ADDN ALTN TO VARIOUS BUILDINGS IN STN HQ COMPLEX VARIOUS ROOMS STORES AT AIR FORCE SCHOOL AND ASSOCIATED B AND R WORKS AT AF STN SAMANA UNDER GE (AF) JAMNAGAR NO 1

Amount

M&L for complete removal of existing treatment on roof including brooming down or steel wire brushing, scraping down smoke soot, mouls, moss and efflorescent salts and treating oil and greasy spots complete all as specified and directed

M&L for PCC in roof pading, coving,filling and mass concrete type B-o, 1:2;4 (using 12.5mm graded stone aggregate) complete all as specified and directed

M&L for plastering / screed bed, 10mm thick on concrete surface in CM 1:4, finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacture instruction complete all as specified and directed Note WPC will be measured & paid separately.

Supply only integral water proofing chemical @ 200ml/Bag of cement complete all as specified and directed. Make : Fosroc, Dr Fixit or equivalent

M&L for water proofing treatment to RCC roof slab all as specified below and as directed:- (a) Apply one coat of glass fibre base bitumen felt primer, grade 2 @ 0.25 Kg/Sqm. (b) Laying APP based ploymeric membrane 3mm thick, minimum wt 3.00 kg/Sqm reinforced with polyester non-wove fabric (weighing not less than 150gms/Sqm ) laid on primed roofs & flashing by forced application using Butane torch, and sealing all joints (c) Apply a coat of aluminium paint @ 0.10 ltr/Sqm.

S&F in repair aluminium three track Powder coated (of any color, thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed by Engineer-in-Charge

S& F aluminium powder coated (of any color & thickness of powder coating not less than 50 micron) frame for door,window and ventilators or similar wk with one or more rebate inc joining cleat for fixing in repair complete all as specified and directed by Engineer-in-Charge

S&F aluminium door shutters powder coated (of any color, thickness of powder coating not less than 50 micron), alumimnium section weighing min. 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc in repair complete all as specified.directed by Engineer - in - Charge.

S&F in repairs aluminium window and ventilator shutters or aluminium partition, powder coated (of any colour, thickness of powder coating not less than 50 micron),fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed by Engineer-in-Charge

S&F sheet glass 4 mm thick ordinary quality(plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square n.exc. 0.5 sqm in each pane complete all as specified & directed.

S&F sheet glass 4 mm thick ordinary quality (plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square exc. 0.5 sqm in each pane complete all as specified & directed.

S&F in repairs Door closer hydraulically regulated, designation No. 2, aluminium(die cast) body, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified & directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F 100 mm size mild steel body Mortise lock, vertical type, with 4 brass liver,in repair fixed to aluminium door complete.

S & F in repair floor door stopper 140mm size (overall length of cover plate) of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge

Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets ,frame and assesories etc.

S&F 600x600mmx4mm thick false ceiling of Non esbestos fibre cement building boards (E Board) and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm . The aluminium frame work will be supported on side wall with the use of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, complete all as specified directed by the Engineer-in-Charge.

S&F Gypsum Board 12mm thick in ceiling fixed with screw, any sunk or raised moulding as per manufacturers instructions and applying two coat of OBD over two coat of wall care putty.

S&f Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified

Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to a distance exc 1.5 km but n.exc 2 Km complete all as spd and directed.

M&L Rendering 10mm thick in CM 1:4 on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing for skirting/dado etc complete all as spd and directed

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as spd and directed

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as spd and directed

M&L for Non skid, coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd and directed

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/dado /skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd and directed

M&L Green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window/door cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as spd and directed

M&L 15 -18mm thick granite stone slab of any type (cut, table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms and like , bedded & jointed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as spd and directed

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spd and directed

S&F 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spd and directed

S&F 32mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F 15mm size angular Stop valves, cast copper alloy, CP,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spd and directed

S&F fancy type chromium plated, long shank & cup (concealed type) 15mm bore dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spd and directed

S&F 15mm dia size Bib taps, CP,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as spd and directed

S&F in repair 15 mm bore, swan neck, pillar taps cast copper alloy capaston head CP, screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes fixed complete all as spd and directed

S&F in repair vitreous china wash basin, white, Table top, size 540 mm x 360 mm x 115mm fixed on and including cast iron cantilever bracket as required,32 mm dia brass waste coupling and including waste fitting and union complete all as specified and directed by Engineer-in-Charge. ( Make Cera - Colmax or equivalent as specified )

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as spd and directed

S&F in repair vitreous china two piece wall hung extended EWC white with CI 'P' or 'S' trap incl attached cistern, water closet seat cover of plastic, etc.complete incl necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge. ( Make Cera - Calibre or equivalent as specified)

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer-in-Charge

S&F in repair 10 Litre capacity PVC symphonic action type flushing cistern,(ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as spd and directed

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as spd and directed

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimumweight 60gms) incl. all accessories / fittings etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs 15mm dia size two way angle valve, brass chromium plated, fancy type complete all as specified and as directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as spd and directed

S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge

S&F in repair chromium plated grating 100mm size with or w/o waste hole complete all as specified and directed

S & F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as spd and directed

S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S&F in repair Soap dispenser completes all as specified and as directed by Engineer-in-Charge

Dismantling and disconnecting of existing cast iron or reinforced concrete drain pipes, jointed in cement mortar 75/100 mm dia bore fixed to wall,laid in trenches etc complete all as specified and directed Engineer-in-Charge

S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed on walls including clamps, complete all as specified and directed

S & F 75 mm bore of pipe PVC (SWR) bends of any radius fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge

S & F 75 mm bore of pipe PVC (SWR) bends of any radius fixed to PVC pipes provided with access door in repair complete all as specified and directed by Engineer-in-Charge

M&L for 75 mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement in repair complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes with access door in repair complete all as specified and directed by Engineer-in-Charge

S & F 110 mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and directed by Engineer-in-Charge

S & F 110 mm bore of pipe PVC vent cowl fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge

S&F in repairs sinks made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including supply and fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as spd and directed

S & F in repair Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as spd and directed

S&F in repair Towel Ring of CP fixed with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) of any descrition such as Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L Reinforcement cement concrete type B1 1:2:4 using 20mm aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves, chajja, lintel /Bands and similar wks including any type of formwork /moulds etccomplete all as specified and directed by Engineer-in-Charge

S&F mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge

S&F mild steel TMT bar 6mm to 8mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia or as in stirrups complete all as specified and directed by Engineer-in-Charge

Demolition of brick / stone / PCC block masonry / RCC Jalli build/fixed in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

M&L for providing precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone or PCC block walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 km but n.exc 2 Km, complete all as spd and directed(Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L for 2 coats of wall care putty over plastered/old decorated surface of wall/ceiling including rubbing with sand paper to prepare the surface even and smooth complete all as spd and directed

M&L for rendering 15 mm thick on stone masonary/brick / concrete block surface of walls in cement mortar 1:6 complete all as spd and directed

M &L 2 coats of oil bound distemper on new surfaces of walls including preparation to distempering to match with existing work complete all as specified and directed

M & L rendering 10 mm thick in patches on fair faces of brick or concrete surfaces in CM 1:3 as on ceiling, facia roof projection etc complete all as specified and directed

M &L 2 coats of oil bound distemper on new surfaces of ceiling including preparation to distempering to match with existing work complete all as specified and directed

M&L for rendering 15 mm thick on stone masonary/brick / concrete block surface of walls in cement mortar 1:4 finished even and smooth complete all as spd and directed (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) and in any pattern with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces walls/fins/facia/soffit etc complete all as specified and as directed. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M & L for preparing old decorated wall /soffit/chajja/fins etc. surfaces, plastered or unplastered and applying two coats of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives complete all as specified and as directed by Engr-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L for Preparation of old distempered / decorated surfaces of walls including washing, rubbing down and stopping holes, trading oil and greasy spots and applying Two coat of Distemper oil emulsion complete all as specified and as directed by Engr-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L for Preparation of old distempered / decorated surfaces of ceiling including washing, rubbing down and stopping holes, trading oil and greasy spots and applying one coat of Distemper oil emulsion complete all as specified and as directed by Engr-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L for prepration of old painted steel or Iron surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint etc. all as specified and as directed by Engineer-In-Charge.

Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed Engineer-in-Charge

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge

S&F 30mm thick. flush shutter, solid core construction with particle board core and ply woood face panels commercial type on both side complete all as specified and directed Engineer-in-Charge

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.

