REPAIRS REPLACEMENT TO FOOT PATH, HARD STANDING, COMPOUND WALL, FENCING, SEWAGE, DRAIN AND WELCOME PERIODICAL SERVICES TO BUILDINGS, CERTAIN REPAIRS TO JOINERY, SANITARY FITTINGS, WALL, FLOOR, PLASTER, FALSE CEILING, ROOF

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed.

Material and Labour for Non-skid coloured Ceramic joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not excceding 0.11 Sqm, in floors etc, set and jointed in cement mortar and pointed in white or coloured cement to match, laid over and including 20 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and Labour for Non-skid coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not excceding 0.18 Sqm, in floors etc, set and jointed in cement mortar and pointed in white or coloured cement to match, laid over and including 20 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles 350x250x7mm / 450x350x7mm in vertical surface such as dados, set and jointed in neat cement slurry over and including backing coat of 10mm thick in CM 1:4 complete all as specified and directed.

Material and Labour for Vitrified ceramic tiles 10mm thick (square/rectangular) light coloured area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:4 complete complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 100mm thick plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floors including necessary form work all as specified and as directed.

Material and labour for machine pressed precast concrete interlocking paver block, any shape and size of 60mm thickness M-40 grade conforming to IS 15658-2006 with grey cement and pigment laid over and including 50mm thick cushion of coarse aggregate of size 6.3mm and below, compacted with mechanical surface vibrator complete all as specified and directed.

Material and labour for Plain cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in copings, kneelers, apex stones,bed plates, kerbs, bed block for hold fast including necessary form work all as specified and as directed.

Material and Labour for 75mm thick Plain Cement Concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection,floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork and filling the joints with sand and bitumen in 1:1 ratio complete all as specified and as directed.

Dismantling of Stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or platform etc complete all as specified and as directed.

Material and Labour for Granite 20mm thick ( of any type table rubbed and polished) work machine cut as in steps, jambs pillars,window cills, cooking platforms and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite and laid over and including 20mm thick cement mortar 1 :4 complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.

Taking down steel/CPVC tubing and connections, including cleaning for refixing or removal to store of 15mm dia pipe complete all as specified and directed.

Taking down steel/CPVC tubing and connections, including cleaning for refixing or removal to store of 20mm to 25mm dia pipe complete all as specified and directed.

Supplying and laying 15/16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings complete all as specified and as directed.

Supplying and laying 20 mm inner dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings after taking out unserviceable pipe complete all as specified and directed.

Supplying and laying 25 mm inner dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings after taking out unserviceable pipe complete all as specified and directed.

Demolition of brickwork or stone/boulders masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material and Labour for providing precast cement concrete type C1, 1:3:6 (20 mm graded stone aggregate) solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone/concrete walls etc including raking out joints, hacking for key, scrubbing down with water etc of any description complete all as specified and directed.

Material and labour for rendering 15mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed.

Material and Labour for rendering 10mm thick on fair faces of concrete work in CM 1:4, using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured separately

Supply only integral water proofing compound all as specified and as directed.

Preparing newly plastered surfaces of any description and applying two coats of acrylic distemper over a coat of alkali resistant priming paint complete all as specified and as directed.

M & L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Distemper oil emulsion on wall surfaces.

Material and labour for one coat of white wash on old ceiling surfaces including necessary preparation all as specified and as directed

Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material and labour for old surfaces on wall and applying one coats of 100% premium acrylic emulsion paint having VOC not less than 50 gm/lit and UV resistance as per IS 15489-2004, dust, alkali and fungal resistant, of approved shadewith silicon additives @ 1.43 lit/10Sqm complete all as specified and as directed.

Dismantling of water tanks of capacity exceeding 500 ltrs and not exceeing 1000 ltrs capacity and removing from site complete all as specified and as directed by Engineer-in-charge.

Supply and fix Rotational moulded polyethylene water storage tanks having capacity 500 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position including taking down unserviceable tank all as specified and directed.

Supply and fix new Rotational moulded polyethylene water storage tanks having capacity 1000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position including over flow and drain out pipe complete all as specified and directed.

Disconnecting existing tank , setting aside (or lowering if required) for repairs, cleaning etc and hosting if required reconnecting and re-fixing in position.cleaning and removing all scale and dirt etc, from tahnks and from mouths of circulating pipes etc complete all as specified and directed.

cleaning of cast iron/ pvc pipes 100mm to 150mm bore pipes by rodding with iron rod, jute bags and well flushing after cleaning complete all as specified and directed

cleaning of cast iron/ pvc pipes 50mm to 75mm bore pipes by rodding with iron rod, jute bags and well flushing after cleaning complete all as specified and directed

cleaning of floor traps upto 100mm dia and removing waste material / sludge etc to a distance exc 100 m outside the MoD land and burrying the same pits in hygenic manners and covering the pits with excavated earth complete all as specified and directed by engg-in-chrage.

cleaning of blocked water closet and removing wate/ material sludge etc to a distance exc 100 m outside the MoD land and burrying the same pits in hygenic manners and covering the pits with excavated earth complete all as specified and directed by Engg- in - charge. Note: The complaint shall be cleared within 24 hrs after intimation to contractor if not then recovery @ Rs.350 per such complaint shall be levied on contractor.

Cleaning of septic tanks and soakage wells/pit/MH any position or as directed (any capacity) at prescribed location unit under AGE B/R CG kochi area located at Vizhinjam by desludging sludge and removing of soil/silt/grit/ sludge waste material etc.through sewer suction machine( Honey sucker truck, minimum capacity of 6000 ltrs ) including cost of fuel, lubricant, driver and co-driver, safaiwala required as per site requirement alongwith honey sucker vehicle and disposal of faecal sludge out side of defence land at place where decided by trivandrum Municipal Copn authority. Note :- Specification of sewer suction machine :- Minimum Capacity 6000 Ltrs, Type chasis mounted with hydralic facility, suction head maximum 10 Mtr Responsiblity of Bidder :- (i) The successful bidder should be Liaise with trivandrum, Municipal authority and shall take written permission for disposal of faecal sludge/soil . No extra cost will be provided for same. OR Bidder must have own/ lease land /plot register from Kerala, and obtain permission / NOC from Trivandrum, Municipal authority for disposal of faecal sludge/soil at his land. Same shall be submit to the department before start the work. No extra cost will be provided for same. (ii) Bidder/Owner shall send driver and safaiwala to take compaint slip along with separate register at office of AGE B/R CG Kochi of Vizhinjam daily including sunday and holidays or any time as per requirement to operate honey sucker machine and they will follow direction of Engr -in-charge. For each load shall be of 6000 Ltrs faecal sludge

Cleaning of sewage lines up to 150mm dia pipe by rodding from one man hole to next man hole, washing thoroughly with fresh water and removing all sludges from the sewage lines including removing existing man hole covers and refixing properly after cleaning and disposal of sludges out side MD land complete all as specified and as directed. Note: The sludge/debris and other waste material obtained after cleaning the drains shall remove from defence land duly followed the instructions laid down by the local govt bodies and the quoted rate shall be deemed to be inclusive of the removal of sludge/debris.

Material and labour taking down chowkhats or frames, without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 sqm in each and removing as directed.

Material and labour taking down chowkhats or frames, without taking off shutters from the frame not exceeding 1.5 Sqm in each and removing as directed.

Taking down shutter of any drescription Not exc 1 sqm in each panes and refixing the same opening complete all as specified and directed.

Re securing and and easing without taking down shutter of any description not exceeding 1 sqm a complete all as specified and directed.

Taking down shutter of any drescription exc 1 sqm but not exc 2 sqm in each panes and refixing the same opening complete all as specified and directed.

Re securing and and easing without taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each a complete all as specified and directed.

Supply and Fix PVC door frame size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges will be painted to match with prelaminated sheet reinforced with MS square tube supplying & fixing in opening as per specification complete all as specified and directed.

Supply and Fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification and drawing given in SSR Part-II complete all as specified and as directed.

Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) abricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall beacceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed by Engr-in-Charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Supply and fix mild bands, stapes, supports for hold fast and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fixing 2nd class hardwood factory made plain framed panelled shutters 35mm thick with lock rail and with panels of timber flat on both edges(feather edged) or 12mm thick commercial veneered particle board veneers on both side or with 9mm thick BWP commercial ply, size of members of shutters as specified in IS 1003-Part-I, kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and Fix 2nd class HW glazed and skeleton shutters 35mm thk, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Supply & Fix stainless steel wire cloth 0.36mm nominal dia of wire and average widht of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including taking down old unserviceable one.

Supply and fix aluminium powder coated frame for doors,windows, ventilators with one or more rebates with joint clip and using rubber beading etc complete all as specified and directed. Note : Glass panel/particle board panel filling shall be measured and paid separately.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, and sliding tower bolt 150mm long anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Supply and fix for powder coated, Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. Note: Glass pane shall be measured and paid separately.

Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern of DG 102, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement, specified and directed.

Supply and fix in repairs door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make: SANDHU, EVEREST

Hacking out old broken glass any thickness, size and quality from wooden frames or stone, concrete of brick surrounds, glazed with putty or beads all as directed.

Supply and Fixing 5.5 mm thick sheet glass tinted in square exceeding 0.5 Sqm in each pane for fixing in aluminium joinery including necessary beading as specified and as directed.

