SPL REPAIR TO BLDG NO. T-43 ( SINGLE OFFICERS ACCN) AT RAJOURI UNDER GE 862 EWS

Amount

S & F for repair for PVC (SWR) 110 mm bore pipe, single socketed, in any length with rubber ring joints laid in flooror trenches after dismantiling of cast iron or PVC or reinforced concrete drain pipe , jointed in CM and taking out of trenches, if required complete all as specified and directed.

S & F for repair for PVC (SWR) 75 mm bore pipe, single socketed, in any length with rubber ring joints laid in flooror trenches after dismantiling of cast iron or PVC or reinforced concrete drain pipe , jointed in CM and taking out of trenches, if required complete all as specified and directed.

110 mm bore PVC (SWR) bends any radius, complete all as specified and as directed.

75 mm bore PVC (SWR) bends any radius, complete all as specified and as directed.

S & F for repair Vitreous China, wash hand basin, flat back white of size 580mmx450mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, complete all as specified and as directed.

M & L in repair of PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified.

Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), dia of outlet 75mm, complete all as specified..

PVC connections 15mm size with PTMT nuts of length 450mm, in repair complete all as specified.

Rotationally moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position of capacity 1000 ltrs, fixed with PVC tank nipples, complete all as specified in SSR part-I including dismantling of existing tank and removing to store.

Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule for bore of pipe 15mm, fixed in repair complete all as specified.

Supply and fixing in repair Brass chromium plated shower rose of 125mm size with or without swivel joints, complete all as specified.

Stop valves, cast copper alloy, 15mm bore, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc. fixed in repair, complete all as specifed.

Gun-metal, globe or gate valves of 25mm dia, with iron wheel head, screwed both ends for iron pipe, fixed in repair, complete all as specifed.

S&F in repair for viterous china water closet pedestal pattern in one piece type of dimention 73cmX36cm74cm including seat cover and gaset, floor mounted, 'P' or 'S' trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements, complete all as specified and as directed.

Supply and fix in repairs of CP brass WHB mixers for hot and cold water mixing of 15mm dia screwed down for iron pipe complete all as specified and directed.

Supply and fix in repairs of CP brass wall mixers 3 in 1 two for hot and cold water mixing and one for shower rose of 15mm dia screwed down for iron pipe complete all as specified and directed.

S&F in repair for 15mm bore two way bib tap cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

CP Towel rack 600 mm long with lower hangers including taking down old, complete all as specified.

Soap dish, brass chromium plated, including taking down old, complete all as specified.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified.

Taking out existing 15 mm bore GI tubing including all fittings such as valves, connections, etc. from trenches, complete all as specified.

Taking out existing 20 mm bore GI tubing including all fittings such as valves, connections, etc. from trenches, complete all as specified.

GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., in old existing or new routes, laid in trenches , in wall , celing or under roads, bore of pipe 15 mm, complete all as specified & directed.

GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., in old existing or new routes, laid in trenches , in wall , celing or under roads, bore of pipe 20 mm, complete all as specified & directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Glazed ceramic coloured tiles in vertical surface of size 450x 350x 7 or 350x250x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 10mm thick plaster of cement mortar 1:3, complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.

Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified.

Demolition of cement concrete of any description in any position not otherwise specifically provided for, complete all as specified.

PCC 1:3:6, nominal mix, type C-1, using 20mm graded crushed stone aggregate as in coping and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Water proofing treatment to sunken portion (floor and wall) of WCs, bathroom etc by :- (a) Complete removal of existing filling and treatment over RCC slab and making a slope of 1:8 in and including PCC 1:2:4 with minimum thickness 30mm using 12.5mm graded stone aggregate and providing all wall and floor joints with coved fillet in PCC 1:2:4, having a radius of 70mm. (b) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (c) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (d) Sealing of joint of Trap/WC/Soil pipes with sealing compound .

water proofing treatment over RCC roof incl projections incl complete removal of M&L for complete removal of existing water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Rendering 10mm thick in cement mortar 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 2% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (c) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm. APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed. (iii) Rate of WPC will be included in the quoted rate.

Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed.

15mm thick plastering in cement mortar 1:4 on stone wall, surface finished even & smooth without using extra cement, using integral water proofing compound as per manufacturer,s instructions, complete all as specified. Nore : Integral water proofing compound shall be measured & paid seprately.

Supply only liquid water proofing admixture, complete all as specifed.

10 mm thick plastering in cement mortar 1:3 on concrete surfaces of ceiling, surface finished even and smooth without using extra cement, complete all as specified.

Preparation of new plastered surfaces of wall and applying two coats of weather proof paint of apex ultima over a coat of primer, complete all as specified.

Preparation of new plastered surfaces of ceiling and applying two coats of distemper oil emulsion , complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed.

Taking down chowkats or frames with shutter(without taking off shutter from the frame) area n exc. 1.5 sqm complete all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square, complete all as specified and shown on drwaing in SSR Part-II (2020) directed.

Powder coated Anodised aluminium frame for doors, windows, ventilators & partition with one or more rebates including joining cleat for fixing etc. complete all as specified..

Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

Sheet glass 5.5mm thick, ordinary quality and fixed with aluminium & rubber beading in square n exc 0.5 sq. m in each pane complete all as specified.

Stainless steel wire cloth of 0.50mm nominal dia of wire and average width of aperture 1.4mm and fixed with wire galvanised wire staples including cutting, welding etc for steel windows/ventilators complete all as specified and direceted.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and as directed.

100mm long mild steel butt hinges medium weight (ISI marked), fixed to PVC doors, complete all as specified and directed.

150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked), complete all as specified and directed.

125 mm long extruded aluminium alloy handles size fabricated type anodised (ISI marked), complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

Mirror polished kota sotne slab flooring 20-22 mm thck over and including 20 mm thick screed in Cement morter1:3 and jointed with grey cement slurry mixed with pigment including table rubbing ,cutting and mirror polishing all as spd and directed by Engr-in-charge

Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications complete all as specified and directed.

Point wiring for one light point/fan point /Exhaust fan point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor two single core multi strand flexible cable and 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core cable (green color) as earth lead and including PVC conduit along with modular sunken boxes of reqd size with modular white cover plate with frame including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified. Note:- The rates are inclusive of cutting / chassis in wall & suitable PCC works including making good to disturbed surfaces.

Description all as per srl item No. 58 above but for socket out 5 Amps on same board complete all as specified and directed.

Description all as per srl item No.58 above but for socket outlet 5 Amps on independent board complete all as specified and directed.

Description all as per srl item No. 58 above but for one bell point controlled by one push button complete all as specified.

Description all as per Serial item No 58 above but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead complete all as specified and directed.

S&F modular switch piano, single pole, one way 6 Amp, 1 module, 240 volts complete all as specified and directed.

S&F modular switch single pole, one way 16 Amp, 1 module, 240 volts complete all as specified and directed.

S&F Socket modular socket outlet 2 in 1, 3 Pin 6 Amp 2 module complete all as specified & directed.

S&F modular socket out let 2 in 1, multipurpose 6 & 16 Amp 2 module complete all as specified & directed.

S&F modular fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.

S & F ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm. complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver suitable for roof/ceiling including connecting up with driver three core flexible copper conductor cable of suitable size including removing old/unsv complete all as specified.

M&L for LED Tube light fitting, 1x 20 watts. Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, Premium 20 W LED batten, connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core, including removing old/unsv, all as required at site or directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including removing old/unsv, all as required at site or directed.

Supply and fixing LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including removing old/unsv, all as required at site or directed.

Taking out unserviceable ceiling fan and deposit to MES Store, supply and replacement with ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod and electronic regulator alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified.

M&L for exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 300mm sweep having power input 70W speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed.

M&L for sheet metal enclosure MCB distribution board, double door TPN 4 way confirming to IP 43-IK complete with din rail, Neutral and Earthing bar with 200 amps 415V rated busbar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing including removing old/unsv, all as specified and directed. (Note:- MCBs will be measured separately.) S & F MCB DB TPN 4 way 415 V double door complete all as specified.

S & F miniature circuit breaker (MCB) TPN, 63 Amp, 415V, 10KA 'B' curve in the DB complete with connection testing and commissioning including removing old/unsv,complete all as specified and directed.

M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, all as specified and directed. (Note:- MCBs will be measured separately.)

M&L for MCB single pole and neutral 240 volts any rating upto 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables,including removing old/unsv,complete all as specified and directed.

S & F miniature circuit breaker (MCB) SP, 5 to 32 Amp, 240V, 10KA 'B' curve in the DB complete with connection testing and commissioning complete all as specified.

M&L in for submain wiring with two single core PVC insulated unsheathed, FRLSH flexible copper conductor cable of size 6 sqmm and one single core PVC insulated unsheathed, FRLSH flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including PVC casing caping/ non metallic rigid PVC conduit medium grade and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and as directed.

Supply and laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 25 sqmm 4.0 core confirming to IS 7098 (Part-I):1988 laid on trenches/wall/floor or passing through cable duct/trunking and suitable size of lugs, connection with existing LT panels and testing on completion including removal of unsv / old cable complete all as specified.

M&L for 75mm dia High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, for road crossing of cable or for cable protection laid in trenches or above ground surface all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in PCC M-15, type B-I using 20mm graded crushed stone aggregates with 40mm thick precast cover of size 550 mm X 550 mm X 75 mm of RCC M-15, type B-I, reinforced with XPM (weight not less than 4 kg/ Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m deep in any type of soil for laying of underground cable, foundation of poles & stays etc., and getting out, complete all as specified and as directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specifed.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified.

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 27 of tender doucments.

M/S BADRI NATH GUPTA (BID ID -3360545)

MS AAMIR FAROOQ BHAT (BID ID -3370202)

M/S Ramesh Chander Gandotra & Sons (BID ID -3370238)

M/s Parvesh Gupta (BID ID -3370397)

M/s Anil Engineers & Builders (BID ID -3362247)