P/F OPENGYM EQUIPMENT IN VARIOUS AMC GARDEN

Amount

Cleaning of site by skilled labour as directed by engineer in charge. [PWD/DSR/LABOUR RATE]

Conveying material, obtained from road cutting, including all lifts, laying in layers breaking clods, dressing to the required lines, cures, grades and section for lead of over 50m to 300m inclusive from site of excavation to the site of deposition etc. Complete as directed by Engineer in Charge.Spec No: Rd 18 Page No. 97 D.S.R.I, No.912 Page No.245

Excavation for fdns in earth soils of all types of sand gravel and soft murum including removing the excavated material up to a distance of 50m beyond the building area stacking and spreading as directed, dewatering, preparing the beds for fdns and necessary back fillings, ramming, watering [including shoring and shuttering etc complete. [lift upto 1.5mtr]] Specs No. Bd A1 page No. 259

Excavation for foundation in laterite rock soft or hard, including, trimming and levelling the bed for the foundation, removing the excavated materials upto a distance of 50m beyond the building area, stacking as directed, dewatering and back filling complete (lift upto 1.5m) Spec No. Bd. A7 Page No. 20 D.S R.I. No.13Page No.21

Providing and casting in situ cement concrete M-15/1:2:4 of trap/granite/quartzite/genesis metal forbed blocks, foundation blocks and such other items including dewatering/ form work compating, finishing the exposed faces with sufficient minimum thickness of 1:3 cement plaster to give a smooth and even surface or roughening them if special finish is to be provided, finishing if required and curing etc complete (6.27 Bag/Cum) 31.

Suppying and fixing M200 grade precast Kerb stones 500X460X100 thk. Size as directed by engineer in charge. [as per sanction rate]

Providing and fixing Double Air Walker made from “B” class G.I. Pipe. The center pipe is of 88 mm made from “B” class G.I. pipe and duly bended, and the bottom support of M.S. round plate of 250 mm dia is welded at bottom. Center pipe top end section is covered by dome shaped closing cap made up of heavy quality cast iron material having 5mm thickness. The leg movement pedal frame is made of 42 mm made from “B” class G.I. pipe. The footrests are made from C.I. casting material, its sizes are 130mm X 300mm X 5mm. The handle frame is of 33 mm made from “B” class G.I. pipe. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. To join the centre pipe & leg movement frame G.I. pipe of 42mm dia with 3mm thickness & 60mm dia solid bar is used. The bending M.S. flat ‘L’ shaped is used to join the centre pipe & leg pedal frame. For support 25Ø ‘B’ Class G.I pipe is used. Other essential closing caps HDPE/LLDPE plastics top quality are used. The pins used are made up M.S bright bar of 25mm diameter. The bearings used are “6205” permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from MS FORGING material. The serclips used for assembly are of A24.. The Powder Coating is done with pure polyester attractive color powder with 60 to 70 micron thickness.

Providing and fixing cross trainer made from “B” Class G.I. Pipe. The Center Pipe is of 88 mm made from “B” class G.I. Pipe, and the bottom support of M.S. Round plate of 250 mm dia is welded at bottom. Center pipe top end section is covered by dome shaped closing cap made up of heavy quality cast iron material having 5mm thickness. The Handle Frame is made up of 42 mm “B” class G.I. Pipe. The leg movement pedal frame is made of 42 mm made from “B” class G.I. pipe. The footrests are made from CAST IRON material, its sizes are 130 mm X 300 mm & 5 mm thickness. To join the centre pipe & leg movement frame G.I. pipe of 42mm dia with 3mm thickness & 60mm dia solid bar is used. For the movement, Bushes are used & for it 60 mm OD & 3mm thickness. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. For support of footrest (of Cross trainer) 50mm X 50mm X 2 mm CRC Square pipe. HDPE/LLDPE Plastic Closing Caps wherever essential. The Pins used is made up of 25 mm diameter M.S bright bar. The Bearings used are of “6205” permanent lubricated sealed bearing of reputed make. Rubber grip are used for handles of cross trainer. The Nut Bolts used for assembly are made from MS FORGING material. The Powder Coating is done with pure polyester attractive color powder with 60 to 70 micron thickness.

