Construction of Forest Rest house at Nihri Distt. Mandi HP

Amount

Cutting in earth work in all kinds of classification of soil, viz pick work , jumper work, pick jumper blasting work hard blasting work conglomerate rocks including chiseling / wedging outside of rock including clearance of jungle uprooting or rank vegetable grass, bushes trees and sapling of girth and removal/disposal of rubbish and un-serviceable materials by mechanical transport up to any distance and stacking the serviceable / useful material at suitable places as per direction of Engineer- in –charge and shall be removed only after attaining the formation level and after final checking of Engineer- in –charge . The work shall be executed according to drawings and to avoid any damages to the private/ Govt. property in the vicinity of the work site , if any damages occurs to any property and not stored by the contractor shall be recoverable from the contractor up to the extent of damages , no payment for extra cutting beyond the approved cross section/ drawing will be made to the contractor / firm.

Excavation in soil in hilly area by mech means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto any metre and a lead upto any metre as per drawing and Technical Specification Clause 1603.1 within all leads , lifts and carriage of materials and other incidentals .

Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposed of cut material with a lift upto any metre and lead up to any metre as per clause 1603.2 as per drawing and Technical Specification within all leads , lifts and carriage of materials and other incidentals .

Earth work in excavation for structure in all depths and all kinds of soil as per drawing and technical specification clause 305.1 including setting out construction of shoring and bracing , removal of stump and other deleterious material and disposal up to any lead / lifts and dressing of sides and bottom and backfilling in trenches with excavated suitable material within all leads , lifts and carriage of materials and other incidentals or as per direction of Engineer in charge .

Providing and Laying concrete for plain/reinforced concrete P.C.C. nominal mix 1:5:10 (one cement : five sand ten graded crashed stone aggregate) 40mm (forty millimeter) nominal size in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 within all leads , lifts and carriage of materials and other incidentals .

Providing weep holes in brick masonry/ stone masonry/ plain reinforced concrete abutment, wing wall, return wall with 100 mm( one hundred millimetre ) dia PVC pipe extending through the full width of the structures with slope of 1(V) :20(H) ( one verical is to twenty horizontal) towards drawing face complete as per drawing and technical specification clauses 614,709,1206.6 as per direction of Engineer in charge including carriage of material through all modes of trasportation with in all leads and lifts of materials and other incidentials.

Back filling with granular material behind abutment, wing wall and return wall complete as per drawings and technical specification clause 1206.3 within all leads , lifts and carriage of materials and other incidentals .

Excavation in foundations, trenches etc.in earth work in all kinds of soil such as pick work, jumper work, blasting work, saturated soil , including chieslling or any other mixed variety of soil, dewatering and or removal of slush and other incidentals, lift up to any heights, stacking the excavated soil upto any leads clear from the edge of excavation and then returining the stacked soil in 15 cm ( fifteen centemetre) layer when required in to plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per direction of Enginer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1:5:10. (One cement: five sand : ten graded stone aggregate 40 mm(fourty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth . including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Excavation in drain and channel etc . in earth work in all kinds of classification of soil , viz pick jumper , blasting work , hard blasting work including chiseling / wedging out site of rock including dressing of sides, beds and disposing of excavated earth up to any distance and lift and disposed earth to be levelled and neatly dressed as per direction of Engineer- in – charge including carriage of materials with in all leads,lifts, and other incidentals .

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing form work with steel plates 3.15mm ( three point one five millimeter) thick welded with angle iron in frame 30x30x5mm (thirty X thirty X five millimeter) so as to give a fair fISIsh including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all height / depth of propping and centring below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work :

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto all thickness including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Stair case with slopping or stepped soffits , excluding landing but including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Beams, cantilevers, girders and lintels, side and sofits of beams, beam haunchings cantilevers girders bressumers and lintels upto any depth / length depth in all height in all floor level including carriage of materials with in all leads, lifts and other incidental complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Edges of slabs and breaks in floors and walls upto any width in all floor level including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillastersb buttresses, plinth and string courses and the like including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete 1:4:8 (One cement: four sand : eight graded stone aggregate 40 mm(fourty millimetre) nominal size) and curing complete excluding cost of form work in Foundation and plinth including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete 1:6:12. (One cement: six sand : twelve graded stone aggregate 40 mm(fourty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth . including all leads and lifts and carriage of materials and other incidentals.with in all leads, lifts and other incidentals.

