Repairing of already installed Electric Street lights in the GP, Mehmod Abad A

Supply, installation, testing and commissioning of 100 W new-generation, energy-saving and environmentally-friendly long-life LED street light, made of pressure die-cast aluminium housing with high-efficiency LEDs as lighting source, having an efficacy of >110 lm/W, CRI >80, CCT ~5000 K, average life L70 ≥ 50,000 hours, no harmful UV and IR radiations. The luminaire shall operate at a temperature range of -10 °C to +45 °C, shall have surge voltage protection, IP66 protection, and impact resistance of IK07, to be installed on the existing bracket present on poles. LM79 & LM80 test reports shall be submitted from a government-approved NABL laboratory. The OEM must have its own in-house NABL testing facility for LED fixtures. Complete job including testing, commissioning and handing over to the department. The job includes replacement warranty of the fixture if damaged or burnt out for any reason for a period of two years from the date of successful commissioning / handing over to the concerned department. (Havells / Philips / Crompton / Jaguar / Wipro/ eq. make to be approved by EIC)

Supply, Laying, Connecting and Commissioning of 16 sq mm 4 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cable for Service line, incl. cost of required al. thimbles duly crimped. (Over head/ under ground) (Havells/Polycab/KEI/ eq. make to be approved by EIC)

Supply, laying, connecting and commissioning of 10 sq mm 4 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cable for Service line, incl. cost of required al. thimbles duly crimped. (Over head/ under ground) (Havells/Polycab/KEI/ eq. make to be approved by EIC)

Supply, installation, testing and commissloning of 5-32A single pole rating 240/415V, 10 KA "C" curve MCB of Legrand/ Havells/ L&T/ eq. make to be approved by EIC suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissloning of 100A 4P Connector of Legrand/ Havells/ L&T/ eq. make to be approved by EIC inside existing junction box complete with necessary connections.

Supplying, installation, testing and commissioning of pole mounted junction box of standard make ISI marked suitable to accommodate SPMCB and 4P Connector. incl all reqd. connections, Complete job.

Wiring for Circuit along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, excluding cost of conduits. (Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent).

2x 2.5 sq mm

PANEL NO. 1

Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor mounted, vermin and dust proof, outdoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required. The scope of work also entails securely installing the panel into the ground with concrete encasing its legs (As per approved design,size may vary as per site requirement)

INCOMING:

a)100 amp TPN MCCB 35 KA including spreader links, ( Adjustable thermal and Adjustable magnetic release ) Legrand/Schinider/L&T/ABB / eq. make to be approved by EIC.

b) 4 No. of Aluminium Bus Bar of 200 Amp.

c)Digital meters and phase indicators -1 set.

d) Astronomical timer with 4 pole contactor of suitable capicity. Legrand/ L&T /ABB make

OUTGOING:

a) 63 amp TPN MCB

b)space for 8 way MCB'S

PANEL NO. 2

Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor mounted, vermin and dust proof, outdoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required. The scope of work also entails securely installing the panel into the ground with concrete encasing its legs (As per approved design,size may vary as per site requirement)

INCOMING:

a)100 amp TPN MCCB 35 KA including spreader links, ( Adjustable thermal and Adjustable magnetic release ) Legrand/Schinider/L&T/ABB / eq. make to be approved by EIC.

b) 4 No. of Aluminium Bus Bar of 200 Amp.

c)Digital meters and phase indicators -1 set.

d) Astronomical timer with 4 pole contactor of suitable capicity. Legrand/ L&T /ABB make

OUTGOING:

a) 63 amp TPN MCB

b)space for 8 way MCB'S

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting the concrete path wherever required,jointing etc.direct in ground including excavation and refilling the trench with soft excavated earth making the surface level but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Supply, laying, and fixing of 32mm dia PVC Conduit (FRLS type), medium class, confirming to IS: 9537 standards, including all necessary accessories such as bends, couplers, tees, saddles, and junction boxes, complete as per site requirements and specifications.