PERIODICAL MAINT SERVICES OF LIFT INSTALLATIONS, AC PLANT INSTALLATION AND AHU ROOMS AT NAVAL BASE KOCHI, REPAIRS / REPLACEMENT OF JOINT FILLING / CONSTRUCTION JOINTS AT TAXI TRACK / DISPERSAL LINE MARKING PAINTING AT NAE NEDUMBASSERY

Amount

Demolition of brick work or stone/boulder masonry, laid built in cement mortor complete all as specified and asdirected.

Material and labour precast cement concrete solid block type B1 1:2:4 (using 20mm graded stone aggregate) exc 10cm in width and setting in cement morter 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone wall/ceiling surfaces etc including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and as directed.

Material and labour rendering 15mm thick on fair faces wall of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. .

Material and labour for 5 mm thick rendering in cement mortar 1:4, on fair faces of ceiling/ concrete surfaces complete as specified.

Material and labour for 10mm thick cement mortar plaster on brick wall in concrete surface in CM 1:6 finished even and smooth wihout using extra cement, complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coat of antifungal weather proof paint of required shade over a coat of primer using modern tools, and spray technique complete all as specified and as directed.

Material and labour for preparation newly plasterd wall surfaces and applying two coat of distemper oil emulsion over a coat of primer using mordern tools, and spray technique complete all as specified and as directed.

Material and labour for preparation newly plasterd surfaces of ceiling and applying two coat of distemper white or tinted over a coat of primer using mordern tools, and spray technique complete all as specified and as directed.

Material and labour for complete removal of existing treatment by mechanical jet water cleaning /scrubbing machine with steel brush and applying two coat of antifungal weather proof paint of required shade over a coat of primer to wall surfaces using modern tools, and spray technique complete all as specified and as directed.

Material and labour for preparing old painted surfaces of walls by brushing/rubbing down and applying one coat of antifungal paint on old decorated surfaces on walls including cornices etc complete all as specified and as directed.

Material and labour for preparing surfaces plastered or unplastered by washing,brooming down or wire brushing and applying one coat of oil emulsion distemper on old decorated surfaces on walls including cornices etc complete all as specified and as directed.

Material and labour for complete removal of existing treatment by mechanical jet spray /grinder and applying two coats of distemper oil emulsion over a coat of primer through authorised company applicator using mordern tools, and spray technique complete all as specified and as directed.

Material and labour for preparing surfaces plastered or unplastered surfaces of walls by washing,brooming down or wire brushing and applying one coat of cement based paint on old decorated surfaces on walls including cornices etc complete all as specified and as directed.

Material and labour for complete removal of existing treatment by mechanical jet water cleaning /scrubbing machine with steel brush and applying two coat of cement based paint over chalk whitening on walls including cornices etc complete all as specified and directed. to entire satisfaction of Engineer-in-Charge.

Material and labour preparation of new steel surfaces and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation and applying of one coat of synthetic enamel painting on old steel surface of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and as directed.

Material and labour for preparation and one coat of synthetic enamel painting on old wooden surface of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed.

Material and labour preparation of new wooden surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed. .

Taking down chowkat with shutters (without taking off shutters from the frame) n.exc 1.5 sqm complete all as specified and as directed. .

Taking down chowkat with shutters (without taking off shutters from the frame) exc 1.5 sqm but n. exc 4.0 sqm complete all as specified and as directed. .

Supply and fix powder coated aluminium frame for Door,windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. .

Supply and fix powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) , hinges type B-21 100mm long(2 Nos) suitable handle (1 No) complete all as specified and as directed.

Supply and fix powder coated( minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges(150mm size-3 nos), anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Material and labour veneered decorative plywood 9mm thick, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame complete all as specified and as directed.

Supply and fix in repair mortize lock Brass type of size 75mm 4 levers vertical type,complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips etc. complete all as specified and as directed.

Supply and fix in repairs 4mm thick oridinary glass pane, not exec 0.5 sqm each pane, glazing with oil putty complete all as specified and as directed.

Supply and fix sheet glass, ordinary quality 4.8 mm thick and glazing with alu bedding/ oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed. .

Dismantling of wall and ceiling boards( fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified and as directed.

Supply and fix anodised aluminium snap grid frame work for false ceiling all as specified size of grid 605 x 605 mm including hanging with mild steel 2mm dia wire in suitable length complete all as specified and as directed. .

Providing and fixing gypsum board 600mmX600mmX12mm thick in ceiling with screw as per manufacturers instructions complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortor bedding complete all as specified and asdirected.

Material and labour for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) as in flooring including finishing cement concrete rough surface without using extra cement, complete all as specified and directed

Material and labour coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM 1:4 complete all as specified and as directed. .

Supply and fix glazed ceramic coloured tiles 300x250x7mm thick or 450/350/7mm thick .in dado incl 10mm thick back coat in CM 1:4 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment complete all as specified and as directed. .

Material and labour for vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slury and pointed in white or coloured to match the tiles over 15 mm thick screed bed or bedding layer of mortar 1:6 for layig floor finish complete all as specified and as directed.

Material and labour for granite (of any type) tiles 20mm thick machine cut in floor, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 15 mm thick screed bed or bedding layer of mortar 1:6 for layig floor finishing including grinding and polishing complete all as specified and as directed..

Material and labour for granite (of any type) tiles 20mm thick machine cut in skirting/dado or wall laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 10mm thick back coat in CM 1:4 etc finishing including grinding and polishing complete all as specified and as directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick, screed bed or bedding layer of 20mm thick cement morter 1:6 laid and jointed with gray cement slurry mixed wirh pigment to match the shade of the slab including rubbing and polishing etc.complete all as specified and as directed.

Material and labour for chequered cement concrete tiles of size 30cmx30cm x25mm thick, with mix of grey cement and pigments, set, jointed and pointed in neat cement slurry and pointed with mixture of grey cement and pigments in floors including 20mm thick screed bed in CM 1:6 complete all as specified and as directed. .

Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Grade with grey cement & pigment etc including 50mm thick bedding with 6 to 10 mm graded coarse aggregate complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickeness(below or above ground level) complete all as specified and as directed. .

Material and labour for 75 mm thick cement concrete Type C2 1:3:6 (40 mm graded aggre-gate) as in plinth protection / sub-floors, sub-bases, floors and paving, etc. complete all as specified and as directed.

Material and labour providing 100mm cement concrete 1:4:8 Type D2 (40 mm graded aggregate) in cement concrete in sub-floors, sub-bases, floors and paving, etc. complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

Supply and fix prepainted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410-W(Gde-E-250) Quality 'A' complete all as specified and as directed.

Supply and fix mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe-410-W(Gde- E-250) quality-B for cover of cable duct and all other complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M. S square tube, supplying & fixing in opening as per specification & drawing as mentioned in sectio 8 of SSR Part- II 2010 complete all as specified and as directed.

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back facesupplying & fixing in frame at site as per specification & drawing as mentioned in sectio 8 of SSR Part II 2010 complete all as specified and as directed.

Supply and fix second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and fix 40 mm thick second class hard wood, plain framed , panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fixed to chowkhats complete all as specified and as directed.

Supply and fix 30 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fix in repair Aluminium anodised, barrel tower bolts of extruded section and fixed of size 150mm complete all as specified and as directed.

Supply and fix in repair aluminium anodised, barrel tower bolts of extruded section and fixed of size 100 mm complete all as specified and as directed.

Supply and fix in repair Butt hinges, medium weight, cold rolled mild steel 100mm size and fixed complete all as specified and as directed.

Supply and fix in repair aluminium alloy, anodised, sliding door bolt of size 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fix in repair Extruded aluminium alloy handles, fabricated 125mm size and fixed complete all as specified and as directed.

Supply and fix in repairs vitreous china wash basin white flat back size 580 x 450 mm excluding taps, but including cutting for and pinning in ends of brackets, waste pipe and brackets all as specified and as directed.

Supply and fix in repairs Vitreous China wash down water closet pan (Pedestal pattern) white including connection to drain and to flushing pipe,plastic water closet seat cover with clamp complete all as specified and as directed.

