REPAIRING AND RENOVATION OF VARIOUS BUILDINGS OF EMRS SCHOOL KHODADA AT.NIZAR, DIST : TAPI-VYARA

No. Figures

1 Demolition and disposal of unserviceable materials with all lead and lift.(i) Cement concrete. 478.51 CMT. 624.49

2 Demolition including stacking of serviceable materilas and disposal of unserviceable materials with 4.49 CMT. 1084.29

all lead and lift. (i) R.C.C. work

3 Demolition of Brick work and stone masonry including stacking of serviceable materilas and 94.52 CMT. 564.15

disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

4 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and 1254.29 SMT. 49.40

disposal of unserviceable materials with all lead and lift.

5 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats 350.00 EACH 257.62

architraves, holdfasts and other attachment etc. complete and stacking them within all lead and

lift.(ii) exceeding 3 Sq.M. in area.

6 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including 1069.60 RMT. 76.96

stacking the materials with all lead and lift ( for any dia, of pipe)

7 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank 230.00 EACH 415.78

etc. including stacking the materials with all lead and lift.

8 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member 1733.10 SMT. 20.05

including stacking of serviceable material and disposal of unserviceable from site of work with all

lead and lift

9 Providing and laying cement concrete 1:2:4 (1- Cement :2- Coarse sand : 4- graded stone 39.21 CMT. 3966.27

aggregates 20 mm nominal size) and curing complete including cost of formwork in (A)

Foundation and Plinth (A) PCC

10 Providing and laying controlled cement concrete work M200 and curing complete including the 24.01 CMT. 6588.07

cost of form work but excluding the cost of reinforcement of reinforced concrete work in All Types

of Wall Pardi, Walls

11 Providing and fixing TMT bars Fe-500D steel reinforcement for R.C.C. work including binding, 3097.10 Kg . 78.30

bending and placing in position complete upto floor two level ,Ground Floor , First floor , Terrace

Floor All Floor Level.

12 Brick work using common brunt clay building bricks having crushing strength not less than 35 64.44 CMT. 4445.01

kg/sqcm. in foundation and plinth in cement mortar 1:6 (1 cement :6 fine sand) etc.comp. (B)

Conventional All Floor

13 Half brick masonry in common brunt clay building bricks having crushing strength not less than 258.95 SMT. 675.69

35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in (B) Conventional , All Floor

14 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or Full/half 6270.52 SMT. 247.45

brick walls for interior plastering upto floor all level and finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand) mixing of water proofing plaster SBR. All Floor

15 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level 3588.28 SMT. 412.08

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. with mixing of water proofing plaster SBR All

16 Providing and laying polished Granite Slab 18mm thick in Flooring,Risers of steps, Dedo, window 559.24 SMT. 2502.78

sill, jembs and pillars laid 20mm thick Cement Mortar 1:4 (1-Cement : 4-Coarse Sand) fixing with

adhesive and jointed with Grey Cement Slurry including full molded round front edges , rubbing

and polishing etc. complete.Unit rate of 1 Sq.Mt.

SHEDULE B Page

Item Rate in

Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

No. Figures

17 Providing and laying Virtified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and 363.96 SMT. 1099.95

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

18 Providing and laying Virtified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and 1173.65 SMT. 1169.98

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement

19 Providing and fixing flush door both sides laminated andshutter fabricated from 35 mm thick solid 97.23 SMT. 4501.57

core malemine faced three layered pre laminated flat pressed wood based exterior grade bonded

BWP/BWR synthetic resin having stamped IS 12823 grade I type II including three coats of

lacquer polishing to exposed wooden surfaces and Stainless steel decorative type designs fixtures /

fastening 2Nos. Handles, 2Nos. Aldropes, towerbolt etc. as per architectural detailed drawing and

as directed by engineer in charge..

20 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter having extra 141.12 SMT. 2615.04

reinforcement on sides & edges in polish finish. The core of the shutter & frame is to be filed up

with injected polyurethene foam done in situ alongwith embedded wooden pieces for stiffening &

also taking hinges & fintures. The whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with necessary

screws & alluminium S.S fixtures & fastenings & fastener sleeve.

21 Providing and fixing, repairing of door & window 35 mm thick shutters for Doors, windows and 223.20 SMT. 2474.50

clear story windows and 4mm frosted glass including Two coats of oil paint to wooden surfaces

and Stainless steel decorative type designs all necessary fixtures / fastening with ancore fastening

of old granite or teak wood frame all labour etc.as directed by engineer in charge.

