Restoration of TI Quarter At Port Colony Mundra

BILL OF QUANTITIES

Sign of Contractor Executive Engineer ( C )

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are

given to provide a common basis forbidding. The basis of payment will be the actual

quantities of work ordered and carried out, as measured by the Contractor and verified

by the Engineer and valued at the rates and prices tendered in the priced Bill of

Quantities, where applicable, and otherwise at such rates and prices as the Engineer

may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as it

is otherwise provided under the Contract, include all constructional plant, layout,

supervision, materials, erection, maintenance, insurance, profit, taxes and duties,

together with all general risks, liabilities and obligations set out or implied in the

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed to

enter a rate or price shall be deemed to be covered by other rates and prices entered in

the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included in

the items provided in the priced Bill of Quantities, and where no Items are provided the

cost shall be deemed to be distributed among the rates and prices entered for the

related items of Work.

7. General direction and descriptions of work and materials are not necessarily repeated

or summarized in the Bill of Quantities. References to the relevant sections of the

contract documentation shall be made before entering rates or prices against each item

in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification mentioned in this contract.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required blasting,

or the use of metal wedges and sledgehammers, or the use of compressed air drilling

for its removal, and which cannot be extracted by ripping with a tractor of at least

kw with a single rear mounted heavy duty ripper.

Sign of Contractor Executive Engineer ( C )

BILL OF QUANTITIES

Name of work: Restoration of TI Quarter At Port Colony Mundra

Percentage Rate Tender (Up to INR 50 Cr.)

Item Description of Item (with Quantity Unit Rate In Amount

No brief specification and figures

reference to book of

specifications)

1 Excavation for foundation upto 65.10 cum 555.20

1.5m depth including sorting out

and stacking of useful materials

and disposing of the excavated

stuff upto 50 metre lead.(D) Soft

rock not requiring blasting

2 Filling available excavated earth 39.40 cum 135.90

(excluding rock) in trenches,

plinth, sides of foundations etc.

in layers as directed including

consolidating each deposited

layer by ramming and watering

3 Filling in plinth with sand under 29.20 cum 831.70

floors including watering,

ramming consolidating and

dressing etc.complete.

4 Providing and Laying CC 1:2:4 5.20 cum 4736.60

(1 cement :2 coarse sand :

graded stone aggregate 20mm

nominal size ) and curing

complete excluding cost of form

(A) Foundation and plinth

5 Providing and Laying design mix 10.50 cum 4860.80

concrete M25 using minimum

cement 345 kg/cum, crushed

stone aggregates 20 mm nominal

maximum size and curing

complete excluding the cost of

form work and reinforcement for

reinforced concrete work in

(A) Foundations, footings, base

of columns and mass concrete

6 Providing formwork of ordinary 25.40 sqm 234.60

timber planking’s so as to give a

rough finish including centering,

shuttering, strutting and propping

etc. Height of propping and

centering below supporting floor

to ceiling not exceeding 4 m and

removal of the same for in-situ

concrete and plain concrete work

Sign of Contractor Executive Engineer ( C )

(A) Foundations, footings, bases

of columns etc. and mass

7 Providing and Laying M25 using 6.80 cum 9182.20

minimum cement 345 kg/cum,

crushed stone aggregates 20 mm

nominal maximum size and

finishing smooth with curing etc.

complete including cost of form

work but excluding the cost of

reinforcement for reinforced

concrete work in..

( III ) Having cross sectional area

0.12 to 0.18 sqm

8 Providing and Laying design mix 13.60 cum 7465.10

concrete M25 using minimum

cement 345 kg/cum, crushed

stone aggregates 20 mm nominal

maximum size and finishing

smooth with curing etc. complete

including cost of form work but

excluding the cost of

reinforcement for reinforced

concrete work in..

( II ) Having cross sectional area

0.08 to 0.12 sqm

9 Applying general insecticide pest 64.20 sqm 93.10

control treatment to walls, floors,

wood work such as doors, cup-

boards, furniture's etc.Including

labour, material etc. complete.

10 Providing and Laying design mix 14.60 cum 5148.00

concrete M25 using minimum

cement 345 kg/cum, crushed

stone aggregates 20 mm nominal

maximum size and curing

complete excluding the cost of

form work and reinforcement for

reinforced concrete work in

11 Providing and Laying design mix 18.30 cum 8055.40

concrete M25 using minimum

cement 345 kg/cum, crushed

stone aggregates 20 mm nominal

maximum size and finishing

smooth with curing etc. complete

including cost of form work but

excluding the cost of

reinforcement for reinforced

concrete work in..

( III ) Slabs having more than

Sign of Contractor Executive Engineer ( C )

cm and upto 13 cm thickness

12 Supplying, bending, hooking and 3500.00 kg 85.70

binding thermomechanically

treated (TMT) corrosion resistant

Fe-500 grade bar reinforcement

including placing in position etc.

complete upto floor two level.

13 Precast concrete block masonary 39.30 cum 4436.60

( including quoin blocks, jamb

blocks, closer etc.) with solid

concrete blocks of approved size

made of C.C.1:3:6 (1 cement :3

coarse sand:6 graded stone

aggregate 20 mm down gauge )

in in super structure above plinth

upto floor two level in C.M. 1:6

14 Providing and Fixing 35 mm 11.20 sqm 6886.90

thick shutters for doors,windows

and clearestory windows incl

indian teak wood frames 12cm x

7cm size incl stainless steel

fixtures and fastenings incl

primer coat of approved quality

and two coats of oil painting etc

complete( II ) Fully panelled

15 Providing and Fixing anodised 14.70 sqm 2668.00

aluminium section Two track

windows with outer frame

mm x 31.5 mm of 19G, weighing

0.57 kg/m and shutter frame

weighing 0.38 kg/m with all

arrangement for fixing, PVC

weather strip, spring handles and

other fixtures etc. including

fixing 4mm glass of approved

quality as directed etc. complete.