Supply and fix in repair PVC low level flushing cistern symphonic action type, low level white 10 litres capacity with ISI mark including inlet ball valve float, handle and brackets and connection to pipes etc. complete as specified.

Supply and fix in repair stailess steel grating 100 mm dia in floor complete all as specified and as directed.

Supply and fix in repair chromium plated bib taps, cast copper alloy, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube in repairs complete all as specified and as directed. .

Supply and fix in repairs concealed stop cock regular body, quarter turn with flange chromium plated fancy type of size 15mm complete all as specified and as directed.

Supply and fix in repair cast copper alloy chromium plated fancy type pillar tap 15mm dia fixed in repairs complete all as specified and as directed.

Supply and fix in repairs brass chromium plated tubular towel rail 20mm dia D type 60cm long complete all as specified and as directed.

Supply and fix in repair PVC connection 15mm with PTMT nuts of length 450mm long and taking down old one complete all as specified and as directed.

Supply and fix in repairs CP shower rose fancy type 125mm size complete all as specified and as directed.

Supply and fix in repair PVC health faucet with 1 meter flexible tube including necessary fitings complete all as specified and as directed.

Supply and fix in repairs ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed.

Supply and fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends on CPVC pipe incl necessry fittings of size 20mm bore dia complete all as specified and as directed.

Taking up or down 15mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site as directed.

Supply and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

Taking up or down 20mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site as directed.

Supply and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Dismantling water tanks Exc 250 ltrs capacity & n exc 500 ltrs capacity and removing from site complete all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tanks (ISI marked) of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 complete all as specified and as directed.

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr in depth for foundation etc or for shafts , wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out soft/loose soil, complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed wave, AC or reinforced concrete) set in cement mortar 150mm dia, complete all as specified and as directed.

Material and labour cement concrete 1:3:6 type C2 concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 150mm dia pipe, complete all as specified and as directed.

Supply and fix 150 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints including connecting fittings, laid in floors or trenches complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed wave, AC or reinforced concrete) set in cement mortar 100 mm dia, complete all as specified and as directed.

Supply and fix110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints including connecting fittings, laid in floors or trenches complete all as specified and as directed.

Supply and fix in repair PVC (SWR) Bend 110 mm Dia complete all as specified and as directed. .

Supply and fix in repair PVC (SWR) vent cowl 110mm bore complete all as specified and as directed.

Supply and fix in repair PVC (SWR) vent cowl 75mm bore complete all as specified and as directed.

Returning filling in including spreading, levelling , watering and well ramming n exc. 25 cm in layers (Soil) complete all as specified and as directed. .

Removal of excavated surplus (soils) at a distance exc. 1.5 Km but n. exc 5.0 Km complete all as specified and as directed.

Supply and fixin repairs PVC (SWR) floor trap, 75mm bore, plain with grating including joints with solvent cement complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc.complete all as specified and as directed.

Supply and fix PVC eaves gutter heavy duty half round 200mm dia including drop end with all necessary flat Iron fitting complete all as specified and as directed. .

Supply and fix 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints including connecting fittings, fixed on walls complete all as specified and as directed.

Supply and fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275.complete all as specified and as directed.

Supply and fix in repair steel rolling shutters push pull or manual type having thickness of lath 1.25mm, with out ball bearing, as specified including top cover,anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete all as specified and as directed.

Supply and fix in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

Supply and fix in repair ball bearing for rolling shutters complete all as specified and as directed.

Supply and laying hume pipe septic tank of 10 user capacity designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified.including demolition of rusting unserviceable septic tank as directed.

Material and labour for removing the existing joint sealing completely by mechanical means and remove all the dust and laitance by blown dry by compressed air and prime the surface with primer 20 using a clean dry brush to required depth and apply masking tape on both sides of the joint exceeding 5mm & not exc 20mm width and min 15mm depth completely for uniformity and colpor 200 must be applied between 30 min and 02Hrs when the primer has become touch dry; the curing agent shall be mixed with the base component and mix for a min of 3 minutes and loaded into a sealent gun after removing the nozzle and cap and apply on the joint fully and make the filling flush and remove the masking tapes completly and allow to set for a min of 12Hrs to 16Hrs before accepting traffic complete all as specified and as directed. Note:-Color 200,primer 20 and backer rod will be measured and paid seperately

Supply only fosroc colpor 200 and primer 20 or equalent in Bostik/Sika Flex/master seal with all necessary accessories complete all as specified and as directed.