22 Providing and fixing window having extruded aluminum Colour Powder Coated section frame 251.56 SMT. 1705.66

main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size

61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.0.659 Kg/mt with sliding shutters of horizontal member size 40mm

x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @

wt.of 0.456Kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

complete for window

23 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm 28.44 SMT. 1175.55

, @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

24 Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm,@ 30.00 SMT. 2186.79

Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame with 5 mm thick transparent

bronze colour tinted float glass as details etc complete for Fix window. any design

25 Providing and fixing Teak Wood Frame 50 x 75 x 35 mm with 19mm thick ply shuttur with both 259.20 SMT. 4885.37

sides laminated and shutter fabricated from 19 mm thick including three coats of lacquer

polishing to exposed wooden surfaces and Stainless steel decorative type designs fixtures /

fastening 2Nos. Handles, 2Nos. Aldropes, towerbolt etc.including I.T.W. as per architectural

detailed drawing and as directed by engineer in charge..

26 Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats at required 13242.00 Kg. 113.12

spacing and frame alround square or round headed bolts and nuts or by screws.including applying a

priming coat of red lead paint and two coats of oil painting etc complete (A)Plain grill

27 Removing old colour by a washing and scraping and sand papering the wall surface smooth 17982.28 SMT. 92.96

including necessary repairs to scratches complete and Wall painting (two coats) with plastic

emulsion paint of approved brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth.

SHEDULE B Page

Item Rate in

Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

No. Figures

28 Removing old colour by a washing and scraping and sand papering the wall surface smooth 7757.98 SMT. 164.86

including necessary repairs to scratches complete and Priming:

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application of putty

is not recommended.Minimum 4-6 hours duration is required between each coat of weather

shield max paint Finishing wall with weather proof max exterior paint on wall surface (two coats)

to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

29 Applying priming coat over new steel and other metel surface and wooden window and door after 2138.62 SMT. 125.72

and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter

and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint

brushing red lead. and Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including cleaning the surface

an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

30 Steel work welded in built up sections, framed work including cutting, hoisting, fixing in position 57.2513 Quintal 9108.48

and applying a priming coat of red lead paint :-

(A) In beams and joints channels angles, column, tees, flats with connecting plates or angle cleats

as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

31 Providing and laying integral cement based water proofing treatment including preparation of 3013.29 SMT. 906.98

surface as required for treatment of roofs, balconies, terraces etc. consisting of following

operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with

proprietary water proofing compound comforming to IS:2645 over the R.C.C. slab including

cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of

cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with proprietary water proofing compound

conforming to IS:2645

(c) Crack Repairs:-Crack filling using fiber reinforced polymer modified mortar after openning

crack in "V" grove, Making Surface dust free, with a bond coat of polymer as per the data sheet for

crack repairing cracks less than 10mm,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing compound confirming to IS:2645 & top

smooth finished with trowel with false chequered marking of 300 mm.size.The treatment is carried

along the vertical surface of the parapet & other adjoining wall up to height of about 300 mm in a

shape of quarter round vata Incl. curing etc. Comp. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm. (d) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and for final test. All above operations to be

down in order and as directed and specified by the engineer-in-charge. With average thickness of

120 mm and minimum thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

NOTE :- (1) The whole work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma duly stamped (2) The rate

shall include for work at all floors & conducting water proof test as directed. Unit Rate of

32 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm 2818.83 SMT. 765.97

broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using white cement including rounding off

junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc.

as directed.

33 Providing & fixing colouron galvaniced steel, zinc / aluminium alluscoated sheet 0.80 mm. thick 546.37 SMT. 1103.93

roofing fixed with gslvanised grom J or L hook bolts and bolt 8mm dia with bituman and impet

washer filled withwhite lead etc. Excluding the cost of purlins rafter and trusses.

SHEDULE B Page

Item Rate in

Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

No. Figures

34 Providing & Fixing 2 mm thick Solid Polycarbonate sheet for expation joint cover & side wall 252.70 SMT. 1974.55

expation joint covered with surface of the sheet is coated with an anti-UV Co-extrusion layer

having good weather resistance, it can maintain its optical properties and mechanical performance

for a long time. Fasting is usually done by screws. , The fastening screws should be inserted about

150 mm apart and 200mm apart Along the supporting wall or rcc mamber or internal purlin and

edge pulin.All fixing holes with diameter at least 2 mm larger than screw must be predrilled into

each screw location. The screws should be 6mm diameter with length according to sheet thickness

and corrosion resistant, with at least heavy duty hot dripped galvanized or stainless steel. Excluding

the cost of purlins rafter and trusses with scaffolding.

35 Providing and fixing rebar of following diameter using chemical grout of 2172.00 NOS. 161.60

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments, tools,

material, labour, etc. Standard procedure as mentioned in manufacturer's specifications

shall be strictly followed, which shall be submitted and got approved from the authority prior

to start of work. The rate shall also include cost of drilling of hole of required diameter

and depth as mentioned in manufacturer's specification, cleaning the hole with required air

blower and other necessary tools and tackles, positioning, providing and grouting chemical,

allied fixtures and fasteners, etc. but excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and equipments, etc. complete as directed

by the engineer-in-charge. 8 MM DIA BAR,10 MM DIA BAR,12 MM DIA BAR

36 Crack Repairs:-Crack filling using fiber reinforced polymer modified mortar after openning crack 740.00 RMT. 202.00

in "V" grove, Making Surface dust free, with a bond coat of polymer as per the data sheet for crack

repairing cracks less than 10mm

37 Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap 28.00 No 3998.02

including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) inculding

Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and

rubber buffers. (B) Black plastic seal and cover inculding of Providing and fixing 12.5 Litres low

level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead

valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle

unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain

enamelled flush bend including cutting holes in walls and making good the same connecting the

flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A)

Vitreous China (I) In white colour . (A) vitreous China Pattern :(i) in white colour

38 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm Including 47.00 No 1426.85

Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the

trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.

