Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.4 LAccepted-AOC NEW HARIGAON BEHIND BASE HOSP PO NIKAMUL TEZPUR ASSAM 784001 | SONITPUR | ASSAM | 784001 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹49.5 L+₹3.0 L (6.51%)Rejected-Finance SAIKIA CHUBURI BORJHAR DEKARGAON SONITPUR ASSAM | SONITPUR | ASSAM | 784501 | L2 | Rejected-Finance NOT L1 | |
| 3 | L3₹51.9 L+₹5.5 L (11.9%)Rejected-Finance VILL BATABARI PO GHORAMARI DIST SONITPUR ASSAM 784105 | SONITPUR | ASSAM | 784105 | L3 | Rejected-Finance NOT L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TEZPUR
CERTAIN REPAIRS TO TECHNICAL STRUCTURES IN TECHNICAL AREA AND CERTAIN REPAIRS TO DISPERSAL AREA OF PAVEMENT AT AIR FORCE STATION TEZPUR UNDER GE AF TEZPUR
CERTAIN REPAIRS TO TECHNICAL STRUCTURES IN TECHNICAL AREA AND CERTAIN REPAIRS TO DISPERSAL AREA OF PAVEMENT AT AIR FORCE STATION TEZPUR UNDER GE AF TEZPUR
2023_MES_599110_1
GE/AF/TEZ/8862/E8
Open Tender
Civil Works - Others
Item Rate
180 days
TEZPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF TEZPUR
₹90,000
23 Aug 2023
29 May 2023
21 Jun 2023
29 May 2023
19 Jun 2023
7 Jun 2023
Amount
Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:4),including demolition of existing brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as specified and directed.
Materials and Labour for,2 mm thick,fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.,including dismantling of existing fibre glass reinforced translucent corrugated sheeting in roof coverings,complete all as specified and directed.
Supply and Fix,0.56 mm thick, plain aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) including dismantling existing plain or corrugated steel sheeting,any gauge, thickness,including Nainital or similar pattern roof coverings,complete all as specified and directed. Note:-The will be executed in technical structure(s) of roof height 8.00 Metres to 9.00 Metres (Approx) above floor level.Suitable arrangements as per MES Safety Code shall be made by the Contractor and the cost shall be deemed to included in the quoted rate.
Supply and Fix,0.71 mm thick plain aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter,drip and straight flashing (length and girth as fixed) including dismantling existing plain or corrugated steel sheeting,any gauge,thickness,including Nainital or similar pattern roof coverings,complete all as specified and directed. Note:-The will be executed in technical structure(s) of roof height 8.00 Metres to 9.00 Metres (Approx) above floor level.Suitable arrangements as per MES Safety Code shall be made by the Contractor and the cost shall be deemed to included in the quoted rate.
Materials and Labour for,100 mm wide,Bitumen Based Flashing Tapes, cold applied self- adhesive tapes with one side bitumen adhesive protected by release film and other side re-enforced aluminum foil, fixed on surfaces to prevent leakages,fill cracks, joints for various surface like metal,cement, asbestos, fiber, plastic, vinyl etc,complete all as specified and as directed.
Materials and Labour for,repair to holes (Not exceeding 2 mm dia.) in existing Galvalume or CGI sheets roofs of technical structure(s) by putting in silicon based sealent with manually operated guns as per manufacturer's instructions,complete all as specified and as directed. [Make:- M-Seal/Dr Fixit/Loctite] Note:-The will be executed in technical structure(s) of roof height upto 20.00 Metres (Approx) above floor level.Suitable arrangements as per MES Safety Code shall be made by the Contractor and the cost shall be deemed to included in the quoted rate.
Materials and Labour for,cleaning surfaces of concrete floor by picking,sweeping clean and washing down with water to remove dust, etc,filling up cracks,pores etc. with epoxy mortar and applying anti static epoxy based self levelling top coat of approved tint (semi gloss finish) to yield a thickness of 2 mm over a coat of epoxy primer,complete all as specified and directed.
Materials and Labour for rendering 15 mm thick,cement plaster, in cement mortar (1:6) on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing on wall and finishing surface even and smooth without using extra cement after taking down existing cement plaster from brick or concrete surfaces of any description including racking out joints,hacking for key, scrubbing down with water etc. and including preparation of new plastered surface on walls and applying three coats of white wash,complete all as specified and directed.