Providing and laying reinforced cement concrete design mix M-25 ( twenty five ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforecement for reinfoced cement concrete work . The mix shall be designed as per requirement of I.S code and PWD specification . The design mix will be got approved from the Engineer - in - charge prior to the casting . The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code .

Suspended floor roofs, landing and shelves and their supports balconies beams, girders , bressumers and cantilevers upto all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Column ,Pillars. Post and struts etc . up to all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and fISInhing of nosing up to all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Lintels, beams girders bressumers and cantilevers upto floor any level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying upto first floor two level reinforced cement concrete 1:2:4 (one cement : two Sand : four graded crashed stone aggregate 20mm ( twenty millimetre ) nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in String courses, copings, bed plates, anchor blocks, plain windows sills and the like including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete 1:2:4 (one cement : two Sand : four graded crashed stone aggregate 40mm (forty millimetre ) nominal size)and curing complete excluding cost of form work in Foundation and plinth including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete 1:2:4 (one Cement:two Sand:four graded stone aggregate 20 mm ( twenty millimetre ) nominal size and curing complete excluding cost of form work in Walls (any thickness ) including attached pilasters buttersses,plinth and string courses etc. from top of foundation upto floor any level : including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete work 1:2:4 (one Cement:two Sand:four graded stone aggregate 20 mm ( twenty millimetre ) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor twolevel including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Cement concrete flooring 1:2:4 (one Cement:two Sand:four graded stone aggregate 20 mm ( twenty millimetre ) nominal size)laid in one layer finished with a floating coat of neat Cement 40 mm (forty millimetre ) thick including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Second class brick masonry in common burnt clay building bricks in foundation in plinth up to all level in cement mortar 1:6 (one cement : six sand) and curing compelete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

First class brick masonry in common burnt clay building bricks infoundtion in plinth up to all level in cement mortar 1:4 (one cement : four sand) and curing compelete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Second class half brick masonry in common burnt clay building bricks in super structure above plinth level up to all level in cement mortar 1:3 (one cement : three sand) and curing complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

First class half brick masonry in common burnt clay building bricks in super structure above plinth level up to all level in cement mortar 1:3 (one cement : three sand) and curing complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position including cost of binding wire complete upto all floor level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Random rubble masonry/polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six Sand : twelve Graded stone aggregate 20mm ( twenty millimetre ) nominal size in cement mortar 1:6 (one cement: six sand) in breast walls and retaining walls including all leads and lifts and carriage of materials and other incidentals.

Stone work ashlar punched (ordinary work) in superstructure upto floor two level in cement mortar 1:6 (one cement: six sand) including pointing with cement mortar 1:2(one cement : two sand) including all leads and lifts and carriage of materials and other incidentals.

Stone filling / Boulder filling dry hand packed tightly under floor including carriage of materials with in all leads, lifts and other incidentals.

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position First Class Indian teak wood including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. First Class Indian teak wood including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 ( eighty five ) G. with wire of dia 0.56 mm( zero point fifty six millimetre ) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 40 mm ( forty millimetre ) thick 1st class indian teak wood including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge glazing with glass panes of 4mm( four millimetre) thickness (weight not less than 10.00 ( ten) kg/sqm. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 19mm ( nineteen millimetre ) thick Commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 19mm( nineteen millimetre ) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete). including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing square edges cover fillets (beading) 19 x6mm (nineteen x six millimetre ) sectionincluding mitring at junctions with wood screws and nails complete 1st class Indian teak wood including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing M.S. Round or Square bars with M.S. Flats at required spacings in wooden frames of windows and clerastory windows including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing 40x3 mm flat iron hold fast 40 cm.( forty centometre ) Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. ( thirty x ten x fifteen centimetre ) 1:3:6 ( one cement : three sand: six graded stone aggregate 20mm ( twenty millimetre ) nominal size including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing anodized aluminum sliding door bolts anodized transparent or dyed to required shade with bolt and nut and screws etc. including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

