WBPHED/EE/RS/e49/2024-2025

Amount

Optimizer SS1- single static 1 bay push pull: Providing. Supplying and installation of 150 9001:2015, 150 50001:2018, ISO 45001:2018, ISO 14001:2015 (all (SO must be From NABCB accredited agency), BIFMA (members up), AIOTA, Green guard (by UL) indoor air quality certify manufacturer, factory made Optimizer SS) (2047H x 1200W x 400D mm) as per approved drawing and design/ specification of Engineer In-Charge, Overall Dimensions of SSI - Single Static iBove-Push Pull Type (LC Fittings) shall be 1200mm(W) 400mm(D) 2083mra(H), The Construction shall be rigid knock down made out of 0.5 thick CRCA steel conforming to 15 513, Each body shall have a main unit plus add on units (1,2,3,4.51, Final finish consists of epoxy polyester powder coating of approved colour&shock with a Dry Film Thickness of minimum 40 microns. Shelf construction made of 0,7 this: CRCA stop conforming to 18: 513 Gr.D or DD.Uniformly distributed load capacity of 100 Kg. Undercarriage shall have construction in welded frame CRCA sheet 2 math conforming to 18:513. The movements of the system shall be Push pull configuration (TYPE PI/TYPE-P2): Movement of units achieved by pushing or pulling "Chep plastic handle (mounted on each double & single movable units) & rigidly fixed at suitable height on body side. v. Each movable body also has an under structure with 4 nos olantifiction ball bearings for rolling on charncls, The twin moving body, ie, TM, has 4 cos, of bearing firedhorizontally to restrict the lateral movement of the body on rail while the single moving beds, ic, SL, body hat 2 nos of a special anti-tilt boarding assembly fitted to the under structure which not only restricts lateral movement but also prevents St. from toppling. A Ceutraliacd Inching arrangement is provided dough Locking Stiffener mounted onto back of Single Last unit. Le SL body. It gets locked into the carrousels when all the units are brought together, and the lock is tamed, The Rocas handle lock is of make & placed nt a height of 940mm from ground level. The locking stiffener is made of 1.2 mm the conforming to 15.513. Hingal doors have Recessed Die cast Handic cum lack with 3 way locking through a kuer& shooting bolts The nuts & bolts are galvanized blackodized/Zn Plated. Label Holder. It is an aluminium extrusion of izogth 396mm for LD/SD and 796mm for TD, fined on 10 front cover of body. The Paper is 300GSM matt nuilky white sticker paper, to be inserted into the aluminium extruson. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted, The bodies including shelves have to be given antirust surface treatment & should be powder coated with cpoxy polyester powder, I should involve an & step treatnient consisting of Hot water rinse, Knock of degreasing, degrea sing, cold water rinse, phospharing, cold water nose, and passivation & dry off oven iscatment Final Finish has to consist of epoxy polyester ponder coating of approved colour & shade with a Dry Film Thickness of minimum 40 microns. The testing of paing must be done for various physical & chemical properties as per IS 101 The material then, has to be oven bakod with a controlled temperature of 180 dag. C to 200 deg. C. Optimizers have to be with Fire Retardant powder coating and this Fue retardant powder should pass the Flammability Test (UL-94 Grade Vo). Limiting Oxygen Index Test and Surface Spread of Flame Test (B5 476 part 7) from ICT (Institute of Chemical Technologs)

Optimizer SL1 Single last One Bay Push pull: Preceding Suppling sod installation of ISO 9001:2015, ISO 50001 2018, ISO 43001:2011, ISO 14001:2015 (all ISO must be from NABCB accredited agency) BIFMA (membership), AIOTA, Green guard (by UL), indoor air quality certified manufacturer, factors made Optimizer SLI (2047H 1200W 4000 mm) as per approved drawing and design specification of Engineer In-Charge Overall Dimensions of SLI Single last Flav Push Pull Type (UC Finings) shall be (200mm(W)x400mm(02106mm(H) The Construction shall be rigid knock down made Ost of 0.8 thick CRCA conforming to 15 513 Each body shall have a main unit plus add on units (1.2.3.4.5) Final finish consists of peavey polyester powder coating of appendedcolour& shade with a Dry Film Thickness of minimum 40 microns Shelf construction made of 07 da CRCA stock conforming to IS: 513 Grade or DD.Uniformly distributed load capacity of 100 Kg Undermanage shall have struct ion in welded frame CRCA sheet 2 munchkin conforming to 15:313. The movements of the system stail be Push pull configuration (TV PE-PL/TYPE-P2) Marchmont of units achieved by pushing or pulling the plastic handed (mounted on Each double & single movable UNA) &agedly fived at suitable height on body side. Each movable body also has an underreacted with 4 nos of antifriction hall bearings for rolling on chances. The twin meting body, ia. TM, has 4 pose, of bearing fitted perinatally mane bytowelmavens of the body on rail while the single moving body, ie St body has 1 nos, of a special anti-ti bearing ascribe famed to the andrestructure which not only restricts lateral mover sent but also preterits St. from sopping. A Centrelink locking arrangement provided through Locking Stiffener mounted onto back of Single Last unit, e. St, body I get locked into the channels when all the unis are brought together, and the lock is tumed. The Recess handle lock is of maka at al of 40mm free ground loved. The locking stiffener is made of 1.2 men då conforming to 15.5/2. have Recond Die om Helle cum lock with 3 way locking through a kiver&thooting bolts. The nuts & bolts are galvanizedblack dined/Zo Plated Label Holder it is an alumicium extrusion of length 796mm for LD/SD and 796mm for TD. Eted an front cover of bod The Paper is 300GSM van my white sticker paper, to be inserted the aluminationTheength of paper is kimesler LD/SD and 194nm for TD. Over that a iransparent plastic of comesponding length af 150-200 thenestbeertust. The bodics including shelves have to be given antirust surface treatment & should be powder coat walisporopolysar ponder a should involve an & step somcatcommsting of hot water rinsz. Koocs of degreasing degreasing one phosphati cold war nesc, and panisation& dry off aveaacutimentFussl finish has to consist of per of approved colour thuốc with a Dry FiênThicknes of 40 rona / The ting of pa bedow for vanuspimsical& chemical properties sapor 15. 101 The maturval then, hat to be oven by tha 180 C 200 dng. C. Opams have to be with Fire Ratsudane powder coatingand this Fisca Post IUL Grade Vol. Lasiting On Tit and Surface Spread of Flame Tost 105 47 part from ACT of ChomcatTochnolog

