Building

[1] Excavation for foundation upto 1.5 m depth including sorting 62.70 Cum 117.07

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

[2] Excavation for foundation upto 1.5 m depth including sorting 6.90 Cum 162.37

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

[3] Providing and laying cement concrete work 1:2:4 (1- Cement 11.10 Cum 3917.35

: 2- Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete Including cost of formwork and

reinforcement for reinforced concrete work in (A) For PCC

[4] Providing and laying Ordinary cement concrete work 1:1.5:3 8.80 Cum 5256.15

(1- Cement : 1.5- Coarse sand : 3- graded stone aggregates

20 mm nominal size) and curing complete Including cost of

formwork and reinforcement for reinforced concrete work

in (A) footings

[5] Brick work using common burnt clay building bricks having 10.00 Cum 4021.02

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

(B) Conventional

[6] Providing and laying ordinary cement concrete 1:1.5:3 (1- 12.50 Cum 8040.53

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc.complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M

[7] Providing and laying ordinary cement concrete 1:1.5:3 (1- 1.00 Cum 10589.43

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) for R.C.C lintel including finishing smooth

with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement.

[8] Providing and laying ordinary cement concrete 1:1.5:3 (1- 0.70 Cum 6876.57

Cement : 1.5- Coarse sand : 3- graded stone aggregates

mm nominal size) for reinforced concrete Chhajjas not

exceeding 10cm. thickness upto floor two level including

finishing the exposed surfaces with cement mortar 1:3 (1-

cement, 3 Fine sand) to give a smooth and even surface

centering and formwork and curing complete excluding cost

of reinforcement.

[9] Providing and laying ordinary cement concrete 1:1.5:3 (1- 5.80 Cum 9062.91

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (B) COLUMNS: (iii) Having

cross-sectional area more than 0.12Sq.M and upto 0.18 Sq.M

Description of Item Quantity Unit Rate In figures Amount

[10] Providing and Laying ordinary cement concrete 1:1.5:3 (1- 6.50 Cum 7258.19

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in (iii) Slabs having more than

10 cm and upto 13 cm. thickness

[11] Filling available excavated earth (excluding rock) in 46.00 Cum 130.39

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete.

[13] Filling in plinth with sand under floors including watering 4.00 Cum 460.18

ramming, consolidating and dressing complete

[14] Providing and laying ordinary C.C. M-200 (C.C. 1:1.5:3 - 1 1.30 Cum 6283.46

cement, 1.5 coarse snad, 3 graded stone agggregate of

mm nominal size) and curing complete including the cost of

formwork and excluding the cost of reinforcement for

reinforced concrete work for horizontal and vertical R.C.C.

[15] Providing TMT Bar FE 500D reinforcement for R.C.C. work 4631.40 Kg 76.21

including bending, binding and placing in position complete

upto floor two level

[16] Brick work using common burnt clay building bricks having 14.00 Cum 4289.32

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

(B) Conventional For GF

[17] Half brick masonry in common brunt clay building bricks 45.16 Sqm 715.03

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:3 ( 1-Cement : 3- coarse sand ) with 2 Nos

of 6mm Mild steel round bars after every three course

embedded in Cement Mortar in foundation and plinth (B)

Conventional

[18] P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 47.20 Sqm 1248.74

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light

[19] Providing and laying Ceramic tiles 8mm thick in flooring 51.10 Sqm 949.68

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement including Dedo.

