NIT No 57/EEE/KBZ/MCD/2023-24 Item No.01

Amount

SR items

OD20663/2023-2024:Painting of ceiling fan in installed position with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent etc. as required.

OD20664/2023-2024:"Wiring for light/fan point/exhaust fan point call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recess medium class PVC conduit with piono type switch,phenolic laminated sheet, suitable size MS box and earthing the point with 1.5sqmm FR PVC insulated copper conductor single core cable etc as required. Group C

OD20665/2023-2024:Supplying and fixing following size metal box of following sizes (nominal size) on surface or in resess with suitable size of phenolic laminated sheet cover in front including painting etc. as reqd. 200mmX150mmX60mm deep

OD20666/2023-2024:Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections as required. 6 pin 15/16 amp socket outlet

OD20667/2023-2024:Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections as required. 3 pin 5/6 amp socket outlet

OD20668/2023-2024:Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections as required. 15/16 amp switch

OD20669/2023-2024:Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections as required. 5/6 amps switch

OD20671/2023-2024:Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (a) 100 Amp 16 KA

OD20673/2023-2024:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

OD20674/2023-2024:Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

OD20675/2023-2024:P/F ABC type (stored pressure) fire extinguisher 6 Kg capacity ISI mark with Map 70 % filled with MAP powder complete in all respect i/c fixing arrangement etc complete as reqd.

OD20677/2023-2024:Laying of one no PVC insulated and PVC sheathed/XPLE Al Conductor armoured power cable of 1.1KV grade of size not exceeding 25mm2 on surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

OD20679/2023-2024:Supplying and laying 25mmX5mm GI strip at 0.5 metre below ground as strip earth electrode,including connection/terminating with GI nut,bolts,spring, washer etc as reqd. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm)

OD20682/2023-2024:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole and Neutral

OD20683/2023-2024:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door

OD20684/2023-2024:Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as reqd. Upto 450 mm sweep

OD20685/2023-2024:S/D following size of FRLS PVC insulated copper conductor 1 core cable in existing surface/recessed /PVC/ Steel conduit as reqd.(d) 3X 6 sq mm

OD20686/2023-2024:S/D following size of FRLS PVC insulated copper conductor 1 core cable in existing surface/recessed /PVC/ Steel conduit as reqd.(c) 6X2.5 sq mm

OD20687/2023-2024:S/D following size of FRLS PVC insulated copper conductor 1 core cable in existing surface/recessed /PVC/ Steel conduit as reqd.(a) 3x2.5 sq mm

OD20688/2023-2024:Rewiring for light point/fan point/exhaust point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as reqd.

OD20689/2023-2024:Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

OD20690/2023-2024:Wiring for light / power plug with 2 X 4 sqmm FRLSPVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith 1 no 4sqmm FRPVC insulated copper conductor single core cable for loop earthing as required.

OD20692/2023-2024:Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

OD20693/2023-2024:SITC of single phase monoblock pumpset complete with all accessories workable on 240/415V, 50Hz AC supply (a) 1 HP (0.75 kW) single phase pump set head from 12-30 mtr suction and delivery 25x25mm.

OD20845/2023-2024:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recessed including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.(b) 25 mm

AR items

122.2.39:S/I/T/C of LED Tube type luminaire 20 Watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient LEDs with the following:(a) Total system wattage 20 watt +/- 5%(b )Luminous efficacy lumens/watt >=95 (c)Power Factor >=0.95

122.2.139:Supplying and laying of following size of C PVC pipe in along with all accessories like socket, bend, couplers etc. conforming to IS :4985:2000, Part II complete with fitting and cutting, jointing etc. direct in ground ( 50 cm below ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. 25 mm dia

122.2.150.(b):Supply, lowering and fixing following size of G.I. Pipe (M-Class) i/c cutting threading on both sides etc. ISI marked etc as reqd. 32mm(Nominal Bore)

122.2.151.(b):S & F following size of G.I. Socket. as reqd. 32mm

122.2.152.(b):S & F following size of G.I. Union. as reqd. 32mm

122.2.153.(b):S & F following size of G.I. Elbow. as reqd.. 32mm

122.2.155.(b):Supply, Installation, testing and commissioning of cubical type control panel board for single phase & Three Phase submersible pumping set of following rating complete with contactor, relay , MCB ,condenser ,voltmeter, ammeter and indication lamp etc including connections etc as reqd. 1.5 HP (Single Phase)

