Construction of Boys Toilet at Middle School Porgali

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of stone soling dully hand packed incl. watering, dressing, ramming with all carriage complete job as dirrected by Engineer in charge

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) crushed

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Brick work with common burnt clay (non modular) bricks of class designation 7.5. in foundation nd plinth incl. curing in cement 1:6 ( 1 cement : 6 coarse sand)

providing wood work in frames of of doors , windows , celestory windows and frames , wroght framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dash fasteners shall be paid for seperately), Foreign wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge (Note: Butt hinges and necessary screws shall be paid separately). Foreign wood 30 mm

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 75x47x1.70 mm

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 100x10 mm

Providing and fixing bright finished brass door latch with necessary screws etc. complete. : 250x16x5 mm

Providing and fixing bright finished brass handles with screws etc. complete : 100 mm

Providing and fixing bright finished brass hard drawn hooks and eyes 100 mm

Extra for providing and fixing of glass panes 3.5 mm (weight not less than 8.75 kg/sqm) of ordinary glass panes windows and clerestory window shutters

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone Nallah

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore

Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works. 75 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Single Socket 110 mm

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Single Socket 75 mm

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Plain Bend 110 mm (Type B)

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Door tee 110 mm (Type B)

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B: Bend 45 / Shoe bend 110 mm (Type B)

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Coupler/socket 110 mm (Type B)

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Reducer / Eccentric Reducer 110 to 75 mm (Type B)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. External work including trenching, refilling etc. PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing PPR Union 25mms or male female sockets

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

CARRIAGE OF MATERIALS, By Mechanical Transport including loading, unloading and stacking : Sand, stone aggregate below 40 mm nominal size for 30 Km Avg. lead

CARRIAGE OF MATERIALS, By Mechanical Transport including loading, unloading and stacking : cement for 5 Km avg. lead

CARRIAGE OF MATERIALS, By Mechanical Transport including loading, unloading and stacking :Steel for 5 Km avg. lead

CARRIAGE OF MATERIALS, By Manual Labour including loading, unloading and stacking for lead less than 0.50 km : Sand, stone aggregate below 40 mm nominal size for 100 m Avg. lead

CARRIAGE OF MATERIALS, By Manual Labour including loading, unloading and stacking for lead less than 0.50 km : Bricks for 100 m Avg. lead

CARRIAGE OF MATERIALS, By Manual Labour including loading, unloading and stacking for lead less than 0.50 km : Cement, for 100 m Avg. lead

CARRIAGE OF MATERIALS, By Manual Labour including loading, unloading and stacking for lead less than 0.50 km : Steel, for 100 m Avg. lead

CARRIAGE OF MATERIALS, By Manual Labour including loading, unloading and stacking for lead less than 0.50 km : Stones, for 100 m Avg. lead