Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹34.1 LAccepted-AOC | ₹34.1 L Quoted ₹34.7 L | L-1 | Accepted-AOC Awarded to lowest |
| 2 | L-2₹35.0 LRejected-Finance | ₹35.0 L | L-2 | Rejected-Finance Higher bidder |
| 3 | L-3₹35.1 LRejected-Finance | ₹35.1 L | L-3 | Rejected-Finance Highest bidder |
Tender Value
₹33.4 L
EMD Value
₹66,800
Closing Date
16 Apr 2026, 11:00 amClosed
EXECUTIVE ENGINEER
ELECTRICAL DIVISION HPPWD PALAMPUR
Construction of Heliport at Palampur in Tehsil Palampur Distt. Kangra (HP) (Balance work)(SH Supplying, Testing and Commissioning External Lighting therein).
2026_PWD_133929_1
Electrical Division HPPWD Palampur
Open Tender
Electrical Works
Percentage
Palampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,000
₹66,800
Yes
30 Aug 2026
10 Apr 2026
16 Apr 2026
10 Apr 2026
16 Apr 2026
10 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supplying, Installation, testing and commissioning of 4 Mtr. Hot dipped galvanised octagonal pole with 130mm bottom A/Fand 70mm top A/F made upto 3mm thick . HT sheet along with baseplate of size 200x200x12 mm thick (without bracket) 4 Nos of MI 6x450long "J" type EN8 grade foundation bolts along with temp lates , and including foundation along the provision of cable entry ,Single arm brecketas required . Complete in all respect. | |||||
| 1.01 | 4 Mtr. Hot dipped galvanised octagonal pole | 38 | each | - | - |
| 2Supply and fixing of following watts LED Street light 30 watt +/- 10% watts with protection IK 10 impact resistance and IP66, Aluminum die cast Housing, Pole mounted, precise street optic lens diffuser with integrated optics to ensure uniform distribution having beam angle of 120 degree, having minimum system lumen output 7200 lumens, system lumen efficacy of 120 lm/W with P.F.>0.95 and THD<10% ,CRI >70. The LED shall be Useful life of 50000 Hrs at L70 with five years warranty. The input voltage range of 150V to 270V (nominal rated voltage 240V) with 4 KV internal surge protection, Electrical Insulation Class I etc. as required complete in all respect.. Make Philips/ Wipro/ panasonic/bajaj. | |||||
| 2.01 | LED Street Light of 30 watt | 38 | each | 4,277 | ₹1,62,526 |
| 3 | SITC of hot dip galvanised, High Mast Lighting Pole, made of 3mm nominal thick high carbon steel, polygonal section and of following height, along with head frame and movable luminaire carriage to mount up to following nos of fittings, having opening at bottom with vandal proof locking arrangement, power operated double drum winch, 316 grade S.S hoisting ropes, flexible multicore trailing cable, integral power tool motor, manual handle, bolts & nuts, anchor plate & template, lightning finial, aviation light connections to control panel with suitable cabling, etc. complete with supply and fixing the following as per specifications detailed below.The winch should be of motorized & manual type .the capacity of motor 1.5 hp Is: 12615 .Lubrication self in oil bath .The high mast installation shall be capable of withstanding wind speed / wind load as per IS: 875/1987 (Part-III) and erected using foundation bolts on RCC foundation of suitable size as per IS 456 and as per manufacurer's design, with embeded, 75mm dia, B' class GI pipe for cable entry, plastering, finishing including etc. all complete as required
(The rate is inclusive of CC foundation as per OEM) and 250 watt LED . Height - 16 mtrs, Bottom - 360 mm,Top - 200 mm with luminaire carriage to mount minimum 8 Nos fittings. Make: Wipro/Bajaj/Surya as approved by Engineer in charge. | 2 | each | - | - |
| 3.01 | 16 mtrs. hot dip galvanised octagonal pole | - | - | - | - |
| 4 | Supplying & erection of outdoor stand mounted feeder pillar 415 v, 16 kw constructed fabricated with 1.6 mm tick crca steel sheet with 4 way terminal for input supply, TPN MCB 32 amp incomer, 3pole contactor 30 amp (AC1) for lighting, toggle switch 6 amp for auto manual selection, Timer Digital type, 4 way terminal for output lights ,single pole mcb 10 amp 10 ka , overload relay 2.5 a, contactor for motor control, 9amp (AC3) ,3 way terminal output for motor, led indicator lights for fwd/reverse ,push switch for motor operation, rotary switch for FWD/REV, pendent box for motor operation, terminal block for 25 sq. mm incomer cable of and 16 & 2.5 sq. mm for out going cables, connections testing and commissioning, etc as required (As per OEM of High Mast poles) Makes for switchgear: L&T/Siemens/ Schneider. | 2 | rach | - | - |
| 4.01 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required. Make: KEI/ Havells/ Plaza/ Grandley. | - | - | - | - |
| 4.02 | Armoured cable 6 sq. mm (Twin Core) | 15 | mtrs. | - | - |
| 4.03 | Armoured cable 10 sq. mm (Twin Core) | 25 | mtrs. | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
BOQ_198011.xls
BOQ • 0.32 MB
Heliport.pdf
Tender Documents • 3.97 MB
DECLARATION.pdf
Additional Documents • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].