ADDN ALTN TO STAIR CASES AT BLDG P-73 P-74 P-75 P-76 P-82 P-83 P-84 P-85 AND PROVN OF INTERNAL EMULSION PAINT AND GLASS DOOR WORK AT P-97 AT CGDHQ 1 UNDER GE (I) CG PORBANDAR

Schedule 'A' B/R

Demolition of Concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed by Engineer in charge.

Dismantling structural steel work including door gates etc., complete all as specified and directed by Engineer in charge.

Excavating in trenches, not exceeding 1.5 Metre wide and not exceeding 1.5 Metre depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5 Metre in depth for shafts, cesspits, manholes, pier holes, etc., and getting out in loose/soft soil., complete all as specified and directed by Engineer in charge.

Removing excavated soil not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by Engineer in charge.

Dismantling/ Demolition of brick work or stone masonry or RCC Pre cast Jali & Jafari built in cement mortar including all quoins, arches, pillars, etc., complete all as specified and directed by Engineer in charge.

Material & Labour for Porbandar stone masonry well bonded, bedded and solidly hearted built in Cement Mortar 1:6 complete all as specified and directed by Engineer in charge.

Material & Labour for rendering 15mm thick on stone surfaces in cement mortar 1:4 and even and smooth without using extra cement, complete all as specified and directed by Engineer in charge.

Material & Labour for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturer’s instructions, complete all as specified and directed by Engineer in charge.

Material & Labour for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors, complete all as specified and directed by Engineer in charge.

Supply & Fixing Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe 410-W quality A, complete all as specified and directed by Engineer in charge.

Supply & Fixing GI Stairs (framed) of Fe-410 W (Gde E-250) quality-A, including stringers, treads, landing, balusters, hand rails etc. including cleats, brackets, etc. complete at any height, complete all as specified and directed by Engineer in charge. Note : Contractor will provide all safety equipment and machinery for erecting staircase without any additional cost.

Material & Labour for two coats of anti-corrosive Epoxy Paint over a coat of primer on steel & iron surfaces over 10cm width or girth including preparation of new surfaces, complete all as specified and directed by Engineer in charge.

Material & Labour for Mild steel screw bolts (machine made) of dia 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long, complete all as specified and directed by Engineer in charge.

Material & Labour for Mild steel screw bolts (machine made) of dia 11 to 15mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm long but not exc 10 cm, complete all as specified and directed by Engineer in charge.

Surface excavation in loose/soft soil not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Hard-core of gauge exceeding 63mm but not exceeding 100mm deposited spread and levelled in layers not exceeding 15cm thick watered an reamed to a true surface with broken stone or boulders, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Cement Concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 80mm thick M-40 Grade Machine pressed precast concrete paver block of any colour any shape and size confirming to IS 15658-2006 with grey cement and pigment complete all as specified and as directed.

Material & Labour for 50mm thick Sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for providing cement concrete type B-0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, including necessary form work, complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkhat with shutters (without taking of shutters from the frames of any description exceeding 1.5 sqm but not exceeding 4.0 sqm in each panel, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 12mm thick toughened glass as in hinged doors, partitions/ automatic doors and similar work including cutting to shape, drilling holes required with all stainless steel fitting including L connector, silicon fixer, decorative handle, lock floor door spring for weight not exceeding 80 Kg for each leaf and decorative lamination film etc., with all fittings, complete all as specified and directed by Engineer-in-charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on stone wall including racking out joints, hacking for key scrubbing with water etc., complete all as specified and directed by Engineer-in-charge.

Material & Labour for granite (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including, grinding, polishing, moulding the edges and polishing and including over screed bed 20mm thick in cement mortar 1:6, complete all as specified and directed by Engineer-in-charge.

Material & Labour for preparation of old surfaces by complete removal of existing treatment of painted wall including pillar etc., of any height by mechanical equipment like electric wall sander and applying two coat of interior emulsion paint of first quality by using over a coat of primer with a coat of wall care putty all as specified in manufacturers instruction, complete all as specified and directed by Engineer-in-charge. Note : (a) This item include all cost related to safety equipment and scaffolding necessary for execute work at different heights. No extra amount will be claimed by contractor. (b) After painting, cleaning of all floors, ceiling, glass & furniture are contractor's responsibility.

Please Enable Macros to View BoQ information