Formation of earthwork in filling including protection wall for kaccha road and brick soling road at various spots a. From the house of Pintu Rudra to the house of Panchali Chowdhury b. From the house of Pradip Lal Das to the house of Sunil Dey c. Fr

Without dewatering. Earthwork in excavation for structures as per drawing and MofRD technical specifications Clause 305. 1, including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. Ordinary Soil Upto 3m depth.

Filling in foudation trenches as per drawing & MoRD technical specification Clause 305.3.9 and 1200 1. Sand filling

Providing concrete for plain concrete (using jhama brick aggregate) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement) P.C.C grade M 10 (using jhama brick aggregate) Normal mix 1:3.6 (Hand mixing)

Brick mesonary work in cement mortar in sub-structure complete except pointing and plastering. as per drawing & MoRD technical specification clauses 602, 603, 604, 1202 & 1204 In 1:4 cement mortar

Plastering with cement mortar (1:4) 12 mm thick on brickwork/CC work including finising coat of net cement punning with 2.75kg of cement per square meter in substructure as por MoRD technical specification Clauses 613.4 & 1204.

Construction of embankment with approved material obtained from borrow pits with a lift Jupto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per MoRD Technical Specification Clause 303.1.

Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412.