Providing and fixing Seating & Standing Twister made from “B” Class Galvanized Iron(G.I.) Pipe. The Center Pipe is of Ø88 mm made from “B” class G.I. Round Pipe, standing twister bottom support is made up of M.S. round plate of Ø250 mm is welded at bottom. Center pipe top end section is covered by dome shaped closing cap made up of heavy quality cast iron material having 5mm thickness. The support frame of the Seating & Standing twister is of Ø 42mm, Ø60mm, and Ø50mm made from “B” class G.I. pipe. The handle frame of Seating & Standing twister is Ø33 mm & foot resting frame of seating side is made from “B” class G.I. pipe of Ø25mm & Ø33 mm. G.I Pipe B-Class is used for joining sleeve pipe frame & handle frame is made from Ø33mm with 3mm thickness. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. The standing plate is fitted on the standing frame is made up of G.I. Ø 88mm centre pipe & Seating plate is fitted on the frame is made up of Ø 60mm seamless pipe. Ø300mm x10mmThikness M.S. Round Plate. Closing caps made from HDPE/LLDPE plastics top quality. The pins used are made up of Ø25 mm bright bar. The bearings used are of “6205” permanent lubricated sealed bearing of reputed make. High tensile steel with galvanized nut bolts are used for assembly. The Powder Coating is done with pure polyester attractive color powder with 60 to 70 micron thickness.

Providing and fixing Multifunctional Trainer made from “B” class G.I. Pipe. The main frame of Multifunctional Trainer is Ø88mm made from “B” class G.I. pipe, and The bottom support of M.S. round plate of Ø250 mm is welded at bottom. For Chin Up portion is made up from 25Ø bar heavy quality. The handle frame is of Ø 42mm made from “B” class G.I. pipe. The bottom support of handle of 80 x 40mm x 3mm thickness is welded at bottom. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. Rubber grip are used for handles. High tensile steel with galvanized nut bolts are used for assembly. The Powder Coating is done with pure polyester attractive color powder with 60 to 70 micron thickness.

Providing and fixing Leg Lifter made from “B” Class G.I. pipe. The center pipe is of 88 mm made from “B” class G.I. pipe, and the bottom support of M.S. plate of 250 mm dia is welded at bottom. Center pipe top end section is covered by dome shaped closing cap made up of heavy quality cast iron material having 5mm thickness. The handle frame is of 33 mm made from “B” class G.I. pipe. The movement frame is made up of 42 mm “B” class G.I. pipe. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. To join the centre pipe & handle frame G.I pipe “B” Class of 42 mm dia & 3mm thickness is used. For the movement, bushes are used of 60mm dia with 3mm thickness & 60mm solid bar is used. The footrests is made from cast iron material, its sizes are 300 mm X 130 mm & 5 mm thickness. For support of footrest is 300mm X 130mm with 2mm thickness M.S. Plate and G.I. ‘B’ Class pipe is used. Closing caps wherever essential is used made from top quality HDPE/LLDPE plastic material. The pins used are made up of 25 mm diameter bright bar. The bearing used are of “6205” permanent lubricated sealed bearing of reputed make. The handle grip are made up of high quality Rubber material. The Nut Bolts used for assembly is made from MS FORGING material. The bushes (Stopper) used to avoid the collusion made from Poly Urethin Plastic material of 50 mm dia. The serclips used for assembly and locking is of A24. The Foundation pipes are embedded in C.C. stock. The Powder Coating is done with pure polyester attractive color powder of with 60 to 70 micron thickness.

Providing and double fixing Push Chair made from “B” Class G.I. pipe. The center pipe is of 88mm made from “B” class G.I. pipe, and the bottom support of M.S. round plate of 250 mm dia is welded at bottom. Center pipe top end section is covered by dome shaped closing cap made up of heavy quality cast iron material having 5mm thickness. The remaining frame is made up of 42mm “B” class G.I. pipe. The handle frame is made up of 42mm “B” class G.I. pipe. The seat frame is made up of 42mm & 50mm “B” class G.I. pipe. For the assembly different bushes are used which is made from 50mm with 3mm thickness seamless pipe & 50mm solid bar is used. The seats and back rests are fitted on the outer frames made up of M.S sheet 300mm X 300mmX2mm thick and deep drawn duly pressed in tools and dies to have uniform radius of 20mm with no sharp edges. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø 10mm thick welded M.S. Plate. Closing Caps are used wherever essential made from top quality HDPE/LDDPE plastic material. The pins used are made up of 25 mm dia solid bright bar. The bearings used are of “6205” permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from MS FORGING material for assembly. The serclips used for assembly is A24. The Powder Coating is done with pure polyester attractive color powder of with 60 to 70 micron thickness.