Supply and fix backer rod as per size(30mm,12mm & 8mm dia) as per site requirment complete all as per manufacture instructioins complete all as specified and as directed.

Material and labour for preparing concrete/bituminous surfaces of road/dispersal and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n exc 10cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Supply and spreading locally available dry River Sand for covering and cushioning of UG Cable in trenches complete all as specified and as directed

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and as directed

Supply laying and testingg XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm x 4 core complete all as specified and as directed

All as per item No 110 here-in-before but for cross-sectional area 16 sq. mm x 4 core complete all as specified and as directed

All as per item No 110 here-in-before but for cross-sectional area 35 sq. mm x 3.5 core complete all as specified and as directed

All as per item No 110 here-in-before but for cross-sectional area 120 sq. mm x 3.5 core complete all as specified and as directed

All as per item No 110 here-in-before but for cross-sectional area 150 sq. mm x 3.5 core complete all as specified and as directed

Supplying laying, jointing and testing Tubes, 'light grade' galvanised,with all fittings and fixed complete to walls or laid under road for passing cables or used as pole for installation of LED Post top lantern complete of size 50mm complete all as specified and as directed

All as per item No 115 here-in-before but of size 40 mm bore complete all as specified and as directed

All as per item No 115 here-in-before but of size 80 mm bore complete all as specified and as directed

Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and as directed.

Supply and fix LED street light fitting 35W, 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant incl. thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed

Supply and fix LED street light fitting 60W, 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant incl. thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed

Supply and fix LED street light fitting 70W, 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant incl. thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed

Supply and fix LED flood light 70 Watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed

Supply and fix LED flood light 100 Watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed

Supply and fix post top lantern LED type 20W 230V AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed

Supply and fix LED luminaire 600mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling incl. connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed

Supply and fix round shape 12 watt 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling incl. connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

Supply and fix round shape 15 watt 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling incl. connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

Material and labour for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S clamps, bolts and nuts of approved size, for LT, 20x15cm size ncluding dismanting old one complete all as specified and as directed.

Supply and fix 240V, 10KA 'B' curve MCB of single poles and current carrying capacity 6 to 32 Amps, in the MCB DB complete with connection testing and commissioning complete all as specified and as directed

Material and labour for Earthing complete with GI Steel earth plate electrode 600 × 600 × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) earth plate paced on all side with charcoal mixed with salt to a thickness of 150mm in layers,with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth wire of size 4 mm, dia up to 7.5 Rm by means of bolts, nuts, check soldered and revetted to earth plate. Earth wire will be protected by using 40mm dia bore GI pipe light grade. The earthing includes PCC Pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 mtrs etc complete all as shown in electrical plate No. 3 of SSR Part-I 2009,connected to earthing test point all as specified or indicated including testing on complete all as specified and as directed

All as per item No 130 but using galvanised Earth plate of 600 x 600 x 6mm with iron strip 25×4mm as earthing lead complete all as specified and as directed

Attending internal/External electric complaints for maintenance/breakdown round the clock for maintenance, checking, fault finding ad rectification of fault in LT Panels overhead HT/LT Lines, HT/LT underground cables, Transformers, Switchgears internal electric faults, fans etc including internal/External water supply complaints and carry out repairs and resume electric supply and water supply complete all as specified and as directed by Engr in Charge. Notes:- (a) Day to day complaint rectified by the electrician shall be written in complaint register and complaint document slip, rectified complaints only shall be measured and paid. Complaint attender shall have minimum qulification of ITI Electrician cum pumber having 2 years experiance of same nature of work is to be employed. (b) The spares required for rectification of faults shall be measured under relevent items. (c) All necessory tools shall be made available with the tecnician while executing the complaint. (d) All consumeables other than mentioned in schedules are deemed to be included in the rate quoted. (e) All kind of transport for the complaint attender/materials and mobile/cell charges are deeme to be included in the rate quoted. (f) All safety aspects are to be taken and if any accident/hazardous incidents happen during execution shall be the sole resposibility of the contractor. (g) Penalty of Rs 500.00/ for minor complaint and Rs.1000/- for major complaint will be recoverd from the contractor if the complaint will not be rectified within 24 hrs.

