Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹18,700
Closing Date
7 Oct 2026, 10:00 am
Executive Engineer Division Kasumpti HPPWD Shimla-
Executive Engineer Division Kasumpti HPPWD Shimla-3
Providing and Laying Metalling Tarring at Rd. 0/00 to 0/490).. (Excluding GST) UNDER SCA (Balance Work
2026_PWD_144492_5
SD-I-CTR-Tender-26- 18248 dt 25-09-2026
Open Tender
Civil Works
Percentage
30 days
Shimla
AS per SBD
12 documents required · 12 mandatory
₹350
₹18,700
28 Sept 2026
28 Sept 2026
7 Oct 2026
28 Sept 2026
7 Oct 2026
28 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening /binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405 including carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge.(A) By Mechancial Means (Excluding GST) | 17.9 | Per Cubic Metre | 2,033.9 | ₹36,406.81 |
| 2 | Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 Kg./Sqm. using mechanical means as per Techanical Specification Clause 502 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) | 1,470 | Per Square Metre | 84.75 | ₹1,24,582.5 |
| 3 | Providing and applying tack coat with paving Bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.25 to 0.30Kg. per sqm (zero point two five to zero point three zero kilogram/square metre)on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) | 1,470 | Per Square Metre | 33.9 | ₹49,833 |
| 4 | Providing and laying bituminous concrete 30 mm (thirty milimetre ) thick with 100-120 (one hunderd -one hundred twenty ) TPH batch type hot mix plant producing an average output of 75 ( seventy five ) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 ( five point four to five point six ) per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 (five hundred nine ) complete in all respects including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) | 44.1 | Per Cubic Metre | 16,355.93 | ₹7,21,296.51 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.67 MB
BOQ_214894.xls
BOQ • 0.32 MB
SBD932119.pdf
Tender Documents • 7.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .