CONSTRUCTION OF COMPOUND WALL IN TARASAMIYA AANGANVADI KENDR NO. 159/1 AT TARASAMIYA, BHAVNAGAR.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil

SOR - 2024-25 item code - 04001A

Boring holes 3.5 m deep in ordinary soil (for cast in

situ piles) and getting out the soil and disposal of

2 the surplus excavated soil as directed within a lead 75.00 1561.19 Cum

of 50 Meter for following diameter of pipes.(iii)

SOR - 2024-25 / item code - 04010C /

Extra for under reaming inside the bore Holes for

3 under reamed piles of following Diameter.(iii) 300 75.00 664.51 Cum

SOR - 2024-25 / item code - 04011C /

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

4 aggregates 20 mm nominal size) and curing 78.00 4075.35 Cum

complete including cost of formwork in (A)

Foundation and Plinth (upto 10 ton)

Providing laying controlled cement concrete M-250

and curing complete including the cost of form work

5 but excluding the cost of reinforcement for 20.00 6949.81 Cum

reinforced concrete work in GROUND BEAMS /

Providing laying controlled cement concrete M-250

and curing complete including the cost of form work

but excluding the cost of reinforcement for

reinforced concrete work in COLUMN

Providing laying controlled cement concrete M-250

and curing complete including the cost of form work

7 but excluding the cost of reinforcement for 9.00 6260.99 Cum

reinforced concrete work in COPPING FOR ALL

Brick work using common Brunt clay building bricks

having crushing strength not less than

8 Kg./Sqcm. In foundation and plinth in cement 17.00 4279.98 Cum

mortar 1:6 (1cement : 6 fine sand) (B) Conventional

(up to 10 ton )

SOR - 2024-25 / item code - 06002BA /

Extra for brick work in superstructure above floor

9 two level Item No. 1(6.12) (B) Conventional (upto 51.00 4568.40 Cum

SOR - 2024-25 / item code - 06006B /

No ITEM QTY UNIT AMOUNT

20mm thick sand faced cement plaster on walls

upto height 10 metres above ground level

10 consisting of 12mm thick backing coat of C.M. 1:3 793.00 350.57 Sqm

(1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

SOR -2024-25 / item code - 17009 /

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

11 surface to remove all dirt, and remains of loose 793.00 122.14 Sqm

powdered materials.etc complete The material shall

be as described in list of approved material.shade

SORpattern as directed

- 2024-25 by Architects/City

/ Item code - 19031 Engineer

Providing & fixing M.S. grills of required pattern

using M.S. flats, bright bar, hollow MS sactions at

12 required spacing and frame all-round square or 370.00 116.15 Kg

round bars with round headed bolts and nuts or by

screws. Design and pattern as directed by Architect

Providing TMT Bar FE 500D reinforcement for

13 R.C.C. work including bending, binding and placing 10900.00 77.29 Kg

in position complete upto floor two level

Govt. R&B / SOR - 2024-25/ item code - 05014C /

Providing and fixing pre-cast Rubber Dye / steel

Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP

63-2018 etc.Complete.

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250 grade

15 concret as per approved design and including 40.00 374.92 Rmt

excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc

Govt. R&B / SOR - 2024-25/ ch-14-14032 / Page

16 supplying quary spauls. 140.00 381.78 Cum

BMC/ROAD DEPT+/ TENDER WORK-2023-24 /

Spreading of quary spuls, murram & machine

BMC/ROAD DEPT+/ TENDER WORK-2023-24 /

Rolling and consolidation of soling including filling

18 in depression which occur during the process, with 800.00 8.08 Sqm

power roler 8 tonne to 12 tonne.

BMC/ROAD DEPT+/ TENDER WORK-2023-24 /

No ITEM QTY UNIT AMOUNT

Supplying & Fixing 600 mm dia hot dip galvanising

cross spiral type razor edge concertina coil having

80 circles, 200 clips with optimum openable

strentch of 8m length using a central core wire high

corbon spring steel (High tensile wire) made up of

2.6mm dia as per IS:4454, Part-1, grade-1-II having

minimum galvanising of 230-250 gsm per mm2

aroung which a edge of razor sharp barbs strip of

5mm thick & 19mm width confirming to IS:513DD

quality having minimum galvanizing coating of

microns with series of barbs punched along the

length at regular interval support / tied with two

rows of barbered runner wires to newly proposed

MS / GI angle brackets at top and one runner wire

at the bottom with U nails & clips etc complete as

per manufacturers specification and directed by

EIC. (The item rate does not include the rate of MS