Optimizer twin mobile 1 Bay push pull type: Providing supplying and installation of ISO 9001:2015, ISO 50001-2018,ISO 45001-2018, ISO 14001-2015,(all ISO must be from NABCB accredited agency , BIFMA MEMBERSHIP,AIOTA, GREEN GUARD by UL,indoor air quality certified manufacturers, factory made optimizer, solid back panel,2047H X 1200W X 800D MM as per approved drawing and design specification of Engineer in Charge overall dimension of TM1 : TWIN Mobile 1 bay push pull type uc fittings handle shall be 915 mm W X 762mmD X 2180mmH. The construction shall be rigid knock down made out of 0 s thick CRCA conforming to each body shall have a main unit plus add on units. Finish shall be Epoxy polyester bowler coated thickness of 40 microns. Shelf construction shall be made from CRCA steel 0.7 mm thick uniform Arly disbursed load capacity is 60 kg . Undercarriage shall have construction in welded frame CRCA sheet 2 mm thick conforming to IS 513, The movements of the systems shall be push pull configurations TYPE P1 : TYPE P2, movement with 4 nos of antifriction s of units achieved by pushing or pulling 'C type 'plastic handle (mounted on each double & single movable units) & rigidly fixed at suitable height on body side. each movable body also has an under structureantifriction ball bearings for rolling on channels. The twin moving body TM has 4 nos of bearing fitted horizontally to restrict the lateral movement of the body on while the single moving body SL body have 2 nos special anti tilt bearing assembly fitted to the under structure which not only restricts lateral movements but also prevents Sl from toppling. A centralized locking arrangements is provided through locking stiffener mounted onto back of single last units body it gets locked into the channels when all the units are brought together and the lock is turned. The recess handle lock is of make & placed at a height of 940mmfrom ground level. The locking stiffener is made of 1.2 mm thick conforming to IS : 513 hinged doors have e Recessed Die cast handle cum lock 3 way locking through way level & shooting bolts The nuts & bolts are galvanized balkanized ZN plated label holder. It is an aluminium extrusion of length 396mmfor LD SD and 796mm for TD tilted on to front cover of body the paper is 300 GSM man milky white sticker paper to be inserted into the aluminium extorsion . The length of paper is 394 mm for LD SD and 794 mm TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted. When the last unit is twin movable hinged doors are provided for the end bodies so in this case locking stiffener is mounted onto twin unit. the bodies including shelves have to be given antirust surface treatment & should be powder coated with epoxy polyester powder . It should involve an 8 step treatment consisting of hot water rinse knock of degreasing cold water rinse phosphating cold water rinse and passivation & dry off oven treatment . Final finish has to consist of epoxy polyester powder coating of approved colour and shade with a dry film thickness of minimum 40 microns . The testing of paint must be done for various physical and chemical properties as per is 101the material then has to be oven bucked with a controlled temperature of 180 degree c to 200 degree c optimizers have to be with fire retardant powder coating and this fire retardant powder should pass the Flammability Test .

Optimizer RAIL 1600 mm: Providing supplying and installation of ISO 9001:2015, ISO 50001-2018,ISO 45001-2018, ISO 14001-2015,(all ISO must be from NABCB accredited agency , BIFMA MEMBERSHIP,AIOTA, GREEN GUARD by UL,indoor air quality certified manufacturers, factory made optimizer Rail as per approved drawing and design specification engineer -In - Charge. It consists of C section 2 mm thick HR sheet & Square 2mmX 2mm thick ERW tube- both connected by screws . Prior to the prompting to the gmde channels with the help of Rawl plug & screw ensure the ground level. The rail channels are lengths of 1600 mm

Optimizer Rail 2400 mm: Providing supplying and installation of ISO 9001:2015, ISO 50001-2018,ISO 45001-2018, ISO 14001-2015,(all ISO must be from NABCB accredited agency , BIFMA MEMBERSHIP,AIOTA, GREEN GUARD by UL,indoor air quality certified manufacturers, factory made optimizer Rail as per approved drawing and design specification engineer -In - Charge. It consists of C section 2 mm thick HR sheet & Square 2mmX 2mm thick ERW tube- both connected by screws . Prior to the prompting to the gmde channels with the help of Rawl plug & screw ensure the ground level. The rail channels are lengths of 2400 mm

Optimizer Rail 800 mm: Providing supplying and installation of ISO 9001:2015, ISO 50001-2018,ISO 45001-2018, ISO 14001-2015,(all ISO must be from NABCB accredited agency , BIFMA MEMBERSHIP,AIOTA, GREEN GUARD by UL,indoor air quality certified manufacturers, factory made optimizer Rail as per approved drawing and design specification engineer -In - Charge. It consists of C section 2 mm thick HR sheet & Square 2mmX 2mm thick ERW tube- both connected by screws . Prior to the prompting to the gmde channels with the help of Rawl plug & screw ensure the ground level. The rail channels are lengths of 800 mm

DESIGN-M (BID ID -6220128)

M/S EASTMAN (BID ID -6220021)