ELECTRIFICATION OF ANGANWADI NO.67

Amount

GENERAL WIRING

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core copper conductor cable 650V grade,including providing Switch Board main and continuous earthing with No. 14 SWG copper, required qty of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white or off white) etc. up to and including 6 A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. Single control light point with 6A, 3 plate ceiling rose

- Do - Single control light point without ceiling rose

- Do - Single control ceiling fan point without ceiling rose & with socket size stepped electronic regulator.

- Do -Call bell point with piano type 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end

- Do - Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

- Do- Independent plug

Supply, conveyance, installation, testing and commissioning of pre-wired light fitting made from 0.5mmCRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.20W LED light fittings

SCITC Street light fitting with 24W LED Streetlight with Liminiare efficeincy 105 lm/W rugged aluminium alloy housing with all accessories complete IP66 ( LUKER make 24W 6500K, Lumen/watt>105 Cat. No: LST24 or equivalent make ) on existing pipe and giving connection with 24/0.20mm 3 core flex wire as required..

Supply and fixing High pressure die cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, Polycarbonate cover 10W LED fixture to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required. Wipro make LED Bulk head fitting LW 07 rated IP65 or equivalent make

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder without shade and giving connection etc as required

Supply and providing the following types and power rated lamps in the existing fittings as required 9W LED Bulb in the existing fittings

Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200 mm sweep (Category B) - 5 Star rated

Supply, conveyance, installation, testing and commissioning wall mounting fan of the following sizes using mounting brackets supplied along with the fan and giving connection with existing wire.400 mm sweep Orient make metal leaf

Charges for cutting holes suitable for accommodating exhaust fans of sizes up to 305 mm sweep including plastering, colour washing etc. as required.

Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. 200 mm, single phase, light duty exhaust fan in plastic body

Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Call bell

Supplying and fixing the following sizes of M.S. Boxes made out of 1.60 mm thick sheet painted grey (both inside and outside ) in surface/ recess including phenolic laminated sheet covers of thicknesses noted along with screwed to the box as front cover with steel screws, cup washers etc. making good the surface, painting /colour washing etc. as required. 100 mm x 150 mm x 50mm with 3 mm sheet

Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required ( RoHS)3 module metal box in recess

-do - 8 module metal box in recess

Supply & Fixing the following types/ sizes of front plates on the existing modular boxes. (RoHS)3module white/ off-white

- do - 8 module white/ off-white

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (Group B)6 A SP 1 way switch

-do - 16 A SP 1 way switch

- do - 6 A Universal socket

- do - 6 / 16 A combined socket

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.20 mm dia light gauge

- do - 25 mm dia light gauge

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.50 sq mm 2 run

2.50 sq mm 2 run

4.00 sq mm 2 run

6.00 sq mm 2 run

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 8 way single phase double cover (IP 42/43)

-do- DP enclosure for independent mounting of MCB

Supply and installation of the following accessories suitable for 50 Hz AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required 40 A double pole mini break isolator

-do - 25 A, 2 pole, 30 mA RCCB

- do - 6 A to 25 A, 10 kA, DP MCB (C curve)

- do - 6 A to 32 A, 10 kA, SP MCB (C curve)

Supply and providing plate earthing as per IS 3043 with 600x600x6.3 mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary soil)

Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection chamber of earth pit as required 300 x 300 x 6 mm cast iron gully trap with covering

Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.2 x 25 x 3 mm GI strip

Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.25 x 3 mm GI strip

Supply and laying the following sizes of bare copper laid 0.60 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil)3.15 mm copper conductor (10 SWG)

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.2.00 mm copper conductor (14 SWG)

- do - 3.15 mm copper conductor (10 SWG)

supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

- do - 3.15 mm (10 SWG)

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required . 12 x 3mm brass bolt & nut

do - 25 x 6mm brass bolt & nut

Supplying , threading , laying and jointing of the following sizes of 'B' class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads./UG cables15 mm dia

Supply and fixing the following accessories in the existing meter board and giving connections etc.63 A, 415 V Backelite fuse fitting

- do - 35 to 63 A, bolted offset tag type fuse link

6 A-80A DIN type fuse link

-do - 63 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

- do - S & F iron hook grouted on wall for binding GI wire

Supply and clamping the following sizes of "B" class GI pipe on wall with all required accessories & clamps etc., including cutting and making good the walls, painting the exposed portions etc., as protective covering to earth leads / cables. 32mm dia (Service pipe)

Fabrication, supply & installation of dust and vermin proof, wall mounting, Hot press moulded SMC / Engineering plastic meter box of folowing size suitable for fixing KSEB meter,fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.Sintex make GS - MB 3525size 350x250x150 mm or equvalent make

Supply, conveyance, installation, testing and commissioning of 1 HP Horizontal Openwell Submersible Motor pump set working voltage 1 phase, 240V, 50Hz , Ac Supply ,with head range up to 16 Mtr , delivery size 32/25 mm ( Kirlosker make Model KOS -116M/ or equivalent make ) including standard control panel etc. complete.

supply, threading, laying and jointing 32 mm 10 kg HD pipe with all accessories for delivey pipe

32mm or nearest size Hose Collar

Supply and providing 12mm nylon rope

Supply and drawing PVC insulated & sheathed 650/1100 V grade 2.5 sq.mm 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.

Supply and fixing 32mm Ball Valve

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required (for the installation of outdoor light fittings).25 mm dia with clamps made from 20 x 3 mm MS flat

Supply,Installation, testing and Commissioning of 1050 VA Sine wave Inverter with 1 No 100 Ah Exide or equivalent make Inva Tubular Battary and giving connections .

KSEB Charges for converting for new service connection including , application fee ,OYEC, CD, etc. actual amount paid on production of orginal invoice or challan

Fee for preparation of estimate , Supervision of work, Measurement of work and preparation of bill for the work ( 3 % of estimate amount )

Fee for CheckMeasurement of work ( 1 % of estimate amount )

PEE AR POWERON

POWERMAN ELECTRICALS

AIRMECH AIRCONDITIONING ENGINEERS

Bidder Name

POWERMAN ELECTRICALS

PEE AR POWERON

All Star Electricals

AIRMECH AIRCONDITIONING ENGINEERS