Supply and fix in replacement Modular switch 1 way 6A,1 module, complete all as specified and as directed

Supply and fix in replacement Modular switch 2 way 6A,1 module complete all as specified and as directed.

Supply and fix in replacement Modular Bell push 6A 1 module complete all as specified and as directed.

Supply and fix in replacement Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.,

Supply and fix in replacement Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fix in replacement Modular Fan step regulator, 120W - 2 module complete all as specified and as directed.

Material and labour for one light point wiring on surface/cieling/trusses/concealed controlled by one switch with PVC single core sheathed copper conductor multistranded cables FRLS 1.5 sq. mm size drawn through and including PVC conduit of suitable size and all acessories, fire resitant, ISI Marked including 2 mm thick 60mm depth GI sheet pressed terminal box (recessed) with 3mm thick laminayed hylem sheet top cover including PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sq.as earth continuty conductor and makingn good the disturbed surfaces of walls/floors/ceiling etc complete all as specified and as directed.

All as per item No 139 here-in-before but one ceiling fan point controlled by one switch complete all as specified and as directed.

All as per item No 139 here-in-before but one exhaust fan point controlled by one switch complete all as specified and as directed.

All as per item No 139 here-in-before but one 3 pin socket outlet 5 amps on the independent board complete all as specified and as directed.

All as per item No 139 here-in-before but with cable 2.5 sqmm for One 3/5 pin socket outlet 15 amps on the independent board complete all as specified and as directed.

Material and labour for factory reconditioned hermatically sealed compressor unit suitable for water cooler upto 120 ltrs, ozone based filter type hot and cold water cooler 85 ltrs, Refrigerator upto 310 ltrs, Split type Airconditioner upto 3 TR for exchange of the existing unserviceable sealed compressor unit including initial charging of gas and oil complete all as specified and as directed.

Supply and fix in repair condensing coil made out of copper tube and aluminium fins suitable for Split AC upto 3 TR, water cooler upto 120 ltrs, Refrigerator upto 310 ltrs including necessory brazing , gas charging, leak testing, vaccumising etc complete all as specified and as directed.

Supply and charging refrigerant gas upto required level including connected works such as pressure testing leak test with nitrogen before filling refrigerant gas complete for split AC upto 3 TR, water cooler upto 120 ltrs, ozone based filter type hot and cold water cooler 85 ltrs, Refrigerator upto 310 ltrs complete all as specified and as directed.

Material and labour for servicing of split AC indoor/outdoor unit upto 3 TR comprising through cleaning, lubricating of all moving parts, replacement of wornout screws, bolts, rectifying electric wiring, deffects etc to make the unit for smooth functioning complete all as specified and as directed.

Supply and replace capacitors 6/10/36 mfd complete all as specified and directed.

Supply and replace capacitors 80/100/120 mfd and 45 + 6 mfd complete all as specified and as directed.

Supply and replace starting relay suitable for Split AC upto 3 TR, Water cooler upto 120 ltrs, Refrigerator upto 310 ltrs cap complete all as specified and as directed.

Supply and replace thermostat unit hot/cold suitable for split AC upto 3 TR, water cooler upto 120 ltrs, Refrigerator upto 310 ltrs cap, ozone based filter type hot and cold water cooler 85 ltrs and Geysers 25/50 ltrs complete all as specified and as directed.

Supply and replace overload protector suitable for split AC upto 3 TR, water cooler upto 120 ltrs cap complete all as specified and as directed.

ELAN ENGINEERS (BID ID -3434916)

Super Constructions (BID ID -3440292)

WELTRONENGINEERINGSERVICES (BID ID -3439722)

THOMSONS CONSTRUCTIONS (BID ID -3434008)

Classic Builders (BID ID -3433621)

Phejays Agencies (BID ID -3434252)

sanjay Traders (BID ID -3434570)