300x16 mmx16mm (three hundred sixteen millimetre )

250 mmx16mm ( two hundred fifty x sixteen millimetre )

Providing and fixing anodized aluminum tower bolts (Barrel type) anodized transparent or dyed to required shades and color with screw etc. complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

200x10mm (Two hundred x ten millimeter)

150x10 mm (one hundred fifty x ten millimeter)

Providing and fixing aluminum handles anodized transparent or dyed to required shades and color with screws etc. complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

125 mm (One hundred twenty five millimeter)

100 mm (one hundred millimeter)

Providing and fixing 100mm( one hundred millimetre ) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing150mm( one hundred firty millimetre ) bright finished brass heaps and stapples (safety type) with necessary screws etc complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 150mm ( one hundred fifty millimetre ) oxidized M.S. hooks and eyes including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 150mm ( one hundred fifty millimetre ) oxidized M.S. double acting spring hinges with necessary screws. . including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing everest designer febric board ceiling tiles of size 600x600mm ( six hundred x six hundred millimetre ) over realy made powder coated metal sheet section frame work 600mm ( six hundred millimetre ) c/c gril suspended from ceiling complete with butter fly chips and hanger etc as per required patteren complete as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing metal ceiling penels over G.I. frame work thickness 0.7 mm ( zero point seven millimetre) powder coated as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm (six hundred x six hundred x ten millimetre ) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimetre ) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying Duro stone vetrified tiles (300x300mmx10mm( three hundred x three hundred x ten millimetre ) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimetre ) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment ofrequired shade to match the shade of tiles complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Provding wooden plank flooring 500mm ( five hundred millimetre ) thick and 20cm ( twenty centimetre ) wide in second class deodar wood complete as per directionof Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position 2nd class Kail wood including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 8 mm digital ceramic tile of size 300 x 600 mm ( three hundred x six hundred millimetre ) in grey/coloured of required shade in skirting risers of steps and dados on 8 mm( eight millimetre ) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying granite stone in flooring 20mm(twenty millimetre) (average)thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20mm ( twenty millimetre) thick including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 8 mm thick teak ply 1st normal one side teack face with butt joint and nails ( frame and cover fillets to be measured and paid for saperately ) as per directionof Engineer in charge including carriage of material within all leads, lifts and others incidentals.

`Providing and fixing square edges cover fillets (beading) 25mmx12mm ( twenty five x twelve millimetre )sectionincluding mitring at junctions with wood screws and nails complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 62.5mm x 75mm ( sixty two point five x seventy five millimetre ) hand rails in 1st class Indian teak wood straight length complete as per the direction of Engineer-in-Charge including carriage of materials within all leads, lift and other incidentals.

Providing and fixing first class indian teak wood 25mm + 25mm ( twenty five + twenty five millimetre ) balusters 25mmx25mm ( twenty five x twenty five millimetre ) square wrought fixed with ends housed (square or splay) to hand rails and treads or strings complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing sandwich puff roofing with top skin of 0.60mm (Zero point six zero milimetre) thick preprinterd steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) micons primer coating to back coast of polyester of 5 microns over 5 microns primer coating including fixing with screws, prepainted iron J or L hooks, bolts and nuts 6mm(six milimetre) dia with prepainted limpet and rubber washer complete with all accessories as required as per specifications and as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts other incidentals.

Providing and fixing sandwich puff ridges or hips 60 cm( sixty three centimetre ) overall with 0.60mm ( zero point sixty millimetre ) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coating + back coat of polyster of 5( five ) microns over 5( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpe and bitumen washers complete with all accessories as required including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing sandwich puff valley 60 cm ( sixty three centimetre ) overall 0.60mm( zero point sixty millimetre ) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five ) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm ( six millimetre ) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 150mm(one hundred fifty millimetre ) dia pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5( four point five ) kg/sqm including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and others incidental charges complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing PVC Plain bend 150mm (one hundred fifty millimetre ) dia on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing M.S. BP Sheet 1.66mm to 2mm ( one point sixty six millimetre to two millimetre ) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Steel work welded in built up sections, trusses and framed work including cutting, hosinting fxing in position and applying a priming coat of red lead paint.

