Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAdmitted-Fee/PreQual/Technical/Finance | ₹6.3 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹6.4 L+₹8,174.31 (1.29%)Admitted-Fee/PreQual/Technical/Finance PARACKAT HOUSE KAPRASSERY NEDUMBASSERY PO | ₹6.4 L+₹8,174.31 (1.29%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | L3₹6.5 L+₹13,698.67 (2.16%)Admitted-Fee/PreQual/Technical/Finance | ₹6.5 L+₹13,698.67 (2.16%) | L3 | Admitted-Fee/PreQual/Technical/Finance |
| 4 | L4₹6.8 L+₹48,602.48 (7.68%)Admitted-Fee/PreQual/Technical/Finance | ₹6.8 L+₹48,602.48 (7.68%) | L4 | Admitted-Fee/PreQual/Technical/Finance |
| 5 | L5₹7.6 L+₹1.3 L (20.2%)Admitted-Fee/PreQual/Technical/Finance | ₹7.6 L+₹1.3 L (20.2%) | L5 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | C P Ajish L6 | sirajudheen L3 | SUJITH BHASKARAN L2 | muhammed aadhil hussain L4 | shiju PP L5 | SALIH M K L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00TRUSSWORK | |||||||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 2,000 | kg | 210 ₹4,20,000 | 164.93 ₹3,29,860 | 155 ₹3,10,000 Lowest | 170 ₹3,40,000 | 194 ₹3,88,000 | 161.44 ₹3,22,880 |
| 1.00 | 13.63.1:Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work | 255 | sqm | 155 ₹39,525 | 129.34 ₹32,981.7 | 140 ₹35,700 | 50 ₹12,750 Lowest | 152 ₹38,760 | 126.59 ₹32,280.45 |
| 1.00 | OD105132/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required.(Modified 12.50) | 90 | sqm | 700 ₹63,000 | 528.76 ₹47,588.4 | 600 ₹54,000 | 610 ₹54,900 | 622 ₹55,980 | 517.56 ₹46,580.4 Lowest |
| 1.00 | OD105131/2026-2027:Providing and fixing rain water gutter semi circular section using 110mm# 6kgf PVC pipe
including all necessary
fittings with 32x5mm flat supporting at 1m intervals etc. complete as per the direction of
Engineer in charge at site | 40 | metre | 300 ₹12,000 | 254.14 ₹10,165.6 | 350 ₹14,000 | 280 ₹11,200 | 299 ₹11,960 | 248.75 ₹9,950 Lowest |
| 1.00 | 51.2.4:Filling with Sand <br> Supplying and filling sand in foundation trenches of culvert for stabilizing the top clay layer including watering, ramming, consolidating and dressing, etc complete for improving bearing capacity of soil. | 1 | cum | 3,055 ₹3,055 | 2,585.83 ₹2,585.83 | 2,800 ₹2,800 | 30,454 ₹30,454 | 3,045 ₹3,045 | 2,531.01 ₹2,531.01 Lowest |
| 1.01 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 53 | sqm | 1,780 ₹94,340 | 1,508.24 ₹79,936.72 | 1,500 ₹79,500 | 1,450 ₹76,850 Lowest | 1,776 ₹94,128 | 1,476.26 ₹78,241.78 |
| 1.01 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 436.01 | kg | 178 ₹77,610.14 | 151.47 ₹66,042.74 | 140 ₹61,041.68 Lowest | 170 ₹74,122.04 | 178 ₹77,610.14 | 148.27 ₹64,647.5 |
| 1.01 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 1.04 | cum | 2,130 ₹2,215.2 | 1,808.23 ₹1,880.56 | 1,800 ₹1,872 | 2,129 ₹2,214.16 | 2,129 ₹2,214.16 | 1,769.9 ₹1,840.7 Lowest |
| 1.01 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 5.2 | cum | 7,715 ₹40,118 | 6,548.79 ₹34,053.71 | 7,000 ₹36,400 | 7,000 ₹36,400 | 7,713 ₹40,107.6 | 6,409.95 ₹33,331.74 Lowest |
Tender Value
₹7.6 L
EMD Value
₹19,051
Closing Date
20 Aug 2026, 6:00 pmClosed
THE ASSISTANT EXECUTIVE ENGINEER
O/o THE ASSISTANT EXECUTIVE ENGINEER,THRIKKAKARA MUNICIPALITY
Proj No- 305/2026-27 Thrikkakkara Municipality -Anganwadi No- 9 Truss Work at Ward 12
2026_LSGD_865103_13
LIDEW/AEE/ET/13/2026
Open Tender
Civil Works - Others
Item Rate
180 days
THRIKKAKARA
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,685
₹19,051
Yes
3 Sept 2026
11 Aug 2026
22 Aug 2026
11 Aug 2026
20 Aug 2026
11 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1TRUSSWORK | |||||
| 1.001 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | - | kg | - | - |
| 1.002 | 13.63.1:Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work | - | sqm | - | - |
| 1.003 | OD105132/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required.(Modified 12.50) | - | sqm | - | - |
| 1.004 | OD105131/2026-2027:Providing and fixing rain water gutter semi circular section using 110mm# 6kgf PVC pipe
including all necessary
fittings with 32x5mm flat supporting at 1m intervals etc. complete as per the direction of
Engineer in charge at site | - | metre | - | - |
| 1.005 | 51.2.4:Filling with Sand <br> Supplying and filling sand in foundation trenches of culvert for stabilizing the top clay layer including watering, ramming, consolidating and dressing, etc complete for improving bearing capacity of soil. | - | cum | - | - |
| 1.006 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | - | sqm | - | - |
| 1.007 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 0.8 | kg | - | - |
| 1.008 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | - | cum | - | - |
| 1.009 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | - | cum | - | - |
stage.html
html • 0.03 MB
finance_1464099.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.23 MB
Tendernotice_2.pdf
PDF • 0.18 MB
Tendernotice_3.pdf
PDF • 0.10 MB
Tendernotice_4.pdf
PDF • 0.18 MB
Tendernotice_5.pdf
PDF • 0.30 MB
Tendernotice_6.pdf
PDF • 0.28 MB
viewsbd13.pdf
Tender Documents • 1.80 MB
BOQ_1464099.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .