructing
RCC Frame structure of pump room with positive suction
/Negative Suction With Gantry structure (Min. Height
4.5 M) Up To 6.00 M (Plinth Level To Top Slab Beam
Bottom) Note : 1.Minimum 15% opening for ventilation
Should be Provided 2. Pump room Rolling shutter , door
1.00 and windows of aluminium section and window grill of 15.43 Sq Mt 17596.98
iron should be provided(Includedincost) 3.Plinth level of
pump house Should Be Min 1 Meter above GL. 4).Cost
does not Include Foundation For pumping Machinery -
For panel Room At Dairy Road RWPS
Excavation for well including removing and spreading the
excavated stuffs directed with all lead - 00.00 TO
mtr - In all sorts of soil and sofit murrum
---As Above---In hard murrum, boulders incl. macadam
---As Above---In soft rock and/or masonry in CM or L M or
2.03 ---As Above---1.50 to 3.00 mtr - Hard Rock 95.43 Cu Mt 776.25
2.04 ---As Above---3.00 to 4.50 mtr - Hard Rock 83.13 Cu Mt 794.65
2.05 ---As Above---4.50 to 6.00 mtr - Hard Rock 71.68 Cu Mt 813.05
2.06 ---As Above---6.00 to 7.500 mtr - Hard Rock 61.07 Cu Mt 834.90
2.07 ---As Above---7.50 to 9.00 mtr - Hard Rock 51.32 Cu Mt 860.20
Providing and casting in situ C.C. in grade M-15 (approx.
corresp. to prop. 1:2:4) (proportions as per mix design or
as per Table 9 of 1S456 2000 in masses by weigh batching
) using granite, quartzite trap metal of size 6 mm to
mm for RCC work,including scaffolding centering, forn
work, needle vibrated consolidation, curing comp. up to
meter deplh or hei;iht (excluding cost of reinforcement
and neat finishing) with centering and
shuttering/deshuttering etc. comp. for structure for olher
than water retaining Footing (without form work)
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
LC SUMP & PUMP HOUSE ON LC SUMP, PANEL HOUSE
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Providing and cast in situ C.C. in grade M-30 proportions
of ingredients as per mix design by weigh batching using
grariite, quartzite trap metal of size 12 mm to 20 mm and
or 6 mm to 12 mm including scaffolding centering
formwork, needle vibrated consolidation. curing and
hydraulic testing etc. complete (excluding cost of
reinforcement) with centering and
shuttering/deshuttering etc. comp. up to 6 meter height
/depth Av. G.L.for all water rataining structures - For Raft
4.01 ---As Above--- Vertical Wall 44.76 Cu Mt 9295.45
4.02 ---As Above--- For Beam 4.53 Cu Mt 9758.90
4.03 ---As Above--- For Column 5.73 Cu Mt 10714.55
Supplying cutting, bending, binding and placing in
position steel as per plan andesign and as per ISS
including cost of steel and binding wire for
5.00 reseNoirslstructures only including ift up to 6 meter 11.46 MT 90363.55
height or depth below G.L. for all diameters Do-CRS steel
all diameter Fe 500grade confirming to relevant I.S
Filling available excavated earth (excluding rock) in
6.00 trenches, plinth, sides of foundations consolidating each 274.95 Cu Mt 130.39
deposited layer by ramming and watering.
Brick work using common burnt clay building bricks
having crushing strength not less than 35 kg./Sq.Cm. in
foundation and plinth in Cement Mortar 1:5. (1- Cement :
7.00 5 -fine sand)(B) Conventional - Extra for brick work in 14.82 Cu Mt 4320.08
superstructure above plinth level upto floor two level (B)
Providing 15mm thick cement plaster in single coat on
Rough (Similar)side of single or half brick walls for interior
8.00 plastering upto floor two level and finished even and 236.58 Sq Mt 194.07
smooth in (i) Cement mortar 1:3 (1-cement:3-sand)
20mm thick sand faced cement plaster on walls
uptoheight 10 metres above ground level consisting of
12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand)
and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-
sand) etc. complete.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
LC SUMP & PUMP HOUSE ON LC SUMP, PANEL HOUSE
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Distempeing (Two coats) with oil bound washable
distemper of approved brand and manufacture and of
required shade on wall surfaces to give an even
shade,over and including a priming coat with alkali
resistance primer of approved brand after thoroughly
brushing the surface and other foreign matter and also
including preparing the surface even and sand parpered
Finishing wall with water proofing cement paint of on
wall surfaces (Two coats) to give an approved brand and
manufacture and of required shape even shade after
thoroughly brushing the surface to remove all dirt and
remains of loose powered materials
Providing and fixing rolling shutters of approved make
made of 80 mm wide M.S. laths inter-locked together
through their entire length and jointed together at the
ends by end locks mounted on specially designed pipe
12.00 shaft with bracket plates, guide channels and 5.00 Sq Mt 3503.41
arragements for inside and outside locking with push-pull
operation including the cost of hood cover and spring etc.
complete.(A) Shutters having width below 3.5 M
Providing and fixing 35 mm thick shutters for Doors,
windows and clerestory windows including Indian teak
wood frames 12 cm x 7 cm. size including anodized
13.00 alluminium fixtures and fastenings including primer coat 8.10 Sq Mt 4836.39
of approved quality and two coats of oil painting etc,
complete. (i) Fully Glazed.
Providing and fixing glazed louvered glass windows and
ventilators with teak wood frame 10cm. x 7cm. Size
including 3 coats of oil painting to wood work
etc.complete. For Ventilation
Providing and fixing M.S. round or square bars with
15.00 M.S.flats at required spacing in wooden frames of 216.00 Kg 69.22
windows and clerestory windows.
Providing and laying polished Kota stone slab floorin over
20mm (Average) thick base of cement mortar 1:6 (1-
cement : 6-coarse sand) or L.M. 1.1.5 laid over and
jointed with grey cement slurry including rubbing and
polishing etc. complete. (B) 30 mm thick
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
LC SUMP & PUMP HOUSE ON LC SUMP, PANEL HOUSE
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Providing & Fixing 50 cm wide MS Ladder fabricated form
MS Flats 10 mm x 75 mm With 20 mm dia steel bars
steps in double rows @30 c/c The include stays of 10 mm
x 50 mm flats fixed at 3 meter c/c with welding anchoring
and 3 coats anticorrosive paints MS Ladder With Safety
Providing and fixing 25 mm x 5.2 mm MS Railing with
three Horizontal raws and posts of angle ion of size
mm x 65 mm x 8 mm RCC 150 mm and 1.15 Meter Height
and placed at 1.85 mt c/c Including painting two coats
and anchorages in cc etc complete
Purchasing & supplying at site of works, with Railway
freight, loading, unloading, carting, etc. complete such as
joints, channels, angles, iron rails, etc - Do MS Flat
Various Thickness
Labour charges for lowering laying, erecting, fixing,
20.00 various size of M. S. section such as joints channel, angles 0.90 MT 170475.00
plates etc. complete :- Do With Fabrication
Providing fabricating and fixing /installing C.I. gates of size
21.00 as per design with operating handle etc.for by pass 302.50 Kg 94.30
arrangement with ISi Mark
Dewatering by pumping set of required capacity including
temporary platform carting pumping at site and fixing the
same in position including all accessories. and fuel and
labour etc. complete
Filling in foundation and plinth with murrum or selected
soil in layers of 20cm. thickness including watering,
ramming and consolidating etc. complete.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
LC SUMP & PUMP HOUSE ON LC SUMP, PANEL HOUSE
ITEM NO Quantity UNIT RATE AMOUNT Rs.
Earthwork for embankment including breaking clods,
dressingwith all lead and lift and including watering
rolling and consolidation of subgrade in layers at O.M.C.
24.00 to required dry density including filling the depression 800.00 Cu mt 169.44
which occur during theprocess using power roller 8T to
10T.(E) From Borrow area within 3.0KM. lead
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PUMPING MACHINERY WITH RISING MAIN FOR LECHATE COLLECTION
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Providing and supplying D. I. pipes for following nominal bore
diameter with internal cement mortar lining including au taxes.
Insurance, transportation. freight charges. octro1, inspection
1.00 charges, loading, unloading, conveyance lo departmenlal stores. 500.00 Rmt 1003.00
stocking etc. complete. (IS 8329-2000).
DI Pipe K-7 - 100 mm dia
DI SPECIAL Manufacture, Supply & Delivery of Ductile Iron Flange
socket spigot bends, tees, reducers or any other specials as per
BS-EN-545/1995 Class-A series Kl 2 suitable for use with D.I. Pipes
manufactured as per IS:8329/l 994delivery of specials is lo be
2.00 made lo GWSSB store or site of works any where in Gujarat 169.43 Kg 148.00
including all taxes, loading, unloading, carting, stacking,
insurance, inspection charges, octroi etc. complete. - 80 to
Providing and supplying C. I. Air valves of approved make &
quality of following class and diameter including all taxes,
insurance, transportation, freight charges, octroi, inspection
charges, loading, unloading, conveyance to departmental stores,
stacking etc. complete. S2 Type - 50 mm dia
Erection of airvalve riser by installing new M.S pipe of 6mm thick
and 3.2mt length with necessary fittings such as Flange of
appropriate size.nut bolls and embeded the pipe in R CC M:15
with offset of 10 cm around pipe with necessary steel etc
complete Dia or Air valve 50 mm & MS Pipe
Excavation for pipe line trenches incl. all safety provisions using
site rails and stacking excavated stuff up to a lead of 90 mts.
5.00 cleaning the site etc. complete for lifts and strata as specified.- 210.00 Cumt 102.35
upto 1.50 mtr - In all sorts of soil and soft murrum
---As Above--- In Hard murrum, boulders incl. macadam road.
---As Above---In soft rock and/or masonary in CM or LM or Lime
---As Above---In hard rock and/or in C.C. 1:2:4 or RCC with
5.03 blasting, breaking, chiseling or by chiseling/breaking only. 42.00 Cumt 427.80
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PUMPING MACHINERY WITH RISING MAIN FOR LECHATE COLLECTION
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Lowering, laying and jointing C. I. S & S Spun pipes suitable for
Tyton joints / Mortar lined D. I. Pipes of various classes with Cl /
MS specials of following diameters in proper position, grade and
alignment as directed by Engineer-in-charge including
hydraulic testing etc. comp. - 100 MM DIA
Lowering, laying and jointing in position following C. I. / D/F
Reflux valves, Butterfly valves, Sluice valves and Air valves
including cost of all labour, jointing material, including nut bolts
and giving satisfactory hydraulic testing, etc. complete (Rate for
all calss of valves) - 500 mm dia A.V.
Refilling the pipeline trenches incl. ramming, watering,
8.00 consolidating desposal of surplus stuff as directed within a radius 382.00 Cumt 25.30
Providing bedding incl. ramming, watering, consolidating etc.
Single Girder HOT Crane : Supply, installation, testing &
commissioning single girder type HOT crane with geared
travelling trolly with seven meter lift completewith manually
10.00 operated chain pulley block, long travel rail track (40 mm sq. bar), 1.00 Nos 188250.00
moving or cross girder, brake, safety device etc. &tested to 50%
overload. - 1 Tonne - 0 To 6 Mtr Span
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PUMPING MACHINERY WITH RISING MAIN FOR LECHATE COLLECTION
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Rate per KW for comprehensive work of S.I.T.C. of Electro-
mechanical components (Except Flowmeter & E.O.T.) (this is only
for the purpose of rough Estimation) - SITC work with
transformer incoming & outgoing panels, motor feeders with
suitable starter, HT/LT swich gear automatic power factor
correction panel, HT/LT distribution board, erthing, cable (control
& power), lighting fixtures including lamp, tubes, ets, pump
motor, sluice valve, non return valve/ DPCB, pump house piping
& fiting with metalic expansion bellow, EOT crane, sluice gate,
flow meter, exhaust fan, air conditioning, dewatering pump,
safety equipment etc complete excluding PLC base
instrumentation and control system. for VT pump / Sub pump
SUBMERSIBLE SEWAGE NON-CLOG VERTICAL PUMP :- Supply,
11.00 installation, testing & commissioning of sewage submersible, non 2.00 KW 48500.00
clog type suitable for working on three phase, 50 Hz ± 3%, 415 V
± 10%, AC supply, 1450 RPM synchronous speed with 3 core flat
copper cable from pump to starter panel with cable end
terminations, all supports, clamps, pipe fittings along with
mechanical seal, bearing bush, strainer etc. complete set &
following M.O.C:
Casing: CI, Impeller: SS CF8M, Wearing ring & Bearing bush:
Bronze, TC mechanical seal, CS / SS bearing, SS shaft with sleeve,
SS strainer & MS motor body. - Capacity: 17.36 LPS, Head:
Mtr, Motor :- 10 HP(1 working + 1 stand-by)
INTERNAL WIRING
Providing and erecting Mains with 1.1 KV grade FRLS PVC
insulated ISI marked stranded Copper conductor wire in following
type of pipe to be erected concealed in /flushed on wall/ceiling,
with 1.5 sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of following size (A)
With medium class Rigid PVC pipe and accessories (c) 3 wire
Providing and erecting Mains with 1.1 KV grade FRLS PVC
insulated ISI marked stranded Copper conductor wire in following
type of pipe to be erected concealed in /flushed on wall/ceiling,
13.00 with 1.5 sq. mm copper conductor FRLS PVC insulated stranded 80.00 Mtr 86.45
wire of green colour for earth continuity of following size (A)
With medium class Rigid PVC pipe and accessories (e) 4 wire
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PUMPING MACHINERY WITH RISING MAIN FOR LECHATE COLLECTION
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
SITC of Point wiring for Light / fan / Bell / Primary Point with 2nos.
1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI
marked 1.1 kv grade FRLS PVC insulated multistrand copper
wires, pipe to be erected concealed in flushed on wall /
ceiling, complete with 6A Tissino Type ISI marked flush type
switch / bell push & accessories erected on metal / PVC Box
covered with 3 mm thick PC (Polycarbonate) / Acrylic sheet
with necessary lamp holder / ceiling Rose / H. D. connector as
directed with medium class Rigid PVC pipe & accessories.
SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size
wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked
1.1 KV grade FRLS PVC insulated multistrand copper wires
with medium class Rigid PVC pipe and accessories to be erected
15.00 on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and 8.00 Nos 289.31
tissino type switch erected with earth continuity connection
erected on Metal / PVC box covered with 3 mm thick
PC(Polycarbonet) / Acrylic sheet.
SITC Point wiring for Individual Plug with & earth wire of
sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in below
type of pipe erected complete with Modular type switch & 5 pin
Plug erected on PVC / Metallic/Wooden box covered with
appropriate front plate modules erected on / in wall / ceiling as
per pipe erected with following type of accessories. [II] For 16A
Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db
board. (a) with medium class Rigid PVC pipe and accessories
erected flushed on wall/ceiling complete Cat-III
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PUMPING MACHINERY WITH RISING MAIN FOR LECHATE COLLECTION
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
LED LIGHT FIXTURES:
Supplying and erecting LED indoor fittings with LEDs of wattage
0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing
used as a heat sink shall be made of co-extruded polycarbonate
channel with diffuser part in needed opal finish with company
mark/name 160V to 270V, Power Factor more than 0.9, THD <
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.) (A) Tube Light with integral driver
(ii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet
Supplying and erecting led lamps with following wattage capacity
of 220 to 240 voltage, minimum 15000 burning hours life, 500 V
in built-surge protection,Polycarbonate diffuser, mounting
suitable for E14 / E27 / B22 lamp holders, pf >=
(A) LED Lamps integral type, with PC diffuser suitable LAMP
3W Lamp (For Panel room)
Supplying and erecting approved make Bracket fan of 230 volt,
A.C. 50 Cy/s., 400/450 mm sweep complete erected on wall or
with lead Cores and connections complete. Cat--II
SAFETY ACCESSORIES
Supplying & erecting carbon dioxide (CO2) fire extinguisher user
20.00 of following capacity with necessary clamps made from 50 x 6 8.00 Nos 8670.59
mm M.S. Flat with nut & bolts grouted in wall complete. [B] For
5.5 / 6.5 KG Capacity
Supplying stand first AID box with antiseptic cream, medicine for
use on wounds due burn, crepe bandage, gauge bandage,
medicated ready to use bandage (Band-aid) adhesive tape for
medicinal user, Scissors, anti-septic solution (Savlon or similar)
etc. (All above contents shall be of standard makes)
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PUMPING MACHINERY WITH RISING MAIN FOR LECHATE COLLECTION
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Providing and fixing printed instruction chart both in English and
Gujarati and duly framed with front glasses, for treatment of
person suffering from Electric shock with minimum 50"
diagonally size. ( For LT Room )
Supplying rubber matting of following thickness as per
IS:15652/IEC 61111 (b)4mm
LIASONING CHARGES FOR OBTAINING POWER / NOC:
Liasoning Charges for obtaining N.O.C from Electrical Inspector /
Statutory authority for Power / Ele. Installation. (Fees shall be
paid by tenderer for obtaining N.O.C. from Electrical Inspector /
Statutory authority on behalf of client and shall be reimbursed on
24.00 submission of orignial receipt to Client). Liasoning Charges shall 1.00 Ls 202000.00
include preparing required attasted documents & drawing for
obtaining NOC on behalf of client (Applicable Fees / deposits shall
be reimburse by Client).With 11 KV Power Cable
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND
MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
FIRE HYDRANT SYSTEM WITH FIRE TANK
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Supply, installation, testing and commissioning of 50 HP main
fire pump suitable for fire-fighting system. Complete with
motor, base frame, coupling, valves, fittings and required
Supply, installation and commissioning of 7.5 HP jockey pump
for maintaining line pressure in fire-fighting system. Complete
with motor, control connection, fittings and testing.
Supply, installation and commissioning of 50 HP diesel engine
driven fire pump for emergency fire operation. Complete with
diesel engine, pump set, fuel arrangement, battery, silencer and
Supply, installation, testing and commissioning of automatic
control panel suitable for operation of main pump, jockey pump
4.00 and diesel pump. Complete with starters, protection, indicators, 1.00 NOS 121957.50
wiring and required accessories.
Supply, Installation, Testing and Commissioning of 100 mm dia
Pressure Gauge of range 0 - 15 Kg /cm² conforming to IS -
having bourdon tube of stainless steel 310 in cast aluminium,
stove. enameled, black, weather proof case with outer, screwed
aluminium bezel and complete with necessary cock including
providing suitably painted angle iron support to the tube etc.as
per specification complete as required.
Supply, installation and commissioning of pressure switch
suitable for automatic operation of fire pumps. Complete with
connection to control panel, pressure setting, testing and
Supply, Installation, Testing and Commissioning of the following
sizes of flange jointed / screwed / welded, M.S.Pipes of Class B
(Heavy Duty ISI marked including accessories such as MS
bracket, U clamps with Anchor fasteners, tees / elbows /
7.00 reducers / couplings / unions / bends / flanges etc., laying and 300.00 MTR 2961.83
testing ,Installation with One coats of red oxide primer and two
coat of sinthetic enamal paint (P.O.Red.) etc. as per
specifications complete as required. -a) 150 mm dia
7.01 ---As Above---100 mm dia 12.00 MTR 2381.08
7.02 ---As Above---80 mm dia 30.00 MTR 1916.48
Providing, fixing,testing and commissioning of Anti corrosive
treatment for under ground lines with two coats of primer and
one coat of 4 mm thick readymade anticorrosive tap.(Under
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND
MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
FIRE HYDRANT SYSTEM WITH FIRE TANK
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Supply, installation, testing and commissioning of C.I. Butterfly
9.00 valve (PN 1.6) with flanges, nut bolts, gaskets complete as 10.00 NOS 6388.25
required. -a)150 mm dia
9.01 ---As Above---100 mm dia 1.00 NOS 5226.75
9.02 ---As Above---80 mm dia 1.00 NOS 4471.78
Supply, Installation, Testing and Commissioning of Cast iron Dual
plate Check valve (PN 1.6) a)150 mm dia
Supply, installation and testing of 150 mm dia Y-type strainer
suitable for fire pump suction/discharge line. Complete with
flanged connection, gasket, nuts and bolts.
Supply, installation, testing and commissioning of First Aid Hose
Reel equipment conforming to IS:884 comprising of hose reel
drum, 8 mm shut off nozzle, Rubber hose reel tubing as per IS:
12.00 444 of 25 mm dia x 30 mtr. long, painting, Manual fix type with 8.00 NOS 6039.80
fixing bracket, anchor fastener, bolts & nuts etc. complete as
required by Local Fire Authority
Providing,fixing,testing and commissioning of S.S metal single
headed ISI marked Oblique Pattern Hydrant Landing Valves as
per IS:5290 with 80mmdia flanged inlet & 63 mm dia female
outlet complete with gun metal cap.
Supply, installation, testing and commissioning of NON
Percolating Flexible Hose with S.S.Male & Female instantaneous
Type Coupling (RRL Type A) IS 636 , size ; 63mmDia X
Supply, installation, testing and commissioning of Standard S.S
Branch Pipe with Nozzle of 20mm nominal bore outlet as per IS
903 Suitable to fit with standard instantaeous type
63mmDia.Coupling.
Providing,fixing,testing and commissioning of Weather Proof
Standard Fire Hose Cabinet wall mounted type (450 mm X
mm X 250 mm deep)having single opening with locking
arrangment by allan key suitable for housing 1 no.of 15m long
hose pipes, 1no.Branch Pipe & nozzle spaner.(Double Door) FIRE
Providing, fixing AUTO GLOW photo luminescent Signage's as
per IS standard in Block / Small Letters on rigid sheet with
necessary wall or Ceiling fittings as Specified Sizes: b) Fire
Hydrant: 4" X 12"
Supply, installation, testing and commissioning of Carbon
Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to
IS:15683, with ISI marked / TAC approved fitted with required
accessories including wall suspension brackets.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND
MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
FIRE HYDRANT SYSTEM WITH FIRE TANK
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Supply, installation, testing and commissioning of Dry Chemical
Powder (ABC) type 6 kg confirm to IS:15683, with ISI marked /
TAC approved fitted with required accessories including wall
suspension brackets.
Supply, installation, testing and commissioning of Gun Metal Air
Release Valve with necessary fittings.size:25mm
Providing, fabricating, supplying and fixing required M.S. /
fabricated structural supports for fire-fighting equipment,
pipelines, valves and accessories including pipe supports, pump
base supports, valve supports, header supports, brackets,
clamps, frames, saddle supports, hangers, angles, channels,
flats, plates and other approved sections as per site
requirement. The work shall include cutting, welding, drilling,
grinding, alignment, fixing with anchor fasteners / foundation
bolts / nut bolts, proper leveling, surface cleaning, one coat of
red oxide primer and two coats of approved synthetic enamel /
fire red paint, including all materials, labour, tools, tackles,
loading, unloading, shifting, fixing and finishing complete as
directed by Engineer-in-Charge.
Obtaining necessary Fire Fighting NOC / Fire Safety Certificate
from the concerned Fire Authority / Municipal Fire Department
for the proposed/installed fire-fighting system, including
preparation and submission of required application forms, fire
layout drawings, equipment details, pump room details, water
tank details, compliance documents, coordination with the Fire
Department, arranging site inspection, attending
22.00 observations/compliances, resubmission if required and 1.00 JOB 209070.00
obtaining final approval/NOC from the competent authority. The
item includes all liaisoning, documentation, printing, submission,
follow-up, inspection coordination and completion in all
respects as directed by Engineer-in-Charge, excluding statutory
government fees if payable separately.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND
MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
FIRE HYDRANT SYSTEM WITH FIRE TANK
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Supply, laying, installation, testing and commissioning of
required electrical cabling for fire pump room equipment
including main fire pump, jockey pump, diesel pump auxiliaries,
control panel, starter panel, pressure switch, indicators,
alarm/control wiring and other related electrical accessories as
per approved electrical layout and site requirement. The work
shall include suitable size copper/aluminium PVC or XLPE
insulated armoured/unarmoured cables, cable laying through
tray/conduit/trench/sleeves, dressing, clamping, tagging,
ferruling, glanding, crimping of lugs, termination at panel and
motor ends, earthing connection, cable identification, continuity
test, insulation resistance test, phase sequence test and
commissioning complete with all glands, lugs, clamps, conduits,
junction boxes, hardware, labour, tools and accessories as
directed by Engineer-in-Charge.
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Excavation for foundation upto 1.5 m depth including sorting out
and stacking of useful materials and disposing off the excavated
stuff upto 50 Meter lead.(A) Loose or soft soil - By machinaries
1.01 ---As Above---(B) Dense or Hard soil 20.87 cum 149.67
1.02 ---As Above---(C) Hard Murrum 20.87 cum 256.12
1.03 ---As Above---(D) Soft rock not requiring Blasting 15.65 cum 263.08
Filling available excavated earth (excluding rock) in trenches.
plinth, sides of foundations etc. in layers not exceeding 20 cm. in
depth consolidating each disposited layer by ramming and
Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse
sand : 6- hand broken stone aggregates 40 mmnominal size) and
curing complete including cost of formwork in (A) Foundation and
Providing and laying controlled cement concrete M.250 and curing
complete including the cost of formwork but excluding the cost of
4.00 reinforcement for reinforced concrete work in (A) Foundations, 23.37 cum 4581.80
footings, Base of columns and Mass concrete.
Providing and laying controlled cement concrete M.250 and curing
complete including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (C)Slabs, landing,
shelves,Balconies, Lintels, Beams, Girders and Cantilever upto floor
Providing & Laying controlled cement concrete M-250 and curing
6.00 complete including the cost of formwork and reinforcement for 32.49 cum 6737.74
reinforced concrete work in Column (D) Columns, Pillars posts and
struts upto floor two level
Providing & Laying controlled cement concrete M-250 and curing
complete Including the cost of formwork and excluding the cost of
7.00 reinforcement for reinforced concrete work in Lintel (C) Slabs, 1.09 cum 6256.65
Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever
upto floor two level.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Providing & Laying controlled cement concrete M-250 and curing
complete Including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Chhajja (C) Slabs,
Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever
upto floor two level.
Providing and laying controlled cement concrete M.250 and curing
complete including the cost of formwork but excluding the cost of
9.00 reinforcement for reinforced concrete work in 101.78 cum 6940.65
(C)Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and
Cantilever upto floor two level.
Providing TMT Bar FE 415 reinforcement for R.C.C. work including
10.00 bending, binding and placing in position complete upto floor two 23425.70 kg 67.26
Brick work using common burnt clay building bricks having
crushing strength not less than 35 kg./Sq.Cm. in foundation and
plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)
Brick work using common burnt clay building bricks having
crushing strength not less than 35 kg./Sq.Cm. in foundation and
plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)
Half brick masonry in common brunt clay building bricks having
crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4
(1- Cement : 4 -coarse sand ) above plinth and upto floor two
level(B) Conventional
Providing 15mm thick cement plaster in single coat on Rough
(Similar)side of single or half brick walls for interior plastering upto
floor two level and finished even and smooth in (i) Cement mortar
1:3 (1-cement:3-sand)
20mm thick sand faced cement plaster on walls upto height
metres above ground level consisting of 12mm thick backing coat
15.00 of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of 446.38 sqm 335.65
C.M. 1:1 (1-cement : 1-sand etc. complete.
Providing and applying wall primer of approved brand on wall
surface to give an required shape even shade after thoroughly
brushing the surface to remove all dirt, and remains of loose
powdered materials.etc complete
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Finishing wall with weather proof exterior emulsion paint on wall
surface (two coats) to give an required shape even shade after
17.00 thoroughly brushing the surface to remove all dirt, and remains of 446.38 sqm 114.53
loose powdered materials.etc complete
Wall painting (two coats) with plastic emulsion paint of approved
brand and manufacture on undecorated wall surface to give an
18.00 even shade including throughly brushing the surface free from 1190.02 sqm 78.90
mortar droppings and other foreign matter and sand papered
Applying two coats of putty & two coats of primer of approved
brand and manufacture on new wall surface to give an even shade
19.00 including thoroughly brushing the surface free from mortar 1190.02 sqm 40.59
dropping and other foreign matter and sand papered smooth.
Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in
flooring treads of steps and landing laid on a bed of 12mm thick
cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush
pointing in white cement
Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in
skrting risers of steps and dedo on 10mm thick cement plaster 1:3
(1-cement : 3-coarse sand) and jointed with white cement slurry
Providing and laying Ceramic tiles 6mm thick in flooring treads of
steps and landing laid on a bed of 12mm thick cement mortar 1:3
(1-cement : 3-coarse sand ) finishing with flush pointing in white
Providing and layingCeramic tiles 6mm thick in skrting risers of
steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-
coarse sand) and jointed with white cement slurry
GRANITE SLAB (JAMBS) : Providing and laying 16 to18 mm thick
polished Granite stone slab machine cut in single piece in sill
and jambs or dedo laid on 10 mm thick cement mortar 1 : 3 (
cement : 3 coarse sand ) laid over and jointed withgrey
cement slurry incl. rubbing and polishing etc complete. for all
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Provoding and fixing flush door shutters, solid core construction
with frame of first class hardwood with cross board and face
veneer or plywood face panels, Including anodised alluminium butt
hinges with necessary screws. (B) Non-decorative type and block
board core anodised alluminium butt hinges in flush door shutters
(2) 35 mm thick with 2 no. of Latch (Tadi) as per sample approved
sectional flats, 2 no. S.S. Handle for door/ window 10 Cm size of
ASIS 304 Grade, (Heavy) Alluminium 25 cms length & 16mm dia &
1 no. S.S. Aldrop 20 Cm long of ASIS 304 Grade
for dubble shutter door: Providing and fixing 35 mm thick shutters
for Doors, windows and clear story windows including anodised
alluminium butt hinges with necessary screws. (A) Indian Teak
Wood(iii) Partly panelled and partly glazed with 2 no. of Latch
26.00 (Tadi) as per sample approved sectional flats, 4 no. S.S. Handle for 16.80 sqm 3421.45
door/ window 10 Cm size of ASIS 304 Grade, (Heavy) Alluminium
25 cms length & 16mm dia & 2 no. of S.S. Aldrop 20 Cm long of
Providing and fixing window having extruded aluminum Colour
Powder Coated section frame main outer size 95mm x 24mm x
1.17mm @ wt.of 0.738 Kg/mt,horizontal Three track member size
92mm x 31.75mm x1.30mm @ Wt.1.07 Kg/mt, vertical member of
size 92mmx 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with sliding
shutters of horizontal member size 40 mmx18mm
27.00 x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 34.56 sqm 1591.87
18mm x 1.29 mm @ wt.of 0.456Kg/mt with 5 mm thick
transparent bronze colour tinted float glass with powder coated
aluminum fittings and fixtures and transparent silicon sealant glass
fixing to frame as per details etc
Providing and fixing standared extruded of alluminium section of
size 63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour
28.00 Powder Coated alluminium frame for ventilation with 5 mm thick 1.62 sqm 1175.56
frosted glass as details etc complete for Ventilation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Providing and fixing wsh down water closet (European type, W.C.
Pan) with integral P or S trap including jointing the trap with soil
pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (A) vitreous
China Pattern :(i) in white colour Including Providing and fixing
Litres low level flushing cistern with a pair, of C.I. or Mild brackets,
complete with fittings such as lead valve less syphon, 15mm
nominal size brass ball valve with polythene float, C.P brass handle
unions and couplings for connections, with inlet, outlet and
overflow pipes, 40mm dia. porcelain enamelled flush bend
including cutting holes in walls and making good the same
connecting the flush bend with cistern and closet (A) Vitreous
China (I) In white colour & Providing and fixing in position with
clamps etc. 32mm nominal internal diameter galvanised steel tube
flush pipe for high level flushing cistern including connecting the
flush pipe with cistern and closet and making good the walls and
floors, Providing and fixing plastic seat and cover for wash down
water closer with C.P. brass hinges and rubber buffers. (B) Black
plastic seal and cover & Health Fauset Heavy duty with hook with
Providing and fixing washbasin with single hole for pillar tap with
C.I. or M.S. brackets painted white including sutting holes and
making good the same but excluding fittings.(A) Vitreous China:(ii)
Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. --
Including Providing and fixing pillar tap, capstan head, screw down
high pressure with screws, shanks and back nuts. (i) 15mm dia. &
Providing and fixing C.P. brass waste for washbasin or sink. (A)
Providing and fixing Urinal or approved quality including conecting
the Urinal with waste pipe , tap etc. complete.(A) White
earthenware flat back or corner type size 430mm x 260mm x
Providing and fixing cast iron (Spun) Nahni trap of the following
nominal diameter of self cleaning design witH C.I. screaed down or
32.00 higned grating including cost of cutting and making good the walls 7.00 each 604.49
and floor 100mm inlet and 50mm outlet.(C) 100mm dia
Providing and fixing 100mm sand cast iron grating for gully, floor
34.00 C.P. Bib cock 15 mm Heavy duty with cap 5.00 each 400.58
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Constructing brick masonry chamber for underground C.I.
Inspection chamber and bends with bricks having crushing
strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame
(Light duty) 455mm x 610mm intenal dimensions total weight of
cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)
and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement
:2- coarse sand :4-graded stone aggregate 20mm size) foundation
concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3
finished smooth with a floating coat of neat cement on walls and
bed concrete etc.Complete.(ii) Inside dimensions 500mm x
mm and 450mm deep for pipe line with one or two inlets
Providing laying and jointing in true line and level 15mm dia.
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the wall
36.00 with the help of clamp at every two metre C/C or shall be 40.00 RMT 72.65
concealed as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
Providing laying and jointing in true line and level 25mm dia.
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the wall
37.00 with the help of clamp at every two metre C/C or shall be 72.00 RMT 91.84
concealed as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials
Providing laying and jointing in true line and level 50mm dia.
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the wall
38.00 with the help of clamp at every two metre C/C or shall be 20.00 RMT 195.67
concealed as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Providing, laying and jointing in true line and level 160 diametre
U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain
and other end socketed with rubber ring, & fittings conforming to
ISI 14735-1999 of approved make for drainage system pipe line,
pipe shall be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using of PVC clamp of the size 160 mm
diametre x 210 mm length x 196 mm heigh at every 2000 mm
center to center or shall be concealed in walls as directed including
necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement
including cost of all materials.
Providing, laying and jointing in true line and level 110 diametre
U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain
and other end socketed with rubber ring, & fittings conforming to
ISI 14735-1999 of approved make for drainage system pipe line,
pipe shall be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using of PVC clamp of the size 110 mm
40.00 diametre x 149 mm length x 145 mm heigh at every 2000 mm 30.00 RMT 835.15
center to center or shall be concealed in walls as directed including
necessary fittings such as bends,shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement
including cost of all materials.
Providing erecting and fixing double coated ISI water tank of
41.00 required capacity each with all necessary fittings and connection 5000.00 litre 3.95
etc. complete on terrace
Providing and erecting Sheet Steel powder coated Vertical MCB
distribution board (VTPN) - flush / surface mounted double door
(IP54) fitted with copper insulated busbar, isolated neutral bar,
earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
suitable for 250 AMP TPN MCCB + RCCB as incomer and three
phase outgoing as per following .(The DBs should be used of same
company of MCB to be used)
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Providing and erecting Approved make RCCBs conforming to IS:
12640 and having sensitivity of 30 mA and Short Circuit withstand
capacity of 10 KA and suitable for operation on 3 phase and
neutral 415V,50Hz. having characteristic of quick action & tripping
43.00 with all advance feature & do not incorporate any electronic 1.00 Each 3040.10
component for following Max. rating erected as directed. cat III
(iii) 63 Amps. FP
CHEMICAL EARTHING SYSTEM
Supplying & erecting in earthpit of minimum bore dia. 225mm size
approved make Safe Earthing Electrode consisting Pipe-in-Pipe
Technology as per IS 3043-1987 made of corrosion free hot dipped
G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron
galvanising, Inner pipe dia of 40 mm having 200-250 Micron
galvanising, connection terminal dia of 14 mm with constant
ohmic value surrounded by highly conductive compound with high
charge dissipation suitable for following type of applications with
44.00 chamber and heavy duty cover.(approved make OEM has to 1.00 Each 7095.25
submit test certificate including value of earth resistane of
[B] For Electrical installation up to 11 KV located in other than
normal soil i.e. Soft Rock, Marshy Soil etc.
-Length of Pipe : 2 mtr
-Back filling Compound :1 no. Bag of 25 Kg.
(Each for body of Incomer, Panel & PDBs)
Providing and erecting required size HOT deep Galvanised iron
45.00 strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, 50.00 Kg 77.77
Motors etc. using proper clamp.
Providing and erecting HOT deep Galvanised iron strip wire 8 to
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm
(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated
multi strand copper wires up to 10 mtr length, in below type of
pipe erected with 6A Modular type switch and hum free EME
step type electronic fan regulator mounted and accessories with
earth continuity of following type erected on PVC /
47.00 Metallic/Wooden box, single mounting base frame covered with 14.00 Pt 767.60
textured/metallic/white front plate modules erected on / in wall /
ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed. (b) with 16 swg HGS metal conduit
pipe and accessories painted black erected flushed on wall/ceiling
complete CAT III
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of
sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length , in below
type of pipe erected with 6A Modular type switch / bell push &
accessories and earth continuity of following type, erected on PVC
/ Metallic/Wooden box, single mounting base frame covered with
48.00 textured/metallic/white front plate modules erected on / in wall / 64.00 Pt 578.73
ceiling as per pipe erected, with necessary Lamp holder/ceiling
rose / H.D.Connector as directed.
(b) with 16 swg(1.6 mm thick) HGS metal conduit pipe and
accessories painted black erected flushed on wall/ceiling complete
Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm
& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV
grade FRLS PVC insulated multi strand copper wires erected in
below type of pipe with 6A Modular type switches and following
type of accessories erected on PVC / Metallic/Wooden box, single
mounting base frame covered with textured / metallic/white front
49.00 plate modules erected on / in wall / ceiling as per pipe erected. 5.00 Pt 682.76
with necessary batten/angle holder or ceiling rose or
H.D.Connector as directed.
(b) with 16 swg HGS metal conduit pipe and accessories painted
black erected flushed on wall/ceiling complete
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated
multi strand copper wires up to 10 mtr length, in below type of
pipe erected complete with Modular type switch & 5 pin Plug
erected on PVC / Metallic/Wooden box covered with appropriate
front plate modules erected on / in wall / ceiling as per pipe
50.00 erected with following type of accessories. 5.00 Pt 942.33
[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with
2.5 sq.mm ( green) earthing wire from mcb d b board.
(b) with 16 swg HGS metal conduit pipe and accessories painted
black erected flushed on wall/ceiling complete Cat. III
Providing following type of Modular Type Accessories mounted
with PVC / metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate , modules
51.00 erected with necessary connections as per site situation directed 58.00 Each 151.50
by Engineer In charge.
(1)One No. SP 6 Amp. CAT-III
Providing following type of Modular Type Accessories mounted
with PVC / metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate , modules
erected with necessary connections as per site situation directed
by Engineer In charge.(2) One No 5 pin plug - Cat.III
52.01 ---As Above---(4) TV Co-axial Socket outlet Cat.III 2.00 Each 160.59
Providing following type of Modular Type Accessories mounted
with PVC / metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate , modules
53.00 erected with necessary connections as per site situation directed 14.00 Each 180.79
by Engineer In charge.
(9) 16 Amp. SP one way switch - Cat.III
Providing following type of Modular Type Accessories mounted
with PVC / metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate , modules
54.00 erected with necessary connections as per site situation directed 5.00 Each 199.98
by Engineer In charge. (10) 6/16Amp. Universal socket - Cat.III
---As Above---(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole
Modular MCB Switch
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated
ISI marked stranded Copper conductor wire in following type of
pipe to be erected concealed in /flushed on wall/ceiling, with
sq. mm copper conductor FRLS PVC insulated stranded wire of
55.00 green colour for earth continuity of following size 260.73 Mtr 148.47
(B) With 16 swg HGS metal conduit pipe and accessories painted
(c) 3 wire 1.5 sq. mm
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated
ISI marked stranded Copper conductor wire in following type of
pipe to be erected concealed in /flushed on wall/ceiling, with
sq. mm copper conductor FRLS PVC insulated stranded wire of
56.00 green colour for earth continuity of following size 90.00 Mtr 173.72
(B) With 16 swg HGS metal conduit pipe and accessories painted
black. (d) 3 wire 2.5 sq. mm
Supplying & erecting approved make low noise decorative exhaust
fan having square frame ABS body with inbuilt lowers & square
250mm with 1350 RPM Cat.II
Supplying and erecting LED indoor fittings with LEDs of wattage
Watt to 0.5 Watt assembled on single MCPCB, with housing used
as a heat sink shall be made of thick sheet Steel conforming to IS:
513/CRCA/aluminium pressure die cast powder coated and high
U.V. & corrosion resistance with diffuser housed in aluminium
casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed Mount Downlight
with provision for spring loaded mounting clips complete.IP20
(iii) 16-20 watts, Surge-2 KV - Cat-lll --18 watt
58.01 ---As Above---(iv) 22-24 watts, Surge-2 KV - Cat-lll --24 watt 15.00 Each 758.51
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Supplying and erecting LED indoor fittings with LEDs of wattage
0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing
used as a heat sink shall be made of thick sheet Steel conforming
to IS: 513/CRCA/aluminium pressure die cast powder coated and
high U.V. & corrosion resistance with diffuser housed in
aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
59.00 LED driver efficiency > 85 % 20.00 Each 1794.77
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.) (B) LED Panel Light with provision for
Plane front frame with translucent cover fixed to housing
complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV Cat-lll
Supplying and erecting LED indoor fittings with LEDs of wattage
Watt to 0.5 Watt assembled on single MCPCB, with housing used
as a heat sink shall be made of thick sheet Steel conforming to IS:
513/CRCA/ aluminium die cast powder coated and high U.V. &
corrosion resistance with diffuser with company mark/name
160V to 270V, Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.) (A) Tube Light with integral driver (iii)
18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet
Supplying and erecting led lamps with following wattage capacity
of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in
built-surge protection,Polycarbonate diffuser, mounting suitable
for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral
type, with PC diffuser suitable LAMP holder (iii) 10 to 15 watts
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Supply, Installation, Testing and Commissioning of suitable sweep,
BEE 5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC)
permanent ferrite magnet Motor, class of insulation: B, Rust free
nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing
provision, copper winding, Power factor not < 0.9, Service Value
(CMM/W) minimum 6.85, Air delivery minimum 215 CMM,
RPM,230v (tolerance as per IS : 374-2019), THD < 10%, compitible
62.00 with electronic regulator unit for Speed Control and all remaining 14.00 Each 2629.03
accessories including safety pin, nut bolts, washers, temperature
rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and
rectifier circuit with surge, over current and overload protection
50 Hz, Single phase AC Supply, earthing etc. Complete as required.[
Make shall be approved by Engineer in Charge] (A) 1200 mm
Supplying and erecting 19 / 20 mm. nominal bore Medium Class
M.S. Pipe down rod erected duly painted for fan complete with
proper insulation without leakage and earthing.
SAFETY ACCESSORIES
SITC of following safety accessories complete with necessary
fixing brackets, other accessories and tools etc. as required to
64.00 complete the job. 2.00 Each 8671.86
Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg
capacity with necessary clamps made from 50 x 6 mm M.S. Flat
with nut & bolts grouted in wall complete.
Supplying FIRE bucket round bottom of 9 litres capacity made out
of 24 gauge G.I. sheet with extra handle at bottom duly painted
white inside and Red out side with FIRE mark, filled with dry-sand
and kept on existing stand provided or hung on wall hook.
For Fire Station
Supplying and erecting floor mounting stand for keeping four nos.
of FIRE buckets comprising 1500 mm in length, 900 mm height
frame made out of 30mm X30 mm X 4 mm angle iron with cross
supports for legs, welded with 4 hooks and duly painted with one
coat of red lead and two coats of approved enamelled silver paint.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Supplying stand first AID box with anticeptic cream, medicine for
use on wounds due burn, crepe bandage, guage bandage,
medicated ready to use bandage (Band-aid) adhesive tape for
medicinal user, scissors, anticeptic solution (Savlon or similar) etc.
(All above contents shall be of standard makes)
Providing printed instruction (First Aid) Chart both in English and
Gujarati and duly framed with front glasses, for treatment of
person suffering from electric shock. (1no. For LT Room)
Supply and laying of 4 mm thickness, Rubber Matting as per as per
69.00 IS:15652/IEC 61111. (for LT & APFC etc. Panels) 5.00 Sqmtr 1027.17
Providing , erecting , fabricating the M.S. structure as per
requirement on site incorporating proper size of M.S.
angles,square,round, flats, bars, channels, sections complete with
cutting, welding, grinding & finishing duly painted with one coat of
red oxide with erection on site as per direction of engineer in
charge with necessary grouting, cementing, plastering & finishing
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION
AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED ADMIN BUILDING
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Providing and constructing septic tank of approximate size 3.36 m
x 1.36 m x 1.50 m deep with three internal compartments as per
drawing and as directed by Engineer-in-Charge, including
excavation for foundation up to required depth, disposal / stacking
of excavated material, refilling around structure with available
excavated earth in layers with watering and ramming, and carting
away surplus earth up to specified lead. The work shall include
providing and laying 150 mm thick cement concrete bed in 1:3:6
proportion, construction of side walls in conventional brick
masonry in cement mortar 1:5, internal partition / baffle walls in
71.00 brick masonry in cement mortar 1:4, providing proper inlet and 1.00 No. 31273.46
outlet openings and flow arrangement, 15 mm thick cement
plaster in cement mortar 1:4 on internal and exposed surfaces,
and providing 125 mm thick RCC top slab in M-25 grade concrete
with required reinforcement steel, centering, shuttering, curing
and finishing complete. The item shall include all materials, labour,
tools, tackles, scaffolding, curing, joint sealing, inlet-outlet pipe
connection, cleaning and completion of septic tank in all respects
as per specification and instruction of Engineer-in-Charge.
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PANEL ROOM, HT PANEL ROOM,& UG SUMP FOR C & D WASTE
ITEM DESCRIPTION
Quantity UNIT RATE AMOUNT Rs.
Panel Room: Designing (aesthetically} and constructing R.C.C frame structure of pump room with positive suction / Negative suction Without Gantry
structure (Upto 3.60 M)
1. Minimum 15 % opening for ventilation should be provided.
2. Pump room roll ing shutter, door and windows of aluminium section and window grill of iron should be provided (Included in Cost).
3. Plinth level of Pump house should be min.1 meter above GL.
4.Cost does not include foundation for pumping machinery.
HT Panel Room: Designing (aesthetically} and constructing R.C.C frame structure of pump room with positive suction / Negative suction Without Gantry
structure (Upto 3.60 M)
2.00 1. Minimum 15 % opening for ventilation should be provided. 20.00 sqm 10469.34
2. Pump room roll ing shutter, door and windows of aluminium section and window grill of iron should be provided (Included in Cost).
3. Plinth level of Pump house should be min.1 meter above GL.
4.Cost does not include foundation for pumping machinery.
Preparing structural design of RCC Under Ground / Partially under ground / above high ground level Reservoir of required capacity as per relevant
I.S.standards and constructing the same, including excavation in all types of soil strata (including rock) including shoring strutting if required, for loose
soil / to protect from collapse, casting 100 mm thick P.C.C. leveling course in M-15, Refilling the pit with proper soil and disposing of the surplus stuff at
all lead. Including cement plaster in CM 1:2 With approved water proofing compound to all over inside container (i.e walls. base, top slab/dome bottom,
etc, all) Including all types of labour and material charges of lowering, laying, erecting / hosting and jointing of pipe assembly to inlet, outlet overflow,
washout and bye pass arrangement as per hydraulic design. Providing and fixing accessories CI Manholes frame cover, water level indicator, adequate
cowl type ventilators or lantern type ventilator with stainless steel jail. RCC chambers for valves. Providing and applying three coats of cement paint /
snowcem to the out side face of structure. It also includes satisfactory water tightness test as per relevant I.S. code and painting name of scheme and
capacity on the tank as per direction of engineer in charge. List of Indian Standards for Design of GSR / SUMP:- The structural design of GSR shall be in
accordance with provisions relevant IS standard. (1) I.S. 3370, Part – 1 & 2 2009 or latest revision. (1.01) I.S. 3370, Part – 3 &4 1965 or latest revision.
(2) I.S. 456 – 2000 or latest revision. (3) I.S. 1893 – 2000 – 1984 or latest revision. (4) I.S. 875, Part – 1 to 3, 1987 or latest revision. General
Specifications:- (1) Water depth in container shall be adopted as per data of tender. Capacity shall be calculated excluding free board of the reservoir,
If water depth is not specified the suitable water depth / acceptable to field engineer in accordance with hydraulic (2) Shape of container (in plan)
specified by in data shall be adopted in absence circular shape shall be adopted. (3) Size shall be fixed as per availability of space (land area) at site /
acceptable engineer in charge. (4) Effect of overlapping of pressure bulbs on soil due near by structure and proposed sump should be considered.
(5) Care shall be taken that no damage should occur to nearby existing structure. Compensation shall be paid for the same by agency. (6) The
minimum concrete grade for RCC shall be M-30. (7) HYSD Fe 415 / 500 grade reinforcing bars confirming to I.S. 1786 / 1139 shall be considered in
design. CRS / TMT bars shall be provided. In saline atmosphere corrosion resistance stainless steel / HCR rebar shall be provided. Any other steel can be
used with approval of C.E./ in situation of non availability in market without extra cost. (8) Minimum size (or thickness) of various components shall
be provided as per tender criteria / specifications in absnce as per I.S./ Std. practice of G.W.S.S.B. Minimum dimensions specified for various
components in tender data / specifications shall be provided without fail. (9) The safe bearing capacity (SBC) shall be referred from SBC test report. In
absence of report it shall be referred from data sheet. If poor soil is found / water table is met with during excavation SBC shall be scientifically
ascertained and design shall be revise. No extra shall be paid for increase in quantity. (10) DI pipes and special shall only be used if type is not specified
3.00 in tender.(11) The rate shall include cost of dewatering during excavation making all arrangement when water table meets within depth. (12) The 1.00 No 531201.43
structure shall be designed properly to resist uplift due to ground water table specified in data or actual ground water table meets with during
excavation. If GWT / Uplift is mentioned in tender and during excavation it dose not meet 7.5% rate shall be reduced. (13) SS pipes railing shall be
provided over sump perifery when sump is greater or equal to 1.5 meter above ground level. (14A) RCC staircase /RCC steps should be provided from
GL to sump top slab based on the height of the GSR above/below the ground (14.b) RCC stair case with SS railing to be provided inside reservoir
container BB masonry stair cabin with MS safety door having locking arrangement to be provided for GSR, Sump and HGLR of capacity more than
lakhs litre with top slab if dome is constructed as top slab then provide minimum opening of 900mm x 2000mm with curbing and SS railing around (15)
Appearance of structure should be aesthetically good looking acceptable to authority. (16) Any charge in size, shape, depth below GL, height above GL,
water depth, F.B., size of member etc can be permitted in exceptional case due to site condition or hydraulic design requirement by C.E. No extra shall
be paid for change. (17) Any charge in data, dimensions, shape, water depth, reduction in size if permitted by competent authority and if it reduces
quantity then payment shall be reduced prorate. (18) When capacity of GSR / Sump is > 20 lakh liters two or suitable compartments acceptable to
executive engineer shall be designed and provided. (19) Agency shall engage qualified (at least graduate) consulting engineer for designing the
structure and he / she shall visit the site for guidance of work. (20) 75% part rate shall be payable for concrete, reinforcement and plastering items of
container until satisfactory hydraulic testing for water tightness is performed as per tender condition. Till the work shall be treated as incomplete.....
Above conditions / general specifications Sr. No. 1 to 20 are part and parcel of tender (contact) and prevail over other provisions in tender ---for Seismic
zone - III ------.As abovo rectangular sump without water table (Sub soil water level below foundation) - 100000 litre
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND
MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED STROM WATER
ITEM NO DESCRIPTION Quantity UNIT RATE AMOUNT Rs.
Providing and supplying ISi Standard R.C.C. pipes(of Sulphate Resisling
Cement) in standard lengths of following class and diameter suitable
for either collar joints or rubber ring joints Including oll taxes,
1.00 insurance, transportation, freight charges, octroi, inspection charges, 2150.00 Rmt 1433.00
loading, unloading. conveyance to departmental stores, stacking etc.
complete. (IS. 458/ 1989) Vertically Cast --- 450 mm Dia RCC NP3 -
Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following
diameters in proper position, grade and alignment at all level as
2.00 directed by Engineer-in-charge includingconveyance from stores to site 2150.00 Rmt 196.65
of work, labour, giving hydraulic testing asper ISi code. --450 mm Dia
RCC NP3 - 0.70Kg /Sq Cm
Excavation for pipe line trenches For Watersupply, Sewerage Line,
Manhole Etc. all With Shoring and Struting If Required as per required
Graddient and line Including Safety Provisions Using Site Rails and
3.00 Stacking Excavated Stuff Inlcuding Up To all Required lead Cleaning the 3193.26 Cu Mt 155.25
Site etc. Complete for all Lifts and Strata as specified -- upto 1.5 meter
depth ---In hard murrum, boulders incl. macadam road.
1.5 to 3 meter depth ---In soft rock and/or masonry in CM or L M or
Providing bedding incl. ramming, watering, levelling, consolidating etc.
Complete as per standard and instruction of enaineer incharge --As
above with selected excavated earth available near site -
Refilling the pipeline trenches incl. ramming, watering, consolidating
5.00 desposal of surplus stuff as directed within a radius of 3 km 2978.20 Cu Mt 25.30
Construction of Catch-pit chambers for Rain Water in brick or bela
stone masonry, locally available in C. M. 1 :6. Foundation concrete
mm thick In C. C. 1 :4:8 of trap metal si2e 25 mm 10 40 mm thick,
inside cement plaster in C. M, 1:3 and cement pointing outside in C. M.
1:3 and top cover of FRC Frame and Cover (35 T Capacity) of suitable
size (with key hole and required opening mechanism complete as given
size) Upto 1 Mt. depth from G. l. to pipe invert level incl. complete civil
6.00 works but excl. cost of excavation and refilling, with cast in situ FRC MH 86.00 Nos 8898.70
Frame and cover (excl. cost of Frame and cover) with 230 mm thick
brick masonry wall in C.M, 1:6 ----For 300 mm Dia :- Size of chamber
0.90 m x 0.90 m and 1.0 ml. deep With Cast in situ R.C.C. Slab 15cm
thick M-250 With Dubble jali Reinforcement With Fixing of Frame &
Cover ( Excluding Cost of Frame & Cover)
6.01 For 1 Mtr, Extra Depth 86.00 Nos 5150.85
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND
MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
PROPOSED STROM WATER
ITEM NO DESCRIPTION Quantity UNIT RATE AMOUNT Rs.
Providing and supplying including fixing of FRC catpit frame and cover
as per required with suitable opening, The FRC catchpit features a
robust frame with a size of 36” x 36” (900 x 900 mm), a thickness of 7”
(175 mm), and a weight of 159 kg. The cover measures 30” x 30” (750
x 750 mm) with a thickness of 4” (100 mm) and a weight of 117 kg. It
provides a clear opening of 24” x 24” (600 x 600 mm) to facilitate
access. The durable construction ensures reliability for heavy-duty
applications, meeting stringent performance standards including cost
of transportation, loading, unloading, fixing as per instruction given by
engineer in charge for suitable size of chamber size.
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE FOR NADIAD
MUNICIPAL CORPORATION
PLANT MACHINERY & FOOTING FOR MACHINERY FOR C & D WASTE
ITEM NO DESCRIPTION Quantity UNIT RATE AMOUNT Rs.
Supply, installation and commissioning of plain hopper with grizzly bars of 80 to
mm and vibro motor arrangement. Hopper capacity shall be approx. 12 m³ / 20 ton
1.00 with complete supporting structure and accessories. 1.00 NOS 754975.00
Supply and installation of vibrating grizzly feeder with 0–40 mm aperture made from
EN-8/MS or equivalent bars. Complete with motor, feeding arrangement and
commissioning, capacity approx. 25 TPH.
Supply, installation and commissioning of secondary double toggle jaw crusher with
36" x 8" feed chute and 60 HP motor. Crusher shall be suitable for max. feed size
3.00 mm and capacity approx. 50 TPH with grease lubrication. 1.00 NOS 2090700.00
Supply and installation of 800 mm wide main belt conveyor with direct drive motor,
gearbox and VFD for secondary crushing feeding. Complete with self-supporting
structure and all necessary accessories.
Supply and installation of 800 mm wide belt conveyor with direct drive motor, gearbox
and VFD for conveying secondary crushed outlet to 3-deck screen. Complete with self-
supporting structure and commissioning.
Supply and installation of over band type magnetic separator with operating height of
125 mm and magnetic strength of 2200 Gauss on surface. Size shall be approx.
6.00 mm x 600 mm x 150 mm complete with mounting and testing. 1.00 NOS 772397.50
Supply, installation and commissioning of 15 HP vacuum system suitable for dust
control and plant operation. Complete with motor, suction arrangement, ducting
connection and required accessories.
Supply and installation of modular polyurethane 3-deck sizing wet screen of approx.
1500 x 3000 mm with 5.5 kW x 2 vibrating motors. Complete with PU liners, spray
8.00 system, support structure, walkway and handrail, capacity approx. 100 TPH. 1.00 NOS 3310275.00
Supply and installation of 600 mm wide product conveyor with direct drive motor and
gearbox for Product-1 size +5 to -10 mm. Complete with self-supporting structure and
Supply and installation of 600 mm wide product conveyor with direct drive motor and
gearbox for Product-2 size +10 to -20 mm. Complete with belt, structure and all
Supply and installation of 600 mm wide product conveyor with direct drive motor and
gearbox for feeding to VSI / +20 mm material. Complete with self-supporting structure
and commissioning.
Supply and installation of 450 mm high chrome hydro cyclone for classification
application with apex and spigot arrangement. Suitable for 25–35% solids, pulp density
1.2 to 1.3 and cut size 120 to 150 microns.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE FOR NADIAD
MUNICIPAL CORPORATION
PLANT MACHINERY & FOOTING FOR MACHINERY FOR C & D WASTE
ITEM NO DESCRIPTION Quantity UNIT RATE AMOUNT Rs.
Supply and installation of 1200 x 2400 mm dewatering screen with modular
polyurethane panels and 5.5 kW x 2 vibrating motors. Complete with PU liners, spray
13.00 system, splash protection cover, support structure, walkway and handrail, capacity 1.00 NOS 2584337.50
approx. 25 TPH.
Supply and installation of 500 mm wide product conveyor for M-Sand with direct drive
motor and gearbox. Complete with belt, supporting structure and commissioning.
Supply and installation of 500 mm wide product conveyor for P-Sand with direct drive
motor and gearbox. Complete with belt, supporting structure and all accessories.
Supply, installation and commissioning of 20 HP slurry pump suitable for handling
abrasive slurry from wet screening and washing system. Complete with motor, base
frame, piping connection and accessories.
Supply and installation of high-rate thickener of approx. 4 m diameter with mild steel
fabricated tank, drive mechanism and support structure. Complete with quad rake
17.00 system, sludge conditioning arrangement and site assembly. 1.00 NOS 3019900.00
Supply and installation of automated dosing system with 2 HP motor for chemical
dosing in thickener/slurry treatment system. Complete with tank, pump, control
arrangement and commissioning.
Supply and installation of 10 HP sludge pump suitable for removal of settled
slurry/sludge from thickener. Complete with motor, base frame, piping connection and
Supply and installation of 12.5 HP centrifugal pump for clear water recirculation in wet
processing system. Complete with motor, coupling, base frame and necessary
Supply and installation of 7.5 HP submersible pump suitable for water lifting / transfer
application at plant site. Complete with cable, starter connection, piping and testing.
Supply, installation, testing and commissioning of electrical control panel suitable for
operation of plant motors and equipment. Complete with MCCB, starters/VFDs,
22.00 protection devices, wiring, indicators and required accessories. 1.00 NOS 1933897.50
Supply and installation of 10 HP water sprinkler canon fogger system for dust
suppression at plant area. Complete with motor, pump, nozzle arrangement, piping
connection and commissioning.
Supply and installation of suitable capacity transformer for power supply to the plant
and equipment. Complete with required protection, earthing, foundation support and
commissioning as per electrical norms.
Supply, installation, testing and commissioning of HT vacuum circuit breaker panel
suitable for transformer and plant power protection. Complete with relay, metering,
control wiring and safety accessories.
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE FOR NADIAD
MUNICIPAL CORPORATION
PLANT MACHINERY & FOOTING FOR MACHINERY FOR C & D WASTE
ITEM NO DESCRIPTION Quantity UNIT RATE AMOUNT Rs.
Supply and laying of required size electrical cables for plant machinery, panels, motors
and accessories. Complete with cable routing, termination, glands, lugs, trays/conduits
Providing and constructing required RCC footing and foundation work for all plant
machineries and equipment including hopper, vibrating feeder, jaw crusher,
conveyors, magnetic separator, vacuum system, wet screen, hydro cyclone,
dewatering screen, slurry pump, thickener, dosing system, sludge pump, clear water
pump, submersible pump, electrical panel, transformer, HT VCB and other associated
plant components as per approved layout and machinery load requirement. The work
shall include excavation in all types of soil, levelling and compacting of foundation bed,
providing PCC base, shuttering, reinforcement steel, anchor bolts/foundation bolts,
sleeves, pockets, grouting, RCC of required grade (higher than M25 grade), curing,
finishing, backfilling and disposal of surplus earth. The foundation shall be constructed
27.00 with proper alignment, level, vibration resistance and load-bearing capacity suitable 1.00 JOB 6969000.00
for continuous operation of crusher plant and wet processing machinery, including all
materials, labour, tools, tackles, machinery, testing and completion as directed by
Engineer-in-Charge.
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE
FOR NADIAD MUNICIPAL CORPORATION
RCC RAMP, PLATFORM, RETAINING WALL, BASE PLATFORM AT TIPPING FOR C & D WASTE
ITEM NO DESCRIPTION Quantity UNIT RATE AMOUNT Rs.
Excavation for foundation upto 1.5 m depth including sorting out and stacking of
1.00 useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense 658.32 Cum 149.67
Earthwork for embankment including breaking clods, dressing with all lead and lift
and including watering rolling and consolidation of subgrade in layers at O.M.C. to
2.00 required dry density including filling the depression which occur during the process 5746.50 Cum 152.51
using power roller 8T to 10T.(A) From Borrow pits within land width
Construction of 150mm thick Granular Sub Base (Grading I) by providing coarse
graded Black Trap material, mixing by machanical means / rotavator, spreading in
uniform layers with motor grader as per required slope and gradient on prepared
surface and compacting with vibratory roller at OMC to achieve the desired
compaction complete as per MORT & H clause
Providing & laying spreading and compacting 100mm thick WBM Grade - I of
B.T.M.C. metal 40 mm to 63 mm size (Crushed Metal) including using 29% (22+7%)
filler i.e. stone screeing 13.2 mm at the rate 0.27 Cumt. & stone dust at the rate
cumt. including spreading in uniform thickness, hand packing, rolling with vibratory
roller 8-10 tonnes in stages to proper grade and camber, applying and brooming
type of screning/binding materials to fill up the interstices of coarse aggregate,
watering and compacting to the required density.
Providing & laying spreading and compacting 150mm thick WBM Grade - II of
B.T.M.C. metal 25mm to 90mm size (hand brocken) including using 20% (13+7%)
filler i.e. stone screeing 13.2 mm at the rate 0.16 Cumt. & 0.08 stone dust including
spreading in uniform thickness hand packing rolling with vibratory roller8-10 tonnes
in stages to proper garde and cmaber applying and brooming required types of
screening/binding materials to fill up the interstices of coarse aggregate watering
and compacting to the required density.
Providing and filling in foundation with ordinary Cement concrete M-100 mix and
providing necessary vertical pin headers including formwork, vibrating, ramming and
curing complete.
Providing and casting in situ controlled cement concrete M-200 wearing coat laid as
directed dincluding tamping, vibrating, finishing, curing and fillingin joints with
bitumen complete For 150 mm thick
Providing & Laying M,S,Side Rail of road thickness with necessary nut bolt plates
fixing as per width, applying 4.50 kg/sq. mt. metallic hardner, applying plate
vibrator,electric or diesel in channel.Comp. with V.D. system (Trimix) by using the all
necessary equipments & materil & machinery,such as running screed vidrator on
prelaid M.S.channel for levelling vaccum pumps, floating & power trovelling & left
spacing for groove etc.Compl.
9.00 Supplying promoulded bituminous joint filler.(i) 12mm thick 0.30 Cum 553.79
Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- hand
10.00 broken stone aggregates 40 mmnominal size) and curing complete including cost of 74.88 Cum 3352.52
formwork in (A) Foundation and Plinth
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE
FOR NADIAD MUNICIPAL CORPORATION
RCC RAMP, PLATFORM, RETAINING WALL, BASE PLATFORM AT TIPPING FOR C & D WASTE
ITEM NO DESCRIPTION Quantity UNIT RATE AMOUNT Rs.
Providing and laying controlled cement concrete M.250 and curing complete
including the cost of formwork but excluding the cost of reinforcement for
reinforced concrete work in (A) Foundations, footings, Base of columns and Mass
Providing and laying controlled cement concrete M.250 and curing complete
including the cost of formwork (circular/ vertical) but excluding the cost of
reinforcement for reinforced concrete work in(B) Walls, from top of foundation level
upto floor two level
Providing and laying controlled cement concrete M.250 and curing complete
including the cost of formwork but excluding the cost of reinforcement for
reinforced concrete work in (C)Slabs, landing, shelves,Balconies, Lintels, Beams,
Girders and Cantilever upto floor two level.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding
and placing in position complete upto floor two level
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND MAINTENANCE
FOR NADIAD MUNICIPAL CORPORATION
O AND M FOR SANITARY LANDFILL FOR 1st YEAR
SR. NO. ITEM DESCRIPTION QUANTITY UNIT TENDER RATE AMOUNT
Providing and carrying out complete Operation & Maintenance (O&M)
of the Sanitary Landfill Facility for a period of One (1) years including
deployment, operation, maintenance, repair and replacement (as
required) of all landfill components, machinery, equipment, utilities,
manpower and associated infrastructure. The scope shall include
operation of weighbridge and weighbridge room, security arrangements,
site administration, waste reception and recording, spreading, leveling
and compaction of municipal solid waste using Tata Hitachi excavator,
JCB 3DX, tractors with water tankers, dumpers and other required
machinery; daily, intermediate and final cover application; operation and
maintenance of landfill cells, HDPE liner system, leachate collection and
conveyance network, leachate storage tanks and treatment facilities,
storm water drainage system, gas venting/collection system, internal
roads, green belt and plantation area, water supply system, fire-fighting
1.00 arrangements and all ancillary structures. The work shall also include 1.00 Year 15965448.00
provision of skilled and unskilled manpower such as manager,
supervisor, security guards, weighbridge operator, excavator/JCB
operators, tractor drivers, dumper drivers and other necessary staff;
supply and consumption of fuel, lubricants, electricity, insurance,
statutory compliances, environmental monitoring, laboratory testing,
record keeping, reporting, housekeeping, vector control, dust
suppression, odor control, maintenance of machinery and vehicles,
replacement of worn-out parts, emergency response measures and all
incidental works required for efficient, safe and environmentally
compliant operation of the sanitary landfill facility as per SWM Rules
2016, CPCB guidelines, CPHEEO Manual and directions of the Engineer-
in-Charge, complete in all respects. For 1st year
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
NADIAD MUNICIPAL CORPORATION - NADIAD
BID DOCUMENTS FOR CONSTRUCTION WORK OF C & D WASTE PLANT AND SANITORY LANDFILL FACILITY WITH OPERATION AND
MAINTENANCE FOR NADIAD MUNICIPAL CORPORATION
O AND M FOR CONSTRUCTION AND DEMOLITION WORK FOR 1st YEAR
SR. NO. ITEM DESCRIPTION QUANTITY UNIT TENDER RATE AMOUNT
Providing and carrying out complete Operation & Maintenance (O&M) of
the Construction and Demolition (C&D) Waste Processing Facility for a
period of One (1) years including operation, deployment, maintenance,
repair and replacement of all machinery, equipment, vehicles, utilities,
manpower and associated infrastructure required for collection,
transportation, receipt, segregation, processing, storage and disposal of
C&D waste. The scope shall include operation of JCB 3DX, tractors,
dumpers and all associated equipment for loading, unloading, handling,
stacking and transportation of C&D waste; segregation of concrete, bricks,
masonry, stone, soil, sand, metals, wood, plastics and other recyclable
materials; crushing, screening, processing and production of recycled
aggregates and reusable construction materials; maintenance of
processing plant, conveyors, crushers, screens, storage yards, internal
roads, drainage system, boundary wall, gates, weighbridge, office
1.00 buildings, utility services and all ancillary facilities. The work shall include 1.00 Year 13267044.00
deployment of manager, supervisor, skilled and unskilled labour, JCB
operators, tractor drivers, dumper drivers and all necessary manpower;
provision of fuel, lubricants, electricity, water, insurance, safety equipment
and statutory compliances; routine, preventive and breakdown
maintenance of vehicles, machinery and plant components; dust
suppression, housekeeping, environmental monitoring, record keeping,
reporting, fire protection measures, health and safety management,
replacement of worn-out parts and consumables, disposal of non-
recyclable residues at authorized locations and all incidental works
necessary for continuous, efficient and environmentally compliant
operation of the C&D Waste Processing Facility in accordance with
Construction & Demolition Waste Management Rules, 2016, CPCB
Guidelines, applicable standards and directions of the Engineer-in-Charge,
complete in all respects. For 1st year
Consulting Civil Engineer
DD (OPC) PVT LTD
City Engineer Chief Accountant
Nadiad Municipal Corporation Nadiad Municipal Corporation
Deputy Minicipal Commissioner Deputy Minicipal Commissioner
Nadiad Municipal Corporation Nadiad Municipal Corporation
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01.00._TENDER NOTICE.pdf
02.00_SCHEDULE B.pdf
03.00._DRAWINGS.pdf
04.00._O AND M.pdf
05.01._BUILDING SPECIFICATON.pdf
05.02._ROAD SPECIFICATION.pdf
05.03._A_P-1_GENERAL TECHNICAL SPECIFICATION _ELECTRICAL -1-33.pdf
05.03._A_P-2_GENERAL TECHNICAL SPECIFICATION _ELECTRICAL -34-63.pdf
05.04._GENERAL SPECIFICATION FOR FIRE FIGHT.pdf
05.05_.GENERAL TECHNICAL SPECIFICATION FOR CIVIL WORKS.pdf
05.06_.GENERAL TECHNICAL SPECIFICATION FOR E AND M WORK.pdf
05.07_.ITEM WISE TECHNICAL SPECIFICATION.pdf
06.00._MAKE LIST.pdf
07.00._DMO 2799 11-Mar-2024 662.pdf
07.00._GR TESTING.pdf
Download all tender documents and submit your bid