Material and Labour for preparation of old painted steel and iron surfaces over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (ordinary tint) on technical structures at a height not exceeding 10 Metres above floor level,complete all as specified and directed.
Material and Labour for preparation of old painted brick,stone,concrete,asbestos cement or plastered surfaces over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (ordinary tint),complete all as specified and directed.
Taking down carefully existing spherical wind driven turbine ventilator,outer dia of turbine 760 mm (Approx), doom dia. 380 mm (Approx) ,rotor dia. 655 mm (Approx), throat dia. 610 mm (Approx),height 360 mm (Approx) with 38 Nos (Approx) vanes including base plate of size 1600 mm x 1050 mm ( Approx.) from roofing,dismantaling of parts,cleaning throughly internally and externally,lubrication of bearing/bushes using fresh lubricant all as per OEMs reccommendations,replacement of defective nuts, bolts & washers,re-assembling and fixing in original position including testing and commissioning, complete all as specified and directed.
Supply,installation,testing and commissioning of spherical wind driven turbine ventilator with aluminium ventilator material and stainless steel (SS 304 Grade) hardware, 18 mm dia.SS center shaft with two nos self lubricated ball bearings,outer dia of turbine min 760 mm, doom dia. min. 380 mm,rotor dia. min 655 mm,throat dia. min 610 mm, height min 360 mm,with minimum 38 Nos of statically and dynamically balanced aluminium alloy vanes of 0.50 mm thickness,including provision of translucent UV stabilized FRP Base plate of size 1600 mm x 1050 mm (Approx.), complete all as specified and directed.
Resecuring or easing and adjusting existing hanger doors,sliding type with wheel tracks,size of door 5120 mm (W) x 9980 mm (H) each,without taking down, including minor repairs such as alignment of members, tightening of nut bolts in jointing cleats of members, easening of hinges/ pivots/sliding rails etc.,complete all as specified and directed. complete all as specified and directed. Note:- Cost of minor materials such as screw bolts, mild steel cleats, lubricants etc. shall be deemed to be inclusive in the quoted rate.
Repairs to joints in mild steel members of technical structures by tightening of nut bolts in jointing cleats of members,without taking down,including minor repairs such as alignment of members,repair welding,replacement of damaged nuts,washers etc.,complete all as specified and directed. Notes:- (i) Cost of minor materials such as nuts,washers,mild steel cleats etc.shall be deemed to be inclusive in the quoted rate. (ii) The height of the technical structure(s) are 9.00 Metres (Approx) above ground level. (iii) Suitable arrangements as per MES Safety Code shall be made by the Contractor and the cost shall be deemed to included in the quoted rate.
Repair to cracks(1mm-3mm wide) in existing rigid/flexible pavement of dispersal/ runway/ PTT by cleaning the cracks with hand brushes or water under pressure and drying with compressed air etc. filling in the cracks with epoxy mixture of araldite and hardener,araldite 02 (Two) parts and hardener 01 (one) parts,complete all as specified and as directed.
Repair to pot holes in existing rigid/flexible pavement of dispersal/ runway/ PTT upto 20 mm depth and superficial area not exc.320 sqmm each, cleaning the pot hole with hand brushes or water under pressure and drying with compressed air etc. filling the pot holes with epoxy mixture of araldite and hardener, araldite 02 (Two) parts and hardener 01 (one) parts, complete all as specified and as directed.
Repair to pot holes in existing rigid/flexible pavement of dispersal/ runway/ PTT upto 30 mm depth and superficial area not exc.1260 sqmm each, cleaning the pot hole with hand brushes or water under pressure and drying with compressed air etc. filling the pot holes with epoxy mixture of araldite and hardener, araldite 02 (Two) parts and hardener 01 (one) parts, complete all as specified and as directed.
Clearing shrubs,vegetation,grass,bush,weed etc. from sides of runway, PTT, Links and Dispersal Area, including disposal of rubbish/ useless materials to a distance not exceeding 50 m and depositing where directed a level not exc.1.5 m from the starting point, complete all as specified and directed. Notes:- (i) The work shall be executed by providing 01(One) Mazdoor (Unskilled category of worker). (ii) Duty hours register of the worker shall be maintained.
