Miscellaneous rpair works Providing Cut stone flooring and steps with Falmed Finish Granite flooring in and around Shopping Complex area at Tirumala

Dismantling,claering away and carefully stacking materials useful for re-use, old cement mortar.

Demolishing and disposal of unserviceable materials within 100 metres lead Unreinforced cement concrete up to 15cm thickness

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Cement Concrete (1:2.5:5) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Conveyance of excavated surplus earth/debris to a distance 2 KM's from the site of work to the place where specified by the Engineer-in-Charge including loading and unloading etc., complete as directed during execution etc., complete..

Flooring with flamed finished granite stone 18 to 20 mm thick Sadanahalli White set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kg per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the slabs against supply)

Supply of hard granite stone slabs for flooring from approved Mulbhagal quarry including cost and converyance etc., complete with the following specifications. a) The size of the stone slab should not be less than 0.61mx 0.45m (2'-0"x1'-6"). c) The top of the slab should be dressed properly. d) All the sides of the slabs should be dressed to a depth of 40mm (11/2") from top surface to suit proper alignment and jointing with side slabs. e) The slabs should be laid horizontally and jointed properly to alignment over sand bed (excluding cost of sand bed).cement mortar bed. f) The joint of the slab should not be more than 6mm (1/4" thick). g) The slabs should be jointed with C.M(1:3) and the mortar should not come over the slab for the above item the rate is including cost and conveyance of all materials to site of work including necessary labour charges, dressing, laying, jointing but excluding cost of sand for bed, the bed will be paid under relevent item. (Cement mortar of 0.005 Cum/ Sqm should be used for joints).

Supply and fixing of stainless steel SS304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Supply of Cement Mortar(1:5) including cost and conveyance of all materials to site of work.