Reconstruction of Lala Dev Raj Market (Phase-II) and Bhagat Singh Market (Phase-V).

Amount

Dismantling RCC work/R.B.C in roof, floors (other than ground floors), beams, staircases, landing including reinforcement cut as required to facilitate demolition complete all as sp.in MES SSR 2020.

Dismantling Brickwork built in C Mortar as specified in MES SSR 2020

Removing of malba/dismantle material to a distance upto 05 KM.

Earth work in excavation in trenches n.exc. 1.5 M wide and 1.5M deep and getting out, returning filling in, including spreading & leveling in layers all as specified in MES SSR 2020.

M/L PCC bed 1:5:10 in fillings & Mass concrete all as specified in MES SSR 2020.

M/L brick work except brick in cement mortar 1: 4 straight or curved on plan exe. 6m mean radius with sub class ‘A’ bricks all as specified in MES SSR 2020. (including removing mortor from and cleaing bricks).

M/L brickwork with fly ash brick in C:M 1:4 straight or curved on plan exe. 6m mean radius with designation 75 bricks all as specified in MES SSR 2020.

S/F Reinforcement 8 mm dia & over cut to length bent to shape required size including cranking, bending & binding with M.S. annealed wire not less than 0.9 mm dia all as specified in MES SSR 2020.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of Foundation and Plinth Beams and similar work; vertical or to batter fair finished surface all as sp.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work 200 mm thick column, pillars, beams not exceeding 200 mm thick all as specified in MES SSR, 2020.

M/L RCC work 1:1½:3 for foundation including raft footing foundation beams plinths beams bases for columns basement slabs under reamed piles and mass concrete and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC works.

M/L RCC work 1:1½:3 for slabs supported on walls, beams and columns in floors, roofs, landing balconies, canopies deck slabs, columns, pillars and in shelves and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC works.

M/L sand filling under floors including watering & well ramming all as specified in MES SSR 2020.

M/L Rough flooring 25 mm thick in cement concrete 1:2:4 for laying tiles all as specified in MES SSR 2020.

M/L Rough flooring 40 mm thick in cement concrete 1:2:4 for laying tiles all as specified in MES SSR 2020.

M/L PCC floor in cement concrete 1:2:4 fair finished even and smooth without using extra cement (flooring 40mm thick) all as specified in MES SSR 2020.

M/L PC plaster 12 mm thick in cement mortar 1:4, fair finished even and smooth without using extra cement all as specified in MES SSR, 2020.

M/L PC plaster 10 mm thick on ceiling in cement mortar 1:4, fair finished even and smooth without using extra cement all as specified in MES SSR, 2020.

M/L Virified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed 20-25 mm thick complete all as sp. in MES SSR 2020

S/F of Pre-cast Kerbstone size 300x 300 mm x 100 mm in cement concrete 1:1.5:3 complete all as sp. in MES SSR 2020.

M/L glazed ceramic tiles 300 mm x 200mm or 300 mm x 300 mm x 7 mm thick etc. on walls set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR,2020 (including colored tiles).

Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type but with gear operated type with bevel gear box and crank handle complete all as specified in MES SSR, 2020 (1.25mm thick)

S/F framed work such as grills, grating, cattle traps etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters, trusses, MS bar fencing, walk wais; railings; frame work of water tanks and similar work confirming to Fe 410-0 or Fe 310-0 all as specified in MES SSR, 2020.

Providing & fixing 10-12 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface (RCC ceiling surface) with design as per requirement and approved by the Engineer-in-charge all as specified in MES SSR, 2020

Putty filling two coats application of one coat of Primer followed by two coats of premium Acrylic emulsion such as Asian/Nerolac/Berger or equivalent followed by preparing existing surface to smooth Interior finish all as sp.

M/L Putty two coats followed by one coat of primer followed by super fine roller coat finish of spectrum or equivalent to be applied with foam Roller, Finally coated with two coat premium exterior emulsion/Apex or equivalent all as sp.

S/F Aluminium Frame Made of Aluminium rectangular section of 1.3 mm Thickness of size 2 ½” x 1 ½” Complete including fixing of 5 mm thick Glass Black/Brown for windows, doors & partly fixed, partly openable frame complete all as specified in MES SSR 2020.

Bidder Name

Amount

A N BUILDERS (GSTN-06AADFA9365M1Z2) BID ID -3506756

R.D Builders (GSTN-NA) BID ID -3506827

Swastik Builders (GSTN-NA) BID ID -3503251

Hi Tech Builder (GSTN-NA) BID ID -3506907

KULWANT SINGH (GSTN-NA) BID ID -3506991

R.D Builders (BID ID -3506827)

Hi Tech Builder (BID ID -3506907)

A N BUILDERS (BID ID -3506756)

KULWANT SINGH (BID ID -3506991)

Hi Tech Builder (BID ID -3506907)

Swastik Builders (BID ID -3503251)

A N BUILDERS (BID ID -3506756)

KULWANT SINGH (BID ID -3506991)