[20] Providing and laying white glazed tiles 8mm thick in flooring 9.10 Sqm 908.32

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

[21] Providing and laying polished Kota stone slab flooring over 7.50 Sqm 989.44

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6- coarse sand) or L.M. 1.1.5 laid over and jointed with

grey cement slurry mixed with pigment to match the shade

of slab including rubbing and polishing etc. complete. (A)

25mm thick

Description of Item Quantity Unit Rate In figures Amount

[22] Providing and laying Black or Colour Machine Cut free edges, 11.90 Sqm 2942.91

Machine polished Granite Stone slab 18 mm thick single

piece For Stair, Step, Landing, Skirting etc as per design

including fully moulded round front edge and 1cm nosing

and necessary groove on trade of steps laid on 20 mm thick

cement mortar 1:6 (1-cement : 6 coarse sand) jointed with

grey cement slurry including rubbing, polishing & Finishing

etc complete as directed by Enginner in Charge.(Sill-Jems &

[23] Constructing Sandwitch Platform of 18 mm thick Polished 2.00 Sqm 3089.46

Black Granite at top and 30 mm thick Kota stone slab

flooring fitting at bottom with cementing Materials /

adhsives including macking necessary grooves in walls with

Vertical Kotastone 30 mm x 2 No sandwitch thick every

cm centre to cenre including all labour material of approved

quality incl. full moulded round front edge fixed in wall for

partition and jointed with grey cement slurry including

rubbing and polishing etc. complete .

[24] Providing and Fixing Windows with 40 X 40 X 5 mm. iron 12.20 Sqm 3963.64

angle & frame 30 X 30 X 4 mm. size in Double Shutter with

mm thick MS plate with hold fasts, iron hinges, handles,

stopper, locking arrangement etc. comp. Steel welded is built

up section cutting hoisting, finishing in two coats of oil

painting over coat of prime coat etc. complete.

[25] Providing and Fixing 32mm thick decorative flush Door 4.00 Sqm 4001.62

shutter (Shutter fixing to Stone frame) of approved quality

and design consisting of both side 1.00 mm thick texture

laminated flush door in single piece, all edges shall be

covered with teak wood beading incl. required fitting and

fixtures of S.S.,cylindrical lock system with all labour, tools

materials as directed by Engineer-In-Charge.

[26] Providing and fixing 30mm thick FACTORY MADE SOLID 1.60 Sqm 1146.37

PANEL PVC DOOR SHUTTER consisting of frame made out of

M.S. tubes of 19 gauge thickness and size of 19mm x 19mm

for stiles and 15mm x 15 mm for top and bottom rails. M.S.

frame shall have a coat of steel primers of approved make

and manufacture, M.S. frame shall be covered with 5 mm

thick heat moulded PVC ‘C’ channel of size 30 x 50 mm

forming stiles, and 5mm thick 75mm wide PVC sheets for top

rail, lock rail and bottom rail on either side, and 10mm

(5mm x 2) thick, 20mm wide cross PVC sheet as gap insert

for top rail and bottom rail, Panelling of 5 stiles and rails

with 30mm wide x 5mm thick PVC sheet beading on eighter

side, and joined together with solvent cement adhesive,. An

additional 5mm thick PVC strip of 20mm width is to be

stculk on the interior side of the ‘c’ channel using PVC

solvent cement adhesive etc. complete as per direction of

Engineer in charge, manufacture’s specification and

Description of Item Quantity Unit Rate In figures Amount

[27] Providing 20mm thick sand faced cement plaster on walls 195.70 Sqm 335.65

upto height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

including scaffolding curing etc. complete.

[28] Providing 15mm thick cement plaster in single coat on 130.00 Sqm 194.07

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand)

[29] Finishing wall with weather proof exterior emulsion paint on 195.70 Sqm 114.53

wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

[30] Applying two coats of acrylic laphy (putty) & two coats of 129.50 Sqm 40.59

primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign

matter and sand papered smooth as per instruction of

Engineer in charge & approved make.

[31] Wall painting (two coats) with plastic emulsion paint of 129.50 Sqm 78.90

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.smooth.

[32] Painting (Bala Painting) undecorated wall surface to give an 30.20 Sqm 407.03

even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand

papered smooth. on walls shade and pattern as directed by

Architect and Authority.

[33] Providing laying and jointing in true line and level 15mm 30.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

[34] Providing laying and jointing in true line and level 25mm 39.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

[35] Providing laying and jointing in true line and level 50mm 18.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Description of Item Quantity Unit Rate In figures Amount

[36] Providing, laying and jointing in true line and level 110 18.70 Rmt 835.14

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length

x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of

all materials.