122.2.156.(a):P&F following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to IS.694/1990 etc. as reqd. 3x 2.5 sq.mm

122.2.158.(a):Supplying and fixing following sizes of insulated steel flexible safety rope for holding submersible pump set i/c clips etc complete as reqd. 6 mm

122.2.159:Development of tube well with suitable capacity of air compressor i/c lowering of the necessary induction pipe or line i/c cost of fuel, hire charges of compressor etc as reqd. The development shall be considered complete when Gravel stop sinking, Discharge ceased to improve and the sand contents are not more than 10 PPM after 20 minutes of starting the pump complete as reqd.

122.2.160.(a):S & F MS clamp made up of iron flat of size 50X6 mm with 4 nut bolt for holding the GI pipe pipe as reqd. 32 mm

122.2.213:Refilling & testing of ABC type fire extinguisher stored pressure dry powder Mono Ammonium by Phosphate Silicon Capacity 6 Kg

122.2.214:Refilling & testing of CO2 gas type fire extinguisher stored pressure 4.5Kg

122.2.215:S/I/T/C of compressor of water cooler up to 150 litres including making piping connections/charging etc. as reqd. (1 Ton Capacity) as per OEM installed make

122.2.216:Gas charging (R-22) of water cooler with complete work as required

122.2.217.(a):Replacement of defective parts of up to 150 litres capacity water cooler including connections etc. as required as per OEM installed make Running capacitor. (36 micro farad)

122.2.217.(b):Replacement of defective parts of up to 150 litres capacity water cooler including connections etc. as required as per OEM installed make Thermostat switch

122.2.217.(c):Replacement of defective parts of up to 150 litres capacity water cooler including connections etc. as required as per OEM installed make Float valve

122.2.217.(d):Replacement of defective parts of up to 150 litres capacity water cooler including connections etc. as required as per OEM installed make Motor capacitor (4 micro farad)

122.2.217.(e):Replacement of defective parts of up to 150 litres capacity water cooler including connections etc. as required as per OEM installed make Condenser fan blade

122.2.218:Repair & rewinding of condenser motor of water cooler etc. as required

122.2.219:S/I/T/C of condenser motor of water cooler etc. including connections as reqd. (1/5 HP) as per OEM installed make

122.2.220:Repair of condenser coil with help of welding set for water cooler etc. as reqd.

122.2.222:S & F of Carbon Candle of UV type Water Purifier/RO System complete as required as per OEM installed make

122.2.223:Replacement of Membrane RO system complete as required (0.1 micron) as per OEM installed make

122.2.224:Replacement of Span FILTER for RO System complete as required (0.1 micron) as per OEM installed make

122.2.225:Replacement of CTO for RO System complete as required (0.1 micron) as per OEM installed make

122.2.226:Replacement of Solenoid valve for RO System complete as required as per OEM installed make

122.2.227:Replacement of SMPS of water Purifier including connections etc. as required (25 Watt/3.5 Amp) as per OEM installed make

122.2.228:S/I/T/C of RO pump suitable for RO system capacity of 50LPH etc. complete as required. (100 GPD) as per OEM installed make

122.2.230:Supplying, Installation, testing and commissioning of earth pit of minimum dia. 100 mm size 3 mtr. Deep in hard rock soil, through machine or by any suitable means. Earth electrode consisting of 3 mtr. Long and 50 mm Dia. Size G.I electrode surrounded by highly conductive black fill compound chemical 2 bags (25 kg each) with necessary masonry encloser for 300 mm x 300 mm size GI earth pit cover complete as required.

122.2.236:Rewinding of AC ceiling fan of all sizes and make including oiling, greasing as required New Model (Light Weight)

122.2.238:Replacement of ball bearing of size 117/120 NBC equivalent SKF make as required.

122.2.239:Replacement of fan condenser 2.5 mF as required.

122.2.154B.(a):Supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. Single Phase 1.5 HP having discharge of 72 LPM Approx. at 49 M Head.

122.1.47:Supply of 250 mm (10 inch) sweep 1250 rpm exhaust fan Fresh Air Type complete with shutter blades etc. as required.

122.1.2:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm

ROSE ELECTRICALS

Bidder Name

KAFIL ELCTRICAL WORKS

ROSE ELECTRICALS