S&F 125 mm in size aluminium handles cast type anodized complete all as specified & directed.

S & F 250 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engineer-in-Charge

S&F in repair Curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified & directed.

M&L for preparing new surfaces of wood or wood based materials of any description not other wise described over 10 CM width or girth new or previously un treated wooden surfaces and applying one coat of pink primer and two coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted wooden surfaces, exc 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15cm thickness below or above ground level, all as specified and as directed.

M&L for providing cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in fdn filling and mass concrete etc complete.

M&L for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in floor / hard standing/Path ,etc complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.(Fe-410- W(Gde E-250) quality B )complete all as specified and directed by Engineer-in-Charge

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge

S&F Plates (Plain or chequered) channels,squarecut or notched (ordinary and counter sunk) forming holes, w/o any attachment conforming to FE-290( Gde-E-165 ) complete all as specified and directed Engineer-in-Charge

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified & directed

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed

Dismantling of plain or corrugated steel sheeting any gauge, thickness, from roof coverings etc complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply & Fix 06 mm thick plain, multicavity poly carbonate sheet (coloured) in roof covering, fixed with and including aluminium fillets at joints and aluminium angles at the end, fixed with self drilled screws and standard fittings, fixtures and accessories in repair complete all as specified and as per manufacturer's instructions.

Dismantling Stone slabs and tiles of any description or thickness in floors,aprons etc laid, bedded and pointed in any mortar including removal of debries from the premise complete all as spd and directed.

M&L for outdoor coloured vitrified paving tiles, of size 300 mm x 300 mm x 8 to 10 mm thick as in floors etc laid over and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for Rubber moulded chequered cement concrete tile with grey cement and pigment (of approved tint) of size 30 cm x 30 cm x 25 mm thick , set, jointed and pointed in neat cement slurry complete.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including laying over 25mm thick sand cushioning , including dismantling and taking down/out old unserviceable paver block complete all as specified and as directed by Engr-in-Charge.

Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removing to store complete all as spd and directed

S&F 500 ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed

S&F in repair 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F CPVC ball valves for 32 mm outer dia pipecomplete all as specified and directed by Engineer-in-Charge

Taking down carefully any aluminum /copper point wiring (light,fan,socket or power) complete including conduits/casing caping including fixture and fittings such as switches,ceiling rose pendants,regulator sockets etc removing material/debris for taking credit and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed.

Taking down carefully sub main wiring complete of any type (batten / surface conduit) complete and making good disturbed surfaces complete all as specified and directed.

Taking down carefully by unscrewing from fitting and fixtures as switches,ceiling roses, pendents,regulators,bells, sockets, tube light fittings,DB,MCB etc, for schedule of credit

Taking down carefully by unscrewing from fitting and fixtures as switches,ceiling roses, pendents,regulators,bells, sockets, tube light fittings,DB,MCB etc, for reuse at site or carrying to the store( To be found measured only when found serviceable in all rspect for reuse) and refixing all as specified and as directed

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 4.0 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including casing and caping complete with all accessories alongwith provn of 4.0 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to tbe BD with proper size of lugs/thimbles etc comnplete all as specified and directed by Engr -in charge

M & L for point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including super deluxe casing caping (not less than 25 mm wide) with all its accessories like bends, tees, suitable module PVC boxes o etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire and plastic laminated PVC box with cover plate as specified and directed by Engr -in charge:

One light / fan / exhaust fan point controlled by one, one way switch.

One 3 pin socket out let 5 Amps on the independent board.

One 3 pin socket out let 5 Amps on same board with other switches.

One bell point control by one push button on independent board with cable 1.5 Sqmm size.

All as per item No 123 about but with 4.0 sqmm multistranded copper multistranded conductor FRLS cable with 4 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board as specified and directed by Engr -in charge:

S & F switch Piano 5 Amps, flush button type, SP, one way, 230 Volts complete as specified and directed by Engr -in charge:. Make - Make - Anchor or equivalent as approved.

S & F switch bell push 5 Amps, flush button type, SP, one way, 230 Volts and 230/250 Volts complete as specified and directed by Engr -in charge: Make - Anchor or equivalent

S & F Switch socket combination multipurpose 5 pin 5 Amps, flush type, 230 / 250 Volts complete as specified and directed by Engr -in charge:. Make Make - Anchor or equivalent

S & F switch socket combination ,6 pin ,15 amps, flush type, multipurpose, 230 / 250 volts complete as specified and directed by Engr -in charge:. Make - Make - Anchor or equivalentapproved.

S & F bell Ding Dong type AC 230 Volts, complete all as specified and directed by Engr -in charge

M&L for Ceiling rose, 3 terminal polycarbonate body 6 Amps, 250 volts AC, including connecting complete as specified and directed by Engr -in charge:.

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6.0 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including casing and caping complete with all accessories alongwith provn of 6.0 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to tbe BD with proper size of lugs/thimbles etc comnplete all as specified and directed by Engr -in charge

Supply and fix sheet metal enclosure MCB DB, single pole and neutral, 8 ways double door 240 volts having 200 Amps rated bus bar with balnking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connectionsas directed by engineer in charge

Supply and fix sheet metal enclosure MCB DB, triple pole and neutral, 4 ways double door 415 volts having 200 Amps double door rated bus bar with blanking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connectionsas directed by engineer in charge

Supply and fix MCB single pole 240 volts 6 to 32 Amps (to be fixed as per load requirement) 220V with 'C' curve complete as including all connectionsas directed by engineer in charge

Supply and fix MCB Single pole Neutral 240 volts 40- 63 Amps (to be fixed as per load requirement)220V with 'C' curve complete as including all connectionsas directed by engineer in charge

Supply and fix MCB’s triple pole & neutral, 63 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and fix stepped type electronic fan regulator flush type, 230 V, including connecting complete.

Supply & Fix energy efficient LED tube light fitting with built in LED & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

S&F energy efficient LED tube light fitting with built in LED & integral LED drive 10 watt, channel housing & diffuser of length 600 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

Supply and fix in repair Energy efficient recessed mounted LED luminaries 36 watt suitable for 600 x 600 mm grid ceiling along with flat diffuser along with constant current electronic driver all as specified and directed by Engg-in-charge .

S&F in repair Recessed mounted LED round panel light of 15 watt, 6500 K of including all fitting, fixture complete.

Disconnecting and taking out split AC ,Window AC ,outdoor/indoor unit carefully without causing any damage or leakage deposit to Store and re-install and testing the same as directed by Engr in charge

Material and labour for earthing in replacement complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel wire 4 mm dia by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, light grade, and 15 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion.

Supply and fix oscillating and tilting wall mounted fan 450 mm sweep ,1350 RPM mm sweep AC, 240 volts, metal body, fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable complete. Make :crompton SS storm 2

supply and Fix metal body exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with complete including making hole in wall good the disturbed surfaces complete all as directed by EIC at site

supply and Fix plastic body exhaust fans AC single phase 230/ 240 V of size 300 mm sweep omplete including making hole in wall good the disturbed surfaces complete all as directed by EIC at site

Disconnecting and Taking out 25/50/ mm GI pipe along with its necessary connectioins from trenches, foundation, pit, hard standing tling/wall etc

Excavation in trenches not exc 1.5 m wide and n.exc 1.5 m in depth for laying pipe line etc not exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft / loose soil all as specified.

Returning filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick using suitable excavated soil all as directed

Removing excavated soil to a distance n exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point.

S&F in repair 25mm size gun metal gate valves ISI marked with iron wheel head screwed both ends for iron pipe and fixed complete.

S&F 25 mm size gun metal gate valves ISI marked with iron wheel head screwed both ends for iron pipe and fixed complete including taking down old valve complete.

Supply and fix / laid in trenches/Wall 25 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends / elbow, tee, union,flange etc complete and connecting to water supply pipe line complete all as specified and as directed by Engineer-in-Charge.

Excavation in post holes in hard/ dense soil (or similar holes) each n. exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil removing surplus soil to a distance n exc 50m complete all specified and as directed.

Supply and fix / Laid in trenches 50 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends / elbow, tee, union flange,etc complete and connecting to water supply pipe line all as specified and as directed by Engineer-in-Charge.

Jagdamba Engineering (BID ID -3172320)

M/s SK Traders (BID ID -3172251)

Nitesh Enterprise (BID ID -3166045)