Materials and Labour for,raking out existing sealing compound from joints with using appropriate tools and mechanical means for joints of size 10-20 mm wide and 30 mm deep,cleaning the joints from sides, bottom and removing the loose particle of sealant dust, foreign matters etc.,with suitable tools and mechanical driven machine, drying the joints surface of moisture completely by means of mechanical driven air blower, including putting in sealing compound Grade B of approved make in joints as per manufacturer's instruction and cleaning the surface,complete all as specified and as directed. Note:- Additional depth of joint beyond 30 mm if any shall be filled with clean dry sand before putting in sealing compound.
Materials and Labour for, raking out existing joint sealant from Construction/ Dummy joints with using appropriate tools and mechanical means for joints of size 10-12 mm wide and 10 mm deep of sealant,including taking out compressible backer rod of dia 12-15 mm (Total depth 22-25 mm) from joints, cleaning the joints of side, bottom and removing the loose particle of sealant dust etc, with suitable tools and mechanical driven machine, drying the joints surface of moisture completely by means of mechanical driven air blower,applying one coat of primer and insert compressible cross linked polyurethane form back up rod, closed cell, medium density of appropriate dia as per site condition, putting in polyurethane joint sealant of approved make in joints as per manufacturer's instruction and cleaning the surface,complete all as specified and as directed.
Materials and Labour for, raking out existing joint sealant from Expansion joints with using appropriate tools and mechanical means for joints of size 20-25 mm wide and 20 mm deep of sealant,including taking out compressible backer rod of dia 25-30 mm (Total depth 45-50 mm) from joints, cleaning the joints of side, bottom and removing the loose particle of sealant dust etc, with suitable tools and mechanical driven machine, drying the joints surface of moisture completely by means of mechanical driven air blower,applying one coat of primer and insert compressible cross linked polyurethane form back up rod,closed cell, medium density of appropriate dia as per site condition, putting in polyurethane joint sealant of approved make in joints as per manufacturer's instructions and cleaning the surface,complete all as specified and as directed.
Materials and Labour for,cutting dummy joints in existing tarmac/PQC pavements with using appropriate tools and mechanical means for joints of size 15-20 mm wide and 50 mm deep,cleaning the joints from sides,bottom and removing the loose particle, dust, foreign materials etc,with suitable tools and mechanical driven machine, drying the joints surface of moisture completely by means of mechanical driven air blower, provision of compressible backer rod of dia 25-30 mm (Total depth 45-50 mm),including applying one coat of primer and insert compressible cross linked polyurethane form back up rod,closed cell, medium density of appropriate dia as per site condition,putting in polyurethane joint sealant of approved make in joints as per manufacturer's instructions,complete all as specified and as directed.
Materials and Labour for,cutting out defective portion of existing rigid pavement for depth 25 mm to 50mm from top surface of slab by mechanical means/manually by chiseling, make regular shape and size,removing all debries to a distance exceeding 100 Metres but not exceeding 200 Metres form starting point, loose particle to be cleaned with mechanical air blower,applying a coat of primer uniformly on the horizontal and vertical faces with bristle brush,filling with epoxy resin mortar (1:5) one part of epoxy resin and five parts of Quartz sand as per manufacturer's instructions,on primed surface and finished by means of trowels and flats, finished true levelled with existing adjoining rigid pavement, complete all as specified and directed.
Materials and Labour for,grinding including cutting of defective edge of existing rigid pavement,grinding of undulated portion of slab by mechanical means,finished true levelled with existing adjoining rigid pavement including removing all debries to a distance exceeding 100 Metres but not exceeding 200 Metres form starting point,loose particle to be cleaned with mechanical air blower,complete all as specified and directed. Note:-Grinding and cutting of the existing runway shall be done carefully and the Debris to be removed simultaneously leaving No FOD so as to ensure that the Runway is available for operation immediately.
Materials and Labour for preparation of old painted surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc.,painting lines,dashes,arrows, figures, letters,etc. on roads pavements and the like not exceeding 10cm wide with one coat of water based acrylic paint (white/golden/yellow/black/orange) as per manufacturer's instructions,complete all as specified and directed. Note:-Preparation of surface and painting of the existing runway painthig shall be done carefully and the Debris to be removed simultaneously leaving No FOD so as to ensure that the Runway is available for operation immediately.
Evergreen Firm
M/S Shankar Boro
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .