GENERAL-AM-Annual Maintenance works of BAKKIKAYAM Regulator in Vengara Grama Panchayath. Malappuram Dt for the Financial year 2024-25-General Civil Work

Amount

Appendix-A Annual Maintanance of Regulator

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

OD30080/2024-2025:Engaging divers for removal of wooden logs,silt etc at upstream side of regulator shutters as per the departmental officers at site.

OD28369/2024-2025:Engaging skilled labourers (Man mazdoor) for assisting divers for removal of wooden logs,silt etc at upstream of the departmental officers at site.

OD28340/2024-2025:Engaging Technically skilled Operator for operating Generator and also for hoisting and lowering mechanical shutters to regulate the water level in the reservoir

OD28365/2024-2025:Engaging watchman for the surveillance of the entire project as per the direction of the departmental officers at site

OD16153/2024-2025:Supplying diesel for the Generator at site for hoisting and lowering of mechanical shutters including all cost and conveyance etc complete

OD26423/2024-2025:Charges for maintenance works of Diesel Generator of Bakkikayam Regulator including changing of oil and filters including cost of materials , labour charges etc. complete (on call )

OD28323/2024-2025:Supplying and Fixing of standard size gauge scales- in comply with IS 4048-1994, shall be of sturdy construction with non-corrosive material,colour white background, black graduation and red for decimal sizes ( prior to coating), width-100mm to 200 mm, thickness:1.5 to 2.5 mm,all including cost and conveyance of all materials, labour charges,hire charges and all other incidental charges etc.complete as per the direction of the departmental officers at site.

OD31546/2024-2025:Supplying and fixing fabricated warning board of size 100x50 cm, Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, welding fixing in position and finishing with approved steel primer, yellow color painting, etc. And printed letters in Malayalam with black colour, for relevant information and fixing it including cost and conveyance of all materials and all labour charges etc. complete as per the directions of the departmental officers at site

OD31171/2024-2025:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface including Scaffolding upto 10m height for painting including cost of material , cleaning, chipping and removing the dirt particle of the concrete slab with wire brush and water, labour charges for filling the bug holes,cracks,joints etc. etc. complete as per the direction of departmental officers at site (Refer spec :14.66.1 & 14.43)

OD33059/2024-2025:Painting all the exposed surfaces of the gate, embedded parts, Platform, and handrail with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns, so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool.

Appendix -B- Civil work

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Appendix c- Information board

8.6a:Direction and Place Identification Signs with size more than 0.9 sqm size Board (Type XI) Providing and fixing of direction and place identification retro-reflectorised sign with 10 years warranty manufactured as per IRC :67 made of ASTM D 4956-09 Type XI micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on suitably designed GI pipe pole not less than 50mm NB , 2 Nos. confirming to IS 1239, firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 mm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

Mohammed Ansad PP (BID ID -2184174)

Bidder Name

Mohamed Fazal

Mohammed Ansad PP