providing steel railing, water pipe connection for upstream and downstream turffs and replacement of left and right galleries water pipe at Beas Dam.

Amount

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. CSR 606

Cold twisted detormed (Ribbed/Tor Steel) Bars (Fe 500 grade as per IS 1786-2008), for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. CSR18.18

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth CSR 10.16

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. CSR 9.2

12.5 mm thick cement plaster 1:4 CSR 15.9

Providing and fixing Stainless Steel pipe and fitting of grade A ISI-304 as per IS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in- charge. (The pipe length inserted in the fitting shall not be measured for payment) 42.70 mm outer dia Pipe CSR 18.55(e)

Providing and fixing Stainless Steel pipe and fitting of grade A ISI-304 as per IS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in- charge. (The pipe length inserted in the fitting shall not be measured for payment) 15.88 mm outer dia Pipe CSR 18.55(a)

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B- Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti-corrosive bitumastic paint, testing, cutting, threading Inside building complete. 32mm i/d CSR 28.35(d)

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.32mm i/d G.I. Union CSR 28.40(d)

Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.32mm i/d Gun Metal peet valve heavy pattern. CSR 28.43(d)

Dismanteling Adjoining removal of G.I. pipe lines, specials, valves and fitting complete in all respects.80 mm internal diameter pipe line in left gallery CSR 28.63(h)

Dismanteling Adjoining removal of G.I. pipe lines, specials, valves and fitting complete in all respects.65 mm internal diameter pipe line in right gallery CSR 28.63(g)

Dismanteling Adjoining removal of G.I. pipe lines, specials, valves and fitting complete in all respects.50 mm internal diameter pipe line in left & right gallery CSR 28.63(f)

Providing and laying joining fixing testing ISI Marked G>I pipes (as per IS 1239) B-class, including cost of specials such as tees, bends, sockets elbow etc. cutiing threadings and testing in trenches in the ground complete.80mm i/d in left gallery CSR 28.36(h)

Providing and laying joining fixing testing ISI Marked G>I pipes (as per IS 1239) B-class, including cost of specials such as tees, bends, sockets elbow etc. cutiing threadings and testing in trenches in the ground complete.65mm i/d in right gallery CSR 28.36(g)

Providing and laying joining fixing testing ISI Marked G>I pipes (as per IS 1239) B-class, including cost of specials such as tees, bends, sockets elbow etc. cutiing threadings and testing in trenches in the ground complete.50mm i/d in left & right galleryCSR 28.36(f)

Providing and laying joining fixing testing ISI Marked G>I pipes (as per IS 1239) B-class, including cost of specials such as tees, bends, sockets elbow etc. cutiing threadings and testing in trenches in the ground complete.25mm i/d CSR 28.36€

Providing fixing and jointing G.I Union couplings of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respects.80mm i/d G.I. Union in left gallery CSR 28.40(h)

Providing fixing and jointing G.I Union couplings of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respects.65mm i/d in right gallery CSR 28.40(g)

Providing fixing and jointing G.I Union couplings of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respects.50mm i/d in left & right gallery CSR 28.40(f)

Providing fixing and jointing ISI marked gun metal peet valves as per IS 778 with hand wheels on G.I. Pipe lines laid in the ground or inside building including all carriages complete.80mm i/d Gun metal peet valve heavy pattern. In left gallery CSR 28.43(h)

Providing fixing and jointing ISI marked gun metal peet valves as per IS 778 with hand wheels on G.I. Pipe lines laid in the ground or inside building including all carriages complete.65mm i/d Gun metal peet valve heavy pattern. In right gallery CSR 28.43(g)

Providing fixing and jointing ISI marked gun metal peet valves as per IS 778 with hand wheels on G.I. Pipe lines laid in the ground or inside building including all carriages complete.50mm i/d Gun metal peet valve heavy pattern. In left & right gallery CSR 28.43(f)

Providing fixing and jointing ISI marked gun metal peet valves as per IS 778 with hand wheels on G.I. Pipe lines laid in the ground or inside building including all carriages complete.25mm i/d Gun metal peet valve heavy pattern. In left & right gallery CSR 28.43(e)

Wrought iron & mild steel ladders, framed grills gratings etc. with ends of bars riveted or molded forged framed window guards barred iron doors stairs case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position. CSR 18.4

Painting G.I. pipes and specials with synthetic enamel paint in all shades as per ISI specification on existing or new work two coats paints including cleaning rubbing surface etc. 40mm & 50mm i/d G.I. pipe CSR 28.52 (c )

Painting G.I. pipes and specials with synthetic enamel paint in all shades as per ISI specification on existing or new work two coats paints including cleaning rubbing surface etc.25mm & 32mm i/d G.I. pipe CSR 28.52(b)

Applying priming coat with metal primer on new steel or iron work including preparation of surface.CSR 16.20

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work metallic or plastered concrete surface to give an even shade. CSR 16.17

Bidder Name

Amount in Words

RATTAN BUILDERS PVT LTD

RAVINDER KUMAR

RAM PARSHAD VERMA GOVT CONTRACTOR

Rahul Verma Govt. Contractor

Rahul Verma Govt. Contractor

RATTAN BUILDERS PVT LTD

RAVINDER KUMAR