[37] Provision and fixing water closet squatting orissa type W.c. 1.00 Each 1387.03

pan size 580mm integral footrest and 100 mm P or S trap

and in cluding 25 mm dia CP brass flush valve and GI inle

connection etc. comp. (A) Vitreous china long pattern white

[38] Providing and fixing wash basin with pedestal of std. Height 1.00 Each 1817.65

with single hole for pillar tap with C.I or M.S brackets painted

white including cutting holes and making goods the same

including. C.P. brass waste Couplin, and waste pipes and

bottel trap (A) Vitreous china. (ll) Flat back washbasin

mm x 400 mm size (1) in colour

[39] Providing and fixing Gun metal check or non return fullway 1.00 Each 186.83

wheel valve.(A) 15mm dia.

[40] Providing and fixing in position cowel went to pipes.(C) 2.00 Each 501.87

[41] Providing and fixing screw down bib taps of following 3.00 Each 186.83

size.(B) Brass chromium plated screws down Bib Tap. (i)

[42] Providing and fixing Gun metal check or non-return fullway 1.00 Each 420.63

wheel valve.(C) 25mm dia.

[43] Construction of Septic Tank (1.5m x 1.5m x 1.5m) using 1.00 No 11939.29

hollow brick masonary wall, covering with preast RCC slab

including jointing the slabs with pointing and providing

diametre U.P.V.C (Type B) Connecting the line upto Manhole

etc. complete

[44] Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 2.00 Each 558.36

100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good

the walls.

[45] Providing & Fixing S.W. Gully trap with C.I. Greating brick 2.00 Each 1246.92

masonay chamber and water tight C..I Cover with frame of

300 mm X 300 mm Size ( Indian ) with standard weight (i)

Square mouth traps (C) 150 mm x100 mm size P or R Type.

[46] Providing erecting and fixing double coated ISI water tank of 1000.00 Liter 3.95

required capacity each with all necessary fittings and

connection etc. complete on terrace.

Description of Item Quantity Unit Rate In figures Amount

[47] Providing and fixing SS Sink Glosy ASIS 304 Grade x 1mm 1.00 No 3158.03

thick with over all size 610 x 460 mm & bowl size 560 x

x 200 with single hole for pillar tap Fixing in sanwich

platform including cutting holes and making goods the

same, 15 mm dia pillar tap. Stop cock 15 mm dia, necessary

fixtures, connections and waste pipes etc complete.

[48] Providing , Painting ,Lettering Nandghar Logo Board As Pe 1.00 Each 1515.00

Design Specified And Providing Two Direction Side Of the

Building Photograph Copies -4 Of Each In Postcard size og

the Completed Work As Directed 23Cm x 45 Cm.

[49] Constructing brick masonry chamber for underground C.I. 2.00 Each 2932.93

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

[50] Providing and Fixing FIRE EXTINGUISHER 6 KG ABC 2.00 No 2550.25

including cost of labour complete with providing 1 year

guarantee for each bottle including testing and comissioning.

[51] Providing and fixing M.S. grills/ Railing/ Main Gate/MS 685.30 Kg 104.95

ladder of required pattern to M.S. frames of windows

,Door , Jali etc. with M.S. flats at required spacings and frame

alround, square or round Bright bars of 12mm dia, with

round headed bolts and nuts or by screws including all

Fixture etc complete as directed by Engineer in charge

[52] Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 10.00 Point 465.61

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length

, in below type of pipe erected with 6A Modular type switch

/ bell push & accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected oncealed in wall/ceiling

complete Cat- II

Description of Item Quantity Unit Rate In figures Amount

[53] Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 4.00 Point 654.48

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling completeCat- II

[54] Point wiring for on board Looped Plug with 6A Modular type 2.00 Point 236.34

switch & 5 pin socket erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall /

ceiling with following type accessories Cat- II

[55] Point wiring for Individual Plug with & earth wire of 1.5 2.00 Point 493.89

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on /

in wall / ceiling as per pipe erected with following type of

accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling

[56] Supplying and erecting LED indoor fittings with LEDs of 8.00 No 238.36

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Belowdescription have shown ranges of Wattage capacity of

capacitybetween the ranges shown.) (A) Tube Light with

integral driver (iii) 18-20 Watts, Surge - 2KV,IP-20,

conventional 4 feet cat-II

[57] Providing & erecting open well type horizontal mono block 1.00 No 9362.70

pump set with stainless steel body having following

specification (A) 0.5 H.P. single phase open well motor pump

set having discharge of 115 LPM @ 15 mtr. head suitable for

32 mm dia.delivery pipe with control panel

Description of Item Quantity Unit Rate In figures Amount

[58] providing and erecting Miniature circuit breaker single pole 1.00 No 91.91

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat-ll

[59] Providing & erecting 240 V MCB double pole switch for 1.00 No 278.76

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

[60] Providing and erecting Sheet Steel powder coated MCB 1.00 No 1492.78

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing (b) sheet

steel double door (IP-43) (iv) 12 Way

[61] Providing and erecting Approved make Ceiling fan with 3.00 No 1596.81

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

[62] Providing and Erecting following Shock Proof Tissino Type 2.00 No 219.17

accessories erected on 3 mm thick PC (Polycarbonate) Sheet

in PVC / Metal Box erected on Wall / Ceiling. (14) Electronic

Hum Free EME Socket Type Step Fan Regulator.

[63] Supplying Erecting Aproved make Bracket Fan of ISI Mark 1.00 No 2105.85

with 230 Volt A.C., 50 Cy/S 400/450 mm Sweep complete on

Wall or With lead cores and connections complete. (Make

shall be Approved by Engineer in Charge)Category II.

[64] Providing and erecting Pipe type earthing with 40 mm dia 1.00 No 994.85

2.5 mtr long 'B' grade G.I. pipe with necessary coupling buch

buried in specially prepared earth pit & G.I. earth wire of

SWG erected & connected as directed. For using salt and

charcoal / coke as required for pipe type earthing

[65] Mains with 1.1 KV FRLS PVC insulated ISI Marked Standard 30.00 Rmt 62.62

Copper Conductor wire in following Type of Pipe to be

erected Concealed in / Flushed on Wall / Ceiling with

Sq.mm Copper Conductor FRLS PVC Insulated Standered

wire of Green Colour for Earth continuity of following size.

(A) With Medium Class Rigid PVC Pipe and Accessories. (a)

wire 1.5 Sq.mm.

[66] Providing and fixing 600mm x 450mm bevelled edge 1.00 No 833.73

mirrror of superior glass mounted on 6mm thick A.C. sheet

or plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

[67] Providing and fixing pre-cast Rubber Dye / steel Dye inter 3.60 Sqm 686.90

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC : SP

63-2018 etc. Complete

Description of Item Quantity Unit Rate In figures Amount

[68] Providing and Placing IT wood writing table having size 1.50 1.00 No 15150.00

X 0.75 X 0.75 mt with one side drawer with using of 19mm

thick WP wood, top cover with 1 mm thick wood type

Formica including using of all necessary material & labour

etc completed as directed by Engineer incharge

[69] Providing and Fixing pin cushion display board having size 1.00 No 808.00

1.20 X 0.75 mt including using of alluminum section frame,

18mm thick WB plywood, nevy blue Cushion cloth pin etc

completed as directed by Engineer Incharge.

[70] Providing and fixing of hook of 10mm or 12mm dia including 1.00 No 303.00

drilling hole, fixing of male- female thrade fastner sealing the

same with appoxy compound, finishing the same etc

complete as directed by Engineer incharge.

[71] Providing and fixing medical device & equipment standio 1.00 No 1414.00

meter height measuring scale 2.10mt long including fixing in

wall with using of all heavy SS screw, rail etc complete as

directed by Engineer incharge.

[72] Providing and fixing Pre writing board having size 30cm X 13.00 No 404.00

20cm with decorative acralic border etc completed as

directed by Engineer incharge.

[73] Providing and supplying standard PVC (Polyvinyl chloride) 3.00 No 1010.00

Chair with handle of approved design and make as directed

by Engineer incharge.

[74] Providing and supplying standard PVC (Polyvinyl chloride) 3.00 No 606.00

Stool having size 3.75 X 0.60 X 0.45mtr of approved make as

directed by Engineer incharge.

[75] Supplying & erecting approved LED TV 32Inch 1.00 No 25250.00

,230V,Resolution: 4K Ultra HD (3840 x 2160) | Refresh Rate:

60 hertz,1 TV Unit, 1 Remote, 2 Table Stand, 1 User Manual,

2 Batteries,1 Warranty Card Connectivity Technology Wi-Fi,

USB, Ethernet, HD Connectivity: 3 HDMI ports to connect set

top box (1HDMI port eARC supported) | 2 USB ports to

connect hard drives and other USB devices | Built- in WiFi |

Bluetooth | Ethernet RJ45 | 1 earphone Jack | 1 Optical

digital audio output (SPDIF) | 1 RF- Radio frequency input |

1 AV input Sound: 24W Audio Output | Dobly Atmos | Audio

equalizer | Dolby Digital | Lip-sync adjustment | Sound

mode:Standard, Theatre, Sports, Music, Speech, Late Night

Smart TV Features: Google TV | Google Assistant | Voice

command | Screen mirroring: DLNA, Chromecast, Miracast,

AirPlay | Sleep Timer | On/Off Timer | Supported Apps:

Netflix, YouTube, Prime Video, Hotstar, SonyLiv, Hungama,

JioCinema, Zee5, Eros Now Display: 178 drgrees wide

viewing angle | VRR | ALLM | MEMC | HDR 10 | HLG | Dolby

Vision | Multiple picture modes

supported:Dynamic，Standard，Sports，PC/Game，Energ

y Saving，Cinema，FILMMAKER MODE Warranty

Information: 2 Year Comprehensive Warranty on product

provided by Toshiba from date of purchase

Description of Item Quantity Unit Rate In figures Amount

[76] Supplying & erecting 5 stage single reverse osmosis water 1.00 No 9595.00

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 psi inline type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH capacity

& erected as directed

[A] 10 Ltr / Hr with 7 Ltr StorageTank

[77] Providing and fixing PVC modular kitchen cabinet consisting 2.40 Sqm 7575.00

of base and wall units, made from high quality rigid PVC

boards (minimum 15-18 mm thick), including shutters,

shelves, drawers, SS hinges, telescopic channels, handles,

magnetic locks, necessary fittings, cutting, fixing, complete as

per design and direction of

[78] Providing and Fixing SS 304 Foldable Checking bed having 1.00 No 6060.00

size 1.50 X 0.60 X 0.75 mm including using of 25mm dia

pipe, SS 2mm thick, matter of 25.4 (1") of 40 density, cover

with regine cloth of approved quality etc completed as

directed by Engineer

[79] Providing and Fixing of SS 304 Hanger for bag including 10.00 No 252.50

using all necessary materials like SS rail, screw etc

completed as directed by Engineer lncharge.

[80] Providing and laying cement concrete 1:3:6 (1- Cement : 3- 0.40 Cum 3996.68

Coarse sand : 6- crushed stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A)

Wall Caps / Coping

Total :

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of

the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated Amount put to tender Estimated Amount put to tender

Deduct …............................. % Below Add …............................. % Above

In Words In Words

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5. Dismentalling of Credit materials amounting of Rs. 0.00 must be recovered from Contractor's respective R.A. Bill.

Dated Signature Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R & B) Sub Division Panchayat (R & B) Division

Dakor Kheda