In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters,purlins connected to common rafters and the like.as per design including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

In gratings framed guard bars, ladders, railling, brackets and similar works complete as per design including carriage of materials with in all leads , lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates complete including carriage of materials with in all leads , lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

6mm thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand) as per specification as per direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals..

15mm (fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 ( one cement: six sand) including carriage of materials within all leads , lifts of material and other incidentals .

15mm (fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 ( one cement: four sand) including carriage of materials within all leads , lifts of material and other incidentals .

15mm ( fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 ( one cement:six sand) including carriage of materials within all leads , lifts of material and other incidentals .

Applying a birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Distempering(two coat) with oil bound washable distemper of approved brand and manufacture of required shade and undecorated wall surfaces to give an even shade over and including priming coat with alkali resistant primer of approved brand and manufacture after thoroghly brushing the surface free from mortor dropping and other foriegn matter and also including preparing the surface even and sand papered smooth including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler including carriage of materials with in all leads, lifts and other incidental

Painting two coats (excluding priming coat) on new steel and other metal surfaces, with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with enamel paint other than white complete including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm( fifty millimetre ) dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 0.63mm ( zero point sixty three millimetre ) thick sheet 15cm ( fifteen centimetre ) wide , 45cm ( forty five centimetre ) over all semicircular plain GI sheet gutter iron brackets 40x30mm ( forty x thirty millimetre ) size bolts and nuts and washer etc. including making neccessery connection with rain water pipe complete as per design including carriage of materials with in all leads, lifts and other incidentals.

Providing under layer for plinth protection of 75mm ( seventy five millimetre ) thick (unconsolidated) bed of dry brick/stone aggregated 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of materials with in all leads, lifts and other incidental

Providing plinth protection 50mm ( fifty millimetre ) thick in cement concrete 1:3:6 (one cement : three sand : six graded/crushed stone aggregates 20 mm( twenty millimetre nominal size) including fISIshing the top surface of concrete smooth including curing complete and carriage of materials with in all leads, lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm ( fifteen x twenty two centimetre ) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement: three Sand) including earth work and laying 10 cm ( ten centimetre ) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm ( forty millimetre nominal size) and 7.5 cm ( seven point five centimetre ) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm( twenty millimetre ) nominal size) and finished with a floating coat of neat cement complete as per standard design. including carriage of materials with in all leads, lifts and other incidental .

Providing and fixing of cobal / local Stone Slab Flooring 50 mm ( fifty millimetre) Thick ( Average) and over 25 mm( twenty five millimetre ) thick Cement mortor 1:4 ( one cement : four sand ) complete in all respect including carriage of materials with in all leads, lifts and other incidentals .

WS & SI Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials with in all leads, lifts and other incidentals.

15 mm (fifteen millimetre) nominal bore.

20 mm (twenty millimetre) nominal bore.

Providing and fixing Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall including carriage of materials with in all leads, lifts and other incidentals.

Making connection of galvanined mild steel dintribution branch with galvanined mild steel main 20mm to 40mm (twenty millimetre to forty millimetre ) nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately):Angle Indian Universal closet including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing to wall ceiling and floor vitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing G.I. Inlet connection for flush pipe with W.C. Pan including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers white plastic seat and cover including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings: Flat back 550mmx400mm( fifty five x four hundred millimetre ) including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing vitreous china pedastal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing kitchen sink with C.I. Or M.S brackets, painted white including cutting holes in walls and making good the same but excluding fittings Vitreous China 600mm x 450 x 150 mm (six hundred x four hundred fifty x one hundred fifty millimetre ) including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 32mm ( thirty two millimetre ) dia C.P. Brass waste for wash basin or sink including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 32mm ( thirty two millimetre ) dia M.I union for wash basin or sink including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 100mm ( one hundred millimetre ) dia sand cast iron grating for gully, floor or Nahni trap including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 600x450mm ( six hundred x four hundred fifty millimetre ) bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers.including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 600mm x 20mm ( six hundred x twenty millimetre ) C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws .including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 600mm x 120 mm ( six hundred x one hundred twenty millimetre ) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws .including carriage of material within all leads , lifts of material and other incidentals .

