Repair of Timber/Resin Depot Quarter at Jagni Ranital Unit

Amount

Dismantling of brick masonary in cement mortor T:6 above ground floor i/c disposing dismantled mariail upto upto a lead of 20 mtrs complete."

Excavation in foundation, trenches etc. in earthwork, lift upto 1.50 mtrs.stacking the excavated soil not more than 3 mtrs.clear from the edge of excavation and that returning the stacked soil in 15cm layers, where required, into plinth sides of foundation etc. consolidation each deposited layers by ramming and watering and then disposing of all surplus excavated eearth as directed within a lead of 20mtrs.In 1/2 Pick & 1/2 Jumper

Providing and laying of cement concrete 1:5:10 size 40 mm and down gauge in foundation, under floors and pavement i/c ramming & curing complete.

R.R Stone masonry in cement mortor in foudation & plinth of walls& abutment of culverts, etc. i/c dressing of stone. In cement motor 1:6.RHS vertical wall of Kitchen Ist step

Squared rubble masonry (H.D.C.R.) coursed with hard stone of approved quality in foundation and plinth of wall, R/Walls, B/wall and abutment of culverts etc. l/c dressing of stones. In cement mortar 1:5.

Brick wrok in cement mortar 1:6 in superstructure upto floor two level I/c curing complete.

Providing form work of steel plate shuttering so as to give rough finish i/c centering & shutering, strutting and proppeng etc. height of propping and cement below supporting floor to celling not exceeding 4mtrs.and removal of the same for in-situ reinforced. concrete & plain concrete work in:

R.C.C. work 1:2:4 (1 cement, 2 sand & 4 stone balast 20mm nominal size) i/c curing complete but excluding cost of form work & reinforcement in:

Mild steel/tor steels rein-forcement for R.C.C. work I/c bending & binding placing in position complete upto floor two level.

Wood work in frames, of doors, windows clere storey windows and other frames wrought, framed and fixed in position in first class Sal wood.

Preparation and fixing of 35 mm thick panelled glazed or panelled glazed shutter for doors, windows and clerestorey wondows i/c black enamelled iron butt hinges with necessary screws fitting in first class Sheesham wood.

6 mm thick cement plaster in 1:3 (cement: sand in respective ratios) in fair side of concretein ceiling/ walls for plastering up tlo floor two level l/c arises, internal rounded angles, chamfers and/or rounded not exceeding 80mm in girth and finished even and smooth i/e scaffolding.

15 mm thick cement plaster in 1:5 (cement: sand in respective ratios) in fair/rough side of brick/stone/concrete walls for plastering up tlo floor two level i/c arises, internal rounded angles, chamfers and/or rounded not exceeding 10mm in girth and finished even and smooth i/e scaffolding.

White glazeld tiles 6mm thick in flooring,, treads of steps and landing laid on a bed of covering of 12mm(1/2") thick cement mortar 1:3 finished with flush painting in white cement.

White glazeld tiles 6mm thick in skirting and risers of steps and dado on 12mm(1/2") thick cement mortar 1:3 & joined with white cement slurry..

Painting two coats (excluding priming coat) on new wood and wood based surfaces with ename/ready mixed flat oil paint brushing to give an even shade i/e cleaning the surface of all dirt, dust and other foreign matter and sand papering.

Distempering with oil bound distemper of approved brand and manufacture two coats and of required shade over and i/c a priming coat of distemper/alkali resistance of approved quality after thoroughly brushing the surface free from mortar dropings and other foreign matters and preparing the surface even and sand papered smooth i/c scaffolding.

Finishing wall with snowcem on old work one or more coats to give an even shade i/c throughly brushing the surface free from all dirt, dust foreign matters and sand papering i/c scaffolding.

Making plinth protection 50mm thick in cement concrete in 1:3:6 (1 Cement: 3 sand: 6 20mm ballast) i/c finishing the top surface of concrete smooth.

Construction of open surface drain in H.D.C.R. stone masonry 15 x 23cm U shape in cement mortar 1:6 and inside plastering 20cm thick with cement mortar 1:3 i/c earth work and laying 10cm thick. cement concrete 1:5:10 and 7.5cm thick cement concrete 1:2:4 l/c 20cm thick cement plaster 1:3 and finished with floating coat of neat cement.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium) grade tube fittings and clamps including making good the wall ceiling and floors 15 mm nominal bore Internal

roviding and fixing to wall ceiling and floor galvanised mild steel tubes (Medium) grade tube fittings and clamps including making good the wall ceiling and floors 15 mm nominal bore External

Providing & fixing PVC water storage tank of ISI 12701 Marked GI Inlet and outlet connection 15 mm nominal bore ball valve and arrange ment L/c hoisting upto all heights above ground level. 1000 litres net capacity tank

Providing and fixing of CP Bib cock within all leads and lifts and as per the direction of the Engineer-in charge and other incidentals.

Providing and fixing of Nova make stop cockswithin all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

/F wash basin with CI brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard pattern, I/c painting of fittings and brackets, cutting and making good the wall whenever required. White Viterous China Wash basin size 630x450 mm with a pair of 15 mm CP brass pilla rtaps.

Providing & fixing viterous china wash down water closet(Indian type WC Pan) with integral P or S Trap I/c jointing the trap with soil & vent pipe in cenent mortor 1:1

Providing & fixing PVC low level flushing cistern 10 litres complete with all fittings I/c cutting holes in walls &making good the same and connecting the flush bend with cistern and closet (over flow pipe to be paid separately)

P/F PVC floor trap ISI marked of self cleaning design I/c fixing with approved adhesive, cost of cutting and making good the wall and floors etc complete. 110x90 mm and P/F PVC single equal oval access door ISI marked

P/F PVC single equal oval access door ISI marked P/F PVC plain bend ISI marked I/c fixing with approved adhesive etc complete. 100 mm

P/F Stainless steel A ISI 304 (18/8)kitchen sink as per IS: 13983 with CI brackets and stainless steel plug 40 mm,I/c painting of fittings and brackets, cuting and making good the walls wherever required ...kitchen sink without drain 610x 510

SHYAM PATIAL

sandesh kumari