REPAIR TO ROAD , ROAD FURNITURE AND PAINTING AT ICGS VERAVAL UNDER GE (I) CG PORBANDAR

Schedule 'A'

Demolition of cement concreteground floor and paving not exc 15cm thickness(below or above ground level) all as specified and directed by Engineer-in-Charge

Material and labor for cement concrete work in Pavement/hardstanding of flexural strength 40kg/square centimetre in field using 400kg of cement per cubic metre ,thickness of concrete 25cm or less all as specified and directed

Material and labor for forming 20mm thick expansion joint in 200mm thick concrete slab filled with pre bituminius filler and top 30mm primed and sealed with sealing compound grade "A" all as specified and directed

Material and labor for forming 20mm thick contraction (dummy) joint in 65mm deep x 10mm wide filled with sealing compound grade "A" all as specified and directed

Material & Labour for painting lines,dashes,arrows, letters,marking of 2 mm thick & width exceeding 10cm or not exceeding 15 cm on new surface or previously treated road surface with hot applied retro reflective thermoplastic road marking paint(white/golden yellow) conforming to MORTH (clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160 degree Centigrade including cleaning and drying the existing road surfaces to ensure dust,oil grease and moisture free surfaces before applying paint complete all as specified.

Supply and fixingof dual-directional solar-powered Cat Eyes, size 100 mm x 100 mm x 20 mm with a minimum 50 mm anchoring shank, featuring a high-pressure die-cast aluminium alloy shell confirming to IP68 water and dust ingress protection. The unit shall be equipped with an integrated high-efficiency monocrystalline solar panel (minimum 2.4V/0.3W), active energy storage via an eco-friendly Ni-MH or high-capacity Ni-Cd rechargeable battery (1.2V, minimum 1200 mAh), and automatic dusk-to-dawn ambient light sensor operation. Illumination shall be provided by a total of 6 ultra-bright blinking/flashing LEDs (3 pieces on each side) of Super-Bright Red colour with a viewing distance exceeding 800 meters, ensuring a minimum backup time of 48 to 72 hours of continuous nocturnal operations upon full charge complete all as specified and directed by Engineer-in-Charge

Supply and fixing of dual-directional solar-powered Cat Eyes, size 125 mm x 125 mm x 25 mm with a minimum 65 mm anchoring shank, featuring a high-pressure die-cast aluminium alloy shell confirming to IP68 water and dust ingress protection. The unit shall be equipped with an integrated high-efficiency monocrystalline solar panel (minimum 2.4V/0.3W), active energy storage via an eco-friendly Ni-MH or high-capacity Ni-Cd rechargeable battery (1.2V, minimum 1200 mAh), and automatic dusk-to-dawn ambient light sensor operation. Illumination shall be provided by a total of 6 ultra-bright blinking/flashing LEDs (3 pieces on each side) of Super-Bright Red colour with a viewing distance exceeding 800 meters, ensuring a minimum backup time of 48 to 72 hours of continuous nocturnal operations upon full charge complete all as specified and directed by Engineer-in-Charge

Material and labor for preparation of old painted plastered or concrete surfaces of any description not otherwise described over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of high-visibility metal tubular road delineator posts, featuring a round body engineered from premium Acrylonitrile Butadiene Styrene (ABS) fitted with 2 Nos. 65 mm diameter retro-reflective PMMA (Polymethyl Methacrylate) lenses. The body shall be securely mounted over a 45 mm or 50 mm nominal diameter mild steel (MS) heavy-gauge pipe of 600 mm structural height. The pipe shall be protected against weathering by an anti-corrosion chemical treatment and finished with pure polyester powder coating. The post must be wrapped with a thermoplastic elastomer retro-reflective sleeve or three distinct bands of high-intensity Type-IV/Prismatic retro-reflective sheeting (Green, Red, and Yellow colours) of required width, tightly wrapped around the core and enclosed inside a durable anti-theft galvanized steel wire mesh (jaali) for complete protection against vandalism and unauthorized removal and excavation of soil/pavement, and rigidly embedding the base of the pipe post inside a solid block of PCC mix 1:2:4 (nominal mix using 20 mm graded stone aggregate) of cross-sectional dimension 150 mm x 150 mm x 300 mm deep (Type B1 concrete), cured, finished flush with the ground level, and completed all as per manufacturer's instructions and as directed by the Engineer-in-Charge