Poviding and fixing CP brass toilet paper holders.including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing Satinless recessed type soap dish No 1531 of Jaguar or its equivalent complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. .

Providing and fixing brass bib tap (Superior or heavy type) with capston head 15mm ( fifteen millimetre ) dia.including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 15 mm (Fifteen millimetre) dia C.P. Brass pillar tap with Capstan head of Jaguar as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15 mm (Fifteen millimetre) dia C.P. Brass stop cock as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Brass full way valve with wheel.including carriage of material within all leads , lifts of material and other incidentals .

15mm ( fifteen millimetre ) dia

20mm ( twenty millimetre ) dia

Providing and fixing 1000 (one thousand liters) net capacity PVC water storage tank of ISI 12701 marked, G.I. Inlet and outlet connection , 15 mm ( fifteen millimetre ) nominal bore ball valve and mosquito proof PVC cover with locking arangement including hoisting up to all heights above ground level including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 75 mm. ( one hundred ten x seventy five millimetre ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including jointing with approved adhesive etc. including carriage of materials with in all leads, lifts and other incidental charges in all respect as per direction and Satisfaction of Engineer- in- charge .

110mm( one hundred ten millimeter )nominal diameter .

75mm( Seventy five millimeter )nominal diameter .

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm( three millimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material within all leads , lifts of material and other incidentals .

110 mm ( one hundred ten millimere )

75mm ( seventy five millimere )

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads , lifts of material and other incidentals .

110 mm ( one hundred ten millimere )

75mm ( seventy five millimere )

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads , lifts of material and other incidentals .

110 mm ( one hundred ten millimere )

75mm ( seventy five millimere )

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.complete. including carriage of material within all leads , lifts of material and other incidentals

110mm( one hundred ten millimeter )nominal diameter .

75mm( Seventy five millimeter )nominal diameter .

Providing and fixing PTMT jet spray of approved quality and colour with 1.5 mtr. ( one point five metre ) Tube as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals .

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals .

Constructing manhole with RCC top slab 1:2:4 mix ( one cement : two approved sand :four graded crushed stone aggregate 20mm ( twenty millimetre ) nominal size ) foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm ( forty millimetre ) nominal size) and inside plastering 15mm ( fifteen millimetre ) thick with cement mortar 1:3 (one cement three sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( one cement two sand :four graded stone aggregate 20mm ( twenty millimetre ) nominal size ) finished smooth complete including curing and testing . Inside size 800mm x800mm x and 500mm (eight hundred x eight hundred x five hundred millimetre ) deep including C.I cover with frame (light duty single seal pattern -1) 455 x610mm ( four hundred fifty five x six hundred ten millimtre ) internal dimensions total weight of cover and frame to be not less than 38kg. ( thirty eight kilogram ) (weight of cover 23 kg (twenty three kilogram ) of frame 15kg (fifteen kilogram) with 300 mm (three hundred millimetre) thick walls of square rubble masonry in cement mortar 1:3 (one cement : three Sand) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals charges in all respect as per direction and Satisfaction of Engineer- in- charge .

Equal Tees 1216

Reducing Tees 1620 x all branches.

Female branch Tees 1216 X 1216 X 15 mm thread.

Female elbows:-1216 X 15 mm thread.

Male thread connector:-1216 X 15 mm thread.

1216 X 15 mm thread.1216 X 15 mm thread.( Female thread)

Couplers:-1216

Reducers:-1620 x 1216.

Providing and fixing P.V.C. connection with Brass unions 300/450 mm (three hundred/four hundred fifty millimetre) length15 mm(fifteen millimetre) nominal size as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. .

RAKESH GOEL