Including of Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand)a, pair of white

vitreous China 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet. (A)

Vitreous China.(I) Long pattern = White colour

39 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted 75.00 No 2067.87

white including sutting holes and making good the Providing and fixing C.P. brass waste for

washbasin or sink. (A) 32mmdia.,Providing and fixing pillar tap, capstan head, screw down high

pressure with screws, shanks and back nuts. (i) 15mm dia.,Providing and fixing brass screw

down stop tap.(A) 15mm dia..(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

40 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the 175.00 No 585.36

following nominal diameter of self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

41 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished 148.00 No 186.82

bright. (i) 15mm dia.

42 Providing and fixing Gun metal check or non-return fullway wheel valve. 25mm. dia. 16.00 No 420.63

SHEDULE B Page

Item Rate in

Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

No. Figures

43 Providing and fixing Gun metal check or non-return fullway wheel valve. 40mm. dia. 8.00 No 663.42

44 Providing and fixing chromium plated brass half trun flush cock of approved quality including 75.00 No 263.77

fixing in pipe line etc. complete.(ii) 25mm dia.

45 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (A) 25mm. dia. 16.00 No 132.88

46 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold 638.80 RMT. 72.64

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.

47 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold 471.20 RMT. 91.83

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

48 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold 420.00 RMT. 148.11

water Including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

49 Providing, laying and jointing in true line and level 110mm diametre U.P.V.C (Type B) 736.00 RMT. 857.65

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent cement including cost of all

materials.

50 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. 24.00 No 1246.91

cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B)

150mm x 100mm size P or R type

51 Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 16.00 No. 2017.19

450mm C.I. horizontal grating wih frame complete.

52 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with 18.00 No 2932.92

briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for

single pipe line.

53 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes 180.00 RMT. 254.89

I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar

joints including testing of joints complete. (B) 150 mm dia.

54 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes 100.00 RMT. 356.73

I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar

joints including testing of joints complete.(C) 250 mm dia

SHEDULE B Page

Item Rate in

Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

No. Figures

55 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 26.00 No. 101.90

56 Providing and fixing in position cowel went to pipes.(C) 100mm dia 16.00 No. 505.17

57 Providing erecting and fixing double coated PVC. (ISI) water tank of required capacity each with 18000.00 LIT. 3.94

all necessary fittings and connection etc. complete on terrace.

58 Providing and fixing, repairing of Teak wood doors 35 mm thick shutters for Doors including two 60.48 SMT. 2828.00

coats of oil paint to wooden surfaces and Stainless steel decorative type designs all necessary

fixtures / fastening with anchor fastening of teak wood frame all labour etc.as directed by engineer

in charge.

59 Providing and fixing, repairing of windows with changing/ replacing Aluminium Frames, 5mm 236.23 SMT. 2474.50

frosted glass, all necessary fittings and fixtures and transparent silicon sealant glass fixing to frame

all labour etc.as directed by engineer in charge.

60 Providing & Fixing 3 mm thick Bitumin sheet for waterproofing of terrace and similar surface to 604.80 SMT. 1509.95

protect from water infiltration into the surface. The whole surface should be thoroughly cleaned

from any debris, dried and protruding surfaces should be removed. All crack should be properly

filled with recommended crack filling material. Then the bitumin primer should be applied to the

surface for adhesion of membrane. The primer should be allowed to dry completely before putting

sheet. The membrane should be unrolled and placed onto the surface with an overlap of approx.

100mm to 150mm between each sheet. The membrane should be pressed down firmly, ensuring

that there are no air pockets or bubbles. The seams between the sheets of the membrane should be

sealed with a bitumin sealer. The sealer should be applied in a thin, even layer, ensuring that there

are no gaps or bubbles.

Total:-

Rupees Two Crore Sixty Lakh FiftyEight Thousand One Hundred SeventyNine Paise Three Only

I we am / are willing to carry out the work at …................................ % above/ Below percent ( Should Be writen in figures And words) of the estimated rate

mentioned above. Amount of my / our tender works out as under.

Estimated Amount Put to tender. 2,60,58,179.03 Estimated Amount Put to tender.

Deduct…........ % Below Deduct…........ % Below

In Words In Words

(1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be

(2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3) GST and Income tax TDS will be deducted at a source while making payments of bills

(4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Bidder

Executive Engineer,

Tapi R & B Division

SHEDULE B Page