Supply and Fixing 3 mm thick sheet glass tinted in square not exceeding 0.5 Sqm in each pane for fixing in aluminium joinery including necessary beading as specified and as directed.

Supply and fix 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22complete all as specified and directed.

Supply and fix in repair 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and directed.

Supply and fix 75mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22complete all as specified and directed.

Supply and fix in repair 75mm size Butt hinges/Hy max hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22complete all as specified and directed.

Supply and fix aluminum handle fabricated type anodised of size 150mm complete all as specified and directed.

Supply and fix in repair aluminum handle fabricated type anodised of size 150mm complete all as specified and directed.

Supply and fix aluminium anodised barrel tower bolt of extruded section of size 200 mm complete all as specified and directed.

Supply and fix in repair aluminium anodised barrel tower bolt of extruded section of size 200 mm complete all as specified and directed.

Supply and fix aluminium anodised barrel tower bolt of extruded section of size 100 mm complete all as specified and directed.

Supply and fix 250mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fix in repair 250mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fixing in repairs floor door stopper aluminium alloy body and tongue, anodised with hard drawn steel spring, 140 mm over all length of cover plate complete all as specified and as directed.

Supply and fix Harrison rails, mild steel, chromium plated with fixing brackets stops rollers etc. including taking out old rail complete all as specified and as directed.

Material and Labour for 19/18 Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work including taking out old fillets complete all as specified and as directed.

Material and labour for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink primer including preparation of new wooden surface all as directed and as specified.

Material and labour for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.

Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified .

S&F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing of flushing cistern, brackets, flushing pipe etc, complete all as specified.

Supply and fix in repair plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover and mild steel aluminised hinging device etc complete all as specified and directed.

Supply and fix in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply and fix in repairs 15mm dia bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down , screwed for iron pipe or union complete all as specified and directed.

Supply and fix in repairs 15mm dia stop valves cast copper alloy, Fancy type, chromium plated with long shank and cup (concealed type) screwed down high press with crutch or butterfly handle both ends for iron pipe complete all as specified and directed.

Supply and fix in repair Brass CP mixer three ways 15mm bore for mixing “Hot or cold” water screwed down for iron pipe” including OHT and Telephonic shower complete all as specified and as directed. Make: Jaquar Code OPP-CHR-15125PM or equivalent in Parryware/Hindware/CERA

Supply and fix in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fix in repairs vitreous china wash basin, white flat back of size 550x 400mm including PVC waste pipe 600mm long, PVC connection 300mm long and chromium plated waste coupling of size including brackets cutting and pinning in ends of brackets complete complete all as specified and directed.

Supply and fix in repair waste coupling of PTMT 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed.

Supply and fix in repair waste coupling of PTMT 40 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed.

Supply and fix in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms) all as specified and as directed.

Supply and fix in repairs 32mm dia low density polyethylene(LDPE) pipes of pressure rating 6.00 kgf/Sqcm including all joints complete all as specified and directed.

Supply & Fixing in repairs Brass chromium plated bottle traps 32mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and as directed.

Supply & Fixing in repair 15mm bore dia Pillar taps, fancy type cast copper alloy CP with capstan heads , cromium plated screwed down, high pressure with or without letters cold or hot with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

Supply and fix in repairs grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gm) complete all as specified and directed.

Supply and fix in repairs 450mm size Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gm) complete all as specified and directed.

Supply and fix in repairs tubular towel rail, aluminium anodised 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fix in repairs PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

Supply and fix in repairs PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

Supply and fix in repairs PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.

Supply and fix in repairs PVC (SWR) bends any radius 75 mm bore complete all as specified and directed.

Supply and fix in repairs PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal complete all as specified and directed.

Supply and fix in repairs PVC (SWR) junction single, (Single T) 75 mm bore equal or unequal complete all as specified and directed.

Supply and fix in repairs PVC (SWR) vent cowl 110 mm bore equal or unequal complete all as specified and directed.

Supply and fix in repairs PVC (SWR) vent cowl 75 mm bore equal or unequal complete all as specified and directed.

Material and Labour for rendering 10mm thick on fair faces of concrete work in CM 1:3 mixed with integral water proofing compound @ 3% by weight of cement or as per manufacturers instruction, surface finished even & smooth without using extra cement including curing the plastered surface complete all as specified and directed. NOTE: Water proofing compound shall be measured and paid separately.

Material and labour for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof kerbs coving over chajjas and similar locations rounded or chamfered on edges complete all as specified and directed.

Material and labour for roof tiles, Mangalore pattern, interlocking at side laid dry complete including dismantling of old U/S tiles all as specified and as directed.

Schedule of Credit (Minus) Rs.9852.5 NOTE: Bidder shall insert credit amount of Rs. 9852.5 as rate in Green field under Col-13.

ARCHITRAVE CONSTRUCTIONS (BID ID -3490925)