Work related to strengthening/renovation and repair of sheds made for parking of vehicles and rest of the sheds made for parking of SCART and other vehicles in Commissioner Camp /Camp Office

First class Brick Work in 1:6 in cement and c/sand mortar in foundation and plinth including supply of all materials, labour and T&P etc required for proper completion of work. Asper S.I.No.303 (Excluding cost of GST)

Brick Work in 1:4 cement and course sand morter inclduing supply of all material , labour, T&P etc. required for proper completion of work. (as per SI.No. 307) (Excluding cost of GST)

15 mm cement plaster on rough side of single or half brick wall of mix : 1 : 6 (1 cement : 6 Coarse sand) CPWD DSR 2023- 13.5.2) (Excluding cost of GST)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete As per DSR No. 13.80 (Excluding cost of GST)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm CPWD DSR 2023- 13.48.1) (Excluding cost of GST)

25mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone laid in panels finished with 3 mm flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 75 mm thick base concrete consisting of cement, local sand and brick balast 40 mm gauge in the proportion of 1:4:8 and removing any over lapping morter at joint of pannels if any and giving them a uniform finish including supply of all materials, labour and T&P etc. required for proper completion of the work. as per sand fo 1.25FM. (As per PWD. S.I. No 600) (Excluding cost of GST)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. (Excluding cost of GST)

Painting or varnishing work in small areas or new wood work with one coat upto one square metre of ready mixed priming paint and one coat of approed superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should fonfirm the ISI no. 103-1950 (M.S. works) (Excluding cost of GST)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Excluding cost of GST)

Providing and laying cement concrete 4:2:1 of not less than strength of M150 (20 mm nominal size grite) raito 2 approved coarse sand ratio 1 Cement and curring complete including cost of form work in floors. As SoR No. 279b (Excluding cost of GST)