Providing and fixing Horse rider made from “B” class G.I. Pipe. The main frame of Ø88mm made from “B” Class G.I. pipe, and The bottom support M.S. round plate of Ø250 mm is welded at bottom. Center pipe top end section is covered by dome shaped closing cap made up of heavy quality cast iron material having 5mm thickness. The leg movement frame is of Ø42mm made from “B” Class G.I. pipe. The handle frame is of Ø33mm made from “B” Class G.I. pipe. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. For the support 50 X 25mm X 2mm CRC Rectangular pipe is used. Closing Caps made from top quality HDPE/LLDPE plastic material. The pins used are made up of Ø 25mm bright bar. The bearings used are “6205zz” permanent lubricated sealed bearing of reputed make. High tensile steel with galvanized nut bolts are used for assembly. The serclips used for assembly are of Ø25 mm. The Powder Coating is done with pure polyester attractive color powder with 60 to 70 micron thickness.

Providing and fixing rower made from “B” Class G.I. Pipe. The Main frame is of Ø88mm “B” Class G.I. Pipe and supporting frame is made using Ø42mm “B” Class G.I. Pipe. Center pipe top end section is covered by dome shaped closing cap made up of heavy quality cast iron material having 5mm thickness. The handle frame is of 33Ø made from “B” class G.I. pipe. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. To join the movement frame to main frame seamless pipe of 50mm dia & 3mm thickness is used The seats and back rests are fitted on the outer frames made up of M.S sheet 300mm X 300mmX2mm thick and deep drawn duly pressed in tools and dies to have uniform radius of 20mm with no sharp edges. Closing caps are made from top quality HDPE/LLDPE plastic material. The pins used are made up of 17mm diameter hardened bright bar. The bearings used are of “6205” permanent lubricated sealed bearing of reputed make. The handles used are made up of high quality Rubber grip. The nut bolts used for assembly are made from MS FORGING material. The bushes (Stopper) used to avoid the collusion made from Poly Urethane Plastic material of 50 mm dia. The serclips used for assembly is of 25 mm dia. The Foundation pipes are embedded in C.C. stock.The Powder Coating is done with pure polyester attractive color powder of with 60 to 70 micron thickness.

Providing and fixing Sit Up Board made from “B” Class G.I. pipe. The main frame is of Ø60 mm made from “B” class G.I. pipe. M.S checkered plate sheet of 2mm thickness is welded on main frame. The remaining frame of the sit up board is of 42 mm & 33mm made from “B” class G.I. pipe. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. The Powder Coating is done with pure polyester attractive color powder with 60 to 70 micron thickness.

Providing and fixing Leg Extension with fixed weight (10Kg) made up from “B’ Class G.I Pipe. The center main frame isof Ø88 mm made from “B” class G.I. pipe. Remaining structure frame is made from 48 mm and 33 mm “B” Class G.I. Pipe. Center pipe top end section is covered by dome shaped closing cap made up of heavy quality cast iron material having 5mm thickness. The seats and back rests are fitted on the outer frames made up of M.S sheet 300mm X 300mmX2mm thick and deep drawn duly pressed in tools and dies to have uniform radius of 20mm with no sharp edges. Closing caps are made from top quality HDPE/LLDPE plastic material. The pins used are made up of 25mm diameter hardened bright bar. The bearings used are of “6205” permanent lubricated sealed bearing of reputed make. The handles 33 mm GI ‘B’ Class pipe and high quality rubber grip is used. The nut bolts used for assembly are made from MS FORGING material. The serclips used for assembly is of 25 mm dia. The Powder Coating is done with pure polyester attractive color powder with 60 to 70 micron thickness. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate

Providing and Waist and Back Massager made from “B” Class G.I. pipe. The center pipe is of 88mm made from “B” class G.I. pipe, and the bottom support of M.S. round plate of 250 mm dia is welded at bottom. The remaining frame is made up of 33mm “B” class G.I. pipe. Center pipe top end section is covered by dome shaped closing cap made up of heavy quality cast iron material having 5mm thickness. The handle frame is made up of 33mm “B” class G.I. pipe. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. Closing caps are made from top quality HDPE/LLDPE plastic material. Acupressure Back roller made up of PP/HDP/Nylon highly effective is used. The pins used are made up of 25 mm dia solid bright bar. The bearings used are of “6205” permanent lubricated sealed bearing of reputed make. The handles used are covered with high quality Rubber grip. The nut bolts used for assembly are made from MS FORGING material for assembly. The serclips used for assembly is A24. The Powder Coating is done with pure polyester attractive color powder with 60 to 70 micron thickness.

Providing and fixing Shoulder Builder made from “B” Class G.I. pipe. The Center Pipe is of 88 mm made from “B” class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm dia is welded at bottom. Center pipe top end section is covered by dome shaped closing cap made up of heavy quality cast iron material having 5mm thickness. The handle ring frame is of 33 mm made from “B” class G.I. pipe. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. Closing caps are made from top quality HDPE/LLDPE plastic material. The pins used are made up of 25 mm diameter Harden bright bar. The bearing used are of “6205” permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from MS FORGING material. The serclips used for assembly is A24. The PP/HDP/Nylon bush is used for handling care. The Powder Coating is done with pure polyester attractive color powder with 60 to 70 micron thickness.

Providing and fixing DoubleLeg Stretcher made from “B” Class G.I. pipe. The center pipe is of 88mm made from “B” class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter is welded at bottom. Center pipe top end section is covered by dome shaped closing cap made up of heavy quality cast iron material having 5mm thickness. The remaining outer frame is of 42mm made from “B” class G.I. pipe. The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. The seats and back rests are fitted on the outer frames made up of M.S sheet 300mm X 300mmX2mm thick and deep drawn duly pressed in tools and dies to have uniform radius of 20mm with no sharp edges. The footrests is made from top quality CAST IRON material, its sizes are 130 mm X 300 mm & 5 mm thickness. The frame of footrests consists of 25Ø made from “B” class G.I. pipe. Closing caps are made from top quality HDPE/LLDPE plastic material. The inner bushes are made from seamless pipe; its diameter is 60 mm with 3mm thickness. The pins used in are made up of 25 mm diameter hardened bright bar. The bearings used are of “6205” permanent lubricated sealed bearing of reputed make. The Nut Bolts used for assembly are made from MS FORGING material. The bushes (stopper) used to avoid the collusion made from PP/HDP/Nylon Plastic material of 50 mm diameter. The serclip used for assembly is A24.. The Powder Coating is done with pure polyester attractive color powder of with 60 to 70 micron thickness.

Providing and fixing Cycle made from “B” class G.I. Pipe. The main frame of Ø 60mm made from “B” class G.I. pipe. For the support of foot pedal M.S. round plate of Ø250 mm 10mm thick is used. The handle frame is of Ø33mm made from “B” class G.I. pipe. The seats and back rests are fitted on the outer frames made up of M.S sheet 300mm X 300mmX2mm thick and deep drawn duly pressed in tools and dies to have uniform radius of 20mm with no sharp edges.The foundation used for fixing consists of square shaped stool four equal pipes of 30mm X 30mm X 2mm horizontal supports linked to top and bottom of stool, for top side of stool 250 Ø welded M.S. Plate. Closing Caps made from top quality plastic material. The pins used are made up of Ø 25mm bright bar. The bearings used are “6205zz” permanent lubricated sealed bearing of reputed make. High tensile steel with galvanized nut bolts are used for assembly. The serclips used for assembly are of Ø25 mm A24. The powder coat is done with attractive colour under 60 to 70 micron thickness.

Providing and fixing mild steel powder coated M.S. benches manufactured from any ISO certified company for 3 Adults 1.80 m long x 0.60 m wide using 50x25 M.S. Pipes, using 25 mm dia M.S.Pipes for resting side with approved powder coating as directed by engineer in charge

Providing and applying three coats of Apex paint of approved colour and shade to old and new surface in two coat including scaffolding if necessary and preparing the surface [excluding the primer coat] etc. DSR.I.No.391, P-122.

Zenith Sports

Elaar LifeStyle Pvt.Ltd