16 Providing and Fixing glazed 0.80 sqm 4916.30

louvered glass windows and

ventilators with teak wood frame

10cm x 7cm size including

coats of oil painting and MS bars

16mm dia. fixed at spacing not

exceeding 100mm c/c etc.

17 Providing, throating or plaster 12.40 m 52.00

drip and moulding to RCC chhaja

18 Providing and Laying polished 14.70 sqm 1126.00

kota stone slab 25 mm thick

flooring over 20 mm (average)

thick base of cement mortar 1:6

(1 cement : 6 coarse sand) laid

over and jointed with grey

Sign of Contractor Executive Engineer ( C )

cement slurry including rubbing

and polishing etc. complete.( all

sides machine cut, hand dressed)

19 Providing and Laying Polished 57.60 sqm 779.40

Granamite vitrified tiles of size

600 x 600mm and 8mm thick of

approved make and colour

having homogeniouse materials

in flooring laid on 20mm thick

average cement mortar 1:3 (1

cement: 3 coarse sand) or

approved chemical adhesive

mortar in case of laying on

existing flooring and pointed

with white cement slurry.

20 Providing and Laying Polished 4.10 sqm 952.30

Granamite vitrified tiles of

required size and 8mm thick of

approved make and colour

having homogeniouse materials

in skirting, dedo etc. on 10mm

thick cement plaster 1:3 (1

cement: 3 coarse sand) or

approved chemical adhesive

mortar in case of laying on

existing flooring and pointed

with white cement slurry.

21 Providing and laying 25 mm th. 1.80 sqm 1126.00

Machine cut polished Kotah

stone slab for shelves & cooking

plateform green or blue with

polishing on both sides and stone

should be in one pieces as per

width of cupboars incl. grooving

and fixing in wall & making

good the same etc. complete.

22 Providing and Laying ceramic 9.70 sqm 702.80

tiles 6mm thick of approved

make and colour in flooring laid

on a bed of 20 mm thick (avg)

cement mortar 1:3 (1 cement :

coarse sand) finished with flush

pointing in white cement.

23 Providing and Laying ceramic 34.10 sqm 877.60

tiles 6mm thick of approved

make and colour in skirting or

dedo on 10mm thick cement

plaster 1:3 (1 cement: 3 coarse

sand) and pointed with white

24 Providing cement vata (10 cm x 48.40 m 40.10

10 cm size) quarter round in

cement mortar 1:1 including neat

cement finishing watering etc.

Sign of Contractor Executive Engineer ( C )

25 Providing & fixing (Simpolo 1.00 each 7546.00

make) Crystal wall vit pan of size

490L 360W 350H with fitting &

trap of approved design complete

including painting of fittings and

brackets, cutting and making

good the walls and floors

wherever required complete as

directed by EIC/ Architect

26 Providing and Fixing PVC 1.00 each 1326.50

flushing tank 12.5 litre capacity

of approved quality with all

accessories including making

inlet and out let connections etc

27 Providing & fixing hand shower 1.00 nos 1247.00

health faucet of a brass body with

wall hook and 1.5 m hose of

Jaquar : ALD : 573 / Cera /

Benelave or equivalent complete

as directed by EIC/ Architect

28 Providing and Fixing wash basin 1.00 each 1626.30

with single hole for pillar tap

with CI or MS Brackes painted

white including cutting holes and

making good the same but

excluding fittings. (a) Vitreous

china (ii) flat back wash basin

550 x 400 mm size in white

29 Providing and fixing 25mm and 1.00 each 2982.00

15mm dia UPVC pipe as per

requirement for tap,valve,etc.

including material and labour

charge for making chases fixing

the pipe with clamps jointing of

pipes and fittings with suitable

solvent coplete as per direction of

engineer in charge concealed

work for 1 WC /Toilet

30 Providing and fixing 25mm and 1.00 each 4033.00

15mm dia CPVC & UPVC pipe

as per requirement for

tap,valve,etc. including material

and labour charge for making

chases fixing the pipe with

clamps jointing of pipes and

fittings with suitable solvent

coplete as per direction of

engineer in charge concealed

work for 1 washroom

31 Providing and Fixing screw 4.00 each 259.20

Sign of Contractor Executive Engineer ( C )

down bib tapes of the following

size. ( A ) Brass screw down bib

polished bright ( I ) 15 mm dia

32 Providing and Fixing to wall 20.00 m 109.10

ceiling and floor 6.0 kg f/cm2

working pressure polyethylene

pipes (Printed ISI marked) of the

following outside dia . Low

density complete with special

flange compression type fittings,

wall clips etc. Including making

good the wall ceiling and floor.

I/We am/are willing to carry out the work at… .................. %above/below percent (Should

Be written in figures and words) of the estimated rate mentioned above. Amount of my / our tender

works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………%below Add………%Above

In words In words

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rulesi.e.1%oftheworkdone.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/CDate:11/05/2017as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item

At the rate of input rate mentioned in all the tender.

Sign of Contractor Executive Engineer ( C )